DOOR TO DOOR MAINT WORK IN OTM/MD ACCN IN THE AOR OF AGE B/R-III UNDER GE (W) JABALPUR

Amount

Dismantaling floor hearth or wall tiling/china moisac including cement mortar bedding (but not backing ) , removing serviceable tiles to store and rubbish off the premises,including removal Debris material out of Defence land complete all as specified and as directed.

M&L for glazed ceramic coloured tiles of size 450 x 300 x 6 to 7 mm,450x350 or 350x250 6 to 7mm thick on vertical surface such as skirting/dado etc. ,set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tile with & including rendering 10 mm thick in cement mortar 1:4 finished rough to fix tiles complete all as specified and as directed.

M&L Non skid coloured ceramic tiles 7 to 8mm thick square/ rectangular area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm as in floor etc set and jointed in neat cement slurry and pointed in white cement with pigment to match, laid over and including 15mm thick cement screed bed in cement mortar 1:6 complete all as specified and as directed.

M&L for Non skid ceramic coloured tiles 7 to 8 mm thick (Square or rectangular) area of each tile exc 0.18 Sqm but not exceeding 0.36 Sqm, in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over and including screed bed or bedding layer 15 mm thick in cement mortar 1:6 for laying floor finishes complete all as specified and as directed.

M&L for Non Skid ceramic tiles 7 to 8 mm thick ( square / rectangular) area of Each tile exceeding 0.18 Sqm but not exceeding 0.36 Sqm, as in skirting, dados in vertical surfaces etc fixed over and including 10mm thick cement plaster 1:4 complete all as specified and as directed.

M&L for 20- 25 mm thick machine cut kota stone flooring 20 to 20 mm thick laid and jointed with neat cement slurry mixed with pigment to match the shade of the slab laid over and including 20 mm thick bedding layer in cement mortar 1:6 including rubbing and polishing complete all as specified and as directed.

M&L for 18 to 20 mm thick machine cut kota stone as in vertical surfaces risers of steps , skirting, dado and pillars etc set and jointed in neat cement slurry and pointed with grey cement mixed with pigment to match the colour of stone slab laid over and including 10 mm thick rendering in cement mortar 1:4 including rubbing and mirror polishing complete all as specified and as directed.

M&L for Granite (of any type ) 20 mm thick work (table rubbed and polished ) in steps ,jambs,pilllars,window cill,cooking plateforms and like in cement mortar (1:4) including pointing in white cement (1:2)using marble dust with admixture of pigment to match with shade of Granite laid over 20mm thick screed bed in CM 1:6 complete all as specified and as directed.

M&L for rounding to edges of granite stone slabs one edge such as in counter type WHB platform etc complete all as specified and as directed.

M&L for 20-25mm thick Machine cut Cudappha stone slab on cooking platform/shelf over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.

Demolition of cement concrete in ground floor and paving not exc 15cm thickness (below or above ground level) complete all as specified and as directed.

M&L for 25MM thick PCC Type B-0 1:2:4 (Using 12.5mm graded stone aggregate ) to receive rough finish as in floor complete all as specified and as directed.

M&L for 75mm thick PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as in sub base complete all as specified and as directed

M&L for 75mm thick PCC 1:3:6 type C-1 using 20mm graded aggregate as in plinth protection finishing even & fair without using extra cement laid in bays with construction, 6mm thick joints should be filled with bitumen mastic filling comprising of one part of heated bitumen 80/100 gde and three part of sand ( all by weight) complete all as specified and as directed.

Demolition of brick work/stone wall built in cement mortar including all quoins, arches, pillars etc complete all as specified and as directed.

M&L for Brick work with sub class ‘B’ brick, old size straight or curved on plan exc 6m mean radiusbuilt in cement mortar 1:6 complete all as specified and as directed.

M&L for Brick work with sub class ‘B’ brick, old size straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and as directed.

Taking down chowkhats or frames with shutter (without taking off shutter from the frame) of area not exc 1.5 Sqm each complete all as specified and as directed.

Taking down chowkhats or frames with shutter (withoutr taking off shutter from the frame) of area exc 1.5 Sqm but n-exc 4 sqm each complete all as specified and as directed.

Taking down Shutters of any description area n.exc 1 Sqm Each complete all as specified and as directed.

Taking down Shutters of any description area exc 1 Sqm but n exc 2.0 sqm each complete all as specified and as directed.

Refixing of shutters including taking down easening and adjusting and also refixing hardware as required including renewal of unserviceable screws etc. of any description n exc 1.0 sqm each, in same opening complete all as specified and as directed.

S&F for pressed steel door frame 105x60 mm with one or more rebated incl necessary fixing lugs hings, lock strike etc complete all as specified and as directed.

S&F for Pressed steel frames of size 125x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc complete all as specified and as directed.

S&F,for Aluminium anodised sections for doors/windows/ventilators with one or more rebates including joining cleat for fixing etc complete with frames, shutters and grills of size directed by Engineer-in-charge including handles, tower bolts, grills, etc complete all as specified and directed. Note:- Floor door spring, sheet glass, wire cloth, lock, etc shall be measured and paid seperately.

M&L for PCC 1:3:6 type C0 using 12.5mm graded stone aggregate as in filling of pressed steel door frame complete all as specified and as directed.

S&F for 40 mm thick flush shutters solid core construction with block board core and plywood face panels, commercial type on both sides decorative face veneer with lipping/frame to match supplied and fitted to chowkats complete all as specified and as directed.

S&F for 25 mm thick flush shutters solid core construction with block board core and plywood face panels, commercial type on both sides supplied and fitted to chowkats complete all as specified and as directed.

S&F for 35 mm thick factory made plain, framed, panelled shutters (Two panels) with lock rail and panel of 9 mm thick BWP commercial ply or 12 mm thick veneered particle board with commercial veneering on both faces and size of the members of shutter are as per IS – 1003 (Part – I) made of kiln seasoned & chemically pressure treated 2nd class hardwood rail and style complete all as specified and as directed.

S&F for 35 mm thick 2nd class hardwood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc size of members of shutters as specified in SSR Part -I,section 8,clause 8.24 (a) complete all as specified and as directed.fitted to chowkhats for doors etc complete all as specified and as directed.

S&F for 30mm thick 2nd class H/W glazed skelton shutter for window/ventilator, open rebated and prepared to receive glass , gauze etc (with sash bars) edges of framing plain chamfered or rounded , fitted with cut and mitered beads for securing glass etc; size of members of shutters as specified in SSR Part -I,section 8,clause 8.24 (a) complete all as specified and as directed.

S&F for steel windows with side hung shutter including projecting type hinges with steel handle and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and as directed.

S&F for steel windows with side hung shutter including projecting type hinges with steel handle and steel peg stay, complete without glazing bars, dovetailed or welded complete all as specified and as directed.

S&F for steel windows or ventilators, fixed type with glazing bars complete all as specified and as directed.

S&F for PVC door frame size 50mm x 47mm made out of 5mm plain coloured PVC sheet reinf with MS square tube in opening as per specification complete all as specified and as directed.

S&F for factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails . M,S frame shall be covered with heat moulded plain colour PVC ,C, channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rails , lock rails and bottom rails on either side and as gap insert for top rail and bottom rail Panelling of plain colour PVC sheet to be fitted in the M.S frame welded /sealed to the stiles & rails with suitable PVC sheet beading , and jointed together with solvent cement , supplying and fising in the frame at site as per specification and drawing.

S&F, for aluminium anodised, barrel tower bolts of extruded section with length of bolt 200 mm and fixed complete all as specified and as directed

S&F, for aluminium anodised, barrel tower bolts of extruded section with length of bolt 150 mm and fixed complete all as specified and as directed

S&F, for aluminium alloy, anodised, sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy with length of bolt 300 mm and fixed complete all as specified and as directed.

S&F, for 100mm butt hinges extruded aluminium alloy with galvanised mild steel hinge pin,Type-B-21 complete all as specified and as directed.

S&F for 75mm mild steel cold rolled medium weight butt hinges fixed with screws to wooden frames or with welding to steel frames complete all as specified and as directed.

S&F for continuos (piano) hinges,mild steel bright finish or electrogalvanised,width of flaps 30 mm complete all as specified and as directed.

S&F for 150mm long extruded aluminium alloy handles, fabricated type, anodised complete all as specified and as directed.

S&F for 125mm long extruded aluminium alloy handles, fabricated type, anodised complete all as specified and as directed.

S&F for 140mm long floor door stopper of aluminium alloy body and tongue with hard drawn steel spring complete all as specified and as directed.

S&F for door closer hydraulically regulated designation No-2 universal type of aluminium body fixed to door frames with screws or by welding complete for door shutters of 850 to 1000mm in width complete all as specified and as directed.

S&F for 300mm long mild steel ordinary rat tail rod pattern springs,including roller and roller plate complete all as specified and as directed.

S&F for 125mm hasp and staples,aluminium anodized including bolt to hinges plate and fixed with screws complete all as specified and as directed

S&F for stainless steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with stainless steel wire staple/ wooden beads complete all as specified and as directed.

M&L for 9 mm thick prelaminated particle board interior grade,prelaminated both sides with decorative choice laminaions fixed with screw to timber/steel frame work as in repair complete all as specified and as directed.

M&L for 18/19 mm thick prelaminated particle board interior grade,prelaminated both sides with decorative choice laminaions fixed with screw to timber/steel frame work as in repair complete all as specified and as directed.

S&F 3mm thick Sheet glass,ordinary quality and glazing with oil putty/ wooden beads/ rubber in square n exc 0.5 sq. m in each pane complete all as specified and as directed.

S&F 4mm thick figured glass, pinn headed type and glazing with oil putty in square n. exc 0.5 sqm each panes complete all as specified and as directed.

Hacking out old broken glass (any thickness, size, quality or description) from metal frames including punching or drilling out old glazing pins/spring clips and providing and fixing new one complete all as specified and as directed.

S&F 5.5mm thick Sheet glass,ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and as directed.

S&F, in repair, double action floor door closer, hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty, suitable for aluminium doors and fixed complete all as specified and directed.

S&F in repair door closer hydraulically regulated designation No-2 universal type of aluminium body fixed to door frames with screws or by welding complete for door shutters of 850 to 1000mm in width complete all as specified and as directed.

S&F in repair stainless steel wire cloth 0.50 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with stainless steel wire staple/ wooden beads complete all as specified and as directed.

Easing of door shutters for easy closing / opening tightening of hinges or changing the position of hinges adjustment of tower bolts, sliding bolts with new screws etc complete all as specified and as directed.

Easing of window shutters, kitchen cupboard shutters, show case shutter drawers incl fixing of screws adjusting handles, knobs tightening piano hinges incl misc small adjustments complete all as specified and as directed.

S&F, in repair 200mm long aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and as directed.

S&F, in repair 150mm long aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed

S&F in repair 300mm long aluminium alloy, anodised, sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy fixed complete all as specified and as directed.

S&F in repair 100mm butt hinges extruded aluminium alloy with galvanised mild steel hinge pin,Type-B-21 complete all as specified and as directed.

S&F in repair extruded aluminium alloy handles, fabricated type, anodised of size 150 mm complete all as specified and as directed.

S&F in repairs 140mm long floor door stopper of aluminium alloy body and tongue with hard drawn steel spring complete all as specified and as directed.

S&F in repair 75mm long aluminium mortice lock,vertical type 4 lever complete all as specified and as directed.

S&F in repair 100mm long mild steel cold rolled medium weight butt hinges fixed screws to wooden frames or with welding to steel frames complete all as specified and as directed.

S& F in repair 40mm dia cup board knob fixed with nut and washer of mild steel,bright finished complete all as specified and as directed.

S&F in repair 300mm long mild steel ordinary rat tail rod pattern springs,including roller and roller plate complete all as specified and as directed.

S&F mild steel framed work such as guard bars/grills,grating etc with end of bars shouldered and/or riveted or forged into spikes and similar works including one shop coat of zinc chrome primer complete all as specified and as directed.

S&F framed work as in doors or gates of angle or other section with gusset plates ,rails,braces etc complete drilled for fixing of steel gate sheeting or other covering,doors ,etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering ,runing rails and guides ) and hanging also fastning and fixing complete all as specified and directed. confirming to FE-290 ( Gde E-165).

M&L for Cutting holes in brick walls in exc half brick and nexc one brick in cement in mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 complete all as specified and as directed.

Taking down old steel tubing & connection including cleaning for refixing for 15mm bore complete all as specified and as directed.

Taking down old steel tubing & connection including cleaning for refixing for 20mm bore complete all as specified and as directed.

Taking down old steel tubing & connection including cleaning for refixing for 25mm or 32 mm bore pipe complete all as specified and as directed.

S & F 15mm bore GI Tubing medium grade, with all fittings and fixed complete to wall (Conceiled)and ceiling or laid in floors complete all as specified and as directed.

S&F for 15mm bore Low density poly ethylene pipes (LDPE) of pressure rating 6 kg/ cm2 laid in trenches complete all as specified and as directed.

S & F 20mm bore GI Tubing medium grade, with all fittings and fixed complete to wall (Concealed)and ceiling or laid in floors complete all as specified and as directed.

S&F for 20mm bore Low density poly ethylene pipes (LDPE) of pressure rating 6 kg/ cm2 laid in trenches complete all as specified and as directed.

S & F 25mm bore GI Tubing medium grade, with all fittings and fixed complete to wall (Concealed)and ceiling or laid in floors complete all as specified and as directed.

Re-fixing 15mm bore GI Tubing medium grade with all fittings and fixed complete to wall (Conceiled)and ceiling or laid in floors complete all as specified and as directed.

Re-fixing 20mm bore GI Tubing medium grade with all fittings and fixed complete to wall (Conceiled)and ceiling or laid in floors complete all as specified and as directed.

Cutting chases in brick walls, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified and as directed.

S& F in repairs Stop valve / Angle valve fancy type cast copper alloy chromium plated screwed down high pressure with capstan heads screwed both ends for iron pipe or for union and fixed 15mm bore complete all as specified and as directed.

S& F in repairs concealed type cast copper alloy chromium plated screwed down high pressure with capstan heads screwed both ends for iron pipe or for union and fixed 15mm bore complete all as specified and as directed.

S& F in repairs 15 mm bore bib tap (sb/lb) cast copper alloy, chromium plated, long body fancy type with capstan headed, screwed down, screwed for iron pipe complete all as specified and as directed.

S&F in repair for 15mm chromium plated brass WHB mixer fancy type swan neck long nose- screwed down high pressure with or without lettered hot and cold and flynuts 15 mm dia complete all as specified and as directed.

S&F in repair 15mm dia pillar tap cast copper alloy chromium plated capstan head screwed down high pressure with or without lettered hot or cold with long screw shank and fly nutt screw for iron pipe complete all as specified and as directed.

S&F in repair Stainless steel sink with draining board, made out of 1.00mm thick sheet for kitchen or laboratory with plug, washers waste pipe, cast iron cantilever brackets, connecting union overall Size 915mmx460mm with bowl size 410mm x330mm x 160mm complete all as specified and as directed.

S&F Soap dish, stainless steel approx size 160mm x 160mm complete all as specified and as directed.

M&L for 32 mm bore low density polythelene pipes (LDPE) with fittings of pressure rating 6 Kgf / Sqcm fixed to walls or in floors etc complete all as specified and as directed.

S&F in repair PVC connection 450 mm long, 15mm size with PTMT nuts complete all as specified and as directed.

S&F in repair PVC connection 600 mm long, 15mm size with PTMT nuts complete all as specified and as directed.

S&F in repairs 10 ltr PVC valve less symphonic action type flushing cistern, low level white with inlet ball valve float and handle with flush pipe complete all as specified and directed.

S&F in repairs grating doom 125mm dia PTMT with waste hole (Min weight 40 grms) complete all as specified and as directed.

S& F in repairs chromium plated shower rose 125 mm size and 15mm dia with or without swivel joints including fixing to pipe and union complete all as specified and as directed.

S & F in repairs Towel rail 600 mm long and 20 mm dia brass chromium plated D type fixed with screws and wooden or plastic cleats complete all as specified and as directed.

M&L for 100mm dia cast iron floor trap plain with grating including jointing and fixed with cement concrete type B-1 (1:2:4) using 20mm graded stone aggrtegate complete all as specified and as directed.

M&L for 75mm diaPTMT multi floor trap plain with grating including jointing with solvent cement complete all as specified and as directed.

Taking down eaves gutters and rainwater pipes (any size or pattern ),including all fittings,heads,shoes,bends,swan necks etc.including cleaning or refixing or removal to store complete all as specified and as directed.

S&F 110 mm dia PVC (SWR ) pipes Single socketed in any length with rubber rings ljoits fixed to walls complete all as specified and as directed.

S&F PVC (SWR) pipes 75mm bore single socketed in any length with rubber ring joints laid in floors, trenches complete all as specified and as directed.

S&F 110 mm dia PVC (SWR ) branches piece,double (double Y) equal or unequal with access doorrubber rings ljoits fixed to walls complete all as specified and as directed.

S&F PVC (SWR) branch pieces, single (equal or un equal) , ordinary or inverted (spigot or socket type) or with parralled branches of 110 mm dia with access door complete all as specified and as directed.

S&F 110 mm dia PVC (SWR ) bends any radius with access door complete all as specified and as directed.

S&F 75 mm dia PVC (SWR ) bends any radius with access door complete all as specified and as directed.

S&F in repair vitreous China squatting pan of pattern Orissa Pan , size 580 x440 mm white with integral foot rests any pattertn (excl flushing cistern and flush pipe) complete incl provn of lime concrete bedding connection to flush pipe , trap etc & making good complete all as specified and as directed.

S&F in repair vitreous china wash down water closet pan Padestal pattern white excluding fixing bolts, flushing cistern and flush pipe with and incl 'P' or 'S' trap and making good to floor to match with existing complete all as specified and as directed.

S&F, in repair PTMT bottle trap ( with internal partition) 32mm bore having minimum water seal of 25mm(Minimum weight 32mm-260 gms complete all as specified and as directed.

S& F in repairs Vitreous China wash hand basin, white, flat back, size 550mm x 400mm including brass coupling, mild steel brackets fixed to wall, complete all as specified and as directed.

S & F 20mm bore ball valve high pressure PTMT with epoxy coated aluminium rod & high densitypolythene float ball and fly nut screwed for iron pipe complete all as specified and as directed.

S&F in repair Plastic water closet seat, white closed pattern with flat bottom, and cover and mild steel chromium plated or aluminium hinging device complete all as specified and as directed.

S&F in repiar CP waste fittings brass chromium plated for sink 32mm dia with long screws sinks and fly nuts , flange end bedded in red led cement and other in fixed complete all as specified and as directed.

S&F in repiar CP waste fittings brass chromium plated for sink 40mm dia with long screws sinks and fly nuts , flange end bedded in red led cement and other in fixed complete all as specified and as directed.

S&F CP waste fittings brass chromium plated for sink 32mm dia with long screws sinks and fly nuts , flange end bedded in red led cement and other in fixed complete all as specified and as directed.

S&F CP waste fittings brass chromium plated for sink 40mm dia with long screws sinks and fly nuts , flange end bedded in red led cement and other in fixed complete all as specified and as directed.

S&F in repair Flush pipes to pedestal pan, size including all joints complete all as specified and as directed.

S&F in repair Flush pipes to squatt pattern closet including all joints and making good to the floor complete all as specified and as directed.

Supply only integral water proofing compound complete all as specified and as directed.

Taking down cement plaster / terrazzo of any description thickness including raking out joints hacking for key scrubbing down with water complete all as specified and as directed.

M&L for 10mm thick rendering in cement mortar 1:6 on brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed.

M&L for 15mm thick rendering on concrete/brick surfaces in CM 1:4 with water proofing compound as per manufactures instruction finished even and smooth without using extra cement complete all as specified and as directed. Note:- WPC measured and paid separately

M&L 5mm thick rendering in Cement Mortar 1:3 on Concrete Surfaces of ceiling etc finished surface Even and Smooth, without using extra cement complete all as specified and as directed.

M&L for applying two coats of synthetic enamel paint over a coat of red oxide primer on newly steel surfaces of any description over 10 cm width or grith including preparation complete all as specified and as directed.

M&L for applying two coats of synthetic enamel paint over a coat of pink primer on newly wooden surfaces of any description over 10 cm width or grith including preparation complete all as specified and as directed.

M&L for applying three coats of white wash on newly plastered surfacces of ceiling including preparation and complete all as specified and as directed.

M&L for applying two Coats of oil emulsion distemper over 3 mm thick wall care putty overa coat of chalk whitening primer on Newly Plastered Surfaces of internal wall including preparation complete all as specified and as directed.

M&L for applying Two Coats of Cement Base Paint over a coat of alkali resistant primer on Newly Plastered Surfaces of external Walls including preparation complete all as specified and as directed.

M&L for 50 mm thick Sand cushioning under floors complete all as specified and as directed.

M&L for 60mm thick Machine pressed precast concrete interlocking paver block any shape and size with grey cement and pigment, confirming to IS 15658-2006 of M 35 Grade complete all as specified and as directed.

M&L for PCC 1:2:4 type B-1 (using 20 mm graded stone agg) as in seismic and other similar bands, coping, bed block or similar work including necessary form work complete all as specified and as directed. Note:- Reinforced if any used in subject item shall be measured and paid separately.

S&F in repair 18 mm thick PVC sheet one side prelaminated of approved texture ("celuca ply of Rajshree make or equivalent in "Sintex" as approved by GE) as in Kitchen cabinet. (withshelves and partitions) including necessary fitting & fixture as per manucture's instructions complete all as specified and as directed.

S&F Handles of senso (as per 3D designs) 150mm including all connection fitting complete all as specified and as directed.

Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets including E- Grid frame work complete all as specified and as directed.

S & F suspended prepainted false ceiling, self design, self texture, using chicago metalic (E grid) exposed suspended system, grid section size 600mmX600mm comprising of GI powder coated main runner of dimensions 39mm X 24mm X 08mm thick (thickness comprising of GI /0.4+PPPCGS/0.3mm & weight of runner 1.35kg for 3600mm length) cross tee of dimensions 29mm X 24mm X0.8mm thick and thick wall angle 22.2mm X 22.2mm X 0.65mm thick (thickness comprising of GI/0.35+PPPCGS/0.3mm & weight of angle 0.70kg for 3050mm length) with and including 4mm thick HPSC (high pressure steam cured) pre-primed, self embossed, texture designer board, water resistant termitant, fire resistant for insulation and acoustic purpose to be placed in the grid system duly suspended with 4mm dia GI bar hangers fixed with steel dash through fasteners from purlins of the roof with butterfly clips (wt -0.007kg/clip hold down clips (wt- 0.0035kg/clip) with provn of light fixture complete all as specified and as directed.

S&F in repair mild steel pipe 19 to 20 mm dia Drapery rod fancy type with PVC coating fixed in the MS hooks, and finials/side brackets (both side) complete all as specified and as directed.

S&F in repairs fancy type wall mixture of brass, chromium plated, 3 in 1 system with hot and cold arrangement, with provision for both hand shower & overhead shower complete all as specified and as directed.

S&F in repair C P glass corner shelf set of three single including Screws and CP bracket complete all as specified and as directed.

S&F for PVC waste pipe 32mm bore of size and 900mm long complete all as specified and as directed.

S&F for PVC waste pipe 40mm bore of size and 900mm long complete all as specified and as directed.

S&F, in repair, health faucet with wall hook and 1.0m chrome plated PVC hose pipe complete all as specified and as directed.

S&F, in repair, jet spray with 1m PVC tube (stainless steel), chromium plated for vitreous china padestal pattern water closet complete all as specified and as directed.

S&F, in repair, chromium plated, Toilet paper holder complete all as specified and as directed.

S & F in repairs Towel ring brass chromium plated round type fixed with screws and wooden or plastic cleats complete all as specified and as directed.

S&F in repair ,Single piece WC with UF soft close slim seat cover,Hinges, Fixing Accessories,Accessories set and Cistern fittings, Size 365x655x765mm, 'P' Trap -180mm complete all as specified and as directed.

S&F in repairs ,shower panel size 1400x200mm ,anty finger print stainless steel body including all fittings complete all as specified and as directed.

S&F in repairs kitchen plate rack made of stainless steel 1mm thick complete size 1200 x 900mm x 200mm width of trade pattern complete all as specified and as directed.

chandan construction (BID ID -3123729)

JUPITER TRADERS (BID ID -3109715)

Shri kamal traders (BID ID -3112225)

SHRI KRISHNA CONSTRUCTIONS (BID ID -3103685)