Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹12.4 LAccepted-AOC | ₹12.4 L | L1 | Accepted-AOC OK |
| 2 | L2₹12.4 LRejected-Finance | ₹12.4 L | L2 | Rejected-Finance REJECTED |
| Sl No | Description | Qty | Unit | BALAGURU INFRA L2 | A . SELVARAJ L1 |
|---|---|---|---|---|---|
| 1.00Servicing, removing, dismantling, assembling, re-erection, pipe, specials of following items of work as follows( The cost of the existing damaged coil other than burned coil should be deducted ) | |||||
| 1.012 HP Submersible Motor | |||||
| 1.02 | Motor Rewinding Charge | 10 | Each | 2,800 ₹28,000 | 2,800 ₹28,000 |
| 1.03 | Replacement of cover sleeve | 10 | Each | 1,000 ₹10,000 | 1,000 ₹10,000 |
| 1.04 | Shaft welding on two sides | 10 | Each | 1,100 ₹11,000 | 1,100 ₹11,000 |
| 1.05 | Replacement of Thrust Bearing’s | 10 | Each | 1,450 ₹14,500 | 1,450 ₹14,500 |
| 1.06 | Lathe work and fixing charge | 10 | Each | 980 ₹9,800 | 980 ₹9,800 |
| 1.07 | Replacement of brass bush & clutch pad | 10 | Each | 1,600 ₹16,000 | 1,600 ₹16,000 |
| 1.08 | Replacement of “O” ring & oil seal | 10 | Each | 300 ₹3,000 | 300 ₹3,000 |
| 1.09 | Replacement of circlip lock | 10 | Each | 350 ₹3,500 | 350 ₹3,500 |
Tender Value
₹14.8 L
EMD Value
₹14,800
Closing Date
24 Nov 2025, 3:00 pmClosed
THE COMMISSIONER, ERODE CITY MUNICIPAL CORPORATION
246, MEENAKSHI SUNDARANAE SALAI, ERODE - 638001
MAINTENANCE AND REPAIRS TO THE BOREWELL HAND PUMPS, BOREWELL PUMP SETS AND AIR COMPRESSORS AT WARD NO. 10, 19, 30, 31, 32, 33, 34, 44, 45, 46, 47, 48, 49, 50 AND 51 IN ZONE-III IN ERODE CITY MUNICIPAL CORPORATION
2025_MAWS_625856_1
E1-4018-2025-2- ERODE CITY MUNICIPAL CORPORATION
Open Tender
Civil Works
90 days
ERODE CITY MUNICIPAL CORPORATION
Please refer Tender documents.
2 documents required · 2 mandatory
₹7,080
₹14,800
14 Mar 2026
24 Nov 2025
24 Nov 2025
24 Nov 2025
24 Nov 2025
24 Nov 2025
Amount
Servicing, removing, dismantling, assembling, re-erection, pipe, specials of following items of work as follows( The cost of the existing damaged coil other than burned coil should be deducted )
2 HP Submersible Motor
Motor Rewinding Charge
Replacement of cover sleeve
Shaft welding on two sides
Replacement of Thrust Bearing’s
Lathe work and fixing charge
Replacement of brass bush & clutch pad
Replacement of “O” ring & oil seal
Replacement of circlip lock
2 HP Submersible Pump Over Handling :
Replacement of PVC impellor
Replacement of brass bushes
Replacement of S.S. bushes
Lathe works & fixing charge
Replacement of rubber bush
5 HP submersible Motor :
Motor Rewinding charge
Replacement of cover sleeve
Shaft welding on two sides
Replacement of Thrust Bearing’s
Lathe work and fixing charge
Replacement of brass bush & clutch pad
Replacement of “O” ring & oil seal
Replacement of circlip lock
5 HP Submersible Pump Over Handling :
Replacement of brass impellor
Replacement of brass bushes
Replacement of S.S. bushes
Lathe works & fixing charge
Replacement of rubber bush
7.5 HP Submersible Motor :
Motor Rewinding charge
Replacement of cover sleeve
Shaft welding on 2 sides
Replacement of thrust bearings
Lathe work and fixing charge
Replacement of brass bush & clutch pad
Replacement of “O” ring & oil seal
Replacement of cir clip lock
7.5 HP Submersible Pump Side :
Replacement of brass impellor
Replacement of brass bushes
Replacement of S.S. bushes
Lathe works & fixing charge
Replacement of rubber bush
5 HP Mono block motor :
Motor Welding charge
Shaft Welding on 2 side and lathe work
Replacement of Drive END and Non Drive END sleeves
Replacement of bearings
Mechanical & Lathe works etc.
Removing of Motor, re fixing & transport charges
5 HP Air Compressor Over Hauling :
Replacement of piston
Replacement of Rings
Replacement of connecting rod
Replacement of bearing
Head Cylinder, head spacing charge (over size bork)
Replacement washer gasket including packing paste & charge
Service & fitting charges
Center Cooler
Head New Piece
Air filter
Bolt and Nut
Removing of Compression, Re fixing & transport charge
(i) 2.00 HP Control Panel Starters :
Replacement of No volt coil
Replacement of Over load replay
Replacement of contractor
Replacement of starter contacts
(ii) 5 HP / 7.5 HP Control Panel Starters :
Replacement of No volt coil
Replacement of Over load replay
Replacement of contractor
Timer
Volt meter
Ammeter
Single phasing preventers
Replacement of starter contacts per
Service & fitting charges
Filling of 20 / 40 Oil :
Filling 20 / 40 oil to in the compressor per liter
Removal and rerection of submersible pump set in the existing borewell.
Up to 5.00HP submersible pumpset
Above 5.00HP - 10.00HP submersible pumpset
Above 10.00HP - 20.00HP submersible pumpset
Conveyance of power pump set and its accessories from the site uto 10km
Re-erect. of submersible pumpsets and its accessories from borewell for attending repairs. (above 5 HP)
submersible cables and service cable.
Replacement of 2.5 sq.mm 3core flat cu.cable - 1RM
Replacement of 4.0 sq.mm 3core flat cu.cable - 1RM
Supply and run of 2 of 4 sqmm cu Conductor for Service Connection main
Supply and run of 4 of 6 sqmm cu Conductor for Service Connection main
Main switch and fuse units.
16Amps fuse unit -1No
32Amps fuse unit -1No
63Amps fuse unit -1No
63Amps MCB -1No
(i) GI Pipe
32mm dia GI Pipe "B" Class
40mm dia GI Pipe "B" Class
50mm dia GI Pipe "B" Class
(ii) GI Specials
32mm dia GI Union
32mm dia GI Elbow
32mm dia GI Tee
32mm dia GI Coupling
40mm dia GI Union
40mm dia GI Elbow
40mm dia GI Coupling
50mm dia GI Union
50mm dia GI Elbow
50mm dia GI Tee
50mm dia GI Coupling
(iii) UPVC pipe.
Replacement of 32mm UPVC pipe
Replacement of 40mm UPVC pipe
Replacement of 50mm UPVC pipe
Labour charges for removing HDPE hose submersible motor “ From the damaged borwell :
Labour charges for removing HDPE hoses from the damaged. Stuck borewell
Labour charges for removing submersible motor from the damaged stuck borewell
Attending repairs to deep borewell Hand pumps for bore well including removal of GI pipe plunger rods cylinders and re-erection hand pumps including loering the GI pipe plunger rods, Cylinders etc., complete
a) Up to 30.00m
b) Above 30.00m
BALAGURU INFRA (BID ID -1519692)
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.06 MB
BOQ_748404.xls
BOQ • 0.28 MB
CONDITIONS_2.pdf
Tender Documents • 0.72 MB
Download all tender documents and submit your bid