Construction of PHC Nehama Kulgam (Balance Work).

Amount

Half brick masonry with bricks of class designation 75 under kitchen platforms in cement mortar 1:4 ( 1 cement : 4 coarse sand)

Centring and shuttering including strutting, propping etc. and removal of form for shelves (Cast in situ)

Reinforcement for RCC works incl. straightening, cutting, binding & placing in position i/c cost of binding wire all complete. TMT bars of grade Fe-500.

Reinforced cement concrete work in shelves excluding the cost of centering and shuttering and reinforcement with 1:2:4 ( 1cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size )

15mm cement plaster on the rough side of single or half brick wall of mix 1:6 (1 cement : 6 fine sand)

Providing and fixing 18mm thick granite (Area of slab over 0.5 sqm) with machine cut for kitchen platform of required size of approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edge to give high gloss finish etc complete.

Extra for providing edge moulding to 18 mm thick granite kitchen platform including machine polishing to edge to give high gloss finish etc complete as per design approved by Engineer-in-Charge.

Extra for providing opening of required size and shape for kitchen sink in kitchen platform including rubbing and polishing of cut edges etc complete.

Providing and fixing 8 mm thick ply wood for ceiling including cost of wooden supports for proper levelling (wherever required)

Providing and fixing wooden moulded corner beading of triangular shape to the ply wood ceiling with iron screws, plugs and priming coat on unexposed surface etc. complete. 50x50 mm (base & height) Second class kail wood.

Providing and laying vitrified floor tiles (60x60cm) of approved make laid on 20 mm thick cement mortar 1:4 i/c grouting the joints with white cement and matching pigments etc complete.

Providing and fixing Ist quality ceramic glazed wall tiles 300x450 mm of SOMANY, KAJARIA or equivalent make for walls skirting and dado (upto 2m height) over 12mm thick bed of cement mortar 1:3 i/c pointing the joints with white cement and matching pigment etc complete

Providing and applying white cement based putty of average thickness 2 mm, of approved brand and manufacture, over the plastered wall surface to prepare the surface even and smooth complete.

Applying priming coat:

With ready mixed pink or grey primer of approved brand and manufacture on wood work.

With ready mixed aluminium primer of approved brand and manufacture on ply wood ply wood ceiling:

Wall painting with acrylic emulsion paint (Excel) of approved brand and manufacture two coats, i/c applying additional coats wherever required, to achieve even shade and colour.

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work.

Providing and fixing float glass panes weighing 10 kg/sqm (4mm thick) in doors, windows, clerestory windows and ventilators including cost of matching wooden beading.

Providing and fixing water closet squatting pan ( indian type W.C pan ) with 10 litre low level PVC flushing cistern i/c flush pipe (of approved make) manually controlled device (handle lever) with all fittings and fixtures complete, i/c cutting and making good the walls and floors wherever required. Long pan pattern white vitreous china WC pan of size 580 mm.

Providing and fixing white vitreous china wash basin of size (510 x 400 x 290 mm) with pedestal height 820 mm including waste, painting of fittings, cutting and making good the walls wherever required etc complete. Make-Cera-Counsel-Snow white

Providing and fixing stainless steel angle valve with wall flanges (basin mixer, geyser points, WC cistern, sinks) Make-Cera-Garnet F2002201

Providing and fixing stainless steel bib cocks with wall flanges and aerator. Make-Cera-Garnet F2002151

Providing and fixing storage type water heater (Geyser) with automatic thermostatic control electric element, pressure release valve, M.S. nuts and bolts etc complete, including cost of PVC connection and relevant fittings conforming to IS:2082. Venus or equivalent make.

25 litres capacity

50 litres capacity

Providing and fixing Salem Stainless Steel ISI 304 (18/8) kitchen sink as per I.S. 13983 with C.I. brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and making good the walls wherever required. 610x460mm bowl depth 200mm

Providing and fixing single lever wall mixer (2-in-1) with telephonic shower arrangement. Make-Cera, Jaguar or equalent

Providing and fixing single lever basin mixer with 450 mm braided connection pipe (without pop-up). Make-Cera, Jaguar or equalent

Providing and fixing 600x450mm bevelled edge mirror of superior glass (of approved quality) complete with 6mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with a minimum distance of 37 mm from wall face with concealed fittings arrangements of approved quality and colour, weighing Not less than 88 gms.

Providing and fixing PTMT soap dish holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing Not less than 106 gms.

Providing and fixing stainless steel 4 pins hooks rail for hanging clothes ( 20 x 4 cm ) with fitting arrangements etc complete.

Providing and fixing PTMT grating circular type (100 mm No'sminal dia) of approved quality and colour.

suhail farooq

MOHD ASHRAF WAGAY