CA NO. CWE/CHM-56/2023-24 COMPREHENSIVE REPAIR INCLUDING ROOF TREATMENT TO JCOS/ORS MARRIED ACCOMMODATION IN SECTOR C AND E

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed.

Material and labour for non Skid ceramic coloured tiles 7mm to 8mm thick, (square or rectangular) area of each tile exc 0.18 Sqm but n. exc 0.38 sqm in floors, over & including 15 mm thick cement mortar (1:4) screed etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

Material and labour for glazed ceramic coloured printed tiles in vertical surface of size 350x 250x 7mm/ 450X 350X 7mm thick over 10 mm thick rendering in CM 1:3 for receiving the tiles on verticle surface complete all as specified and directed.

Material and labour for non skid ceremic tiles 7 to 8mm thick square/ rectangular area of each tiles exceeding 0.11 sqm but not exc 0.18 sqm in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over 15 mm thick screed bed in CM 1:4 complete all as specified and directed.

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons laid and pointed in any mortor etc.complete all as specified and directed.

Material and labour for 18 to 20 mm thick, baroda green stone, machine cut laid over & including 15mm thick average thicknesss) cement mortar 1:4 bedded and jointed with grey cement slurry and pointed with grout of matching shade on kitchen plateform, RCC Counters , stairs , window sill and similar situation like incl making hole for gas pipe as directed complete all as specified & directed.

Material and labour for machine cut kota stone slab 18-20 mm thick (One piece for staircase/ landing) for tread at stairs over cement screed base laid and jointed with gray cement slurry mixed with pigment to match the shade of slab including rubbing and polishing upto Granite finish complete over including 15mm thick screed bed in CM 1:3 (1 cement : 3 coarse sand) complete all as specified and directed.

Material and labour for machine cut kota stone slab 18-20mm thick (One piece for staircase/ landing) for riser/skirting at stairs over cement screed base laid and jointed with gray cement slurry mixed with pigment to match the shade of slab including rubbing and polishing upto Granite finish complete over including 10mm thick screed bed in CM 1:3 complete all as specified and directed.

Material & labour for making holes into or through concrete slabs/ stone slabs 150 mm long for 25mm dia pipe as in cooking plateform, incl making good the surface complete all as specified and directed.

Demolition of reinforced cement concrete in roofs, floors, beams, staircases, landing, chajjas and similar suspended work, complete all as specified and directed.

Material and labour for reinforced cement concrete 1:2:4 type B1 (using 12.5 mm graded stone aggregate ) Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

Material and labour TMT bars 10mm dia & over, cut to length, bent to shape reqd including cranking, bending spirally for hooping for columns, hooking ends & binding with MS wire annealed not less than 0.9mm dia welding as required at site complete all as specified and directed.

Material and labour for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed.

Taking down chowkats or frame n. exc. 1.5 sqm each with shutters (without taking off shutters from the frame) complete all as specified and directed.

Taking down chowkats or frame exc. 1.5 sqm and n exc 4 Sqm with shutters (without taking off shutters from the frame) complete all as specified and directed.

Taking down shutter of any description exc 1 Sqm but n.exc 2 Sqm each complete all as specified and directed.

Taking down shutters of any description exceeding 1Sqm but not exceeding 2sqm each including stacking at location as directed by Engineer-in-Charge for refixing in the same opening(s) after rescuring or easing, adusting, welding, etc., complete all as specified and directed.

Supply and fixing factory made pressed steel frames having profile 125mm x 60mm for doors with one or more rebates made out/fabricated of 1.25 mm thick MS sheet, including necessary fixing lugs, hinges, lock strike plate, thress hold bar/flat etc. including for one shop coat of primer complete all as specified and directed.

Supply and fixing factory made pressed steel frames having profile 105mm x 60mm for doors with one or more rebates made out/fabricated of 1.25 mm thick MS sheet, including necessary fixing lugs, hinges, lock strike plate, thress hold bar/flat etc.including for one shop coat of primer complete all as specified & directed.

Supply & fixing 35 mm thick, factory made, second class hard wood, plain framed hammer marked, panelled shutter (two panel)with lock rail and panel of 9 mm BWP commercial ply both face . The size of rail and stile as per IS : 1003 (Part I) kiln seasoned and chemically pressure treated complete all as specified and directed.

Supply and fixing 35mm thick flush shutters, solid core construction, with block board core and plywood face panels commercial type of both sides, water proof shutter complete all as specified & directed.

Supply and fixing 35 mm thick second class hard wood glazed and skelton shutters open rebated and prepared to received gauge/ glass etc(without Sash bars), edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc complete all as specified and directed.

Supply and fixing factory made solid pvc frames having profile 75mmx50mm for doors with one rebates homogeneous fine cellular structure having density of 550 smooth outer intergral skin with suitable metal stiffners and fixed with 100x8 mm sheet metal screws Complete all as specified as per Manufacturer broucher complete all as specified and directed.

Supply and fixing factorymade solid panel PVC moulded door shutter 28mm to 30mm thick (stiles) with 2,4 or 6 raised panel design with 2mm thick moulded prelam PVC sheet on the front face & 2mm pelam PVC sheet on back with particle board core fixing in frame at site as per specifications & drawing complete all as specified and directed.

Supply and fixing solid PVC frame of size 62mmX32mm for Cupboards/Kitchen Cabinets with one rebates homogeneous fine cellular structure having density of 550 smooth outer intergral skin with suitable metal stiffners and fixed complete all as specified and directed.

Material and labour factory made solid PVC plyboard 20-22 mm thick as in cup board shelf/ door, sag free thermal and electrically insulated, light weight wrap free, impact resistant, fire resistant, termite resistant, chemically resistant and smell free complete all as specified and directed.

Material and labour factory made solid PVC board 18 mm thick as in kitchen cabinet,shelves,shutter with 19mm wide pvc leeping pasted at exposed sides sag free thermal and electrically insulated, light weight wrap free, impact resistant, fire resistant, termite resistant, chemically resistant and smell free complete all as specified and directed.

Supply and fixing100 mm size butt hinges medium weight cold rolled mild steel complete all as specified and directed.

Material and labour for Butt hinges 100mm, extruded Aluminium alloy with galvanised mild steel hinge pin , anodised and fix Type C--21 for PVC door complete all as spacified and directed.

Supply and fixing 100mm long Hasp and staple, safety type, aluminium anodized with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed.

Supply and fixing 200 mm size aluminium , barrel tower bolt of extruded section complete all as specified and directed.

Supply and fixing 150 mm size aluminium, barrel tower bolt of extruded section and fixed for PVC door complete all as specified and directed.

Supply and fixing 150 mm aluminium handles cast type anodised complete all as specified and directed.

Supply and fixing 250 mm long aluminium alloy , sliding door bolt plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 06 bolts and nuts, four on bolt plate and two on stable complete all as specified and directed.

Supply and fixing for 300mm MS ordinary rat tail rod pattern spring incl roller plate as in repair complete all as specified and directed.

Supply and fixing for magic eye of size suitable for wooden door complete all as specified and directed.

Supply and fixing 30mm width of flap (when open) size continuous (Piano) hinges, mild steel and fixed in repairs, complete all as specified and directed.

Supply and fixing factory made steel window box type with side hung shutters including box type hinges, 125mm steel handle-02 Nos mild steel ISI marked tower bolt 125mm size (minimum 2 for each shutter) complete with glazing bars, doetailed or welded fixed with and including MS flat of suitable size for fixing grills and guards bars etc and one shop coat of primer including dismantling & removal old complete all as specified and directed.

Supply and fixing factory made steel window box type with side hung shutters including box type hinges, 125mm steel handle-02 Nos mild steel ISI marked tower bolt 125mm size (minimum 2 for each shutter) complete without glazing bars, dovetailed or welded fixed and one shop coat of primer including dismantling & removal old complete all as specified and directed.

Supply and fixing factory made box type steel ventilators including one shop coat of red oxide primer, hinges, tower bolts 100 mm, steel handles and steel peg stay complete without glazing bars devetailed or welded fixed including dismantling & removal old complete all as specified and directed.

Supply and fixing galvanised mild steel wire cloth 0.56 mm nominal dia of wire & avg width of aperture 1.18 mm in fixed with tinned tacks complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden, metel frames including punching or drilling out glazing pins/spring clips complete all as specified and directed.

Supply and fixing 4mm thick sheet glass ordinary quality any size and in any type of frame and glazing with oil putty (or beading) in square n.exc 0.5 Sqm in each panes complete all as specified and directed.

Supply and fixing 4mm thick figured glass pin head type ordinary quality any size and in any type of frame and glazing with oil putty (or beading) in square n.exc 0.5 Sqm in each panes complete all as specified and directed.

Material and labour for framed work such as grill guard bars etc welded to steel frame MS round/square bar conforming to Fe 290 Gde-E 165 as in repair complete all as specified and directed.

Material and labour for preparation of new or previously untreated steel surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint (Ordinary tint) over a coat of red oxide primer complete all as specified and directed.

Material and labour preperation of new steel surface of any description, not otherwise described over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Material and labour for preparation of new or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint (Ordinary tint) over a coat of Pink primer complete all as specified and directed.

Material and labour for one coats of synthetic enamel paint on the old steel surfaces of any description exc 10 cms width/girth including prep of surfaces complete all as specified and directed.

Material and labour for one coats of synthetic enamel paint on the old wooden surfaces of any description exc 10 cms width/girth including prep of surfaces complete all as specified and directed.

Dismantling of brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc. but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

Material and labour for brick work using old size bricks, straight or curved on plan exceeding 6.00 metre mean radius built in cement mortar 1:6, complete all as specified and directed.

All as per item No 52 here-in- before but except bricks above complete all as specified and directed.

Taking down existing plaster of any description on brick wall/ concrete surface including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

Material and labour for dubbing out average 15mm thick on irregular faces of walls, exposed reinforced surfaces, in CM 1:4 complete all as specified and directed.

Material and labour for cement plaster 5mm thick in CM 1:3 on fair faces of concrete/brick surfaces as in ceiling, facia, chajja, etc. finished fair and smooth complete all as specified and directed.

Material and labour for 15mm thick rendering in Cement and Sand mortar 1:6 over brick or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

Material and labour for 15mm thick rendering in Cement and Sand mortar 1:4 over brick or concrete surfaces finished even and fair (external Plaster )without using extra cement complete all as specified and directed.

Material and labour for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper over and including a coat of primer complete all as specified and directed.

Material and labour for three coats of white wash on ceiling surfaces including preparation of new plastered surfaces complete all as specified and directed

Material and labour for preparation of new plastered surfaces of walls and applying two coats of cement base paint, complete all as specified and directed.

Material and labour for two coats of white wash on ceiling surfaces including preparation of old surfaces complete all as specified and directed.

Material & labour for complete removal of existing surface & applying two coats of cement base paint of any tint complete all as specified and directed. Note: Rates are applicable for bldg up to 4 Storey complete all as specified and directed.

Material and labour for including preparation of old plastered or un-plastered surfaces of walls and applying two coats of oil bound distemper on wall surfaces, complete all as specified and directed.

Material and labour for two coats of white wash on wall surfaces including preparation of old surfaces complete all as specified and directed including complete removal of existing treatment.

Demolition of un-reinforced cement concrete exc 15cm thick on any description and in any position not other wise specially provided for and removing all demolished material/debris to 1.50Km form the site and depositing where directed complete all as specified and directed.

Material and labour for Plain cement concrete 1:5:10 (using 40mm graded brick aggregate) type E2 as in sunken filling and mass concrete complete all as specified and directed.

Material and labour for water proofing treatment to SUNKEN PORTION and adjoining walls of kitchen. WC, Bath & Toilet, etc complete all as specified and directed as under:- (a) 15 mm plaster in cement mortar (1:3) after roughning and cleaning the surface mixed with WP compound as per manufacturer’s instructions. (b) Curing the sunken portion with water minimum for 48 Hrs by ponding. (c) Paste one layer of 3mm thick APP membranne with bitumen by torch application to the treated sunken surface over a coat of primer as per manufacturers instructions. (d) Joints/Traps/WC/soil pipes shall be properly sealed with approved sealing compound of make mentioned as specified.

Material and labour for cast iron nahani traps 100mm dia with grating including jointing to waste pipe with run led jointed and setting/fixed in cement concrete type B-1 1:2:4 fixed as in repair complete all as specified and directed.

Supply and fixing wash hand basin, vitreous china, flat back, white of size 550 x 400 mm with and including CP mixer tap, waste coupling, angle brackets, PVC connection 15mm size, 450mm long, PVC waste pipe, fixed as in repair complete all as specified and directed.

Supply and fixing vitreous china squatting pan, “Orissa” pattern size 580mm x 440mm white, with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and flushing pipe complete including trap, set with cement fixed in repair complete all as specified and directed.

S & F Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) including seat cover complete all as specified and directed.

Supply and fixing in repair 10 Ltr capacityPVC valveless, syphonic action type flushing cistern, low level, white with inlet ball valve, valve, float and handle including bracktes complete all as specified and directed.

Supply and fixing 100mm dia bore traps 'P' or 'S' as in repair complete all as specified and directed.

Supply and fixing PVC connection 15mm size with PTMT nuts of length 450mm long as in repairs complete all as specified and directed.

Supply and fixing towel rail 600mm long of PTMT fixed with and including chromium plated brass screws and wooden / plastic cleats (minimum weight 190gms), fixed as in repair complete all as specified and directed.

Supply and fixing towel ring of PTMT fixed with and including chromium plated brass screws and wooden / plastic cleats (minimum weight 90gms), fixed as in repair complete all as specified and directed.

Supply and fixing 5.5mm thick sheet glass shelf assembly 12cm wide with chromium plated guard and railing 60cm long complete all as specified and directed.

Supply and fixing grating doom 100mm dia of PTMT(minimum weight 25 gms) fixed to floor trap with cement mortar 1:3 fixed as in repair complete all as specified and directed.

Supply and fixing plate rack of stainless steel sheet 1.0mm thick of size 600mmx 600mm with steel shelves and hanging arrangements for utensil, fixed as in repair complete all as specified and directed.

Supply and fixing kitchen sink with drainage board made out of stainless steel sheet 1.0mm thick with plug, washers and CP waste coupling, overall size 915mm x 460mm x 203mm, with bowl of size 405mm x 354mm x 203mm incl fixing cantilever brackets fixed as in repairs complete all as specified and directed.

Taking up or down steel tubing and connections 15mm bore complete all as specified and directed.

Taking up or down steel tubing and connections 20mm bore complete all as specified and directed.

Supply & fixing 15 mm bore Galvanized Steel tubes, medium grade including with all fittings for flush pipes, water supply pipes etc., fixed to walls and ceilings or laid in floors complete all as specified and directed.

Refixing old steel tubing of 15 mm bore and connections in new or old position (walls, ceilings, floors etc.) including cleaning obtained against item No.83 here in before complete all as specified and directed.

Supply & fixing 20 mm bore Galvanized Steel tubes, medium grade including all fittings for flush pipes, water supply pipes etc., fixed to walls and ceilings or laid in floors complete all as specified and directed.

Refixing old steel tubing of 20 mm bore and connections in new or old position (walls, ceilings, floors etc.) including cleaning obtained against item No.84 here in before complete all as specified and directed.

Material and labour for cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings etc and cutting chases for concealed water tubing & making good, cutting not exc 10 cm girth, in brick walls complete all as specified and directed.

Supplying and laying in repair of CPVC 16 mm outer dia pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed.

Supplying and laying in repair of 20 mm (outer dia) CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed.

Material and labour as in repair for Brass Elbow 16 mm for CPVC Pipe complete all as specified and directed.

Material and labour as in repair for Brass Elbow 20 mm for CPVC Pipe complete all as specified and directed.

Material and labour as in repair for Brass Elbow (3/4 X ½) for CPVC Pipe complete all as specified and directed.

Material and labour as in repair for Brass Tee 16 mm dia UPVC pipe complete all as specified and directed.

Material and labour as in repair for Brass Tee 20 mm dia UPVC pipe complete all as specified and directed.

Material and labour as in repair for Male Brass Threaded Adaptor 16 mm dia (MTA/ MBTA) for CPVC pipe complete all as specified and directed complete all as specified and directed.

Material and labour as in repair for Male Brass Threaded Adaptor 20 mm dia (MTA/ MBTA) for CPVC pipe complete all as specified and directed.

Material and labour as in repair for Female Brass Threaded 16 mm dia Adaptor (FTA/ FBTA) for CPVC Pipe complete all as specified and directed.

Material and labour as in repair for Female Brass Threaded 20 mm dia Adaptor (FTA/ FBTA) for CPVC Pipe complete all as specified and directed.

Material and labour as in repair for Tank Adapter16 mm dia for CPVC Pipe complete all as specified and directed.

Material and labour as in repair for Tank Adapter20 mm dia for CPVC Pipe complete all as specified and directed.

Material and labour as in repair for Union 16 mm dia for CPVC Pipe complete all as specified and directed.

Material and labour as in repair for Union 20 mm dia for CPVC Pipe complete all as specified and directed.

Supply and fixing bib taps brass, fancy type, with wall flange, chromium plated, cast copper alloy, screwed down for iron pipe or for brass ferrule, suitable for 15mm bore pipe, fixed in repairs complete all as specified and directed.

Supply and fixing bib taps brass, fancy type, long body with wall flange, chromium plated, cast copper alloy with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule, suitable for 15mm bore pipe, fixed as in repairs complete all as specified and directed.

Supply and fixing angular stop cock, fancy type, cast copper alloy chromium plated, screwed down, screwed both and for iron pipe or for union, suitable for 15mm bore pipe, fixed as in repairs complete all as specified and directed.

Supply and fixing stop valve (concealed type), chromium plated, fancy type, screwed down, high pressure with crutch or butterfly handle, screwed both and for iron pipe or for union, suitable for 15mm bore pipe, fixed as in repairs complete all as specified and directed.

Supply and fixing stop valve, cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both and for iron pipe or for union, suitable for 20mm bore pipe, fixed as in repairs complete all as specified and directed.

Supply and fixing Wash hand Basin brass Mixer of chromium plated hot and cold water screwed down for iron pipe or for union, suitable for 15mm bore pipe, fixed as in repair, complete all as specified and directed

Supply and fixing chromium plated, fancy type shower rose with swivel joints 125mm dia with arm and fixing to steel pipe 15mm bore, fixed as in repair complete all as specified and directed

S/F in repair 20-22mm SS curtain rod with fancy brackets/end brackets/fennels and fixing ,stops, rollers etc complete all as specified and directed

Supply and fixing in repair PVC (SWR) rain water pipe, 110mm bore, single socketed in any length with rubber ring joints, fixed to walls with MS clamps made out of flat iron of size 25mm x 3mm including nuts bolts etc, complete all as specified and directed.

S & F 110 mm bore PVC (SWR) bends of any radius complete all as specified and directed.

Supply and fixing in repair 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall including clamps as required complete all as specified.

Supply and fixing 75 mm dia PVC (SWR) bends with oval accesse door with rubber ring joints fixed as required complete all as specified.

M & L for 75mm thick cement concrete type D-2 1:4:8 using 40mm graded stone aggregate , as in sub base of floor complete all as specified and as directed

Material and labour for 40mm thick PCC 1:2:4 type B-1 (using 20mm graded stone aggregate as floor finished even and smooth without using extra cement complete all as specified and as directed.

Dismantling of existing brick tiles or terracing tiles single layer on roof grouted in cement mortar including mud phuska as in roof of any thickness incl plastering and leeping etc (whether full thickness removed or only a part thereof) and removal of any existing treatment , all debries /surplus material and soil etc to a distance of 1.5 KM from sitecomplete all as specified & directed.

Material and labour for PCC 1:2:4 type B1 (20 mm graded stone aggs) as in roof padding finished even and fair to receive APP membrance roof kerbs rounded or chamfered on edges complete all as specified & directed

Material and labour for APP based polymeric membrane 3mm thick, minimum weight 3 kg/Sqm , reinforced with polyester non woven fabric (weight not less than 150 gms/sqm) laid on primed surface by torch application on and including bituminous primer @ 0.40 ltrs per square metre ,complete all as specified and directed.

Material and labour 40mm thick brick tiles over and including 20mm thick Cement mortar 1:4 joints, grouted & pointed flush as the work proceeds mixed with crude oil 5% by wt of cement complete all as specified and directed.

All as per item No 122 here-in-before but except tiles. complete all as specified and directed.

Raking out joints/ pointing in cement mortor to brick work in walls or to bricks on brick tiles, laid flat, in floors, surface channels, roofs, etc to receive PCC on top surface complete all as spacified and directed.

Material & labour for rendering 20mm thick rendering in CM 1:4 plaster on surface, including flashings and junction of parapets, etc., and adjoining vertical surfaces and applying bituminous primer @ 0.40 ltrs per square meter including APP based polymeric membrane minimum weighing 3 kg/Sqm and minimum 3 mm thick reinforced with polyester non woven fabric (weight not less than 150 gms/sqm) laid on primed surface by torch application & applying a coat of Aluminum paint @100gm/sqm on top of membrane complete all over as specified and directed. Note : rates are applicable up to 4 storey building.

Supply only liquid water proofing compound ISI marked complete all specified and directed by Engineer in Charge

Material and labour for providing, cement concrete in roof kerbs of mud stops, rounded or chamfered on edges using type B-1, 1:2:4 (using 20 mm graded stone aggregate) including necessary form work complete all as specified and directed.

Supply and fixing 500 litres capacity rotational moulded polyethylene water storage tanks ISI marked (Cylindrical vertical with closed top) double layered, screwable lid, hoisted and fixed in position, including supply and fix tank nipple, ball valve 20mm PTMT, including dismantling of existing water tanks and removing from site all as specified in SSR Part-I complete all as specified and directed by Engineer-in-charge.

Supply and fixing 1000 litres capacity rotational moulded polyethylene water storage tanks white in colour (Cylindrical vertical with closed top) double layered, screwable lid, hoisted and fixed in position, including supply and fix tank nipple, ball valve 20mm PTMT, including dismantling of existing water tanks and removing from site all as specified in SSR Part-I complete all as specified and directed by Engineer-in-charge.

Demolition of un-reinforced cement concrete in ground floors and pavings not exceeding 15 cm thickness. (Below or above ground level) complete all as specified and directed.

Material and labour for 50mm thick plain cement concrete type C-1 1:3:6 (Using 20mm graded crushed stone aggregates) as in plinth protection finished fair and even without using extra cement complete all as specified and directed.

Material and labour for plain cement concrete 1:4:8 type D-2 using 40mm graded crushed stone aggregate as in foundation, filling and mass concrete complete all as specified & directed.

Supply and fixing float valve/ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed for 20mm bore pipe (minimum weight 210 gms), fixed as in repair complete all as specified and directed.

Supply and fixing 30mm width of flap (when open) size continuous (Piano) hinges, mild steel and fixed in repairs, complete all as specified and directed.

Material and labour for Machine pressed interlocking tiles block in repairs with grey and pigment of approved shape and size conforming to IS 15658-2006 of 60mm thick M-35 grade over 25mm thick sand cushioning as in repair complete all as specified & directed.

M/s Om parkash

M/S Gupta and Sons

AMRIT SINGH

NARINDER KUMAR SONS

KULWANT SINGH

M/s R.N Construction Co.