GE(U)/CHM-38/2020-21-PROVN OF REST ROOM FOR ELECTRICIAN/ DG SET OPR AT SUB STN NO-4A IN CHANDIMANDIR

Amount

Excavation in trenches, not exceeding 1.5 meter wide and not exceeding 1.5 meter in depth for foundation etc or for walls shafts manholes n exc 10 sqm on plan or for laying pipes /cables etc and getting out in loose/soft soil complete all as directed

M & L PCC (1:4:8) type D-2 using40mm graded stone aggregate in foundation/filling and mass concrete.

Material and labour Reinforced cement concrete M-25 grade design Mix as in fdn incl rafts, footing, fdn beams plinth beam of columns, etc and the like similar works. (Using 20mm graded stone aggregate.)

Material and labour Reinforced cement concrete M-25 grade design Mix ( using 20mm graded stone aggregate), as in columns, pillars piers post and struts etc above ground level bracing for column complete all as specified.

Material and labour Reinforced cement concrete M-25 grade design Mix ( using 20mm graded stone aggregate), as in slabs supported on walls , beams and columns , in floors ,roofs landings balconies and in chajjas shelves

Material and labour Reinforced cement concrete M-25 grade design Mix ( using 20mm graded stone aggregate), as in beams lintels , lintel bands, cantilever beams above ground level complete all as specified.

Returning filling including ramming in layer not exe 25 cm thick in each layer watered & well rammed to true surface all as spd

Removing excavated materials to a distance exc 250m but not exc 500m and depositing where directed at a level not exc 1.5m above the strating point in soils all as directed.

M & L for form work to sides of concrete foundations, footings, bases columns , raft and raft beams , sides and soffits of foundation and plinth beams and similar work vertical or better for rough finished surfaces of concrete complete all as specified

M & L for form work to soffits of suspended slabs such as roof slabs , floor slabs , landing etc not exc 200 mm thick (horizantal or slopping ) for rough finished surfaces of concrete complete all as specified

M & L for form work to sides and soffits of floor or roof beams , shelves beam haunching , girders, bressumers , lintel , cantilevers and similar other work including supports for fair finished surfaces on concrete

M & L for form work to sides of pillars , columns ,posts , struts piers , fairs finished surfaces of concrete square rectangular or polygonal above ground level complete all as specified

M & L for form work to edges of concrete flats , treads , breaks in floors , window cills , floors and roofs not exc 20 cm wide and sides of rcc bands in walls, horizantal or slopping and similar works exc 10 cm but not exc 20 cm wide for rough finish

S& F mild steel High strength TMT steel bars as in reinforcement 10mm dia, and over cut to length bent to shape required including cracking, bending spirally for columns., hooking ends binding with mild steel where (annealed) not less than 0.9mm dia

S& F mild steel High strength TMT steel bars as in reinforcement 5mm dia, and over upto and including 10mm dia as in cut to length bent to shape required including cracking, bending spirally for columns., hooking ends

S& F mild steel High strength TMT steel bars as in reinforcement 6mm to 10mm dia, dia as in stirrups spacers and binders cut to length bent to shape required including cracking, bending spirally for columns, hooking ends

M&L brick work using sub class ‘B’ bricks (old size) straight or curved on plan exceeding 6 meter mean radius built in CM 1:4

M&L brick work using sub class ‘B’ bricks (old size) straight or curved on plan to any radius in half brick work built in CM 1:4

M&L for hard core of broken bricks of gauge exe 63 mm deposited spread and leveled in layers not exe 15cm thick watered and rammed to a true surface.

M & L PCC (1:4:8) type D-2 using40mm graded stone aggregate as in Sub base of ground floors.

M& L for 75mm thick PCC 1:3:6 type C-2 (Using 20mm gradede crushed stone aggregate ) as in plinth protection including mastic filling in joints complete . all as specified and directed.

M&L 10mm thick screed bed or bedded ie layer in cm 1:4 for skirting/dados and vertical surfaces etc. complete all as specified.

Rendering 15 mm thick on fair faces of brick work or concrete in cement mortar (1: 6) finishing the surface even and smooth without using extra cement

M&L for Rendering 5 mm thick on fair faces of brick work or concrete in cement mortar (1: 3) as in ceiling finishing the surface even and smooth without using extra cement

M&L for 15mm thick screed bed or bedding layers for floor finishesand laying of floor tiles in CM 1:6

M&L for 12mm thick rendering in cement mortar 1:4 on any face of brick walls/ concrete surfaces and finished even and smooth w/o using any extra cement all as specified.

Supply all fixing steel windows / ventilator with side hung shutters including projection type hinges with steel handle and steel peg stay, complete with glazing bars dovetailed or welded all as specified.

Supply all fixing steel windows / ventilator with side hung shutters including projection type hinges with steel handle and steel peg stay, complete without glazing bars dovetailed or welded all as specified.

S& F 40mmX 40mmX 5mm angle iron as in chowkats or door frames including cutting , welding hold fast, hinges and tie rod fixed in position complete all as spd.

S&F framed work such as grills, gratings etc with ends of bars shouldered and riveted, framed guard bars and similar work confirming to fe 410-0 or fe 310-0

Supply & fixing as in galvanized mild steel wire cloth 1.18mm average width of aperture and 0.56mm nominal dia of wire fixed in repair with tinned tacks or galvanized wire staple

Materials & labour for 25mm thick PCC 1:2:4 type B-1 using 20 mm graded mechanically crushed stone aggregate as in floor and finished even and smooth without using extra cement.

Supply & fixing mild steel work conforming to Fe -310-0 or Fe-410-oin small articles such as hold fast etc.

Supply and fixing 35mm thick plain framed paneled shutters ( any number of panels) with panels of veneeed particle board of plywood face panels including moldings fixed to chow kats of 2nd class Hard wood factory made shutter all as specified

S&F 35mm thick IInd class hard wood glazed and skelton shutters to receive glass /gauge of 2nd class hard wood factory made shutters without sash bars edges of framing plain , chamfered or rounded, fitted with cut and mitredbeads for securing complete all as specified and directed.

S&F Factory made PVC single door frame of size 50 x 47 mm with a wall thickness of 5mm plain colour sheet reinforced with 19 mm x 19mm MS square tube having wall thickness 19 guge complete all as shown in sketch on page 150 of SSR 2004 Part 11.

S&F factory made solid PVC door shutter 30mm thick (Style) consisting of frame made out of MS tube tiles MS tube 15mm x 15mm having wall thickness 19mm gauge for top and bottom rails MS frame shall be covered with 5mm thick heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width in side with solvent cement for stiles and 5mm thick PVC sheet for top rail, lock rail and bottom rail on either side and as gap insert for top rail & bottem rail on either side & as gap insert for top and bottom rail. Paneling of 5mm thick plain colour PVC sheet to be fixed in MS frame welded/sealed to the stiles and rails with 5mm x 30m m PVC sheet in drg give on page 146 of SSR 2004 Part II. The width of stiles and rails shall be as specified in para 8B 2.1 on page 134 of SSR 2004 Part II. Each PVC door shutter leaf consist of 4 Nos 100 mm long MS power coated butt hinges including.

S&F mild steel sliding door bolts 250mm long

Supply & fixing 100mm long MS handles oval type enamelled black stove ISI marked.

Supply & fixing 100mm long butt hinges mild steel medium weight cold rolled ISI marked

Supply & fixing 150mmlong Aluminum anodised barrel tower bolt of extrude section ISI marked.0mm long butt hinges mild steel medium weight cold rolled ISI marked

S& F brass 300mm long ordinary rat tail rod pattern spring included roller and roller plate complete.

Preparation of new plastered surfaces and applying two coats of cement Base paint all as directed and specified.

Preparation of new plastered surfaces and applying two coats of oil bound distemper over a coat of white wash all as directed and specified.

M&L preparation of new or previously untreated surfaces of steel of any description over 10cm width or girth not otherwise described over applying two coats of synthetic enamel paint over a coat of a red oxide zinc primer.

Materials & Labour for preparation of new wooden surface of any description not otherwise described, exc 10 cm width or grith and applying two coat of synthetic enamels paints a coat of all as specified.

Materials & labour for three coat of white lime wash including preparation of the new plastered ceiling surface complete all as specified.

Supply and fixing 3mm thick sheet glass ordinary quality and glazing with oil putty or fixed with wooden beads all as specified.

Applying evenly a coat of blown type bitumen at the rate of 1.5kg/sqm and blinding with clean dry sand @.05cum/sqm on roof Surface.

M&L for coloured non-skid tiles as in floors ofsize 300x300x7mm thick as in floors over cement screed laid & jointed in white cement with pigment complete all specified.

M&L for coloured glazed ceramic tiles of size 300x200 x7mm thick as in vertical surface and joint s grouted & pointed flush in white cement with pigment and including 10 mm thick screed bed of vertical surface on glazed tiles and all as specified.

M&L for GI tubing 15mm bore fixed to walls , ceilings or laid in floors medium grade all as specified.

M&L for GI tubing 20mm bore fixed to walls, ceilings or laid in floors medium grade all as specified.

S & F PVC Connection 15mm size with PTMT nuts of Length 450mm.

Supply & fixing ball brass valve polythene float of 20mm bore all as specified.

Supply and fixing in repairs cast iron floor traps with grating including jointing to waste pipe fixed in cement concrete type B 1:2:4 of 75mm bore all as specified.

S&F syphonic action PVC low level flushing cistern of 10 ltr capacity including internal fittings, waste pipe etc, brackets etc, complete all as specified.

Supply & fixing 500 liter capacity ISI marked rotational molded polyethylene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position including making inlet/outlet connection complete all as directed.

S&F in repair vitreous china wash down water closet pan (Pedestal pattern) Anglow Indian type coloured including sheat cover, belt , fixing bolts and connection to cistern P/S trap CI all as specified and directed.

Supply and fixed wash basin (550X400mm) vitreous china including west pipe & CP west fitting complete, cutting for holes pinking in ends of brackets for erecting stand incl waste pipe and waste coupling complete all as specified.

S& F vitreous china Urinal bowl flat black size 465 X 355 X 225mm White with grating and discharge pipe incl PVC waste pipe complete and fixing plugs bedding urinal against wall in cement mortar 1:2. all as spd .

Supply & fixing fancy type bib taps cast copper alloy screwed down high pressure 15mm bore fixed to pipe all as specified.

S & F fixed in repairs shower rose of PTMT any colour for fixing with 195mm long with bend of 45 degree with flange of PTMT (Minimum wt 80 gms).

Supply & fixed fancy type chromium plated Pillar tpas with capstan head screwed down high pressure with or without lettered 'Hot' or cold with long screwed shanks and fly nuts screwed for iron pipe and fixed.all as specified.

Supply and fixed fancy type chromium plated stop valves cast copper alloy screwed down high pressure fixed to pipe of 15mm bore all as specified.

Supply and fixed fancy type chromium plated stop valves cast copper alloy long shank concealed type screwed down high pressure fixed to pipe of 15mm bore all as specified.

Supply and fixed fancy type chromium plated stop valves cast copper alloy screwed down high pressure fixed to pipe of 20mm bore all as specified.

Supply and fixing cast iron soil, west and vent pipes in any length with or without ears with cement joint laid in floor of 75mm bore all as specified.

Supply and fixing cast iron soil, west and vent pipes in any length with or without ears with cement joint fixed with wall of 50 mm bore all as specified.

Supply and fixing cast iron bends(any radies) diminshing pices or tapers 75mm bore all as specified.

50mm Dia Cowel

Supply & Fixing Towel rail 450 mm long of PMPT fixed as directed by Engineer in Charge .

S&F grating around 100mm size of PTMT (minimum wt 50 gms)

Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2066 Of 100 mm thickness, M-50 Grade.laid dry on sand.

M&L 80 mm thick average consolidated thickness, mud phuska on flat roofs including 25 mm thick mud plaster and 3 mm thick leeping plaster all as specified and directed .

M&L 40mm thick brick tiles laid on mud mortar and jointed grouted flush in CM 1:3 mixed with 5% crude oil by weight of cement on mud phuska complete all as specified and directed.

M&L for concealed point wiring with 1.5 Sqmm (nominal area) FRLS PVC insulated multistranded single core unsheathered, copper conductor passing through and including, PVC cables of 1.5 Sqmm size alongwith one earth continuity conductor with FRLS PVCN insulated unsheathed multistranded copper conductor cable 1.5 Sqmm size through and including PVC conduit terminated in mils steel boxes of suitable for switches and sockets comprising of following :-

(a) One light pinot or one fan point or bell point controlled by one switch

(b) One 3 pin socket outlet, 5 Amp independent

(c) One 3 pin socket outlet, 5 Amp on the same board with other switches

M&L concealed for point wiring with FRLS PVC insulated unsheathed multistranded copper conductor cables of 2.5 Sqmm size alongiwth one earth continuity conductor with FRLS PVC insulated unsheathed multistranded copper conductor cable 2.5 Sqmm size through and including PVC conduit terminated in mild steel boxes of suitable for switch sockets.

S&F switch piano, 5 Amp, single pole, flush type one way 230 volts complete all as specified and as directed.

S&F socket outlet, 2 in 1, 3 pin, 5 Amps, 240 volts complete all as specified and directed

S&F Switch socket combination, 2 in 1, 5 Amps, flush type, 240 volts complete all as specified and directed

S&F Switch socket combination, 5 in 1, 5 Amps, flush type, 240 volts complete all as specified and directed

S&F ceiling rose, 3 way PVC insulated body complete all as specified and directed by Engineer- in- Charge.

S&F stepped type electronic fan regulator flush type

Supply and fix in repair 1x 20 Watt LED tube light fitting TARA-Ei Series alongwith 20 Watt LED bulb rod, MS powder coating white plastic end caps retrofitted with T8 LED tube complete all as specified and directed by Engineer-in-Charge.

M&L lamp holder, PVC / poly carbonate type with black plate suitable for batten fittings

S&F LED lamp 12 Watt complete all as specified and directed by Engineer-in-Charge.

S&F 25 Watt led building security light with all accessories complete including connecting up with 2.5 Sqmm multistranded copper conductor cables not less than 3 metre of length fixed to wall/pole etc and testing complete including taking down old one all as specified and directed.

S&F fans ceiling complete with electronic type regulator and accessories 230V, 1200mm sweep BEE 5 Star rated.

S&F exhaust fan AC single phase 230 / 240 Volts of size 300 mm sweep with DOM all as specified and directed

S&F sheet metal enclosure for MCB DB double door single pole & neutral 4 way with common bus bar at incoming complete al as specified.

S&F MCB 'C' curve double pole 6 to 32 Amps with breaking capacity of 10 Ka

S&F MCB 'C' curve single pole 6 to 32 Amps with breaking capacity of 10 Ka

S&F 1100 Volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in twin core cable slat or circular 10.0 Sqmm solid conductor complete all as specified and directed.

M&L earthing complete with galvanized steel plate electrode 60cmx60cmx6mm surrounded by charcoal & salt buried directly in a pit of depth not less than 1.5m below ground level with top edge of the earth plate at a depth of not less than 1.50m below ground level, connected to 4.00 mm GI wire by means of bolts, nuts, check nuts & washers of galvanized iron or steel, earth wire protected by galvanized steel 15mm pipe 40 mm bore (medium grade) & connected to main control board including necessary excavation & earth work, disposal of surplus soil not exceeding 50m, in any type of soil. (The rate also includes for cost of charcoal & salt in alternate layers of 15 cm thickness, 20 mm bore GI pipe (medium grade) for watering, funnel, wiremesh, PCC chamber in cement concrete (1:3:6) type C-1, 40mm thick RCC(1:2:4) type B-1 cover, complete all as indicated in electric plate No 3 of SSR 2009 Part I including testing complete all as specified and as directed.