WBPHED/AE/BMSD/NIeT- 10 OF 2024-2025/16

Amount

LL submersible pump set

Withdrawing the damaged 3 HP Submersible Pump Motor set from CWR after disconnection of Power line and pipe line as per direction of EIC.

Carrying charges of the above damaged 3 HP submersible pump motor set from site to workshop at Bankura including loading and unloading complete.

Dismantling the damaged 3 HP pump motor set part by part with cleaning & through checking

a) For pump

b) For Motor

Supply the following spares as per sample :-

i) For Pump

a) Pump casing bush (GM)

b) Shaft sleeve bush (SS)

c) Impeller Noryl

d) 8mm stud (8mm x 33mm)

e) 8mm nut

f) SS key for shaft

g) 12 mm T. bolt

ii) For Motors

a) Rotor bush (GM)

b) Rotor sleeve (SS)

c) 10mm nut for upper & lower casing

d) Motor sand guard (Rubber)

e) thrust carbone

f) 2.5sq. mm. 3core copper water proof submersible cable (Finolex)

g) Rotor shaft turning & polishing

h) Motor water seal

i) Rewinding the 3 HP submersible motor by supplying suitable gauge copper wire dual coated class F insulation as per existing gauge as per direction of E.I.C.(Rate is after deduction of old cu coil cost)

Reassembling charges for pump motor by old spares & new spares of Sl. No. 3 ( i & ii) with through cleaning & overhauling complete

i) For pump

ii) For motor

Painting the pump motor sets with 2(two) coats by approved anticorrosive paint after through scraping the body of pump & motor all complete as per direction of E.I.C.

Carrying the repaired pump motor sets from workshop to Bhulanpur including loading & unloading at both ends

Lowering of the repaired submersible pump motor set stage by stage by means of chain pulley block arrangement and making safety arrangement by fitting fixing of nylon rope and making power line and supply main line connection, interconnection with the delivery line all complete as per direction of E.I.C.

Light fixture

Supply delivery of the following material at site :-

e) Supply delivery fitting fixing LED light fixture 90W, 110 lm/w having pressure die cast Al. housing pot optical reflector and heat resistant toughened glass cover complete set. Make-Approved vendor list.(Similar type model BRP409 LED 110 CW)

f) 2.5 sq mm 1.1kv grade pvc insulated & unsheathed FRLSH copper conductor as per IS 694.(for power line)

Fitting fixing of the above materials on street light pole and power line connection with the help of tools and tackles as per direction.

Add: 18% GST

Add: 1% Cess

RAJIB COMPANY (BID ID -6047634)

M/S NABIN GOPAL SENGUPTA (BID ID -6047646)