Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹7.3 CrAccepted-AOC | ₹7.3 Cr | L-1 | Accepted-AOC L1 |
Tender Value
₹7.3 Cr
EMD Value
₹14.6 L
Closing Date
16 Mar 2020, 10:30 amClosed
Chief Engineer HZ HPPWD Hamirpur
Chief Engineer HZ HPPWD Hamirpur
Upgradation of Boul Talehra Sanhal road
2020_CEHP_89998_1
HP12176
Open Tender
Civil Works - Roads
Item Rate
365 days
Bangana
SBD
24 documents required · 24 mandatory
₹5,000
Executive Engineer
₹14.6 L
22 May 2020
24 Feb 2020
16 Mar 2020
24 Feb 2020
16 Mar 2020
24 Feb 2020
Amount
Excavation in hilly area in all heights and depths and in all kind of soil ordinary rock, hard rock, chieselling , wedging out of rock(where blasting is prohibited) and their intermediate classification of soil , setting out true to the required lines, grades, width cutting and trimming of side slopes and level as shown in the drawing and as directed by Engineer-in-charge at site according to the MORD technical specification clause 302, 1602,1603 and sorting out useful materials and stacking the same in all leads and lifts on acquired width of road and transportation for filling in road ways, camber ,embankments for grade improvements and disposal of all surplus(usefull or if any usefull) material to required width of the road or to approved dumping sites through all modes of transportation including head load or animal transport or mechanical means along with its leveling, fine dressing and carriage of machineries, materials ,tool and labour if required. Any loss to the public/private property during the course to execution shall be the absolute responsibility of the contractor which shall have to be duly compensated by him in all the cases as per the direction of engineer-in-charge including carriage of material with in all leads and lifts. All useful / if any un-useful material such as stone, shingle, sand and slates etecetra shall be the property of contractor. A recovery of 2169.26 cum. (Two Thousand One Hundred Sixty Nine And Twenty Six Cubic metre) stone to be obtained from excavation cutting at the rate of Rs.300.00 (Rupees Three hundred seventy ) per cubic metre shall be effected on prorata bases in each running bill for this item. The rate includes sale tax octori, royality,malkhana ,toll tax,labour cess or other taxes imposed by the Government..The rate are excluding GST.
Construction of embankement with approved material obtained at site from roadway cutting and excavation from drain and foundation of other structures graded and compacted to meet requirement of Table 300.1 and 300.2 with a lead upto 1000 metre as per Technical Specification Clause 301 The rate includes sale tax octori, royality,malkhana ,toll tax,labour cess or other taxes imposed by the Government.. The rate are excluding GST.
Construction of sub grade and earthen shoulder with approved materials obtained from borrow pits, with in all lifts and leads ,transporting to site, spreading grading to required slope and compacted to meet requirement of table 300.2 with lead upto 1000 metre (one thousand metre) as per technical specification clause 303 including carriage of materials within all leads and lifts and other incidential . The rate includes sale tax octori, royality,malkhana ,toll tax,labour cess or other taxes imposed by the Government.. The rate are excluding GST.
Earth work in excavation for all type of road structure and in all type of on classification of soil comprising of ordinary soil, ordinary rock, hard rock chiseling /wedging out rocks ( Where blasting is prohibited) such as retaining walls, breast walls, culverts, drains and parapets etcetera as per drawings and technical specification clause 305 and as per direction of the Engineer- In – Charge including setting out construction of shoring and bracing , removal of stumps and other deleterious materials and disposal of materials upto any lead and upto any lift including dressing of sides and bottom and back filling in trenches with excavated suitable approved material to the original surface in layers not exceeding 150mm ( one hundred fifty millimetres) compacted thickness including shoring and strutting and pumping and bailing out water (surface and sub soil water ) upto any depth and any quantium of water including cleaning of slush which may arrise out during dewatering as per direction of Engineer-in-Charge. including carriage of materials within all leads and lifts and other incidential . The rate includes sale tax octori, royality,malkhana ,toll tax,labour cess or other taxes imposed by the Government.. The rate are excluding GST.
Providing and laying cement concrete 1:4:8 (One cement:four sand: eight graded stone aggregate) and curing complete including the cost of form work plain / reinforced concrete in retaining walls, breast walls as per drawing and HPPWD. MORD technical specification clouse 802,803,804 and 1200 including carriage of materials within all leads and lifts and other incidential . The rate includes sale tax octori, royality,malkhana ,toll tax,labour cess or other taxes imposed by the Government.. The rate are excluding GST.
Providing and laying of boulder apron laid in wire crates with 4 mm dia GI wire conforming to IS:280 and IS:4826 in 100 mm x 100 mm mesh (woven diagonally) including 10 per cent extra for laps and joints laid with stone boulders weighing not less than 25 kg each as per drawing and technical specifications Clause 1301.The rate includes sale tax octori, royality,malkhana ,toll tax,labour cess or other taxes imposed by the Government.. The rate are excluding GST.
Back filling behind abutment, wing wall and return wall complete as per drawings and technical specification clause 1204 including carriage of material within all leads and lifts and other incidentials. The rate includes sale tax octori, royality,malkhana ,toll tax,labour cess or other taxes imposed by the Government.The rate are excluding GST.
Providing weepholes in brick masonry/ stone masonry /plain reinforced concrete abutment, wing wall, return wall with 100mm(hundred milimetre)dia PVC pipe extending through the full width of the structures with slope of 1(v):20(H)(one vertical twenty horizontal) towards drawing face complete as per drawings and MORD technical specification clause 614,709,1204 including carriage of material within all leads and lifts and other incidential. The rate includes sale tax octori, royality,malkhana ,toll tax,labour cess or other taxes imposed by the Government.. The rate are excluding GST.
Scarifying the existing bituminous road surfacae to a depth of 50mm (fifty millimetre ) by mechanical means and disposal of scarified material at approved dumping sites as per the directions of the Engineer-in -charge side within all leads and lifts including carriage of material within all leads and lifts .The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax or other taxes imposed by the Government.The rate are excluding GST.
Construction of Gravel/soil aggregate base/sub base nominal maximum size grading 80mm(eighty millimetre) as per table 2.3 of IRC SP 77-2008 spreading in uniform layers with Tractor mount appropriate grading arrangements on prepared surface, mixing by mix place method at OMC with Tractor mount appropriate rotavator attachment and compaction with three wheel 80-100KN static roller capacity to achieve the desired density, complete as per specification contained in Para 2.2, 3.6 and 3.7 of IRC SP-77-2008By using Fresh material) as per MORD technical specificatioin clouse 402 and as per direction of Engineer-in-charge including carriage of materials within all leads and lifts . The rate includes sale tax octori, royality,malkhana ,toll tax,labour cess or other taxes imposed by the Government.. The rate are excluding GST.
Providing , laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mixer (pug mill) carriage of mixed material by tipper to site, laying in uniform layers in sub-base/ base course on a well prepared sub-base and compacting with smooth wheel roller of 80 to 100KN (Eighty to hundred kilo newton) capacity to achieve the desired density including lighting barricading and maintenance of diversion etc. as per tables 400.11 & 400.12 MORD technical specification clause 406. including carriage of material within all leads and lifts and other incidentials.The rate includes sale tax octori, royality,malkhana ,toll tax,labour cess or other taxes imposed by the Government.. The rate are excluding GST.
Providing and applying evenly a primer coat with bitumen emulsion (SS-1)on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.85 kg (zero decimal eght five kilogram) per square metre using mechanical means as per MORD technical specification clause 502 and as per direction of Engineer-in-charge including carriage of materials within all leads and lifts. and other incidentals.The rate includes sale tax octori, royality,malkhana ,toll tax,labour cess or other taxes imposed by the Government.. The rate are excluding GST.
Providing and applying tack coat with bitumen emulsion (RS-I) using emulsion distributor at the rate of 0.275 kg.per sqm(Zero decimal two seven five kilogram)per square metre.on the prepared granular surfaces treated with primer and cleaned with Hydraulic broom as per MORD technical specification .clause 503 including carriage of materials within all leads and lifts and other incidential. The rate includes sale tax octori, royality,malkhana ,toll tax,labour cess or other taxes imposed by the Government.. The rate are excluding GST.
Providing and laying 50mm(fifty millimetre) thick bituminous macadam with(VG-30) and with 100-120 TPH ( one hundred dash one hundred twenty ) batch type HMP producing an average output of 75(seventy five ) tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder(VG-30) @ 3.3%(three point three percent) by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORD specification clause No. 504 complete in all respects. including carriage of material within all leads and lifts and other incidentials.The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax or other taxes imposed by the Government.The rate are excluding GST.
Providing and laying semi dense bituminous concrete 25mm (twenty five millimetre) thick with 9.5mm ( nine point five millimetre) nominal minimum aggregate size with 100-120 TPH ( one hundred to one hundred twenty tonne per Hour) (Hot Mix Plant) producing an average output of 75 (seventy five) tonnes per hour premixed with bituminous binder VG-30 @ 4.5% (Four point five per cent) minimum agrregate grading as per table 500.15 and Filler @ 2% ( two per cent) of weight of aggregates as per clause No. 509.2.4.2 design mix as per clause 509. duly approved by Engineer-in-Charge as per clause 509.4.3.2, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade,camber, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRD 2014 specification clause No. 509 complete in all respects The Hot Mix Plant should be situated with in the distance of 30Km (thirty kilometre) from work site. including carriage of material within all leads and lifts and other incidentials.The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax or other taxes imposed by the Government.The rate are excluding GST.
Construction of un-reinforced, dowel jointed at expansion and construction joint only, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS:383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, dowel bars, near approaches to bridge/culvert and construction joints, admixtures as approved, curing of concrete slabs for 14-days, using curing compound (where specified) and water finishing to lines and grade as per drawing and Technical Specification Clause 1501.and as per the direction of the Engineer-in- charge ,including carriage of material within all leads and lifts and other incidential. The rate includes sale tax octori, royality,malkhana ,toll tax,labour cess or other taxes imposed by the Government.The rate are excluding GST.
Providing and Laying of Interlocking Concrete Block Pavements having thickness 80 mm M-40 Grade of Concrete make NTC IS:15658 including border or kerb block ready or coloured over subbase of concrete with 30mm (thirty milimeter) average thickness and sand bedding laid over and jointed with neat cement slurry mixed with pigment to match the shade of block including curing, rubbing and polishing complete as per drawings and Technical Specification Clause 1504.as per the direction of the Engineer-in- charge ,including carriage of material within all leads and lifts and other incidential. The rate includes sale tax octori, royality,malkhana ,toll tax,labour cess or other taxes imposed by the Government.The rate are excluding GST.
Providing and laying mechanically mixed and vibrated concrete for reinforced cement concrete in superstructure upto all heights for deck slab or all type structure complete of reinforced cement concrete standard concrete design mix of grade M-25 (M-twenty five) Design mix with cement contents not less than 300kg.(Three hundred kilogram) per cubic metre including curing complete in all heights complete as required at site which may arise for all heights/ depths including the cost of form work with steel plates as per drawings and MORD technical specification Clause 800, 1401and as per the direction of the Engineer-in- charge ,including carriage of material within all leads and lifts and other incidentials. The rate includes sale tax octori, royality,malkhana ,toll tax,labour cess or other taxes imposed by the Government..
Supplying fitting and placing HYSD (Fe-415) bar in reinforcement in substructure complete as per drawing and technical specification clauses—1001, 1004 and 1206 including cutting, bending binding and placing in position complete in all respect including cost of binding wire in all heights including carriage of material within all leads and lifts and other incidentials. The rate includes sale tax octori, royality,malkhana ,toll tax,labour cess or other taxes imposed by the Government..
Supplying fitting and placing HYSD(Fe-500) bar in reinforcement in superstructure complete as per drawing and technical specification clause—1001, 1004 and 1401 including cutting, bending binding and placing in position complete in all respect including cost of binding wire in all heights including carriage of material within all leads and lifts and other incidentials. The rate includes sale tax octori, royality,malkhana ,toll tax,,labour cess or other taxes imposed by the Government.. The rate are excluding GST.
Providing and laying Parapet with PCC M-10 Design mix as per drawing & technical specifications clauses 800 including carriage of material within all leads and lifts and other incidentials. The rate includes sale tax octori, royality,malkhana ,toll tax,labour cess or other taxes imposed by the Government.. The rate are excluding GST.
Providing and laying mechanically mixed and vibrated concrete for plain/ reinforced concrete in open foundation/ for all type structure complete of plain cement concrete grade M-10 (M-Ten) Design mix under water and curing complete including pumping or bailing out water,dewatering removal of slush as required at site which may arise at the time of laying under water or ground complete for all heights/ depths including the cost of form work as per drawings and MORD technical specification Clause 802.803.1202 and 1203 as per the direction of the Engineer-in- charge ,including carriage of material within all leads and lifts and other incidential. The rate includes sale tax octori, royality,malkhana ,toll tax,labour cess or other taxes imposed by the Government.. The rate are excluding GST.
Providing and erecting a "W" metal beam crash barrier comprising of 3 mm thick corrugated sheet metal beam rail, 70 cm above road/ground level, fixed on ISMC series channel vertical post, 150 x 75 x 5 mm spaced 2 m centre to centre, 1.8 m high, 1.1 m below ground/road level, all steel parts and fitments to be galvanised by hot dip process, all fittings to conform to IS:1367 and IS:1364, metal beam rail to be fixed on the vertical post with a spacer of channel section 150 x 75 x 5 mm, 330 mm long complete as per MORTH specification clouse 811.including carriage of material within all leads and lifts and other incidentials. The rate includes sale tax octori, royality,malkhana ,toll tax,labour cess or other taxes imposed by the Government.. The rate are excluding GST.
Providing and laying mechanically mixed and vibrated concrete for plain/ reinforced cement concrete in substructure upto all heights of culverts or all type of structure complete of plain cement concrete standard concrete design mix of grade M-15 (M-fifteen) Design mix cement contents not to be less than 240 kg.(two hundred forty kilogram per cubic metre) in or under water and curing complete including pumping or bailing out water,dewatering removal of slush as required at site which may arise at the time of laying under water or ground complete for all heights/ depths including the cost of form work as per drawings and MORD technical specification Clause 802.804,805,806,807,1202 and 1204 as per the direction of the Engineer-in- charge ,including carriage of material within all leads and lifts and other incidentials. The rate includes sale tax octori, royality,malkhana ,toll tax,labour cess or other taxes imposed by the Government. The rate are excluding GST.
Providing and laying mechanically mixed and vibrated concrete for plain/ reinforced concrete in Substructure upto all heights for all type structure complete with cement concrete standard concrete design mix of grade M-20 (M-twenty) cement contents not less than 300kg.(three hundred kilogram) per cubic metre in or under water and curing complete including pumping or bailing out water,dewatering removal of slush as required at site which may arise at the time of laying under water or ground complete for all heights/ depths including the cost of form work as per drawings and MORD technical specification Clause 802.803,1202 and 1203 as per the direction of the Engineer-in- charge ,including carriage of material within all leads and lifts and other incidential. The rate includes sale tax octori, royality,malkhana ,toll tax,labour cess or other taxes imposed by the Government.The rate are excluding GST.
Providing and laying cement concrete wearing course M30 grade including reinforcement complete as per drawings and Technical Specification Clauses 800, 1206.3 as per the direction of the Engineer-in- charge ,including carriage of material within all leads and lifts and other incidential. The rate includes sale tax octori, royality,malkhana ,toll tax,labour cess or other taxes imposed by the Government.The rate are excluding GST.
Providing and laying ( to level or slope) 900mm (nine hundred millimeter ) diametre reinforced cement concrete heavy duty non pressure pipes IS Class NP-3 for culverts on first class bedding of granular material in single row including fixing collar with cement mortar 1 : 2 ( One cement : two sand) but excluding the cost of excavation, protection works, back filling, concrete and masonry work in head walls and parapets as per drawing and M.O.R.D. technical specifications clause 1101 and as per direction of Engineer – in- Charge including carriage of materials within all leads and lifts and other incidentals . The rate includes octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.The rate are excluding GST.
Providing and fixing of typical PMGSY informatory sign board with Logo as per MORD specifications and drawing. Three MS Plates of 1.6 mm thick, top and middle plate duly welded with MS flat iron 25mm x 5m size on back on edges. The lower plate will be welded with MS angle iron frame of 25mm x 25mm x 5mm. The angle iron frame of the lower most plate and flat iron frame of middle plate will be welded to 2 nos. 75mm x 75 mm of 12 SWG sheet tubes posts duly embedded in cement concrete M-15 grade blocks of 450mm x 450mm x 600mm, 600mm below ground level. The top most diamond plate will be welded to middle plate by 47mm x 47mm of 12 SWG steel plate tube. All M.S. will be stove enameled on both sides. Lettering and printing arrows, border etc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour. All sections of framed posts and steel tube will be painted with primer and two coats of epoxy paint as per drawing Clause 1701 and Annexure 1700.1 (Providing and Fixing 'Logo' of PMGSY Project (Title Informatory Board).as per the direction of the Engineer-in- charge ,including carriage of material within all leads and lifts and other incidential. The rate includes sale tax octori, royality,malkhana ,toll tax,labour cess or other taxes imposed by the Government..The rate are excluding GST.
Reinforced cement concrete mechanicallly mixedand vibrated, M-15 grade Design mix minimum Cement Concrete 240kg (Two hundred forty kilogram) Per cubic meter, 5th kilometre stone/ local stone of standard design as per IRC : 8 Fixing in position including painting and printing etcetera as per drawing and M.O.R.D. technical specification rural roads Clause 1703 (5th kilometre stone, precast). as per the direction of the Engineer-in- charge ,including carriage of material within all leads and lifts and other incidential. The rate includes sale tax octori, royality,malkhana ,toll tax,labour cess or other taxes imposed by the Government..The rate are excluding GST.
Reinforced cement concrete mechanicallly mixedand vibrated, M-15 grade Design mix minimum Cement Concrete 240kg (Two hundred forty kilogram) Per cubic meter 1: 2 ½ : 5 ( one cement : two & half sand : five graded crushed stone aggregate 20mm nominal size, kilometre stone/ local stone of standard design as per IRC : 8 Fixing in position including painting and printing etcetera as per drawing and M.O.R.D. technical specification rural roads Clause 1703 (ordinary kilometre stone, precast). as per the direction of the Engineer-in- charge ,including carriage of material within all leads and lifts and other incidential. The rate includes sale tax octori, royality,malkhana ,toll tax,labour cess or other taxes imposed by the Government..The rate are excluding GST.
Reinforced cement concrete mechanicallly mixed and vibrated, M-15 grade Design mix minimum Cement Concrete 240kg (Two hundred forty kilogram) Per cubic meter 1: 2 ½ : 5 ( one cement : two & half sand : five graded crushed stone aggregate 20mm ( twenty millimetre) nominal size, in kilometre stone/ local stone of standard design as per IRC : 8 Fixing in position including painting and printing etcetera as per drawing and M.O.R.D. technical specification rural roads Clause 1703 [ 200 metres ( two hundred metres) stone, precast]. including carriage of material within all leads and lifts and other incidential. The rate includes sale tax octori, royality,malkhana ,toll tax,labour cess or other taxes imposed by the Government..The rate are excluding GST.
Reinforced cement concrete M15 grade Design mix minimum Cement Concrete 240kg (Two hundred forty kilogram) Per cubic meter boundary pillars/local stone of standard design as per IRC:25, fixed in position including finishing and lettering but excluding painting as per drawing and Technical Specification Clause 1704 (Boundary Pillars)including carriage of material within all leads and lifts and other incidential. The rate includes sale tax octori, royality,malkhana ,toll tax,labour cess or other taxes imposed by the Government.The rate are excluding GST.
Providing and fixing of retro-reflectorised traffic signs 900x900x900mm(nine hundred into nine hundred into nine hundred millimetre) traingular cautionarty, mandatory and informatory sign as per IRC: 67 made of encapsulated lens type reflective sheeting vide clause 1701.2.3 fixed over aluminium sheeting, 1.5mm thick supported on a mild steel angle iron post 75mmx75mmx6mm(seventy five millimetre into seventy five millimetre into six millimetre) firmly fixed to the ground by means of properly designed foundation with M-15 grade cement concrete 450x450x600mm(four hundred fifty into four hundred fifty into six hundred millimetre)600mm below ground level as per drawings and MORD technical specification Clause 1701 as per the direction of the Engineer-in- charge ,including carriage of material within all leads and lifts and other incidential. The rate includes sale tax octori, royality,malkhana ,toll tax,labour cess or other taxes imposed by the Government.. The rate are excluding GST.
Providing and erecting direction and place identification retro-reflectorised sign with size 900x600mm(nine hundred into six hundred millimetre)as per IRC:67 made of encapsulated lens type reflectiive sheeting vide clause 1701, fixed over aluminium sheeting, 2mm thick with area exceeding 0.9 sqm.supported on mild steel angle iron posts 75mmx75mmx6mm(seventy five into seventy five into six millimetre) 2numbers firmly fixed to the ground by means of properly designed foundation with M-15 grade cement concrete 450mmx450mmx600mm,600mm below ground level as per approved drawing and technical specification clause 1701 as per the direction of the Engineer-in- charge ,including carriage of material within all leads and lifts and other incidential. The rate includes sale tax octori, royality,malkhana ,toll tax,labour cess or other taxes imposed by the Government..The rate are excluding GST.
Providing and erecting direction and place identification retro-reflectorised sign with size 1200x900mm(One thousand two hundred into nine hundred millimetre))as per IRC:67 made of encapsulated lens type reflectiive sheeting vide clause 1701, fixed over aluminium sheeting, 2mm thick with area exceeding 0.9 sqm.supported on mild steel anmgle iron posts 75mmx75mmx6mm(seventy five into seventy five into six millimetre) 2numbers firmly fixed to the ground by means of properly designed foundation with M-15 grade cement concrete 450mmx450mmx600mm,600mm below ground level as per approved drawing and technical specification clause 1701 as per the direction of the Engineer-in- charge ,including carriage of material within all leads and lifts and other incidential. The rate includes sale tax octori, royality,malkhana ,toll tax,labour cess or other taxes imposed by the Government..
Providing and fixing of typical PMGSY Logo as per MORD specifications and drawing. All M.S. will be stove enameled on both sides. Lettering and printing arrows, border etc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour. All sections of framed posts and steel tube will be painted with primer and two coats of epoxy paint as per drawing Clause 1701 and Annexure 1700.1,{ Providing and Fixing 'Logo' of PMGSY Project double sided}including carriage of material within all leads and lifts and other incidential. The rate includes sale tax octori, royality,malkhana ,toll tax,labour cess or other taxes imposed by the Government.The rate are excluding GST.
Providing and fixing of typical PMGSY Citizen informatory sign board as per MORD specifications and drawing. Two MS Plates of 1.6 mm thick duly welded with MS angle iron frame of 25mm x 25mm x 3mm. The angle iron frame will be welded to 2 nos. 75mm x 75 mm of 12 SWG sheet tubes posts duly embedded in cement concrete M-15 grade blocks of 600mm x 600mm x 750mm, 600mm below ground level. All M.S. will be stove enameled on both sides. Lettering and printing arrows, border etc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour. All sections of framed posts and steel tube will be painted with primer and two coats of epoxy paint as per drawing Clause 1701 and Annexure 1700.1 Providing and Fixing Citizen Informatory Board of PMGSY Project.including carriage of material within all leads and lifts and other incidential. The rate includes sale tax octori, royality,malkhana ,toll tax,,labour cess or other taxes imposed by the Government.The rate are excluding GST.
Providing and laying of hot applied thermoplastic compound 2.5 mm (two point five millimetre )thick including reflectorising glass beads @ 250 gms ( at the rate of two hundred fifty gram per square metre )per sqm area, thickness of 2.5 mm(two point five millimetre ) is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes including carriage of material within all leads and lifts .The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax or other taxes imposed by the Government.The rate are excluding GST.
Providing and fixing cat eye make)(3M) of size 100x20mm made of heavy duty body shall be moulded dual shank ASA /Acyclic styrene acyloretrite ) or HIP/High impact polystyrene) or ABS having electronically welded micro prismatic lens with abrasion resistant coating as approved by Engineer-in-charge. The road stud shall support a load of 13635 by tested in accordance with ASTM D4280.The slope of retro reflective surface shall be 35+/-5 degrees to base. The reflective panels on both side with at least 12cm. of each area side. The luminance intensity should be as per the specification ASTM as recommended in BS-873 part 4:1973 The stud shall be fixed to the road surface using adhesive conforming to IS as per procedure recommeded by the manufature complete.including carriage of materail within all leads and lifts .The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax or other taxes imposed by the Government.The rate are excluding GST.
Painting lines, dashes, arrows, etc on roads with Cold plastic Road Marking Paint conforming to IRC:35-1997, Cl.5.4.2 on bituminous/concrete surface including cleaning the surface of all dirt, dust and other foreign matter, demarcattion at site and traffic control as per drawing and Technical Specification Clause 1702.including carriage of materail within all leads and lifts .The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax or other taxes imposed by the Government. The rate are excluding GST.
Providing and fixing of typical PMGSY Maintenance sign board with Logo as per MORD specifications 2014 and drawing. Three MS Plates of 1.6 mm thick (One point six millimeter), top and middle plate duly welded with MS flat iron 25mm x 5m (twenty five into five millimeter) size on back on edges. The lower plate will be welded with MS angle iron frame of 25mm x 25mm x 5mm. The angle iron frame of the lower most plate and flat iron frame of middle plate will be welded to 2 nos. 75mm x 75 mm of 12 SWG sheet tubes posts duly embedded in cement concrete M-15 grade blocks of 450mm x 450mm x 600mm, 600mm below ground level. The top most diamond plate will be welded to middle plate by 47mm x 47mm of 12 SWG steel plate tube. All M.S. will be stove enameled on both sides. Lettering and printing arrows, border etc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour. All sections of framed posts and steel tube will be painted with primer and two coats of epoxy paint as per drawing and MORD technical specification 1701 .The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax or other taxes imposed by the Government.The rate are excluding GST.
Planting containerized tree plants including pitting transplanting, commposing and mulching on slope-30-45 (Thirty to fourty five) pit size, 60cm dia metre x 60cm depth backfill with composit @ 0.0212 cum pit mixed with original size, cost of plants, FYM shall be paid separately, including entire carriage of materials, within all leads lift and other incidental as per directions of Engineer-in-Charge. The rates are excluding of goods service tax but including labour cess, other levies/taxes, duties/royalities, cess. The toll tax, of local bodies and authorities that the contractor will have to pay for the performance of this contractor. labour cess or other taxes of local bodies and authorities that the Contractor will have to pay for the perfomance of this contract.
Providing containerized of appropriate species (size of plants should not be less than 60cm) including transportation from the nursery site to the site of work including entire carriage of materials within all leads lift and other incidental as per directions of Engineer-in-Charge. The rates are excluding of goods service tax but including labour cess, other levies/taxes, duties/royalities, cess. The toll tax, of local bodies and authorities that the contractor will have to pay for the performance of this contractor. labour cess or other taxes of local bodies and authorities that the Contractor will have to pay for the perfomance of this contract.
Supplying & stacking of well decayed farm yard manure at the site of work as per instruction dby the Engineer-in-Charge. The farm yard manure shall be free from earth, stone, brick bats and other extraneous stuff. The stack of farm yard manure should be 50cm in height having volume not less than 3.00cum. The volume of stacks shall be reduced by 8% for looseness to arrive at the net quality for payment including entire carriage of materials, within all leads lift and other incidental as per directions of Engineer-in-Charge. The rates are excluding of goods service tax but including labour cess, other levies/taxes, duties/royalities, cess. The toll tax, of local bodies and authorities that the contractor will have to pay for the performance of this contractor. labour cess or other taxes of local bodies and authorities that the Contractor will have to pay for the perfomance of this contract.
Bamboo tree guard 1.80 metre height with 30cm dia with 4 no,s vertical strips length 1.80 metre, brath 30mm, thickness 5mm further veaving with different smaller size of vertical and circular strip. The waved portion should be 125cm having 3 rings at the top bottom and middle portion. The first ring should be 55cm, above the 4 thick vertical strips including strengthening with barbed wire including entire carriage of materials, within all leads lift and other incidental as per directions of Engineer-in-Charge. The rates are excluding of goods service tax but including labour cess, other levies/taxes, duties/royalities, cess. The toll tax, of local bodies and authorities that the contractor will have to pay for the performance of this contractor. labour cess or other taxes of local bodies and authorities that the Contractor will have to pay for the perfomance of this contract.
Routine Maintenance after completion of construction work as per items and condition of bid document that is 4 (iv) of contract data to general condition of contract and technical specifications of Ministry of Rural Development for rural roads January 2014 (First Revision) for rural roads including haulage/ carriage of all labour equipment and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction of the Engineer-in-Charge. The rates are inclusive of octroi, royality, Malkana, toll tax, labour cess or other taxes imposed by the Government, but exclusive of goods service tax shall be paid separately. AMC for 1st Year
AMC for 2nd Year
AMC for 3rdYear
AMC for 4th Year
AMC for 5th Year
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.PDF
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .