REPAIRS TO FLOORING, ROOFING LEAKAGE/SEEPAGE WATER PROOFING TREATMENT JOINERY ROLLING SHUTTER AND CERTAIN CIVIL WORKS AT OTM AND MD ACCN AT CABS INS TANAJI NOFRA AND NSB UNDER GE (NW) MANKHURD

Amount

Dismantlling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles store & rubbish off the premises all as specified and as directed.

M&L for non skid coloured ceremic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm in floors over and including screed bed or bedding layer of mortar 15 mm thick in cement mortar 1:6 set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface complete all as specified and as directed.

M&L for coloured glazed ceramic tiles 300x200x6 to 7mm thick set and jointed in neat cement slurry and pointed with coloured cement as in skirting/dados including 10mm thick rendering in CM 1:4 as in backing coats of tiles finished the surfaces rough to receive tiles etc complete all as directed and specified.

M&L for providing 300x300x 7-8 mm thick non skid Digital dark coloured tiles as in floors over and including screed bed or bedding layer of mortar 20 mm in cement mortar 1:6 set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface complete all as specified and as directed.

M&L for Digital coloured wall tiling of 300x600x 7-8 mm thick on vertical surfaces, skirting/dados etc including rendering 15 mm thick in cement mortar 1:4 set and jointed in neat cement slurry and pointed in white / coloured cement to match the surface complete all as specified and as directed.

M&L for non skid coloured ceramic tiles 400x400x6 to7mm thick in floors etc set and jointed in neat cement slurry and pointed with coloured cement to match the shade complete over and including 15 mm thick in CM 1:6 screed bed for laying floor finishes all as specifed and directed..

All as per items No 6 above but in skirting or in dado including 10 mm thick rendering CM 1:4 complete all as specified and directed

M&L for non skid coloured ceremic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, as in floors over and including screed bed or bedding layer of 15 mm thick in cement mortar 1:6 set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface complete all as specified and as directed.

Description all as per Serial item No 8 here-in-above but screed bed or bedding layer of 10 mm in cement mortar 1:4 on walls surfaces, such as skirting etc all as specified and as directed.

S&F Vitrified light shade ceramic tiles 10 mm thick (square/rectanglar) polished area of each tile not exceeding 0.36 sqm ,in floors etc., set and jointed in neat cement slurry and pointed in white or Coloured cement to matched including 15mm thick screed in CM 1:6 complete all as specified and as directed.

Ditto All as per item No 10 but as in skirting /dado laid over 10 mm thick bedding layer of CM 1:4 complete all as specified and as directed

M&L for Durastone Heavy Duty vitrified tiles 300x 300 x 9-10 mm thick in floor set and jointed with neat cement slurry and pointed in coloured cement to match over and including screed bed 20 mm thick in cement mortar 1:6 complete all as specified and directed

Demolition cement concrete (unreinforced) in ground floors and pavings n. exc 15 cm thickness (below or above ground level) all as specified and as directed.

M&L 75 mm thick plain Cement concrete type D2, 1:4:8 (using 40 mm graded aggregate) as in sub base of flooring complete all as specified and as directed

M&L for 75 mm thick PCC 1:3:6 type C2 (using 40mm graded stone aggregate) as in plinth protection with expansion joints & top surface finished even and smooth without using extra cement etc complete all as specified and directed.

Demolition of stone slabs and tiles laid beded and pointed in any mortar of any description or thicknes in floors, aprons etc all as specified and as directed.

M & L for Machine cut cudappah stone slab 18-20mm thick laid and mixed with pigment to match the shade of the slab as in window cills, jambs to full thickness of wall steps over and including cement screed bed 10mm thick in CM 1:4 and jointed with grey cement paste and slurry including rubbing and polishing complete all as specified and directed

M&L Granite (of any type) Tiles 20mm thick in floor machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone over and including 20mm thick CM 1:6 screed bed for laying floor finishes and cutting and polishing complete all as specified and as directed.

M&L 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. over and including screed bed or bedding layer of mortar 15 mm in cement mortar 1:4set and jointed in neat cement slurry and pointed in white or coloured cement to match Colour is approved by GE all as specified and as directed.

M&L Machine cut kota stone slab flooring 20-25mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over and including screed bed or bedding layer of mortar 20 mm thick in cement mortar 1:6 complete all as specified and as directed.

M & L 20 mm thick Baroda Green Marble Stone Slabs as in flooring, treads, risers, landing etc bedded, jointed and pointed with grey cement slurry mixed with pigments to match with the shade of slab including cutting and polishing, laid over and including 15 mm thick screed bed in CM 1:4, complete all as specified and directed.

Taking down shutter of any description exceeding One Square Metre and not exceeding Two Square Metre each complete all as specified and as directed.

Taking down chowkhat or frame (without taking off shutter from the frame) not exceeding 1.5 Square Metre each , removing from the site including cutting holes required for taking out existing hold fast etc. complete all as specified and as directed.

All as per serial Item No 23 herein above but exceeding 1.5 Square Metre and not exceeding 04 Square Metre each complete all as specified and as directed.

Demolition of brick work or stone/boulder, masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facing and pre-cast concrete articles complete all as specified and as directed

M&L for Brick work with sub-class `B' bricks, straight or curved on plan exceeding 6 M mean radius built in cement mortar (1:6) all as specified and as directed.

M&L PCC (1:2:4) type B1 using 20 mm graded stone aggregate as in hold fast, bed plate etc including necessary form work complete all as specified and as directed.

S&F Mild steel work as in band, straps, supports for RWP, clamps, hold fasts, wall ties, , hooks & pintle hinges and similar small articles conforming to Fe-290-0 or Gde E-165 all as specified and as directed.

M&L for Preparing surface of wood and wood based materials, steel and iron work, new or old, treating ends of posts, coal tar black paint on back of chowkats area exc 0.10 Sqm but not exc 0.5 Sqm each complete all as specified.

M&L for treating with tar or coal tar black paint on back of chowkats, ends of posts, holdfasts etc. area not exc 0.1 Sqm each complete all as specified.

M & L for Sanding newly tarred or painted surface with clean sharp sand (Hold Fast)

Supply & Fixing 2nd class hard wood plain ,solid straight chowkats and frames of wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints all as specified and as directed.

S&F for 35 mm thick flush shutters, solid core construction with block board core and plywood face panels, commercial type on both sides and fitted to chowkhats complete all as specified and as directed.

S&F 35 mm thick Plain, framed, paneled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of 12 mm thick veneered particle board medium density, wood particle board with commercial face veneers on both faces with Seesham wood beading all round the panel made out of 20 x 15 mm , on one side and fitted to chowkhats complete all as specified and as directed.

S&F Glazed and Skelton shutters, 35 mm thick of Second class hard wood open rebated and prepared to receive glass, gauge etc without sash bars) edges of framing plain chamfered or rounded, fitted with cut and mitred beads for securing glass, etc, sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.24(a) (Door Shutters) complete all as specified and as directed.

Supply & Fixing solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube, fixed in opening as per specification & drawings complete all as specified and as directed.

M&L for factory made solid panel PVC door shutter 30mm thick consisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rails, paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and joint together with solvent supplying and fixing in the frame at site as per specifications and drawing given under SSR Part II 2010 complete all as specified and directed.

S&F Factory Made Solid PVC Moulded Door Shutters with wood free EPS 28 to 30 mm thick (stile:), with 2,4 or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC Sheet on back face, supplying & fixing in frame at site as per specification & drawing all as specified and as directed.

S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples all as specified and as directed.

All as per Serial Item No 39 above but fixed as in repairs complete all as specified and as directed .

M&L 15 mm thick rendering in cement mortar 1:4 on brick or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed.

S&F 100 mm size stainless steel butt hinges medium weight fixed with stainless screw all as specified and as directed.

S&F aluminum anodised barrel tower bolts of extruded section of size 150 mm length all as specified and as directed.

S&F aluminum anodised barrel tower bolts of extruded section of size 100 mm length all as specified and as directed.

S&F Aluminium handle, cast type anodized size of handle 150 mm complete all as specified and as directed.

S&F Aluminium handle, cast type anodized size of handle 100 mm complete all as specified and as directed.

S&F Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed length of bolt 250 mm complete all as specified and as directed.

S&F Floor door stopper of Aluminium alloy body and tongue, overall length of cover plate 140 mm , anodized, with hard drawn steel spring , fixed to shutters complete all as specified and as directed.

S&F in repair for aluminium (Die cast body) hydraulically Door closer regulated, designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg all as specified and as directed.

M&L in repairs for Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed all as specified and as directed.

M&L Preparation of new or untreated painted wood and wooden based surfaces of any description not other wise described over 10 centimetre width or girth and applying Two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

Material and labour for three coat white wash on walls including preparation of new wall surfaces complete.

Material and labour 2 coats of oil bound distemper on newly plastered undecorated surface of walls including preparation and finishing surface with approved primer.

M & L for preparation of new plastered surfaces of wall, chajjas, soffitis, beam, column etc and applying two coats of 100% anti fungal acrylic exterior emulsion paint over one coat of primer all as per manufacturer's instructions including necessary scaffoldings etc complete all as specified and directed.

Taking down carefully existing aluminium sliding window shutters,(glass/wire mesh) /frame not exceeding 1.5 Square Metre each and re-fixing the shutters in existing position, complete all as specified and directed.

Taking down carefully existing aluminium sliding window shutters,(glass/wire mesh) /frame exceeding 1.5 Square Metre and not exceeding 04 Square Metre each and re-fixing the shutters in existing position, complete all as specified and directed.

Taking down carefully existing aluminium sliding window shutters, taking down of existing stainless steel wire mesh from aluminium sliding window shutters including existing rubber gasket complete, supply and fixing stainless steel wire mesh of dia 0.36 mm and average width of aperture 1.40 mm with and including provision of "U" clip, new rubber gasket, re-fixing the shutters in existing position, complete all as specified and directed.

Taking down existing aluminium joinery of any description (frame/ shutters) with all fittings (but excluding grills) complete all as specified and directed.

S&F standard aluminum section powder coated in partition / frame and door shutter, sliding windows / ventilators and places otherwise not specified cut to size, jointed with cadmium plated steel screws, including rubber beading or gaskets for fixing glass or wire cloth or Bakelite sheet and all necessary fittings, hinges, screws, plugs, locking arrangements for windows, Nylon ball bearing etc completed all as specified and directed. Note :- Weight of Aluminum sections for frames and shutters shall be only considered for payment. Cost of other consumables required for the item shall be deemed to be included in the quoted rate. However glass panes / Bakelite sheet / wire cloth / mortice lock / locking stay / floor spring / floor door stopper only will be measured and paid separately under respective items as supply only. Fixing by element of these items shall be deemed to be included in quoted rate.

Supply only stainless steel wire cloth of 0.36 mm nominal dia of wire and average width of aperture 1.40 mm , fixed in aluminium windows complete all as specified and directed.

Supply only 4.80mm thick glass ordinary quality plain not exc 0.5 Sqm each pane with including wooden/rubber beading or gasket for aluminium section complete all as specified and as directed.

Supply 12 mm thick prelaminated particle, board, interior grade, prelaminated both sides with decorative choice laminations, fixed with screws to aluminium frame work complete all as specified and as directed.

S & F in repairs aluminium anodised grill DG-104/DG-102 10 mm dia of extruded aluminium section of suitable size and frame including fixing with U clip or F section beading complete with all fitting and fixture and drilling required in RCC section in rectangular or arch type balcony opening of the building complete all as specified and directed.

Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets all as specified and directed.

Supply and fixing hot dipped GI imposed grid with 24mm wide T sect exposed flanges powder coated frame work comprising of main runner made from 0.33 mm thick GS sheet of size 24mmx32mmx3000 mm @1200 mm C/C GI wire 4mm dia fixed by rawl plug,level adjusters and screws etc flush fitting of 1200mm long cross tee interlocked between main runners @ 600mm c/c to form 1200mmx600mm modules cross tee longer than 600 mm to be supported independently 600mmx600mm modules shall be formed by fitting 600mm long cross tee centrally between 1200mm cross tee, perimeter wall angle shall be GS of size 19mmx19mm and 0.45 mm thick 300mm long including provision of 600mmx600mmx8 to 10mm thick armstrong gypsum reinforced board complete all as specified and directed.

Dismantling boarding any description fixed in any position with nails complete all as specified and directed .

S&F 18/19 mm thick prelaminated partcile board both sides , interior grade , of approved shade and pattern fixid with screws to timber frame for any work and all necessary fittings (hinges , screws , beeding piece haspstaple ), complete all as specified and directed.

S&F in repairs eaves guter of hard FRP Sheet (any size or pattern or in any location ) including all fittings, heads shoes, bend swan necks etc (measure overall as fixed along the centre line over fitting and accessories) all as specified and directed.

S&F 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls all complete all as specified and directed.

All as per item No 69 above but 75mm bore all as specified and directed.

S&F 110mm bore PVC (SWR) branch piece single (Single Y ) equal or unequal all as specified and directed.

S&F 110mm bore PVC (SWR) bend all as specified and directed.

S&F 75mm bore PVC (SWR) branch piece single (Single Y ) equal or unequal all as specified and directed.

S&F 75 mm bore PVC (SWR) branch piece double (double Y ) equal or unequal all as specified and directed.

S&F in repairs Steel rolling shutters, 1mm thick of laths with out ball bearing including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated push pull or manual type complete all as specified and as directed

M& L for preparation of new steel and iron surfaces of any description , over 10cm in width or girth not otherwise described and applying two coats of synthetic enamel paint over a priming coat of red oxide zinc chrome complete all as specified and directed.

S&F in repairs sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and waste; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm all as specified and directed.

S&F in repairs sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 485mm x 420mm bowl size 410mm x 330mm x 160mm all as specified and directed.

S&F in repairs 10 litre capacity high level/low level PVC flushing cistern with PVC flush pipe, brackets, and PVC connection complete all as specified and directed.

S&F in repairs Vitreous china wash down water closet pan “Pedestal Pattern” coloured with WC seat cover coloured closed pattern with flat bottom and mild steel chromium plated or aluminized hinging device including pvc flush pipe and joints etc and connection to drain, flushing, pipe, anti- syphonage pipe, and fixing arrangements with fixing bolts etc ,complete all as specified and directed

S&F in repairs Vitreous China squatting pan “Orissa ” pattern size 580 X 440 mm, white, with integral foot rests (excluding flushing cistern and flush pipe ) including connecting to trap and to flushing pipe, etc including making good to dismantled portion of floors with P:C:C type B-0 complete all as specified and directed.

S & F in repairs Vitreous China Wash hand basin white, flat back, size 550x400 mm size (flat back or angle back type)excluding taps, waste, chain and plug and porcelain stopper but including cutting for and pinning ends of brackets or erecting stand.incl taking down pillar tap complete all as specified and directed

S&F in repairs hand shower (health Faucet) with 8mm dia 1 mtr Long flexible tube & wall hook complete all as specified .

S&F in repairs 15 mm dia bib taps two way cock, cast copper alloy with crutch or butterfly handle, screwed down screwed for iron pipe or for brass ferrule fancy type chromium plated all as specified and directed.

S&F in repairs 15 mm dia bib taps, cast copper alloy with crutch or butterfly handle, screwed down screwed for iron pipe or for brass ferrule fancy type chromium plated all as specified and directed.

Taking up or down steel water tubing and connections of size 15mm bore, complete all as specified and directed.

Taking up or down steel water tubing and connections of size 20mm bore, complete all as specified and directed.

Taking up or down steel water tubing and connections of size 40mm bore, complete all as specified and directed.

Supply & fix 15mm bore GI tubing, medium grade with and including all fittings and fixed to walls and ceilings or laid in floors, complete all as specified and as directed.

Supply & fix 20mm bore GI tubing, medium grade with and including all fittings and fixed to walls and ceilings or laid in floors, complete all as specified and as directed.

Supply & fix 40mm bore GI tubing, medium grade with and including all fittings and fixed to walls and ceilings or laid in floors, complete all as specified and as directed.

S&F in repairs 15 mm dia pillar taps; of cast copper alloy with capstan; head chromium plated screwed downend with pressure with or without lettered hot or cold with long screwed shank and fly nuts, screwed for iron pipe& fixed complete all as specified and directed.

S&F in repairs 15mm dia of chromium plated Angle valves, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for and fixed all as specified and directed.

S&F PVC connections 15mm size with PTMT nuts of length 600mm

S&F Brass 60 mm economy pin cylindrical lock (one side knob/one side key) all as specified and directed. Make: Godrej

Demolition of plain cement concrete (unreinforced) in roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work including all necessary scaffolding /staging for working at any heights upto and including 24m as required and disposing off the rubbish to a distance exceeding 500m and not exceeding 1.0km complete all as specified and as directed.

M&L for PCC (1:2:4 ) type B-1 using 20 mm graded crushed stone aggregate as in levelling courses over RCC roof surface to achieve required slope including rounded or chamfered edges mixed with water proofing compound @ 3% by weight of cement and finishing surface even and smooth using extra cement etc complete all as specified and directed. Note :- WPC shall be measured and paid separately as supply only

Dismantling / taking out existing water proofing treatment (including cement screed bed below) from roof including loosened cement plaster and exposing the top surface of RCC slab and removing rubbish, etc. to a distance exceeding 500m and not exceeding 1.0km complete all as specified and as directed.

M & L for applying single component UV resistant acrylic liquid membrane in two coats of water proofing painting, laying glass fibre sheet in between two coats on plastered/concrete tile surfaces with Shalicryl LM of STP Ltd or equivalent material of Pidilite/Krishna Conchem etc all as per manufacturers instruction all as specified and directed

Material and labour for screed bed 15 mm thick on brick work or concrete surfaces finished even and fair in cement plaster 1:4, and complete with mixing water proofing compound all as specified and directed. Note:( wpc shall be measured and paid separately)

Supply only water proofing compound powder.

M & L for APP modified roof treatment over roof slab etc to be executed through approved authorised applicator of the membrane manufacturer with the following specifications, complete all as specified and directed:- (a) Applying oil bound bitumen primer @ 0.40 litre/ Sqm manufactured by the same manufacturer as that of APP with a density 0.87-0.89 Kg per litre at 25 degree centigrade on the prepared dry surface. (b) Laying APP modified water proofing membrane reinforced with non woven polyester fibre weight not less than 160 gm/ Sq mtr using butane torch by torch application with 10cm side lap and 15cm end lap. (c) Physical properties of membrane shall be as under:- (i) Membrane weight not less than 3.50 Kg/Sqm. (ii) Non woven polyester weight not less than 160gm /sqm. (iii) Softening point of membrane not less than 150 degree Celsius. (iv) Joint tensile strength-longitudinal not less than 650N/Sqcm and transverse not less than 450 N/Sqcm (v) Tear strength-longitudinal not less than 300 N & transverse not less than 250 N. (vi) Elongation : > 20% in both directions. (vii) Impermeability/water tightness at 2 Kgf/cm2. (viii) Water absorption - Not more than 1% on mass within 24 hours. (ix) Cold flexibility - Minimum (-) 20 degree celcius. (x) Dimentional stability % change = Maximum 1%. (d) Over the membrane provided a finishing with solar reflective bitumen aluminium paint @ 0.10 Kg/ Sqm as prescribed by manufacturer.

Disconnecting existing water storage tanks, setting aside (or lowering if required) for repairs to roof below, and replacing (or hoisting if required), re-fixing in position and re-connecting on completion of roof work complete all as specified and directed for the following capacities: upto and including 1000 litres

All as per item No 103 but 1000 litres upto and including 2000 litres Supply only water proofing compound powder.

Taking down cement plaster on brick or stone walls etc. including raking out joints, hacking for key scrubbing down with water complete all as specified and directed.

M&L for providing rendering on fair faces of brick or concrete surfaces in 10mm thick cement mortar 1:4 mixed with WPC @3% Supply only water proofing compound powder all as specified and directed. Note:( WPC shall be measured and paid separately)

Demolition of lime concrete or lean concrete from sunken floor including floor tiles, hacking of surfaces after cleaning with wire brush (floor and adjoining walls) and disposing off debris outside MD land, complete all as specified and directed.

M & L for filling of lean concrete 1:5:10 type E2 (using 40 mm graded stone aggregates ) in sunken portion, as per requirement, complete all as specified and directed.

M&L for PCC 1:2:4, type-B, using 20mm graded stone aggregated as in sub base of floors and for any other propose in any location mixed with WPC @ 2% by weight of cement, complete all as specified and directed. Note: Supply only WPC will be measured and paid separately.

M & L for special treatment for sunken portion of WCs/Bath & toilet etc executed in following stages : Stage 1: Providing 15mm thick plaster in CM 1:3 mixed with water proofing chemical of Dr.Fixit or Shalicrete 'R' of STP Ltd or equivalent in Krishna Conchem in the proportion/quantity all as per manufacturer's instructions. State 2 : Primer-Mix Tarfelt LM of STP Ltd or equivalent in Krishna Conchem/Pidilite (diluted with water in ratio 1:1) @ 250 gms/sqm and apply the primer on the plastered surfaces. Stage 3 : Application of 1st coat of Tarfelt LM of STP Ltd or equivalent in Piddilite/ Krishna Conchem (without dilution with water) @ 1Kg/Sqm by brush all as per manufactuer's instructions. Stage 4: Laying fyber glass cloth (weight not less than 50gram/ Sqm) over the 1st coat while the coated surface is still sticky. Stage 5: After 6 to 7 hours interval, apply second coat i.e. final coat of Tarfet LM of STP Ltd or equivalent in Piddilite/ Krishna Conchem (without Dilution with water) @ 1kg/ Sqm by brush as per manufacturer's instructions. Stage 6: Providing 10mm thick protective plaster in CM 1:3 mixed with STP No. 1 @ 250ml/50 Kg cement all as per manufacturer's instructions. Stage 7: Carryout ponding test for 48 hours to ensure water tightness of repaired sunken portion. NOTES :(i) Mode of measurement: Actual area treated (floor and adjoining walls) will be measured and paid . (ii) The above treatment shall be got executed through applicator of manufacturer and necessary authenticated documents on account of above shall also be produced by the contractor.

Dismantling steel or simillar type (Corrugated, Semi corrugated etc.) sheets in roof coverings all as specified and as directed

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified and as directed

S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified and as directed

Dismantling wrought iron or mild steel work of any dscription not otherwise provided for complete all as specified and as directed.

S & F MS steel work in tubular trusses and tubular posts and square tubes including special shaped washers etc., complete using butt welded tubes confirming to IS 1161- 1979 graded St 240 all as specified and as directed

S&F rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates Fe 410 Gde E all as specified and as directed

S&F polycarbonate Hollow sheet 10mm thick of an colour having tensile strength of 60.30MPa as in roof covering/cladding to wall, fixed with self tapping screwsand including aluminium channel strip complete all as specified and as directed. (Note: Colour is approved by GE)

S&F aluminium anodised section (minimum thickness of anodising shall be 15 micron) for fixing polycarbonate multiwall hollow sheet with and including EPDM gasket as in roof covering / cladding, complete all as specified and directed (Aluminium section shall be of make Jindal/Hindalco/ Indalco) Note:- Weight of Aluminium sections as per actual or as per IS or as per manufacturer, whichever is less, shall only be considered for payment. Cost of EPDM gasket etc shall also be deemed to be included in the quoted rate.

M&L providing and injecting chemical emulsion for Post Constructional Anti-termite Treatment along external wall where the apron is nor provided using chemical emulsion at the rate of 7.5 litres per sq.m of the vertical surface of the sub-structure to a depth of 300mm including excavating channel along the wall and rodding etc. all as specified and as directed

M&L to cement concrete tiles 25 x 25 x 22 mm machine pressed as in roof, floors over and including screed bed or bedding layer of motor of 15 mm in cement motor as set and jointed in neat cement slurry and pointed with mixture of gray and white cement included preparation complete all as specified and directed

M&L for providing & injecting at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ .5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150 mm centre to centre and sealing the same all as specified and as directed. Note : A sum of Rs 38,001.00 towards sch of credit shall be deducted to arrive the contract sum

Vishal Builders

Parmatma Enterprises

M/s Hari Om Construction

PANKAJ AND BROTHERS

SRINIVASA BUILDERS