REPAIR/MAINT OF JOINERIES, PLASTERING, FLOORING, ROOFING, PLUMBING, ETC AT BORJAR, AMINGAON AND SADILAPUR AREA UNDER GE GUWAHATI

Amount

Taking down chowkats or frames (without taking off shutter from the frame) not exceeding 1.5 sqm each complete all as specified & as directed.

Taking down chowkats or frames (without taking off shutter from the frame) exceeding 1.5 sqm but not exceeding 4 sqm each complete all as specified & as directed.

Taking down shutters of any description not exceeding 1 sqm each and removing to store complete all as specified & as directed

Taking down shutters of any description exceeding 1 Sqm but not exceeding 2 Sqm each and removing to store complete all as specified & as directed

S&F, second class hard wood, plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.

S&F, 30mm thick, flush shutters, solid core construction, with particle board core and plywood face panels, both faces covered with decorative face veneer with lipping/frame to match complete all as specified & as directed.

S&F, 35mm thick, 2nd class hard wood, Glazed & Skeleton shutters, open rebated & prepared to receive glass, gauze, etc (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc sizes of member of shutter as specified in SSR Part I, section 8, clause 8.24(a), fitted to chowkats complete all as specified and directed.

S & F 30 mm thick 2nd class hard wood glazed and skeleton shutters, divided into squares, open rebated and prepared to receive glass, gauze, etc, (with sash bars),edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass,etc, sizes of members of shutters of windows , ventilators, etc are provided with stiles and rails as specified in SSR Part -I. section 8, clause 8.24(b) complete, all as specified and as directed.

S&F, Factory made solid panel PVC door shutter, 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement complete all as specified and as directed.

S&F, Solid PVC frame of size 50mmx47mm made out of 5mm plain colour PVC sheet re-enforced with MS square tube complete all as specified and directed

M&L, Preparation of new wood and wood based surfaces of any description, over 10 cm in width or girth and applying two coats of synthetic enamel paint over and including a coat of pink primer complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames, glazed with putty or fixed with beads complete, all as specified and as directed.

M&L, 3mm thick sheet glass, ordinary quality and glazing with oil putty in square not exc. 0.5sq.m in each pane complete all as specified and directed.

M&L, 3mm thick sheet glass, ordinary quality, frosted on one side, and glazing with oil putty in square not exc. 0.5sq.m in each pane complete all as specified and directed.

S&F, Mild steel barrel tower bolts, stove enamelled black, with bright 200mm long bolt complete all as specified and directed

S&F, Mild steel barrel tower bolts, stove enamelled black, with bright 125mm long bolt complete all as specified and directed

S&F aluminium anodized barrel tower bolts 125mm long, of extruded section and fixed complete all as specified and directed

S&F, Aluminium alloy,anodised, sliding door bolt, length of bolt 300mm, with hasp, staple (bolt type), and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed.

S&F, Aluminium handles, 150mm size, cast type, anodised, complete all as specified and directed.

S&F, extruded aluminium handles, 125mm size, fabricated type, anodised, complete all as specified and directed.

S&F, Butt hinges, size of hinges 100mm, medium weight, cold rolled mild steel complete all as specified and directed.

S&F, Butt hinges, size of hinges 75mm, medium weight, cold rolled mild steel complete all as specified and directed.

S&F, Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanised wire staples complete all as specified and directed.

S&F, in repair Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanised wire staples complete all as specified and directed.

Dismantling of Wall and ceiling boards (fibre,pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets and scantaling.

M&L false ceiling with 10 mm thick 600mm x900mm plaster of Paris sheets fixed with machine screws on and including GI channel 18 gauge thick grid work, main joists placed at 750 mm centre to centre , cross joists placed at 450mm centre to centre, hanging with 6mm dia GI wire suspenders from roof, ‘J’ hooks bolts and nuts etc and treating the POP sheets with thin layer of POP with Gypsum anhydrous binder and prepare the surface till smooth surface is achieved; and applying two coats of plastic emulsion paint over a coat of primer matching with the colour of ceiling sheets all complete as required as per manufacturer’s instructions and as directed .

Dismantling Asbestos cement (corrugated, semi corrugated, etc.) sheets in roof coverings including ridge or similar pattern roof coverings complete all as directed.

S&F, in repair, 6mm thick, asbestos cement, corrugated or semi-corrugated sheets fixed with L-type or J-type or cranked hook bolts and washers, in roofs complete all as specified and as directed.

Dismantling Corrugated steel Sheets any gauge, thickness, Nainital or Similar Pattern Roof Coverings , complete all as directed.

S&F, Galvanised, corrugated mild steel sheeting, 0.63mm thick, with grade of zinc coating 275, with two corrugations side lap, fixed with L-type or J-type or cranked hook bolts and washers, in roofs complete all as specified and as directed.

S&F, 0.63mm thick plain galvanized mild steel sheeting in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 all as sp[ecified and directed.

S&F, Pre-painted galvalume aluminium zinc coating GI based corrugated/semi corrugated steel sheet 0.50mm thick of approved colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

S&F, Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of approved colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

S&F 2nd class hardwood in scantlings, clean sawn, timber fixed after dismantling of existing damaged scantling of unframed work complete all as specified and as directed.

M&L for preparing wooden surfaces of any description and girth and treated with two coats of creosote oil complete all as specified and as directed.

M&L Brick work with sub-class 'B' bricks, straight or curved on plan to any radius in full brick thick walls, built in cement mortar 1:6 including demolition of old bricks complete as specified and directed.

Taking down cement plaster from brick or stone walls, etc including raking out joints, haking for key, scrubbing down with water, etc complete all as specified and as directed.

M&L, Rendering cement plaster in two coats, first coat 10mm thick in cement mortar (1:4) on brick work or concrete surfaces and second coat 5mm thick in cement mortar (1:4) mixed with liquid water proofing compound @ 200ml/50Kg of cement as per manufacturer instructions, finished even and smooth without using extra cement complete all as specified and directed. Note:- Supply only water proofing compound shall be measured and paid separately.

Supply only Liquid water proofing compound all as specified and directed.

M&L, rendering cement plaster 10mm thick in cement mortar (1:6) on stone masonry or other than fair faces of brick work or concrete surfaces, finished even and fair without using extra cement complete all as specified and directed.

M&L for preparing of new plastered or un-plastered wall surfaces and applying two coats of oil bound distemper over and including two coats of wall care white cement putty (1.5mm thick) complete all as specified and directed.

M&L, Three coats of white washing including preparation of newly plastered wall surfaces complete all as specified and directed.

Demolition of concrete in ground floors & paving not exc 15cm thickness (below or above ground level) complete all as specified.

M&L for 75 mm thick PCC 1:3:6 type C-1 (using 20mm graded stone aggregate) as in plinth protection including making joint at every 3 mtr interval and at corner and filled with mixture of bitumen and sand and finished even and fair and laid in alternate bays complete all as specified and directed.

Dismantling floor hearth wall tiling including cement mortar bedding (but not backing removing serviceable tiles to store and rubbish at the premises complete all as specified and directed.

M&L for coloured non skid ceramic tiles, 7 to 8 mm thick, (square/rectangular), area of each tile exceeding 0.18 sq.m but not exceeding 0.38 sq.m in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including screed bed or bedding layer of 15 mm thick cement mortar (1:6) complete all as specified and directed.

M&L for coloured non skid ceramic tiles, 7 to 8 mm thick, (square/rectangular), area of each tile exceeding 0.11 sq.m but not exceeding 0.18 sq.m in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over screed bed or bedding layer of 15 mm thick cement mortar (1:6) complete all as specified and directed.

M&L for glazed ceramic coloured tiles of size 450mm x 350mm x 7mm on vertical surface such as skirting, dados, risers to steps etc, set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, over and including rendering 10mm thick in cement mortar (1:4) and also including dismantling of old wall tiling (including cement mortar bedding) and rubbish off the premises complete all as specified and directed.

S&F, in repair, doom brass cromum plated, Grating,100mm size fixed with cement mortar complete all as specified and directed.

S&F, in repair, 15mm bore, steel water tubes, medium grade, galvanized, with all fittings and fixed to walls and ceilings or laid in floors complete all as specified and directed.

S&F, in repair, 20mm bore, steel water tubes, medium grade, galvanized, with all fittings and fixed to walls and ceilings or laid in floors complete all as specified and directed.

S&F, in repair, 25mm bore, steel water tubes, medium grade, galvanized, with all fittings and fixed to walls and ceilings or laid in floors complete all as specified and directed.

Taking down eaves gutters and rainwater pipes (any size or patters) incl all fittings, stays etc complete all as specified and directed.

S&F, in repair, 110mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints fixed to walls including stack clamp complete all as specified and directed.

Supplying, hoisting, fixing in position and connecting, in repair, 500 litres capacity rotational moulded polyethylene water storage tank (cylindrical, vertical with closed top) including fixing arrangement for inlet/outlet/over flow and vent pipe of standard sizes all as specified in SSR Part-I complete all as specified and directed.

Supplying, hoisting, fixing in position and connecting, in repair, 1000 litres capacity rotational moulded polyethylene water storage tank (cylindrical, vertical with closed top) including fixing arrangement for inlet/outlet/over flow and vent pipe of standard sizes all as specified in SSR Part-I complete all as specified and directed.

S&F, in repair, 25mm dia, Drapery rod, made of aluminium alloy of minimum thickness 1mm painted with vapocure paint technology for colour retention, stain and chalk resistance the finials and rings in matching colours with an option of metallic golden finish complete with brackets, knob and rings, all as per sample kept at office complete all as specified and directed.

S & F in repairs vitreous China squatting pan of pattern 'long pan' size 580 mm white with 'P' or 'S' trap front or back inlet and foot rests any pattern(excluding flushing cistern and flush pipe) complete all as specified and directed.

S&F, in repair, vitreous china wash down water closet pan (Pedestal pattern), white with 'p' or 's' trap with fixing bolts (excluding flushing cistern and flush pipe), including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe etc. complete all as specified and directed.

S&F, in repair, Vitreous china wash basin, white, flat back of size 580mm x 450mm excluding chain & plug, taps, waste pipe and porcelain stopper but including brackets grouted in cement mortar 1:2 in wall complete all as specified and directed.

S&F, in repair, plastic water closet seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminium hinging device complete all as specified and directed.

S&F, in repairs, 10 litres capacity, PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet ball valve, float and handle including brackets and connection to pipe or lever etc with PVC connection 15 mm size with PTMT nuts of length 450 mm, complete all as specified and directed.

S&F, in repair, chromium plated, Toilet paper holder complete all as specified and directed. As per Cat No ACN-1153N of Make : Jaquar or equivalent as approved by GE from the makes mentioned in Appx 'C'.

S&F, in repair, 20mm bore, ball valves high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed complete all as specified and directed.(Minimum weight 210 Gms)

S&F, in repair, 25mm bore, ball valves high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed complete all as specified and directed.(Minimum weight 455 Gms)

S&F, in repair, Brass chromium plated, tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed.

S&F, in repair, 20mm bore, Gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F, in repair, 15mm bore, bib taps, cast copper alloy with crutch or butterfly handle, chromium plated, screwed down, screwed for iron pipe or brass ferrule complete all as specified and directed.

S&F, in repair, 15mm bore, stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipes or for unions complete all as specified and directed.

S&F, in repair, 20mm bore, stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipes or for unions complete all as specified and directed.

S&F, in repair, 15mm bore, Bib tap, standard of PTMT, any colour, high pressure, screwed for iron pipe and fixed complete all as specified and directed.(Minimum weight - 90 Gms)

S&F, in repair, 15mm bore, Pillar tap, cast copper alloy, with capstan head, chromium plated, screwed down, high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe and fixed complete all as specified and directed.

S&F, in repair, PVC connection 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed.

S&F, Mild steel works as in bands, straps, supports or stays for rainwater pipes, includings bolts, if required hooks (stays), heavy, for large gates, hook & pintle hinges, large hasps & staples, clamps & hold fasts, wall ties, hooks for hanging ceiling fans and similar small articles conforming Fe-410-O or Fe 310-O Gde E-165 complete all as specified and as directed.

S&F, in repair, kitchen or laboratory sink (without drainage board) made of stainless steel 1mm thick with plug, washers and waste including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, over all size 495mm x 420mm, bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S&F, in repairs, vitreous china half stall urinal, size 580x380x350 mm minimum, flat back, white, with grating and union for discharge pipe complete (excluding flushing cistern, flush pipe and waste pipe) and bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement complete all as specified and directed.

M&L for preparation of old decorated plastered/unplastered surfaces of walls by using electric sander machine or steel wire brushing, scraping down smoke soot,moulds, moss & efflorescent salts, trading oil or greasy spots and applying one coat of cement base paint complete all as specified and directed.

M&L for preparation of old decorated plastered/unplastered surfaces of ceiling surface by using electric sander machine or steel wire brushing, scraping down smoke soot,moulds, moss & efflorescent salts, trading oil or greasy spots and applying one coat of cement base paint complete all as specified and directed.

M&L for preparation of old surfaces of walls by using electric sander machine or steel wire brushing, scraping down smoke soot,moulds, moss & efflorescent salts, trading oil or greasy spots and applying one coat of oil bound distemper complete all as specified and directed.

M&L for preparation of old surfaces of ceiling by using electric sander machine or steel wire brushing, scraping down smoke soot,moulds, moss & efflorescent salts, trading oil or greasy spots and applying one coat of oil bound distemper complete all as specified and directed.

M&L preparation of old or new iron and steel surfaces of any description, exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide, zinc chrome primer complete as specified and directed.

G.R CONSTRUCTION

M/S PRADYUT ENTERPRISE

M/S SEWAK SINGH

M/s KRISHNA CONSTRUCTIONS

M/S K Nath and co