PROVN OF KLP ACCN AT PRITHI MIL STATION

Amount

Total amount of Sch 'A' Sec-I (Builidng/Structure Works)

Total amount of Sch 'A' Sec II (Excavation and Earth Works)

Total amount of Sch 'A' Sec III (INTERNAL ELECTRIFICATION WORKS)

Total amount of Sch 'A' Sec IV (INTERNAL WATER SUPPLY WORKS)

Total amount of Sch 'A' Sec V (SEWAGE DISPOSAL WORKS)

Total amount of Sch 'A' Sec VI (AREA DRAINAGE WORKS)

Total amount of Sch 'A' Sec VII (ROAD/PATH/CULVERT WORKS)

Total amount of Sch 'A' Sec VIII (SECURITY WALL/FENCING WORKS)

Total amount of Sch 'A' Sec IX ( HARDSTANDING, PARADE GROUND( SIZE 73X73MTR) BADMINTON COURT(SIZE 5.18X13.41 MTR) AND BASKET BALL COURT(SIZE15X28 MTR) WORKS )

Total amount of Sch 'A' Sec X (RETAINING WALL, PROTECTIVE WORK AND STONE MASONRY TOE WALL WORKS)

Total amount of Sch 'A' Sec XI (LIBERTY PEDDOCK)

Total amount of Sch 'A' Sec XII (EXTERNAL WATER SUPPLY & AND SOLAR WATER HEATER WORKS)

Total amount of Sch 'A' Sec XIII (EXTERNAL ELECTRIC SUPPLY WORKS)

Total amount of Sch 'A' Sec XIV (DISMANTLING/DEMOLITION WORKS)

Schedule 'A'Section-XVI (Misc Items of Works) Note : This schedule is not pre-priced by MES and the pre-priced rate indicated as "Rs 0.00" under Col. 5 siginifies this fact only.

INTERNAL ELECTRIC SUPPLY WORKS

Item No. 1: Point wiring using approved colour coding as per IS, with stranded copper conductor 1.5 Sq. mm (nominal area), single core, flame retardant low smoke (FRLS), PVC insulated and unsheathed cable 1100 volts grade, ISI 694 marked TEC and FIA approved in and including heavy duty PVC concealed conduit and its fittings, ISI marked, PVC junction boxes, mild steel sunken boxes (Terminal boxes) two coats of anti corrossive paint over a coat of red oxide primer covered with 3mm thick plastic laminated sheet including flame retardant low smoke (FRLS) PVC insulated unsheathed stranded copper conductor 1.5 Sq. mm (nominal area) single core cable as earth continuity conductor to common earth and connected to earth dolly complete all as specified, for the following: -

(a) One light point controlled by one switch/ one fan point controlled by one switch & fan regulator.

(b) One Socket outlet three pin, 5 Amps, on independent board.

(c) One light point controlled by two way switches 5 Amps.

(d) One Socket outlet three pin, 5 Amps, on the same board.

Item No 2: Point wiring using approved colour coding as per IS, with stranded copper conductor 2.5 Sq. mm (nominal area), single core, flame retardant low smoke (FRLS), PVC insulated and unsheathed cable 1100 volts grade, ISI 694 marked TEC and FIA approved in and including heavy duty PVC concealed conduit and its fittings, ISI marked, PVC junction boxes, mild steel sunken boxes (Terminal boxes) two coats of anti corrossive paint over a coat of red oxide primer covered with 3mm thick plastic laminated sheet including flame retardant low smoke (FRLS) PVC insulated unsheathed stranded copper conductor 2.5 Sq. mm (nominal area) single core cable as earth continuity conductor to common earth and connected to earth dolly for one socket outlet 15 Amp on Independent board complete all as specified.

Item No 3: Sheet metal enclosures for DB TPN 8 way, powder coated, IP-43 protection with 200 Amps rated bus bar, double door, mounted flush on wall complete all as specified and as directed.

Item No 4: Sheet metal enclosures for DB, SPN, 12 way, powder coated, IP-43 protection with 200 Amps rated bus bar, double door, mounted flush on wall complete all as specified and as directed.

Item No 5: Sheet metal enclosures for DB, SPN, 8 way, powder coated, IP-43 protection with 200 Amps rated bus bar, double door, mounted flush on wall complete all as specified and as directed.

Item No 6: Sheet metal enclosures for DB, SPN, 6 way, powder coated, IP-43 protection with 200 Amps rated bus bar, double door, mounted flush on wall complete all as specified and as directed.

Item No 7: Sheet metal enclosures for DB, SPN, 4 way, powder coated, IP-43 protection with 200 Amps rated bus bar, double door, mounted flush on wall complete all as specified and as directed.

Item No 8: Sheet metal enclosures for DB, SPN, 8 way, powder coated, IP-43 protection with 200 Amps rated bus bar, single door, mounted flush on wall complete all as specified and as directed.

Item No. 9: MCB, Single Pole, 220 volts, 50 Hz, 6 to 32 Amps of breaking capacity not less than 10 KA, 'B' Curve of cat 'A' complete all as specifed & directed.

Item No. 10: MCB, SPN, 220 volts, 50 Hz, 6 to 32 Amps of breaking capacity not less than 10 KA, ''B' Curve of cat 'A' complete all as specifed & directed.

Item No. 11: MCB, SPN, 220 volts, 50 Hz, 40 Amps of breaking capacity not less than 10 KA, ''B' Curve of cat 'A' complete all as specifed & directed.

Item No. 12: MCB, SPN, 220 volts, 50 Hz, 50 Amps of breaking capacity not less than 10 KA, 'B' Curve of cat 'A' complete all as specifed & directed.

Item No. 13: MCB, SPN, 220 volts, 50 Hz, 63 Amps of breaking capacity not less than 10 KA, 'B' Curve of cat 'A' complete all as specifed & directed.

Item No. 14: MCCB, 80 Amps 415volt, 4pole, breaking capacity not less than 16 KA, complete all as specifed & directed.

Item No. 15 : Exhaust fans AC single phase 230/240V of size 300mm sweep 1400 RPM, with louvers and shutter complete all as specified and as directed.

Item No. 16 : Ceiling fans complete with accessories AC single phase 230/240V of size 1200mm sweep BEE 5 star rated complete all as specified and as directed.

ITEM No 17: LED tube light fitting 1 x18/20W LED 230V energy efficient batten fitting, with driver etc complete with all accessories internally prewired and including connecting up with twin core twisted flexible copper conductor including 18/20w LED tube rod complete all as specified and directed. Make: C&S Nakshatra Series Cat Part NO. LTTB4F20WLED/W or equivalent make given in Appx 'B'

ITEM No 18 : LED bulb 7 watt, 230 volt AC, 50 Hz, Retrofit, B22 base for lamp holder complete all as directed. Make: C&S Electric Cat Part No. LTHPLEDLAMP7W/B22 or equivalent make given in Appx 'B'

ITEM No 19 : LED recessed 2'x2' luminaire made out of powder coated metallic CRCA housing with high efficiency opal diffuser, 36watt system wattage including driver with all accessories prewired and connecting up with three core flexible copper conductor cable of size 1.0 sqmm complete all as specified and as directed. Make : C&S Cygnus Series Cat Part No. LTCRSLM36WATT2x2 or equivalent makes as mentioned in Appendix 'B'.

ITEM No 20 : LED recessed 2'x2' luminaire made out of powder coated metallic CRCA housing with high efficiency opal diffuser, 45watt system wattage including driver with all accessories prewired and connecting up with three core flexible copper conductor cable of size 1.0 sqmm complete all as specified and as directed. Make : C&S Cygnus Series Cat Part No. LTCRSLM45WATT2x2 or equivalent makes as mentioned in Appendix 'B'.

ITEM No 21 : LED Highbay 75w with pressure die cast aluminium housing tempered glass high beam optics, IP-65 protection including driver with all accessories prewired and connecting up with three core flexible copper conductor cable of size 1.0 sqmm complete all as specified and as directed. Make : C&S Corvus Series Cat Part No. LTEHB75WHPLED/LS or equivalent makes as mentioned in Appendix 'B'.

ITEM No 22 : Surface mounted wall mirror LED light compact & sturdy 9 Watt LED decorative fixture with anti glare polycarbonate diffuser, multi purpose lighting solution & applications, all accessories & fixtures, internally prewired and connecting by providing copper flexible wire 23/0076mm twin core upto fitting, complete in all respects. Make: Havells Cat Part No LHESABP6IN1W009 / HPL Candila Cat Part No. HLPLEDCAD09CW or equivalent make given in Appx 'B' all as specified and as directed.

ITEM No 23 : Surface mounted LED square downlighter compact & study 20 Watt 6500K LED with integrated electronic driver with all accessories & fixtures, internally prewired and connectiong by providing copper flexible wire 23/0076mm twin core upto fitting, complete in all respects, Make of fitting: Phillips Candila Cat Part No SM200C LED16S 6500 PSU OD WH or equivalent make given in Appx 'B' all as specified and as directed.

ITEM No 24 : Sub-main wiring with approved colour coding as per IS with 3 runs of single core PVC insulated FRLS cable with multi stranded copper conductor of size 4.00Sqmm nominal area for main and earth wire in and including concealed heavy duty PVC conduit of suitable size complete all as specified and as directed. Note: One running meter each of 3 runs of 4Sqmm cables shall be measured as one RM for payment purpose only.

ITEM No 25 : Sub-main wiring with approved colour coding as per IS with 5 runs of single core PVC insulated FRLS cable with multi stranded copper conductor of size 6Sqmm nominal area for main and earth wire in and including concealed heavy duty PVC conduit of suitable size complete all as specified and as directed. Note: One running meter each of 5 runs of 6Sqmm cables shall be measured as one RM for payment purpose only.

Item No. 26: Earthing with galvanized steel earth plate electrode 600mmx600mmx6mm thick, burried directly in ground (earth pit not less than 2.25 metre deep below normal ground level) with top edge of the plate not less than 1.5 metre below normal ground level connected to GI wire 4mm dia by means of bolts, nuts check nuts and washers of galvanized iron or steel with protection pipe of GI, light grade 20mm bore, watering pipe 20mm bore of GI medium grade, earth plate surrounded by alternate layer of coal dust and common salt 15cm thick each layer all as per electrical plate No 3 of SSR Part-I and connected to earthing test point all as specified or indicated and testing on completion including funnel with wire mesh, earthing chamber with PCC (!:2:4) type B-1 using 20mm graded stone aggregate, 80mm thick precast RCC 1:1:5:3 type A-1 cover duly reinforced with XPM (Weight not less than 3 Kg/Sqmm) and frame including all excavation and earth work etc all as specified. Note: 1. Earth chamber shall be constructed at leat 1.50metre away from the top of earth electrode, the earth pit and pipe for watering shall be provided in slanting manner. 2. Cost of 7.5m length of GI earth wire & GI protection pipe included in the rate of this item. Extra length shall be measured and paid separately.

Item No. 27: Building security light pressure die cast housing with epoxy powder coated dark graphite grey colour finish , including LED lenses, IP65, 20watt complete all as directed. Make: C&S Draco Series Cat Part NO. LTESS20WLED or equivalent make as mentioned in Appendix 'B'

Item No. 27A: Exhaust fan of size 450mm with louvers and electric connection complete all as specified and directed. Make : Havells/Crompton/Bajaj.

Item No. 27B: CMRI certified LED Flameproof 1x16W/20W LED Tube light fixture IP65 protection. Make : Crompton Cat Ref no.EXTN1LT8-16/20 or equivalent. 18/20 W.

Item No. 27C: Switch flame proof rotary type with termination box in LM6, 10/16A single pole 240 V complete all as specified and directed. Make : Sudhir//Bajaj/.Crompton

ROAD, PATH & CULVERTS/HARDSTANDING

Item No:28 60mm thickness machine pressed pre-cast concrete (of M-30 grade) interlocking paver block, manufactured in an automatic plant working on vibration and simultaneous hydraulic compression from top, (with grey cement and no pigment) any shape and size confirming to IS 15658-2006 laid over and including 50mm thick cushion of coarse sand & filling the joints after laying complete all as specified and as directed.

Item No 29: 60mm thickness machine pressed pre-cast concrete (of M-30 grade) interlocking paver block, manufactured in an automatic plant working on vibration and simultaneous hydraulic compression from top, (with grey cement and pigment) any shape and size confirming to IS 15658-2006 laid over and including 50mm thick cushion of coarse sand & filling the joints after laying complete all as specified and as directed.

Item No. 30 :Delineators of size 700x100x50mm of ABS round body fixed with 100mm dia highly reflective reflector, duly UV stablized, in yellow colour complete all as specified and as directed Make: Dark Eye/Greenlite

Item No. 31: Cats eye two way reflective of size 100 x 100 x 18.5mm with PVC body with reflective panels Amber/Red/White complete all as specified and as directed. (Cat part No DA 978 of Dark Eye or equivalent in Greenlite)

Item No. 32: Readymade ABS plastic speed breakers/ bumps of size 350x250x53mm designed so dynamically and compact that it can bear maximum load on it, with two reflectors complete as per specimen approved complete all as specified and as directed. Make: Dark Eye/Greenlite

Item No. 33: Making strip, straight line, zebra crossing and stop line not less than 2 mm thick with hot applied thermoplastic road marking paint of approved brand (white or yellow) by using automatic mechanical road painting machine complete all as specified and as directed.

EXTERNAL WATER SUPPLY AND SOLAR WATER HEATER

Item No. 34: Construction of brick masonary valve pit with 3mm thick mild steel sheet cover and angle iron frame of size 40 x 40 x 6mm including provn of suitable holdfasts to hold the frame , locking arrangement and lifting handle, duly painted with two coats of synthetic enamel paint over a coat of red oxide primer and all as specfied and as shown in drawing of the following sizes:-

(a) 600x600x600mm (Internal dimension)

Item No. 35 :Sluice valve, cast iron body, having brass spindle with iron wheel at top, class PN 1.0 of size 80mm, with flanged ends, drilled suitably, complete with joints and including necessary joints by means of bolts, nuts washers and rubber gaskets, conformig to IS - 14846 complete all as specified for the following size complete all as specified and as directed.

Item No. 36 :Cutting existing 100mm bore GI tubing , in position reducing to required length, with and including inserting new tee of size 100x100x80mm etc. before laying complete all as specified and directed.

Item No. 37 : Supply, installation, testing and commissioning of solar water heater system with heat exchanger type, conforming to IS 12933 & 13129 for cold region of 400 litre/ day capacity with electric heating backup of 2 KW with and including rotational moulded polyethylene water storage tank (cylindrical vertical tank with close top) of 500 Ltr capacity, triple layer as make up water tank including 20mm dia brass float valve, SS Puf insulated hot water collecting tank of suitable capacity, hoisted and fixed in position on and including suitable steel staging as per drawing complete all as specified and directed by Engineer-in-Charge. Note:- (i) The system shall be tested on completion to ensure that 500 litres of water at 60 Degree centigrade is available in hot water tank on normal day in cold season. (ii) Normal water pipes and accessories from and including cold water make up tank upto and including hot water SS tank, all other civil & electrical works, providing electric connection with wire, MCB, conduit, steel staging as per manufacturers instructions etc as per manufacturer's instructions as required shall deemed to be included in unit rate quoted.

Item No. 38 : Supply, hoisting, installing and connecting of PVC rotational moulded polythylene water storage tank of 1000 ltrs, cylindrical vertical tank with close top conforming to IS:12701-96 including brass ball valve complete all as specified and directed by Engineer-in-Charge.

Item No. 39 : Sub-main wiring with approved colour coding as per IS with 4 runs of single core PVC insulated FRLS cable with multi strandard copper conductor of size 10.00Sqmm nominal area for main and earth wire in and including concealed heavy duty PVC conduit of suitblae size complete all as specified and as directed. Note: One running meter each of 4 runs of 10Sqmm cables shall be measured as one RM for payment purpose only.

Item No. 40 : MCB, SPN, 63 Amps of breaking capacity not less than 10 KA, 'C' series of cat 'A', in weather proof FRP box fixed with iron enclosure complete all as specifed & directed.

Item No. 41 : Water heater, vertical storage type, 25 ltr capacity BEE 5 star, including 2 Nos SS Connections complete all as specifed & directed.

TV/TELEPHONE/LAN WORKS

Item No. 42 : Rigid non-metallic PVC conduit of size 32mm dia exclusive of boxes (junction/terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks of external dia size as under , complete all as specified and directed by Engineer-in-Charge :

Item No. 43 : Rigid non-metallic PVC conduit of size 25mm dia exclusive of boxes (junction/terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks of external dia size as under , complete all as specified and directed by Engineer-in-Charge :

Item No. 44: Rigid non-metallic PVC conduit of size 20mm dia exclusive of boxes (junction/terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks of external dia size as under , complete all as specified and directed by Engineer-in-Charge :

Item No. 45 : Telephone Socket RJ-11(jack type) with shutter 1 module CML No complete all as specified and directed by Engineer-in-Charge. Make Legrand Cat Part No 573426 or equivalent makes as mentioned in Appendix 'B'.

Item No. 46: TV Socket 1 module CML No.complete all as specified and directed by Engineer-in-Charge. Make IndoAsian Cat Part No 673050 or equivalent makes as mentioned in Appendix 'B'.

Item No. 47: Supply and fixing junction boxes (1-4) way 32 mm.

Item No. 48: Supply and fixing junction boxes (1-4) way 25 mm.

Item No. 49: Supply and fixing junction boxes (1-4) way 20 mm.

SUMMER ALLIANCES WORKS

Item No. 50: Supply and install frost free refrigerator electric driven (230 volt, single phase 50Hz) Energy efficient compressor, environment-friendly, Puf insulated body, having nominal storage capacity of 310 litre double door type complete all as specified and directed by Engineer-in-Charge. Make : LG CAT part No. GL-M322RPZL or equivalent make as mentioned in Appendix 'B'. NOTE: The refrigerator shall carry minimum 5 star rating as per Bureau of Energy Efficiency (BEE) labeling programmed.

Item No. 51:Supply and install frost free refrigerator electric driven (230 volt, single phase 50Hz) Energy efficient compressor, environment-friendly, Puf insulated body, having nominal storage capacity of 275 litre double door type complete all as specified and directed by Engineer-in-Charge.Make : SAMSUNG CAT part No. RT30K3723S8 or equivalent make as mentioned in Appendix 'B'. NOTE: The refrigerator shall carry minimum 5 star rating as per Bureau of Energy Efficiency (BEE) labeling programmed.

Item No. 52: Voltage stabilizer for automatic operation single phase naturally air cooled indoor type and designed for input variation between 170 V to 250V with output voltage stabilized at 230 V with accuracy of + 2.5 % and of capacity 1 KVA complete all as specified and directed by Engineer-in-Charge.

EXTERNAL ELECTRIC SUPPLY WORKS

Item No. 53 : Earthing with galvanized steel earth plate electrode 600mmx600mmx6mm thick, burried directly in ground (earth pit not less than 2.25 metre deep below normal ground level) with top edge of the plate not less than 1.5 metre below normal ground level connected to GI wire 4mm dia as earth lead by means of bolts, nuts checknuts and washers of galvanised iron or steel with protection pipe of GI, light grade 20 mm bore; watering pipe 20mm bore of GI medium grade, earth plate surrounded by alternate layer of coal dust and common salt 15cm thick each layer all as per electrical plate No 3 of SSR Part-I and connected to earthing test point all as specified or indicated and testing on completion including funnel with wire mesh, earthing chamber with PCC (1:2:4) type B-1 using 20mm graded stone aggregate, 80mm thick precast RCC 1:1.5:3 type A-1 cover duly reinforced with XPM (Weight not less than 3 Kg/Sqmm) and frame including all excavation and earth work etc all as specified. Note: 1. Earth chamber shall be constructed at least 1.50metre away from the top of earth electrode, the earth pit and pipe for watering shall be provided in slanting manner. 2. Cost of 7.5m length of GI strip & GI protection pipe included in the rate of this item. Extra length shall be measured and paid separately.

Item No. 54: Earthing with copper earth plate electrode 600mmx600mmx3.15mm thick, burried directly in ground (earth pit not less than 2.25 metre deep below normal ground level) with top edge of the plate not less than 1.5 metre below normal ground elvel connected to copper strip 20x3mm earth strip by means of bolts, nuts check nuts and washers of galvanized iron or steel with protection pipe of GI, light grade 40mm bore, watering pipe 20mm bore of GI medium grade, earth plate surrounded by alternate layer of coal dust and common salt 15cm thick each layer all as per electrical plate No 3 of SSR Part-I and connected to earthing test point all as specified or indicated and testing on completion including funnel with wire mesh, earthing chamber with PCC (1:2:4) type B-1 using 20mm graded stone aggregate, 80mm thick precast RCC 1:1.5:3 type A-1 cover duly reinforced with XPM (Weight not less than 3 Kg/Sqmm) and frame including all excavation and earth work etc all as specified. Note: 1. Earth chamber shall be constructed at least 1.50metre away from the top of earth electrode, the earth pit and pipe for watering shall be provided in slanting manner. 2. Cost of 7.5m length of GI strip & GI protection pipe included in the rate of this item. Extra length shall be measured and paid separately.

Item No. 56 : Street light fitting 45 watt LED with lens, compact street light fitting with deep drawn MS housing complete with acrylic cover including provn of street light bracket made out of 40mm dia GI light grade tubing 1.5mtr long and bend to shape required and fixed to pole with and including clamps, nuts, bolts and washers and painting complete and provn of 2.5sqmm 3 core approx. 1.5m long flexible copper wire complete all as directed. Make: C&S code No. LTESS 18X2.5 HPLED/LS or equivalent make as mentioned in Appendix 'B'.

Item No. 57 : FRP (fibre reinforced plastic) box of size 250x200x150mm to suit the cable connections provided 4 pole connected for incoming and outgoing including support clamps fabricated from MS flat of size 26x6mm including nuts, bolts, washers elding, bending cold or hot, drilling holes for bolts in any shape or size including the two coat of aluminium paint over a coat of red oxide primer and 4 pole connector 30Amp capacity and SP MCB 6 Amp complete all as directed.

Item No. 58 : LED Post top lantern for 30 watt LED lamp complete with all accessories complete all as directed. Make : C&S code No. LTGL30-24X1HPLED or equivalent make as mentioned in Appendix 'B'.

Item No. 59: Supply and lay cable XLPE screened PVC bedded galvanised steel strip or wire armoured, electric power cable (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 120 Sqmm 3½ Core.

Item No 60: Supply and lay cable XLPE screened PVC bedded galvanised steel strip or wire armoured, electric power cable (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 70 sqmm 3½ Core.

Item No. 61: Supply and lay cable XLPE screened PVC bedded galvanised steel strip or wire armoured, electric power cable (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 50 sqmm 3½ Core.

Item No. 62: Supply and lay cable XLPE screened PVC bedded galvanised steel strip or wire armoured, electric power cable (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 35 sqmm 3½ Core.

Item No. 63: Supply and lay cable XLPE screened PVC bedded galvanised steel strip or wire armoured, electric power cable (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 sqmm 2 Core.

Item No. 64: Supply and lay cable XLPE screened PVC bedded galvanised steel strip or wire armoured, electric power cable (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 sqmm 2 Core.

Item No. 65 : Sub-main wiring with approved colour coding as per IS with 3 runs of single core PVC insulated FRLS cable with multi strandard copper conductor of size 2.50Sqmm nominal area for main and earth wire in and including steel conduit, heavy duty of suitblae size complete all as specified and as directed. Note: One running meter each of 3 runs of 2.5Sqmm cables shall be measured as one RM for payment purpose only.

Note : fpr the purpose of arriving at lumpsum amount, the amount of credit Schedule amount against Schedule 'A' Section-XV (i.e Rs. 767794.81) shall be deducted from the amount arrived

surinder kumar jindal bros

R S P Builders

m/s jupiter builders