PROVISION OF ADDITIONAL TOILETS FOR AGNIVEER VAYU TRAINEES OF 9 TETTRA SCHOOL AND PROVISION OF VIEW CUTTER OVER EXISTING LOW HEIGHT SECURITY WALL IN DOMESTIC AREA AT AF STN PUNE UNDER GE AF LOHEGAON

Amount

Surface dressing n exc 15cm deep for soft/loose soil etc complete all as specified

M&L Sand filling under floors or in foundations including watering and consolidatione

M&L for PCC (1:4:8) type D-2 ,using 40mm graded stone aggregate as in foundation filling & mass concrete all as specified

M&L old size fly ash Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in CM 1:4 complete all as specified

M&L old size fly ash Brickwork with sub-class `B’ bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4

M&L Damp proof course in cement concrete type B0 1:2:4 40mm thick horizontal or vertical surfaces including necessary formwork

M&L ATT to backfill in contract with foundation at the rate 7.5 ltrs of emulsion per Sqm of vertical surface (Area of the substructure in contact with backfill to the measured) complete all as specified and as sirected by Enginner-in-charge .

M&L ATT to top surface of filled earth at the rate of 5 ltr of emulsion per Sqm of surface area.

M&L ATT to external perimeter of building at the rate of 2.25 ltrs of emulsion perimeter of wall .

M&L RCC (nominal mix) in lintel Beams, bands , cantilevers, bressumm ers, lintels over 1.5m span of type B-0 1:2:4 by using 12.5mm grade aggregate etc complete all as specified

M&L RCC ( nominal mix)Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves of type B-0 1:2:4 by using 12.5mm graded aggregate and the like etc complete all as specified

M&L Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete rail?ings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls,rough finished horizon?tal or sloping and similar work exc 10cm but n exc 20cm wide

M&L Formwork to sides and soffits of floor or roof beams, beam haunch ings, girders, bressummers,lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors andbeams, etc. complete all as specified

M&L Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping

M&L MS TMT bars 10mm dia and over as in reinforcement cut to length, bent to shape required including cranking bending spirally for hooping for columns, hooking ends & binding with and including MS annealed wire not less than 0.9mm dia.complete all as specified and directed.

ditto as above but 6mm to 8mm dia as in stirrups etc complete all as specified

M&L Cutting chases, pinning in brickwall , making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting exceeding 20cm girth etc complete all as specified

S&F GI pipe medium grade 15 mm dia bore galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

S&F GI pipe medium grade 20 mm dia bore galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

S&F GI pipe medium grade 25 mm dia bore galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

S&F GI pipe medium grade 32 mm dia bore galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

S&F Rotational moulded polyethylene water storage tanks of 1000 ltrs capacity (cylin-drical vertical with closed top) hoisted and fixed in position complete all as specified in SSR Part I .

S&F of Ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed to 20 mm bore pipe complete all as specified and directed.

S&F PVC valveless, syphonic action type flushing cistern, low level, white,with inlet, ball valve, float and handle 10 ltrs capacity incl brackets.

S&F vitreous china counter wash basin white flat back size 560X410X180 mm rested on counter including waste coupling and PVC waste pipe 75 cm long connecting to PVC connection etc complete all as specified .

S&F Bib tap cast copper alloy fancy type chromium plated screwed down, screwed for iron pipe or for brass ferrule and fixed 15mm dia fixed

M&L Centre hole basin mixer without pop up Pillars taps fancy type cast copper alloy fancy type chromium plated screwed down, screwed for iron pipe or for brass ferrule and fixed 15mm dia fixed.

S&F looking mirror for counter wash basin of desired shape etc complete all as specified

S&F PVC SWR floor trap of diameter of outlet 75mm including jointing to waste pipe fixed in cement concrete type B1 (1:2:4).

S&F Grating doom 100mm dia of stainless steel without hole all as specified and directed.

S&F Grating doom 100mm dia of stainless steel all as specified with hole and directed.

S&F 20mm bore Stop valve Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed etc complete all as speified

S&F 32 mm bore Stop valve Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed etc complete all as speified

S&F Corner glass shelf 300mm with brackets all as specified and directed.

S&F Health faucet (ABS body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 mtr long flexible tube and ABS wall hook including making connections and fixed in position complete in all as specified.

S&F in brass chromium plated shower rose 125mm size with swivel joints including fixing to steel pipe or union complete all as specifed and as directed.

S&F wall mixter 3-in-1 system with provision for both hand shower complete with 115mm long bend pipe connecting legs and wall flange (wihtout hand and over head shower) all as specified and directed.

S&F Angular stop cock with flange , cast copper alloy,screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed

S&F Two way bib cock with wall flange 15mm dia all as specified and directed.

S&F 15 mm dia CP brass PVC connection 45 cm long including check nuts etc complete all as specified and directed

S&F Tubular towel rail 20mm dia 600mm long CP complete all as directed

S&F Vitreous China Urinal, full stall type, white (excluding flushing cistern, flush pipe andwaste pipe) including Push tap any colour high pressure of CP screwed for iron pipe and fixed and Urinal spreader of CP any colour for fixing with15 mm dia pipe. (Minimum weight 60gms) connected with PVC connection of 600mm length and 15mm size

S&F vitreous chinaware EWC including connection to drain or outgoing pipe and to PVC flushing pipe, antisyphonage pipe, PVC low level flushing cistern 10 ltr capacity with brackets of approval Make and all necessary fittings etc complete all as directed and specified incl PVC seat cover

S&F 75mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specifed and directed.

S&F 110 mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specifed and directed.

M&L for PVC (SWR) bends of any radius with oval and access door of 75mm dia complete all as specifed and directed.

M&L for PVC (SWR) bends of any radius with oval and access door of 110 mm dia complete all as specifed and directed.

S&F 110mm dia of PVC (SWR) branch piece, single (Single T) equal or unequal with oval and access door all as specified and directed.

S&F 75 mm dia of PVC (SWR) branch piece, single (Single T) equal or unequal with oval and access door all as specified and directed.

M&L for PVC (SWR) vent cowl of 110mm dia

M&L for jointfree non-skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sq m but not exceeding 0.18 sqm in floors {Superior/Premium quality}, set and jointed in neat cement slurry and pointed in colour cement to match the shade of tile over and including 15 mm thick screed bed in CM (1: 6) complete all specified and directed.

M&L for joint free Glazed Ceramic Coloured Tiles, 450X300X7mm thick in size, set on Vertical Surfaces such as Skirting, Dado, etc,over and including 10mm thick rendering in cement mortar 1:4 Set and Jointed in Neat Cement Slurry and Pointed in White or Coloured Cement to match the shade of the Tiles, complete all as specified and as directed.

M&L for 15 mm thick rendering in CM 1:4 on brick or concrete surfaces finished even and smooth on wall with WPC as 3% of qty of cement being used as per manufacturer's instructions complete all as specified and directed. Note: WPC shall be measured and paid separately

Supply only liquid water proofing compound etc complete all as specified

M&L for 10 mm thick rendering in CM 1:6 on brick or concrete surfaces finished even and smotth on wall complete all as specified and directed.

M&L for preperation of newly plastered surfaces of walls and applying three coats of white wash complete all as specified and directed.

M&L for prepartion of newly plastered surfaces and applying two coats of cement based paint over a coat of alkali resistant primer on wall complete all as specified and directed.

S&F solid PVC door frame of size 50mm X 47mm made out of 5mm plain coloured PVC sheet reinforced with MS Square tube complete all as specified and directed .

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as directed .

S F Butt hinges, extruded aluminium alloy with galvanised 100 mm long mild steel hinge pin, anodised and fixed, type B-21

S&F for 150 mm extruded Aluminium aloy handles, febricated type anodised complete all as specified and directed .

S&F for 150 mm size aluminium anodised barrel tower bolt of extruded section complete all as specified and directed .

S&F for 300 mm Sliding door bolt aluminium alloy, anodised, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

S&F Anodised aluminium frame powder coated to (minimum thickness of powder coating 50 micron) for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

S&F sheet glass 4.0 mm thick in glazing with rubber and aluminium beading/packing with rubber gasket complete as specified and directed.

S&F Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and as directed.

S& F Anodised aluminium window and ventilator shutters, powder coated fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified all as specified and directed.

S&F almunium powder coated louvers for ventilltor 4/6 blades fixed to almunium frame complete all as specified and directed .

M&L granite 18-20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platform and like in CM (1:4) incl pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade complete all as specified and as directed.

Labour only Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations etc complete all as specified .

M&L Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165

S&F Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates Fe 410 -W (Gde E- 250)quality A

M&L preparing steel surfaces over 10cm width or girth and applying two coat synthetic enamel paint over a coat of red oxide primer complete all as specified all as specified and as directed .

S&F Pre-painted galvalume alumunium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering / cladding to wall ,fixed with self tapping screws as specified

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

M&L for hardcore of gauge n.exc 63 mm ,deposited ,spreading and levelled in layers n exc 15cm thick,watered and rammed to a true surface etc complete all as specified and directed .

M&L for 75mm thick PCC 1:3:6 type C-2 (using 40mm graded stone aggregate as in sub base of floor and path, plinth protection etc.complete all as specified and directed.

M&L Forming Contraction (Dummy) joints 30 mm deep x 10mm wide for plinth protection & similar work , filled with sealing compound Grade 'A' in plinth protection

M&L for PCC (1:3:6) type C2 concrete bed to drain pipes of dia 150mm dia including packing under and haunching against the sides of pipes after they laid and tested.as reqd on ground condition.

M&L for PCC (1:3:6) type C2 concrete bed to drain pipes of dia 200mm dia including packing under and haunching against the sides of pipes after they laid and tested.as reqd on ground condition.

M&L for Reinforced concrete pipes class NP-2, laid and jointed complete with collars if required for 150mm dia pipes.complete all as specified and directed.

All as per item No 81 as above but for 200 mm dia pipes.

M&L for PCC type C-2, (1:3:6) , using 40mm graded crushed stone aggregate as in lean conc , sub base ,or mass conc , foundation filling etc all as specified and directed.

M&L PCC 1:2:4, 25 mm thick type B0 using 12.5mm graded stone aggregate as in floor finished even and fair with out using extra cement complete all as directed by Engr-in-charge.

M&L PCC 1:3:6 type C2 using 12.5mm graded stone aggregate as in bedding or surface channel and drains complete all as specified.

Extra for forming fair finished channel or drain up to 30 cm inner girth in cement concrete using extra cement including forms, moulds mitered/stopped ends etc. all as directed by Engineer-in-Charge.

Add extra for every 2.5 cm or part there of over 30cm girth of item No 7 here in before .

M&L for precast RCC (1:2:4) type B1 using 20mm graded stone aggregate as in cover slab (for manholes etc) and set in cm 1:6 including necessary form works complete all as specified and directed.

M&L PCC 1:2:4 type B0 using 12.5mm graded stone aggregate as in coping ,rounded or chamfered on edges complete all as specified and directed.

M&L for 15 mm thick rendering in CM 1:3 on brick or concrete surfaces with WPC compound with 3% of qty of cement being used as per manufacturer's instructions finished even and smooth on wall complete all as specified and directed.( Note : The WPC is measured and paid in different item)

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm in any type of soil

Supply and fixing mild steel work as in angle iron, flat iron of any size for post and struts as in fencing including, cutting tops to shape as directed, drilling holes, notching for wire etc, flat iron fillets for securing wire mesh ,chain link fencing etc including all necessary drilling bolting or riveting etc and/or fixing with screws, bolts etc. and similar work conforming to Fe-410-0 or Fe-310-0 complete all as specified and as directed.

M&L Chimney bars(straight or camber),bearing bars for fencing ,ton-gues or water bars for window frames, window guard bars,plain,let in and fixed independently in wooden frames,Lor Tsection supports for shelves etc,and similar articles conforming to Fe-290 Gde E-165.

Fixing only Chain link fencing including line wires, any mesh size and type to any type of standards,rails, straining bolts,etc.including provision of binding wire.

Supply only chain link MS galvanised fencing of weight not less than 3.5 Kgs per sqm and size as directed by Engr-in-charge.

M&L for PCC type B2, (1:2:4) , using 40mm graded crushed stone aggregate as in lean conc , sub base ,or mass conc , foundation filling etc. all as specified and directed.

S&F Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed

S&F 5 to 10mm diameter Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 10cm long

Excavating in trenchs not exceeding 1.5 metre wide and not exceeding 1.5 metre in depth and not exc 10 Sqm on plan in any type of soil and getting out any type of soil all as spd.

Returning, filling in (soil) including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick in any type of soil all as spd.

Removal of excavated material (soil) to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.5m above the starting point all as spd.

M&L Cement concrete M-10 (Nominal mix) using 40 mm graded crushed stone aggregates in foundation filling and mass concrete complete all as spd.

Form work to sides of concrete fdn footing base of columns and raft beams sides and soffits (if any) of plinth beams.

Form work to sides of pillars, posts, struts, pier, columns square, rectangular or polygonal rough finished surface of concrete.

M&L for RCC M-25 design mix as in fdn, including raft, fooling fdn beams plinth beams bases for columns.

M&L for RCC M-25 design mix as in columns , pillars, piers, posts and struts etc.

M&L for framed work such as steel doors, gates or other section or angle, Fe-410-W Gde E-250 of quality "A' complete.

S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240

M&L Plastering 10mm thick in cm 1:4 on fair face of brick work or concrete surfaces finished fair even and smooth w/o using extra cement.

S&F aluminium composite sheet (ACP sheet)as per manufacture instruction on pillar of Gates all as specified and directed.

Material and labour Pre-cast cement concrete block type C1 1;3:6 masonry with solid blocks, exc. 10 cm in width and setting in mortar and set in cm 1:4 complete all as specified.

S&F 5 to 10mm diameter Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 10cm long

M&L for Point wiring with 1.5 sqmm copper conductor cables (multistranded), FRLS PVC insulated, insulated single core 1100 volts grade & with one run of 1.5 Sqmm single core copper stranded FRLS PVC insulated 1100 volts grade wire for continuous earthing complete in and including PVC casing and caping unsheathed (using colour code as per IS), 1100 Volts grade in and including 3 mm thick plastic laminated sheet top cover for one light /fan/exhaust fan point controlled by one, one way 5 Amp switch with and including continuous 1.5 sqmm copper conductor (multistranded using colour code) FRLS PVC insulated and unsheathed cable as earth wire connected to earth dolly complete all as specified and directed.

(a )One light point controlled by one switch.

(b) One Exhaust/Wall mounted /Ceiling point controlled by one regulator/switch

(c) One 3 pin socket 5 A on same board.

Material and labour for providing point wiring with two runs of 2.5 Sqmm multi stranded copper conductor FRLS PVC insulated 1100 volts grade wire for continuous earthing complete in and including PVC casing and caping unsheathed (using colour code as per IS), 1100 Volts grade in and including 3 mm thick plastic laminated sheet top cover for housing one 15 A Switch / sockets with and including continuous 2.5 sqmm copper conductor (multistranded using colour code) FRLS PVC insulated and unsheathed cable as earth wire connected to earth dolly complete all as specified and directed.

Material and labour for providing point wiring with two runs of 4 Sqmm multi stranded copper conductor FRLS PVC insulated 1100 volts grade wire for continuous earthing complete in and including PVC casing and caping unsheathed (using colour code as per IS), 1100 Volts grade in and including 3 mm thick plastic laminated sheet top cover for housing one 15 A Switch / sockets/ Industrial socket with and including continuous 4 sqmm copper conductor (multistranded using colour code) FRLS PVC insulated and unsheathed cable as earth wire connected to earth dolly complete all as specified and directed.

S&F Sub Main Wiring with FRLS PVC Insulated multistranded copper conductor wires of size 2x6.0 sq. mm + 1x6.0 sq. mm earth wire in casing caping complete as directed. Note : for Item No 6 One run of phase wire one run of Neutral wire and one run of Earth wire and one run of casing and capping shall be meassured and as one length.

S&F sheet metal enclosure with socket plug top , single pole and neutral enclosure with two pin earth plug and socket complete with one MCB SP of capacity 20 Amps including fixing concealed in wall and making good the disturbed surface complete all as directed

Supply and fix sheet metal enclosure MCB DB double door SPN 8 way 230 V with neutral link and with 200 A bus bar including fixing concealed in wall including cutting chasing in stone masonary / Brick masonary and making good the disturbed surface making all nacessary incomming and out going connections using proper size copper thimbles complete all as required on site all as directed

S&F MCB SPN 40 to 63 Amp 10 kA 240 Volt, 'C' Curve and electric connections with copper thimbles complete all as specified and directed by Engr-in-Charge.

M&L for switch piano flush button single pole one way 5/6 amps 240 volts

M&L for Switch piano flush button single pole one way 15/16 amps 230 Volts.

M&L for socket 5 amps 5 pin flush type, 230 volts.

M&L for socket out let, 6 pin 5 and 15 amps multi purpose 2 in 1 flush type, 230 volts

M&L for ceiling rose surface bakelite 3 terminals

S&F Lamp holder insulated body with back plate for dome batten fittings.

S&F MCB SP 240 volt 6 to 32 A 'C' series complete

S&F MCB SPN 240 volt 6 to 32 A 'C' series complete

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete

Supply and fix high quality indoor Surface and wall mounted LED batten 22 Watt, provided for efficient heat dissipation with polycarbonate diffuser & integrated electronic driver complete with all accessories internally pre-wired and including connecting up with three core 0.5 Sqmm flexible copper conductor cable ceiling rose to fitting terminal.

Supply and fix exhaust fan, Heavy duty with steel body AC single Phase. 230V of size 300 mm sweep 900 RPM with blades, frame, louvers made out of aluminium shhet of 0.5 mm thick with frame, anchor fastners for mounting fan, 1.5 Sqmm 3 Core cable from Ceiling rose to fan complete all as specified and directed.

Supply and fix electric water heater, storage type steel body with copper inner tank and heating element 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece, 4 Nos fasteners etc incl suitable hot and cold water pipe

Taking down the existing street light fitting and Supply & fix (in Repalcement) energy saving and environmental friendly long life LED Street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with impact and corrosion resistant including thermal management in multiple optics IP 65/IP66 road way luminaries with LEDs as light source and lens embedded PC cover /toughened glass and impact resistance of IK07 and electronic driver fixed on pole/wall with and including suitable dia size bracket as per manufacturer recommendation, bracket complete with MS flat iron clamps (clamp shall be 40x5 mm MS flat), nuts and bolts and washers painting the clamps with coat of aluminium paint over a coat of red oxide primer including connection complete all as specified.

S&F LED Lamp 09 watt 230 volts complete all as specififed and direccted.

M&L for providing earthing complete with galvanised iron earth plate electrode 600 mm x 600 mm x 6mm as earthing lead buried directly in ground vertically to a depth not less than 2.25 Mtr deep below ground level with top edge of the plate not less than 1.5 Mtr below normal ground level connected to and including galvanised wire4 mm as earthing lead by means of bolts, nuts, check nuts & washers etc made of GI and connected to earthing test point, providing charcoal and common salt all as shown in electrical plate No. 5 of SSR Part I of 2009 & as specified or indicated and testing on completion including exaction/earth work in any type of strata PCC (1:3:6) type C1 earthing chamber, pre cast slab 50 mm thick in cement concrete (1:2:4) type B1 (reinforced with welded steel wire fabric (XPM) weight not less than 4 Kg/sqm), funnel with wire mesh, watering pipe of 20 mm bore medium grade and lugs, including galvanised iron wire 4 mm with GI protection pipe of 15 mm medium grade 7.5 meter long, etc complete all as specified.

Supplying & Laying GI pipe medium grade in trenches indluding all fittings as directed of following sizes:- (a) 25 mm bore

Excavating in trenches n.exc 1.5 Mtr wide and n.exc 1.5Mtr deep for pipe line getting out and levelling of bottom surface to required level complete.

(a) Soft/loose soil

(b) Hard/dense soil

(c) Soft/disintegrated rock

Supply and fix gun metal gate valves with iron wheel head, screwed both ends for iron pipe ISI marked as per IS 778 of following sizes (a) 25 mm bore

Supplying ,Laying, jointing, testing and commissioning of LT under ground cable 1100 volts grade XLPE (cross linked polythene ) armoured with galvanised round steel wire or steel strip , electric power cable heavy duty, with multi stranded aluminium conductor, laid in trenches, ducts fix on walls/poles with proper size saddles and clamp laid under roads/path/ drain /colverts or enclosed in GI pipe/ fix complete including Taking out of old unserviceable UG cable and all as specified for following size:- (a) 10 sqmm 2 core

Material and labour for stone dust sand cushioning to under ground cable, provided with a layer 8 cm before and 15 cm after laying and stretching jointing and testing the cable all as specified and directed. [Note : Measuremenet will be done after punning]

Supplying and laying un-reinforced precast concrete cable cover, class I, flat, size 250mm x 150mm x 40mm for cable protection

Supply and fix GI Pipe Light grade with all connected accessories of sizes 100 mm dia complete all as specified and directed by Engr-in-Charge.

AJINKYA VIKRAM GAIKWAD