Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹25.8 LAccepted-AOC | L1 | Accepted-AOC ACCEPTED DUE TO LOWEST | |
| 2 | L2₹27.2 L+₹1.3 L (4.89%)Rejected-AOC | L2 | Rejected-AOC REJECTED DUE TO NOT LOWEST | |
| 3 | L3₹28.0 L+₹2.0 L (7.87%)Rejected-AOC AT POST ARANGAON MEHERABAD TAL DIST AHMEDNAGAR PIN 414006 | AHMEDNAGAR | AHMEDNAGAR | MAHARASHTRA | 414006 | L3 | Rejected-AOC REJECTED DUE TO NOT LOWEST | |
| 4 | L4₹32.1 L+₹6.1 L (23.7%)Rejected-AOC | L4 | Rejected-AOC REJECTED DUE TO NOT LOWEST |
Tender Value
₹29.5 L
EMD Value
₹59,500
Closing Date
11 Aug 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) LOHEGAON
GE (AF) LOHEGAON, PUNE -411032
ADDITION AND ALTERATION IN P-02 BUILDING FOR HYD LAB AND PROVISIONING OF CERTAIN EM AND BR WORKS AT 28 MMPU UNDER GE (AF) LOHEGAON AT AIR FORCE STATION PUNE
2022_MES_538749_1
8598/E8
Open Tender
Civil Works
Item Rate
180 days
GE (AF) LOHEGAON
As per NIT
8 documents required · 8 mandatory
₹500
Yes
GE (AF) LOHEGAON
₹59,500
Yes
31 Oct 2022
16 Jul 2022
18 Aug 2022
16 Jul 2022
11 Aug 2022
30 Jul 2022
Amount
Demolition of cement concrete in ground floor and pavings n'exc 15cm thickness (below or above ground level) complete all as specified and as directed.
Excavating in trenches, n exc 1.5 m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and n exc 1.5 m in depth and getting out in any type of soil complete all as specified and as directed.
Taking down cement plaster on brick or concrete surfaces including racking out joints hacking for key, scrubbing down with water etc. complete all as specified and as directed
Taking down chowkats / frames with shutters (without taking off shutters from the frames) area n'exc 1.5 Sqm each complete all as specified and as directed.
Taking down chowkats or frames with shutters (without taking off shutters from the frames) area exceeding 1.5 Sqm and not exceeding 4 Sqm each complete all as specified and as directed.
M&L for PCC type D2(1:4:8) using 40mm graded crushed aggregate as mass concrete and filling of foundation complete all as specified and as directed.
M&L pre-cast cement concrete(20mm graded crushed stone aggregate) 1:3:6 type C-1 as in block masonary with solid blocks,exc.10cm in width and setting in cement mortar 1:6 complete all as specified and as directed.
M&L for PCC type B1 (1:2:4) using 20 mm graded crushed aggregate in coping, mass concrete complete all as specified and as directed.
M&L RCC type B0 1:2:4 (12.5 mm grade aggregate ) in Slabs supported on walls ,beams and columns, in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed.
Form work to soffits of suspended slabs such as roof, floor slabs,landings etc n.exc 200mm thick (horizontal or sloping) complete all as specified and as directed.
Form work to edges of concrete flats nexc 20 cm wide complete all as specified and as directed.
M&L for mild steel TMT bars 10mm dia and over cut to length bent to shape as reqd , incl crancking bending ,spirally for hooping columns hooking ends and binding with and including mild steel wire not less than 0.9 mm dia complete all as specified and as directed.
M&L for mild steel TMT bars 6mm dia to 8 mm dia and over upto incl 10mm cut to length bent to shape as reqd ,as in stirrups and spacers complete all as specified and as directed.
S&F 2nd class soft wood plain, solid, straight chowkets and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and as directed.
M&L for 9mm thick prelaminated particle board medium exterior grade, prelaminated both side with decorated choice lamination fixed with aluminium beads on aluminium frame work as in wall panelling, shelves , partition, boarding complete all as specified and as directed.
M&L for 2nd class soft wood clean sawn as in beading for glass work in partitions fixed with nails exc 6 sqcm and n exc 13 sqcm in section complete all as specified and as directed.
S&F mild steel work as in hold fasts and similar work confirming to Fe-290 or Gd -E 165 complete all as specified and as directed.
M&L for treating wooden chowkats surface of any description n exc 10 cm in width or girth with black bituminous paint in two coats complete all as specified and as directed.
M&L for preparing and treating small articles of builders hardware such as MS hold fasts, MS but hinges etc, with two coats of synthetic enamal paint over a coat of primer when un connected with other paintings or when painted in a different tint complete all as specified and as directed.
Material & labour PCC (1:3:6) type C1 (using 20 mm graded stone aggregate) as in hold fast , bed block and like complete all as specified and as directed.
S&F 35 mm soft wood Glazed and skelton shutter, open and prapared to receive the glass, gauze etc.(without sash bars) edges of framing plain chamfered or rounded, fitted with cut and mitred beads for securing glass etc. (Glass / Wiremesh should be measured seperately) complete all as specified and as directed.
S&F for 40 mm thick Flush shutters, solid core construction ,with block board core and plywood face panels commercial type on both sides , Supply and fixed to chowkats complete all as specified and as directed.
S&F Steel windows (frame with shutter) with side hung shutters including projecting type hinges with steel handle ,and steel peg stay,complete with glazing bars,dovatiled or welded (Glass shall be measured Seperately) complete all as specified and as directed.
M&L sheet glass 3mm thick ordinary quality and glazing with oil putty or wooden beads in square not exc 0.50 sqm in each pane complete all as specified and as directed.
S&F mild steel butt hinges, medium weight cold rolled 100mm size complete all as specified and as directed.
S&F 150mm long aluminium anodized, barrel tower bolt of extruded section complete all as specified and as directed.
S&F 150mm size extruded aluminium alloy handles, fabricated type, anodized complete all as specified and as directed.
S&F 300mm long mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed.
S&F 250mm long aluminium alloy, anodized, sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolt and sliding bolts of extruded section or cast aluminium alloy fixed complete all as specified and as directed
M&L Door closer Aluminium (extruded section) hydraulically regulated, designation No.3 universal type,suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 Kg and fixed complete all as specified and as directed.
S&F 04 levers 100mm Brass Mortice lock vertical type complete all as specified and as directed.
S&F 02 levers 65mm Brass Mortice lock vertical type complete all as specified and as directed.
S&F 40mm Continuous (piano) hinges, brass, bright finish or electro galvanised in doors of Builtup cupboards complete all as specified and as directed.
S&F 75 mm extruded brass handles, cast type, polished bright fixed with brass screws in doors of Builtup cupboards complete all as specified and as directed.
M&L for preparation of new wood or wood based surface of any description over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.
S&F Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanised wire staples complete all as specified and as directed.
M&L 15mm thick rendering in cement mortar (1:6) on other than fair faces of brick/ concrete surfaces of walls , finished even & fair without using extra cement complete all as specified and as directed.
M&L 5mm thick rendering in cement mortar (1:3) on fair faces of concrete ceiling surfaces, finished even & smooth without using extra cement complete all as specified and as directed.
M&L Hardcore with boken stone of gauge n exc 63 mm, deposited, spread and levelled and layer n exc 15 cm thick, water and rolled /rammed to a true surface complete all as specified and as directed.
M & L for 75 mm PCC 1:3:6 type C-2 using 40mm graded aggregate as in flooring , sub bases etc complete all as specified and as directed.
Roughenng surface of old concrete floor/wall by picking, sweeping, cleaning and washing down with water to remove dust, etc to falicitate flooring with any type of finish complete all as specified and directed.
M&L for vitrified ceramic tiles 09 to 10mm thick (light shade ) (square/ rectangular) polished, area of each tiles not exc 0.36 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles and screed bed with CM (1:6) 15mm thick for laying floor tiles complete all as specified and as directed.
M&L for Non skid coloured ceramic tiles 7 to 8mm thick (Square/ rectangular) area of each tile exc 0.11Sqm and nexc 0.18 Sqm in floor etc set and jointed in neat cement slurry and pointed with white or coloured cement mixed with pigments to match the screed bed with CM (1:6) 15mm thick laying floor tiles complete all as specified and directed.
M&L for Glazed ceramic coloured tiles in vertical surfaces 350 x 250 x 7mm /450 x 350 x 7mm thick set and jointed in neat cement slurry and pointed with white or coloured cement mixed with pigments to match over 10mm thick CM (1:4) in dado/skirting tiles complete all as specified and directed.
M&L for Granite of any type 20 mm thick over 20mm thick cement screed base (1:6) laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete all as specified and as directed.
S&F GI tubing of 15 mm dia medium grade with all fittings & fixed complete to walls and ceiling or laid in floors complete all as specified and as directed.
S&F 15mm Stope / Gate valve ,cast copper alloy,screwed down, high pressure,with crunch or butterfly handle ,screwed both ends for iron pipe or for union and fixed complete all as specified and as directed.
S & F Vitreous China wash basin, white, flat back, size 450 x 300mm including cutting for and pinning in ends of brackets or erecting stand but inclusive of fixing of supply and waste pipe complete all as specified and as directed.
S & F 15 mm bore pillar taps, fancy type Cast Copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe(Cat pat No- F100001 of Hindware) complete all as specified and as directed.
S&F in repairs Angle stope valves, cast copper alloy, screwed down high pressure with crutch or butter fly handle, fancy type, chromium plated with long shank and cup (concealed type), 15mm bore dia of pipe complete all as specified and as directed.
S&F waste pipe of polyethylene of low or high density or PVC ,32 mmdia for urinal/wash basin/ flush tankfixed in repairs complete all as specified and as directed.
S&F PVC connection pipe suitable for connecting flushing cistern and WHB etc 450mm long complete all as specified and directed.
S & F waste coupling of PTMT 32mm bore for urinal / wash basin (Half or full threaded ) (Minimum Weight 45 grams) complete all as specified and as directed.
S & F CP floor gratings 100mm dia with or without waste hole of PTMT (mim waight 40 grms) complete all as specified and as directed.
S&F bib tap cast copper alloy chromium plated butterfly handle screwed down screwed for iron pipe completed (15mm dia tap) complete all as specified and as directed.
S & F 110 mm dia, PVC rain water pipes, single socketed, in any length with sealant rubber ring joints including necessary MS flat Iron clamps of size (40 x 4mm) complete all as specified and as directed.
S & F 75 mm dia, PVC rain water pipes, single socketed, in any length with sealant rubber ring joints including necessary MS flat Iron clamps of size (40 x 4mm) complete all as specified and as directed.
PCC 1:3:6 Type C-2 (40mm gradded aggergate) bed to drain pipe incl packing under and haunching against side after they are laid and tested up to 110mm dia pipe complete all as specified and as directed.
S&F in repairs steel rolling shutters 1.00 mm thick, without ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position after removing old existing one complete all as specified and as directed.
M&L for preperation of old plastered wall surface of any description and applayng two coat of Oil bound distemper complete all as specified and as directed.
M&L for preparation of new concrete /plastered surface of any description, applying 3mm thick wall care putty and two coat of distemper oil emulsion over a coat of primer complete all as specified and as directed.
M&L for preparation of new steel surface of any descripton and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.
M&L for preparation of existing steel surface of any descripton and applying one coat of synthetic enamel paint complete all as specified and as directed.
M&L for preparation of new plastered ceiling surface of any description and applying Two coat of Oil bound distemper over a coat of primer complete all as specified and as directed.
M&L for preparation of old treated plastered ceiling surface of any description and applying Two coat of Oil bound distemper complete all as specified and as directed.
M & L for Anodised aluminium frame or sliding channels of standard section for doors, windows, ventilators and partitions with double rebates including joining cleat for fixing etc. complete all as specified and as directed.
M&L for Powder coated aluminium doors, sliding doors etc. with frame of Aluminium sections weighing not less than 0.55 kg/m including necessary joining cleats, Rollers, glazing clips,handles,floor door stoper,tower bolts, rubber neoprene packing, anodised aluminium snap beading, screws,hinge type B-21 100mm long (3 no.) suitable handle (2 no.) (Glass / Wiremesh should be measured seperately) complete all as specified and as directed.
M&L for Powder coated aluminium window and ventilators of any type with sliding track of aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rollers (if required) ,rubber packing, anodised aluminium snap beading, screws, anodised aluminium fitings such as peg stays 150mm long (1 no.) hinge type B-21 100mm long (2 no.) suitable handle (1 no.) (Glass / Wiremesh should be measured seperately) complete all as specified and as directed.
Excavating in post holes (or similar holes) each n exc 0.5 cu.m, getting out, returning filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50m and making good surface of hard / dense soil complete all as specified and as directed.
M & L Cement concrete 1:3:6 type C2 (using 40 mm graded stone aggregate) in foundations, filling and mass concrete complete all as specified and as directed.
S & F Rolled mild steel in Compound girders and stanchions, lattic girders,posts, staging for water tanks and the like including caps, bases,splices etx. Builtup from two or more beem or channel sections or angles with plates, including all lattice bars, stifeners,gusset plates,etc. conforming to FE-410 - W(grade E-250) quality 'A' complete all as specified and as directed.
S & F rolled sections as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors, fixed with angle cleats or other connecting plates conforming to FE-410 - W(grade E-250) quality 'A' complete all as specified and as directed.
Mild steel screw bolts of length of bolt exc 5cm but n exc 10cm long, diameter of neck 11 to 15mm (machine made) with hexagonal or square heads,at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut complete all as specified and as directed.
S&F 0.63mm thick Galvanised corrugated mild steel sheeting with two corrugations side lap,fixed with coach screws and washers in roofs walls etc. with grade of zine coating 275 complete all as specified and as directed.
S&F 0.80mm thick plain galvanised mild steel sheeting as in ridges hips, valley gutters drip and straight flashings (length and girth as fixed) with L or J hooks or coach screws with grade of zinc coating 275 complete all as specified and as directed.
S&F Fibre glass reinforced translucent corrugated sheeting 2mm thick with two corrugations side lap fixed with coach screw and washer in roof, wall etc complete all as specified and as directed
M&L Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors,balusters,nosing to steps including embeding in concrete and screwing etc. wind ties for roof ,Brackets for Valley gutters ,including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc. flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 410-0 or FE 310-0 complete all as specified and as directed.
S&F MS framed work such as grills, gratings etc with ends of bars shouldered and/or rivited or forged in spikes, framed guard bars, barred iron doors, ledders framed balsters walk ways railings frame work of water tanks and similar work conforming to Fe-290, Gde-E-165 complete all as specified and as directed.
S&F Mild steel , plain, black sheet 1.6mm thick in wall cladding up to 10 Mtr height, steel gates and smilar work, cut to size, holes punched ; including round headed screws ,clout nails or reveted and fixed to wood or steel framing with plain 40mm lap joints with reveted or welded, seams including bending or turning up, mitred angles etc as requred complete all as specified and as directed.
M&L applying two coats of Camouflage pattern synthetic enamel painting to new surfaces steel/ CGI sheet surface exc. 10 cm width/girth over a coat of mordant solution including preparation of surfaces by removal of galvanisation if reqd, washing and cleaning,including filling with filler where reqd complete all as specified and as directed.
M & L 75mm thick PCC (1:2:4) type B-2 using 40mm graded agg as in sub floors, sub-bases, floors nad pavings etc. complete all as specified and as directed.
M & L 20mm thick Wear proof topping as specified (incorporating an approved metallic floor hardener as per manufacturers directions), laid on concrete floors and pavings, finished even and fair (metallic hardener will be calculated and paid seperately) including spike rolling to surface or making impressions of expanded metal ,whilst the concrete is green complete all as specified and as directed.
Supply only for Metallic floor hardener complete all as specified and as directed.
M&L for glass dividing strips 3 mm thick and 95 mm wide inserted in position ,conform to design complete all as specified and as directed.
Supply, install, testing commissioning of 4 star rated inverter AC having 2.0 TR capacity,precision cooling technology, dual rotor inverter compressor , BLDC motor, filters,cold plasma technology,100 % copper coils of indoor, outdoor including installation kit for indoor & outdoor unit,extra length of refrigerant copper piping,cord cable,drain pipe as reqd at site. Refrigerant shall be echo friendly (R-410a, R-32) complete all as specified and as directed.
M&L for Sheet metal enclosure with single pole and neutral with two pin and earth plug and socket complete with one single pole MCB 20 Amps, 240 volts complete all as specified and as directed.
Supply and fixing of voltage stabilizer for automatic operation, single phase, copper wounded, naturally air cooled indoor type & design for input variation between 170 V to 250 V with output voltage stabilized at 230 V with accuracy of +/- 2.5% and capacity 5.0 KVA complete on wall complete all as specified and as directed.
M & L for sub main wiring with two runs of single core 4.0 Sq mm FRLSH PVC insulated unsheathed multi stranded copper conductor 1100 V grade with colour code and one run of 4.0 Sq mm single core FRLSH PVC insulated unsheathed multi stranded copper conductor green colour cable as earth continuity conductor drawn in & including casing & caping complete all as specified and as directed.
Taking down the existing surface batten type point wiring of aluminium for Light, fan, Sockets, power sockets, stair case light point complete with switch socket regulator , bracket fitting etc and making good disturbed surfaces for wall, floors etc complete all as specified and as directed.
M& L for flame proof point wiring with 2.5 sqmm single core multistranded copper conductor FRLS PVC insulated and unsheathed cable 1100V grade conforming to IS 694 drawn through steel ERW conduit of 25 mm (external) flame proof, heavy grade ISI marked including nessary conduit accessories surface on wall, ceiling etc. including flexible metallic conduit FP grade and suitable size nipples for connect the FP junction box to light fitting & fan etc incliding 2.5 sq mm PVC insulated FRLS copper conductor as in continous earth wire for one FLP light/ fan point controlled by one way metal clad switch of 15 amps capacity complete all as specified and as directed.
S&F in replacement FLP - WP Rotary Switch with cable termination box in LM6 16 Amps single pole 240 V ON / OFF complete all as specified and as directed.
S&F FLP - WP switch socket and plug combined with cable termination box in LM6 16 Amps 2 Pole + earth 240 V ON / OFF complete all as specified and as directed.
Taking down carefully existing flame proof light fitting 1x20/36 watt without damaging from the existing location and refixing them to new location with all standard accessories ,connecting wire and metallic flexible wire guard including necessary fixing arrangements suitable to fix the flameproof light fitting at site complete all as specified and as directed.
Dismantling and taking down unserviceable tube light/recessed ceiling fitting of any capacity, including disconnecting the cable connections complete all as specified and as directed.
Supply & fix LED tube light along with fixture, 1x20 W, surface and wall mounted LED batten, extruded aluminium housing & integrated electronic drive complete all as specified and as directed.
Supply and fix switch piano 5 Amp, flush type,single pole complete all as specified and as directed.
Supply and fix ceiling rose surface type bakelite / PVC three terminal 65 x 50mm complete all as specified and as directed.
S&F Fan Regulator, electronic, stepped type, 120W complete all as specified and as directed complete all as specified and as directed.
S & F Ceiling Fan 1200 mm sweep, BEE certified, energy efficient ,white colour, 230 volts including blades, canopy and downrod including 3 core copper electric cable connection from ceiling rose to fitting terminal , fixing on ceiling using all necessary accessories like clamp, fasteners, nuts and bolts etc complete all as specified and as directed.
Material and labour for providing point wiring with two runs of 2.5 Sqmm multi stranded copper conductor FRLSH PVC insulated single core 1100 volts grade & with one run of 1.5 Sqmm single core copper stranded FRLSH PVC insulated 1100 volts grade wire for continuous earthing complete in and including PVC casing and caping with all fittings / fixture etc and open recessed type Plastic Enclosure (Plastic Switch Board) ISI marked (IS 14782) for housing one 15 A Switch / sockets complete all as specified and as directed.
Supply and fix switch piano flush type 15 Amp one way complete all as specified and as directed.
Supply only socket outlet 2-in-1, 3 pin ,5 and 15 amps, flush type complete all as specified and as directed.
Taking down carefully by unscrewing the unserviceable DB Boxes, MC distribution boards SP & TPN with porcelain cutouts etc complete all as specified and as directed.
Taking down the sub main wiring of any dia / sq mm on teak wood batten / PVC conduit GI earth wire complete all as specified and as directed.
M & L for sub main wiring with four runs of single core 10.0 Sq mm FRLSH PVC insulated unsheathed multi stranded copper conductor 1100 V grade with colour code and two runs of 6.0 Sq mm single core FRLSH PVC insulated unsheathed multi stranded copper conductor green colour cable as earth continuity conductor drawn in & including steel conduit complete all as specified and as directed. ( Note:- Four runs of 10.0 Sqmm copper cable,two runs of earth wire 6.0 Sqmm copper cable including steel conduit shall be measured & paid as one length).
S&F Vertical double door Distribution board TPN 4 way 200 A rated busbar consisting of MCCB. 100 A 10KA - 1 No. complete all as specified and as directed.
M&L for MCB SP 6-32 Amps C curve and electric connections with copper thimbles complete all as specified and as directed.
M&L for earth continuity conductor or main earth lead GI 4mm dia buried in ground / fixed on wall / drawn in Rigid steel conduit complete all as specified and as directed.
Earthing complete with galvanised iron earth plate electrode 600 mm x 600 mm x 6mm as earthing lead buried directly in ground vertically to a depth not less than 2.25 Mtr deep below ground level with top edge of the plate not less than 1.5 Mtr below normal ground level connected to and including galvanised earth lead wire 4 mm dia by means of bolts, nuts, check nuts & washers etc connected to DBs all as shown in electrical plate No.3 of SSR Part I of 2009 & as specified or indicated and testing on completion including excavation / earth work in any type of strata, PCC ( 1:3:6 ) type C1 earthing chamber, pre cast slab cover 50 mm thick in cement concrete ( 1: 2 : 4 ) type B 1 ( reinforced with welded steel wire fabric (XPM) weight not less than 4 Kg / Sqm), funnel with wire mesh, watering pipe of 20 mm bore medium grade,including GI wire 4 mm dia with GI protection pipe of 15 mm medium grade up to 7.5 meter length etc complete all as specified and as directed.
Material and labour for providing point wiring with two runs of 1.5 Sqmm multi stranded copper conductor FRLSH PVC insulated single core 1100 volts grade & with one run of 1.5 Sqmm single core multi stranded copper conductor Flame retardant PVC insulated 1100 Volts grade wire for continuous earthing complete in and including PVC casing and caping with all fittings/fixture etc and open recessed type Plastic Enclosure( Plastic Switch Board ) ISI Marked (IS:14772) for housing switches / sockets complete all as specified and as directed.
One light point controlled by one switch .
One Fan point controlled by one regulator /switch.
One 3 pin socket 5 A on the same switch board.
Supply and fix switch socket combination 2 in 1, 5 A flush type complete all as specified and as directed.
Supply and fix switch socket combination 5 / 16 A, 5 in 1, flush type complete all as specified and as directed.
Supply and fix sheet metal enclosure MCB DB double door SPN 8 way 230 V with neutral link and with 200 A bus bar complete all as specified and as directed.
Supply and fix sheet metal enclosure MCB DB double door SPN 4 way 230 V with neutral link and with 200 A bus bar complete all as specified and as directed.
Supply and fixing in replacement of LED highbay light with PDC housing, integral driver, frame, toughened glass & IP 66 protection, 80 Watt, 220/215 Volt 50 Hz with surge protection of 5 KV and housed in pressure die cast and system lumen output should not be less than 120 lumen per watt complete all as specified and directed.
Supply and fix MCB SPN 240 V, 6 to 32 Amps. complete all as specified and as directed.
Supply and lay cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 sq mm 2 core complete all as specified and as directed.
Excavation in trenches not exc 1.5 m wide and not exc 1.5 m in depth and getting it out for laying of cable / pole etc.
Soft/loose soil
Hard/dense soil
Soft/disintegrated rock
Returning/ Refilling of excavated soil including spreading levelling and well ramming in layers for any type of soil complete all as specified and as directed.
Removing the surplus spoil to a distance not exceeding 50 mtrs from the starting point and depositing at a height not exceeding 1.5 m above ground level complete all as specified and as directed.
Material and labour for stone dust sand cushioning to under ground cable, provided with a layer 8 cm before and 15 cm after laying and stretching jointing and testing the cable complete all as specified and as directed. [Note : Measuremenet will be done after punning]
Supplying and laying un-reinforced precast concrete cable cover, class I, flat, size 250mm x 150mm x 40mm for cable protection complete all as specified and as directed.
Vastushilpa Contrustion
Smruti Construction
Parmanand Enterprises
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .