15th FC HG - HSC building - Rajadhanii

Amount

Earthwork excavation for foundation ( for narrow excavation to full depth as per designed in all soils and sub soils except soft disintegrated rock not requiring blasting and hard rock requiring blastering and bailing water wherever necessary. Refilling the sides of foundation with excavated earth other than sand in layers of well rammed and compacted and depositing the surplus earth in places shown by the departmental officers with an initial lead of 10 m and initial lift of 2m and claearing and leveling the site etc., complete complying with clearing and leveling the site etc., complete complying with standard specificaton.

Supply and filling in foundation, basement, etc with filling M- sand in layers of not more than 15 cm thick well watered, rammed and consolidated etc, complete complying with standard specification and as directed by the departmental officers.

Plain cement concrete 1:4:8 - one part cement : four part sand : Eight part hard broken stone jelly using 40 mm gauge hard broken granite stone jelly for foundation including dewetering wherever necessary and laid in layers of not more than 15 cm thick, well, rammed, consolidated and cuing etc., complete complying with standard specification.

Refilling the approved good quality earth in plinths, area development etc., wherever specified in layers is not exceeding 200 mm thick with available earth at site.

Collection and supply of gravel from appd quarry including cost and conveyence of all materials to site including all labour charges for filling etc. complete.

Supplying and erecting steel centering including necessary supports for plane surfaces for reinforced cement concrete works such as column footing, column, pedestals, plinth beams, grade beams, staircase steps etc. which require only nominal strutting using mild steel sheets of size 90 x 60 cm and 10 BG stiffened with welded Mild Steel angle of size 25mm x 25mm x 3 mm for boarding laid over silver oak joists of size 10cm x 6.50 cm spaced at abote 75 cm centre to centre or at suitable intervals etc., complete in all floors complying with standard specification ( payment for centering shall be given after the concrete in laid ).

Upto Basement

Ground Floor

Column

Providing and laying in position machine batched, machine mixed and machine vibrated design mix cement concrete of M25 grade for reinforced cement ratio with plasticizer using 20mm and down concrete structural elements under controlled water graded machine broken granite stone jelly excluding the cost of centering and shuttering and reinforcement but including curing fixing fan clamps etc., as per standard specification and as directed by the departmental officers comple -1m3

Upto Basement

Ground Floor

Supplying, fabricating and placing in reinforcement steel of high yield strengh ribbed bars of various diameters and grade conforming to IS 1786 for reinforced concrete work. The work includes decoiling, straightening, cutting bending fabricating and placing in position at all levels including lead and lift according to drawing, specification etc., complete and supply and use of 18 G black annealed binding wire double fold to tie the bars in position, chairs, pins spacer bars unauthorised laps which will not be measured separately neither for payment nor for reconciliation and providing precast cement / PVC cover blocks for main reinforcement to ensure specified cover, and as directed.

Brick work in following Cement Mortar 1:5 using best quality II class ground moulded chamber burnt bricks of size 9" x 4-3/8" x 2-3/4" for foundation and basement including curing, etc., complete complying with standard specifiction. Including scaffolding curing cost of reinforcement etc., all complete as per specification and drawing as directed by the engineer in- charge.

Foundation basement Brick Work.

Ground Floor Super structure

Brick Partion walls of 11.50 cm thickness using best quality II class table moulded bricks 9" x 4-3/8" x 2-3/4" in cement mortar 1:3 ( one cement and three sand ) using Hoop iron reinforcement if found necessary including curing, etc., complete and as directed by the departmental officers. ( Hoop iron reinforcement will be measured and naid for separatly.

Ground Floor

Providing and applying 10 mm thick cement plaster in CM 1:3 (one part of cement and three parts of sand ) tp finishing the exposed surfaces of RCC items of works such as roof or floor slabs, level including scaffolding hacking of surface, chiselling the undulated surface wherever necessary and curing etc., all materials and labour complete in all respected including all lead, lift and descent and as directed by the engineer in charges. This rate includes the cost of providing cement mortar beadings for sun shades steps landing slabs elevation etc., complete complying with standard specfications.

Providing and applying 12 mm thick cement plaster in CM 1:5 ( one part of cement : five part of sand ) to walls internally and externally in single coat at all levels to correct line and level including chicken wire mesh at all joints of bricks and concrete surfaces with minimum overlap of 150 mm in all directions, scaffolding, rounded off or champhering of corners, offsets, fin/ bands, projections etc., and cleaning of surfaces raking out joints, roughening of surface chiseling the undulated surface wherever necessary and curing etc., all materials and labour complete in all respects including all lead lift and descent and as directed.

Paving the flooring with scratch Proof ceramic tiles of size 305 X 305 X 6 mm including cost and conveyence of all materials to site and all labour charges etc., complete.

Dadooring the walls with coloured dadooring ceramic tiles of size 300mm X 450mm x 8 mm approved size, quality and colour set in CM 1:2-10 mm thick. And ponted with suitable cement including finishing the joint and pointing flesh with walls and tile surface in all floors as the rate of 0.40 kg/sqm etc. complete.

Paving the flooring with pre-polishing concrete anti-skid step tiles ( Required shape and design ) of 20 mm thick of approved quality and colour laid in cement mortar 1:3 ( one cement and three sand ) 20mm thick and pointed with white cement mixed with colouring pigment at the rate of 0.40 kg./sqm curing etc., complete complying with standard specification and as directed by the departmental officers ( the make and brand of the tiles should be got approved by executive engineer before use an worked.

Providing, Fabricating and fixing M.S gills windows, and ventilator, gates, ladders, rail pipes, nosing angles with M.S lugs in staircase steps etc., made out of M.S rods. Flats, angles. Pipes, channels etc., including necessary fixtures complete as per drawings and specifications and as directed by the engineer.

Supply and fabrication of UPVC door including cost and conveyence of all charges etc., complete.

Solid PVC door shutters toilet door using 19 gauge 19 mm MS square tubes for styles and outer frames 15 mm MS square tubes for top,lock and bottom rails the steel tubes shall be covered with 5 mm thick solid PVC sheet.shutter using 5 mm thick solid PVC sheets for panelling shall rigidly fixed in position including necessary furniture and fittings. the over all size of styles shall be 50 mm x 30 mm. the over all size of top rail, lock rail and bottom rail shall be 75mm x 30 mm. the over all size of frames shall be 50 mm x 45mm, with suitable rabate for houseing the shutter.

UPVC window supplying and fixing UPVC ( un- PLASTICIZED Polyvinyl chloride) windows of casement type ( open ) from the profile the size of outer frame 60 mm x 58 mm and shutter profile are reinforcement with gi/1 mm 125GSM and 100% corrostion free, the profiles are multi chamberedcv section with wall thick of 2 mm. The EPDM rubber (Black colour) covered with over all the edges of frame and shutter the shutter will be provided with espag multi power points locks and also it operate as handle.The corners and joints should be welded and cleaned. Radiations free pin headed plain or browncolour glass 4 mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action. security protective hinges, strong locking systems and as per size for arresting noise and energy loss, the connecting mechanism, between sah and outer frame that enables opening of the window should be fixed to the wall with 100 % packing with screw.

UPVC VENTILATORS supplying and fixing UPVC ( Un- PLASTICIZED Polyvinyl chloride) Louvered Ventilators of from the profile the size of outer frame 60 mm x 58 mm and shutter profile the size of 60 x 58mm both profile size of 60 x 78 mm both profiles are reinforcement with gi/1 mm 125GSM and 100% corrostion free, the profiles are multi chamberedcv section with wall thick of 2 mm. The EPDM rubber (Black colour) covered with over all the edges of frame and shutter the shutter will be provided with espag multi power points locks and also it operate as handle.The corners and joints should be welded and cleaned. Radiations free pin headed plain or browncolour glass 4 mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action. security protective hinges, strong locking systems and as per size for arresting noise and energy loss, the connecting mechanism, between sah and outer frame that enables opening of the window should be fixed to the wall with 100 % packing with screw.

Painting two coats of synthetic enamel paint of approved colour and make over one coat of anti corrosive zinchromite primer over new wood / steel work, suitably prepared for receiving the paint by surface scraping, rubbing applying filter etc., including cost of filter, Primer,paint all complete as per drawings and specifications.

Supplying and painting the walls with two coats of oil bound distember over one coat of water based cement primer including cost for distemper, primer, cleaning and scrapping the walls, rendering the walls smooth with necessary putty, brushed, scaffolding arrangements, labour charges etc., as per standard specification. ( The colour and shade of the distemper shall be got approved by the executive engineer before use of work).

Painting two coats of newly plastered wall surface with ready mixed plastic emulsion paint of first class quality and of approved colour over a priming coat including through scrapping, clean removal of dirt, and including necessary plaster of pairs putty, wherever required etc., complete complying with standard specification.

Wheatering course concrete using best quality broken brick jelly of 20 mm uniform guage in pure slaked lime ( No sand to be used ( over the RCC roof slab in the proportion of brick jelly to lime being 32 : 121/2 by volume laid over in single layers and consolidated to the required slope and finished thickness and beating the concrete with woodern beaters of approved pattern, Keeping the surface constanly wet by sprinkiling lime, jaggery water etc., complete complying with standard specifications and as directed.

Finishing the top of roof with one course of machine pressed tiles of size 230mm x 230mm x 20mm of approved quality set in cement mortar 1:3 ( one cement and three sand ) 12 mm thick mixed with water proofing compound conforming to ISS at 12% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing erc., complete complying with standard specification and as directed by the departmental officers.

Supplying and fixing in position C.I Manhole covers ( heavy duty ) mof various sizes of best approved quality and as per standard specifications etc., complete 0.6x0.6 M size etc., complete.

Sanitary and Water supply Arrangements

Supplying and fixing in position best approved quality ( Oriya type) white indian type water closet 530 mm x 440 mm white glazed earthen ware of approved quality and brand with "p" or "s" trap conforming to BIS with sand cushion and forming flooring allround the closet using 40 mm broken brick jelly in lime concrete 1:2:5 ( one lime, two sand and five brick jelly )100 mm thick and finishing the top to the required slope and including giving necessary connection to CI soil pipes ( including the cost of 100 mm dia CI pipe for a lengh of 600mm ) by dismantling brick masonry wall / reinforced cement concrete roof/ floor slab.

supplying and fixing of indus floor mounted white colour european water closet parryware or equivalent with seat vocer and dual flush ( 3 and 6 lit) cistern having P trap with seat cover, Supplying non corrosive hinges, CP Bolts, Nuts washes Providing and fixing dash anchor fastners with bolt / L - brackets with anticorrosive paint cuttering grooves in masonry or concrete surfaces, grounding with cementcincrete 1:2:4 mix, using 20 mm size stone jelly, restoring the damaged portion to their original condition using required material, fixing the water closet to perfect level, alignment, testing etc., complete.

Providing and keeping in stores, shifting to the place of installation, Fixing, testing and commissioning of white coloured vitreous china under counter regulator rectangular wash basin with brackets / GI rag bolts and nuts painted, 32mm dia brass C.P waste coupling ( heavy ) 32 mm dia brass C.P Bottle trap, 15mm dia brass C.p angle stop cock with flange, 15mm dia brass C.P cold water connecting pipe etc., the work shall included required extension nipples, cutting / chasing and making good the walls and floors- toilets wash basin.

Supply and fixing PVC pipes for sanitary arrangement of following dia meter etc., Complete.

110 mm PVC Pipe

75 mm PVC Pipe

110 mm Pvc Door bend

110 mm Pvc elbow

110 mm pvc tee

75 mm Pvc Elbow

75 mm Pvc Tee

110 mm Pvc Ventilating shaft

PVC nahini trap of size 100x75 mm

Supplying and fixing water supply arrangement od GI Pipes and specials.

32mm GI Pipe

25 mm GI pipe

32 mm GI elbow

25 mm GI Elbow

32mm GI Tee

25mm GI Tee

32mm GI Coupling

32mm GI Tank nipple (LR)

32mm GM Gate Valve

32mm Hex nipple

SS Elbow action tap of size 15mm

SS sink

supplying and fixing of PVC water storage tank of best approved quality and make of super thick with lid of capacity of 1000 litres with accessories including giving necessary connection etc., complete as directed by the departmental officer ( The PVC water storage tank should be got approved by the engineer before use on work ) ( TWAD=Pa no.173)

Supplying and fixing PVC rain waterdown fall pipe of 110mm dia with necessary shoes, bends and clamps etc.,

Electrical Arrangements

Light and fan point ( SD 25)

Light Point ( for Bath )( SD 26)

Plug Point 5 Amps ( SD38)

Plug Point 15 Amps ( SD 40)

Ceiling Fan

4' LED tube light

TNEB meter board (SD 131)

Service wire

GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column "BB" for all works in this package}

M. Gunasekaran