ARC for Painting of Plant Equipment, Machinery, Steel Structures and Piping etc. for the year 2022-23

Amount

1.0 Proper surface preparation of primer/paint over towers, columns, vessels, heat exchangers, gas cylinders, steel sheets/plates used for structural purposes, chimneys, bunkers transformers, equipments, steel strutures, hand railings, toe guards, ladders, pipe lines, pipe fittings, pipe suports, cabletrays etc. at any height in the plant.

1.1- Surface preparation and one coat chlorinated rubber paint suitable for temperature upto 120oC [Refer Table-I at S. No I(a) of technical terms & conditions].

1.2- One coat high build zinc phosphate primer & two coat chlorinated rubber paint suitable for temperature upto 120oC [Refer Table-I at S. No I(b) of technical terms & conditions].

1.3- Surface preparation and one coat epoxy finish paint suitable for temperature upto120oC [Refer Table-I at S. No. I(c) of technical terms & conditions].

1.4- One coat epoxy red oxide zinc chromate primer & two coat epoxy finish paint suitable for temperature upto 120oC [Refer Table-I at S.No. I(d) of technical terms & conditions].

1.5- Surface preparation and one coat synthetic enamel finish paint suitable for temperature upto 120oC [Refer Table-I at S.No. I(e) of technical terms & conditions].

1.6- One coat red oxide zinc chromate primer & two coat synthetic enamel paint suitable for temperature upto 120oC [Refer Table-I at S.No. I(f) of technical terms & conditions].

1.7-One coat red oxide zinc chromate primer & two coat heat resisting alluminium paint suitable for temperature upto 250oC [Refer S.No. I(g) Table-I of technical terms & conditions].

1.8- Two coat heat resisting aluminium paint suitable for temperature upto 600oC [Refer S.No. I(h) Table-I of technical terms & conditions].

1.9- One coat epoxy oxide zinc chromate primer and two coat high build epoxy finish paint suitable for temperature upto 120o C [Refer S.No. I(i) Table-I of technical terms & conditions].

1.10- One coat epoxy oxide zinc chromate primer ,one coat high build epoxy and one coat polyuretahne finish paint suitable for temperature upto 120oC [Refer Table-I at S.No. I(i) of technical terms & conditions].

1.11- One coat protectomastic primer & two coat epoxy finish paint suitable for temperature upto 120 deg C [Refer Table-I at S.No. I(j) of technical terms & conditions].

2.0- Proper surface preperation & application of primer/paint over Gratings.

2.1- One coat red oxide zinc chromate primer and two coat quick drying black bitumen on gratings suitable for temperature 120oC [Refer S.No. II(a) Table-I of technical terms & conditions].

3.0-Proper surface preperation & application of one coat red oxide zinc chromate primer and two coat synthetic enamel paint suitable for temperature upto 120 deg. C [Refer S.No. Sr. No. I(f) Table-I of technical terms & conditions]

3.1-Dozer

3.2-Terex

3.3- Hydra 3 Te.

3.4- Hydra 5 Te.

3.5- Hydra 8 Te.

3.6- Crane P&H Capacity 127 Te including its extension (120 Feet)

3.7- Crane P&H Capacity 75 Te with its boom

3.8- Coles Crane & its extension

3.9- Backhoe Loader (JCB)

3.10- Tractor

3.11- Trolley 5 Te

3.12-Trolley 10 Te

3.13- Diesel Welding Set

3.14- Diesel Generator

3.15- Portable Air Compressor

3.16- Jumbo Truck/Pallet Truck

3.17- Air Compressor and Receiver

4.0 Sand Blast Cleaning of Pipes, vessels, Crane Booms etc.

Scope of Work: Party has to make their own arrangement for the Machines, Air Compressor, Sand and proper covering of the Area, so that Plant Area is not disturbed due to this activities etc., required for execution of the job.

4.1 Sand Blast Cleaning of Pipes, vessels, Crane Booms etc.

5.0 Skilled and Unkilled Mandays required for cleaning and painting Jobs

5.1- Skilled Mapower

5.2- Unskilled

SRI SAI PROTECTIVE COATINGS

M/s Dinesh kumar Gupta

MESSERS ASHWANI KUMAR