REPAIRS TO WOODEN,STEEL,PVC JOINERY, VARIOUS B/R WORKS IN OMQS , GOLDEN JUBILEE AREA AND REPAIR / RENOVATION OF MES INSTALLATION, OFFICE ACCOMMODATION, FURNITURE YARD AT AIRFORCE STATION TAMBARAM

Amount

Taking down chowkats/Frames of area not exc 1.5 Sqm with shutter (without taking off shutters from the frame) each all as specified and as directed.

All as per item No 1 above but area exc 1.5 Sqm & not exc 4 Sqm all as specified and as directed.

Taking down shutters of any description of area not exc 1Sqm each all as specified and as directed.

Taking down shutters of any description of area exc 1Sqm & not exc 2 Sqm each all as specified and as directed.

Resecuring or easing & adjusting without taking down of shutters of any description area not exc. 1sqm each all as specified and as directed.

Resecuring or easing & adjusting without taking down of shutters of any description area exc. 1sqm and not exc 2sqm each each all as specified and as directed.

Dismantling unframed wooden fillets, rails, posts etc under 40 sq cm in section all as specified and as directed.

S&F second class hard wood plain fillets, square, rectangular in section, wrought, sectional area exc 6 but not exc 13 Sq cm, fixed with screws to wooden frame work all as specified and as directed.

All as per item No 8 above but sectional area exc 13 and not exc 25 sq cm all as specified and as directed.

S&F 2nd class Hard wood plain, solid, straight chowkats and frames wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joint all as specified and as directed.

S&F 2nd class Hard wood glazed/skeleton door shutters 30mm thick open rebated prepared to receive glass, gauze divided in squares with plain, chamfered or rounded, mitred and rebated sash bars any number with plain, chamfered or rounded, mitred and rebated beads for securing glass / gauze etc all as specified and as directed.

All as per item No.11 here in before but with or without sash bar of size 25mm thick for window and the like.

S&F 2nd class hard wood plain framed panelled shutter 30mm thick (any number of panel) with panels of timber flat on both sides (feather edged) or of veneered particle board medium density, wood particle board with commercial face veneers of ply wood commercial type all as specified and as directed.

S&F flush shutter 30mm thick Solid core construction with Block board and plywood face pannels, commercial type on both sides all as specified and as directed.

S&F for Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification complete all as specified and directed

S&F for Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottomrails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification and as directed.

S&F 100 mm long stainless steel butt hinges for PVC doors all as specified and as directed.

S&F Extruded aluminum alloy with galvanised MS hinge pin anodised of size 75mm type D-22 all as specified and as directed.

S&F Extruded aluminum alloy with galvanised MS hinge pin anodised of size 100mm type B-21all as specified and as directed.

S&F Extruded Aluminium alloy handle fabricated type, anodised of size 100mm all as specified and as directed.

All as per item No. 20 above but fixed in repair

S&F Extruded Aluminium alloy handle fabricated type, anodised of size 150mm all as specified and as directed.

All as per item No. 22 above but fixed in repair

S&F Aluminium anodised barrel tower bolt of extruded section of size 100mm all as specified and as directed.

All as per item No.24 above but fixed in repair

S&F Aluminium anodised barrel tower bolt of extruded section of size 150mm all as specified and as directed.

All as per item No.26 above but fixed in repair

S& 250mm size mild steel ordinary rat & tail rod pattern spring (Helical) including roller & roller plate all as specified and as directed.

S&F in floor door stopper 140 mm long of aluminium alloy body and tongue, anodised with hard drawn steel spring in floors all as specified and as directed.

All as per Sl item No.29 here in before but fixed in repair

S&F Aluminium alloy, anodised sliding door bolt, with hasp, staple (bolt type) and fixing clips of sheets, cast or extruded section and fixing bolts and sliding bolt of extruded section or cast alluminium alloy of size 250 mm all as specified and as directed.

All as per item No.31 above but fixed in repair

M&L for preparing new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer all as specified and as directed.

M&L for preparing old wooden surfaces of any description over 10cm width or girth and applying one coats of synthetic enamel paint all as specified and as directed.

M&L for preparing new Steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer all as specified and as directed.

M&L for preparing Old Steel surfaces of any description over 10cm width or girth and applying one coats of synthetic enamel paint all as specified and as directed.

Cutting holes in to brick wall built in cement mortar exc half brick & not exc full brick and making good in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required all as specified and as directed.

M&L for small articles such as hold fasts etc. of Flat Iron 25 x 3, Grade confirming to Fe-290 Gde E-165 all as specified and as directed.

M&L for preparing small articles such as hold fasts, end of posts etc. of area not exc 0.1Sqm and treated with Cresote Oil/ black bituminous paint etc all as specified and as directed.

M&L preparing of wood and wood based materials, steel, and iron work, new or old and treating ends of posts, backs of chowkats, etc, area tarred exc 0.1 sq m but not exc 0.5 sq m each and treated with tar or coat tar black paint all as specified and as directed.

M&L for framed work such as grill, grating, guard bars etc. Grade confirming to Fe-290 Gde E-165 all as specified and as directed.

Dismantling of Mild steel works of any description all as specified and as directed.

Dismantling of mild steel grills and refixing in the same opening all as specified and as directed.

S&F Stainless steel wire mesh of nominal dia of wire 0.36mm and average width of aperture 1.40mm & fixed with stainless steel wire staples including wooden fillets/beadings, screws etc complete all as specified and as directed

All as per Sl. Item No.44 here in before but fixed in repair

Hacking out old broken glasses any thickness size, quality or description from steel/wooden frames fixed with putty or with beads all as specified and as directed.

S&F 3mm thick plain ordinary glass fixed in squares not exc 0.5 Sqm in each panes with wooden beading or glazing putty all as specified and as directed.

S&F 3mm thick figured/frosted or pin headed glass fixed in squares not exc 0.5 Sqm in each panes with wooden beading or glazing putty all as specified and as directed.

Cutting out old steel hinges (projecting type) friction/non friction type from existing windows, S&F new hinges and welded, including cutting out and making good the jamb portion where required and applying two coats of synthetic enameled paint over a coat of red oxide primer to hinges and disturbed portion etc. complete all as specified and as directed.

S&F in repair mortice lock of mild steel vertical type of size 150mm 6 Lever all as specified and as directed.

S&F in repairs door closer, aluminium (extruded section body) hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and weight between 61 to 80kg all as specified and as directed.

S&F 0.56mm plain aluminium sheeting, alloy 31000 H4 in ridges, hips and straight flashing ( Length and girth as fixed ) all as specified and as directed.

Running welding in repairs not exceeding 6mm thick metal sheets such as dovetailed hinges, peg stay assembly and MS butt hinges etc with steel window and steel frames of doors all as specified and as directed.

Easing / straightening of shutters frame of steel windows of any type making operational and greasing to hinges (welding and painting will be measured separately) all as specified and as directed.

S&F in repairs mild steel plate type steel handle of 100mm size left/right suitable for steel windows with fiber washer tube type including nuts and bolts all as specified and as directed.

S&F in repairs mild steel peg stays 150 mm long for steel windows all as specified and as directed.

S&F in repairs Stainless steel tubular 20mm external dia for curtain rod in pelmet box, curtain rods etc all as specified and as directed.

S&F in repairs stainless steel Brackets for 20mm dia curtain rods all as specified and as directed.

S&F for powder coated aluminium corrugated 20mm dia curtain rods fixing to brackets including cutting into required length complete all as specified and directed.

S&F for aluminium powder coated bracket with decorative fincles to catch and hold 20mm curtain rod including fixing with nails complete all as specified and directed.

Resecuring, adjusting, cushioning minor repair of aluminum door, rubber beeding,lock etc without taking down, area exc 1.0 Sqm but not exc 2.0 Sqm all as specified and as directed.

All as per item No 61. above but area not exc 1.00 Sqm for windows

S&F in repairs 5mm thick plain glass fixed with rubber beading or oil putty etc all as specified and as directed.

S&F in repair aluminium anodised grills (pattern DG-104) weight of 2.00 to 3.20 Kg/Sqm for windows, ventilators, etc including jointing, cleats etc and fixed with medium screws into walls / frame work etc complete all as specified and as directed

S&F Aluminium anodised section as in frames of doors, windows and ventilators with one or more rebates including joining cleats etc complete all as specfified and directed.

S&F Aluminium anodised door shutters,with using aluminium section weighing 0.55 kg / RM including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, snap beading , screws etc complete all as specified and directed.

S&F Aluminium anodised window and ventilators shutters, fixed type with sash bars with using aluminium section weighing 0.55 kg / RM including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, snap beading , screws etc complete all as specified and directed.

S&F Aluminium anodised window and ventilators shutters, side hung type without sash bars with using aluminium section weighing 0.55 kg / RM including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, snap beading , screws, peg stays 150mm long - 01 No, Hinges type B 21 100mm size - 02 Nos , one 100mm aluminium handle for each shutters etc complete all as specified and directed.

S&F 18/19mm thick plywood, grade, BWP, type BB fixed with screws to timber frame work including wooden beading/ fillets all-round etc., complete all as specified and as directed.

S&F in repairs 18/19 mm thick plywood with one sie decorative and other plain lamination , fixed with screws to timber frame works , complete all as specified and as directed.

S&F in repairs 18/19 mm thick plywood grade BWP, type BB fixed in cup board shelves and partitions including wooden fillets , fixed with screws, complete all as specified and as directed.

S&F in repair pre laminated particle board 18/19 mm thick interior grade prelaminated one side with decorative choice lamination and other side balancing white lamination with lipping as in pelmet boxes all as specified and as directed

S&F in repair pre laminated particle board 12 mm thick interior grade prelaminated one side with decorative choice lamination and other side balancing white lamination with lipping as in doors of cupboards and cabinets all as specified and as directed

S & F 30mm wide Continuous (piano) hinges, mild steel, bright finish or electrogalvanised complete all as specified and directed.

S&F aluminum anodised Hasp & Staple of size 75mm safety type including bolt to hinge plate and fixed with screws all as specified and as directed.

S&F in repairs 75mm long hasp and staple aluminium anodised including bolt to hinge plate and fixed with screws all as specified and as directed.

S&F in repairs two lever lock (vertical type), 100 mm long, brass body suitable for aluminium doors all as specified and as directed.

S&F in repairs aluminium powder coated door seal fixed at bottom of the door all as specified and as directed.

S&F in repair 3 to 4mm plain mild steel wire galvanised class 3, fixing to wood, concrete, steel etc including securing with and provision of galvanised iron tying wire, galvanised iron staples or steel pins etc all as specified and as directed.

Restraining and resecuring including making good staples etc of Plain mild steel wire in any dia and in any position as for mosquito nets, cloth drying net and the similar work and fixing to straining bolts,hooks,eyes etc all as specified and direted

Dismantling AC corrugated or semicorrugated sheets in roof covering / wall cladding all as specified and as directed.

Dismantling structural steel work including doors, gates but excluding framed truss etc all as specified and as directed.

S&F multi rib TMT profile high tensile, colour coated galvalume steel sheets 0.47 mm thick as in roof covering or vertical surface having maximum pitch of 250mm centre to centre and minimum 28mm crest depth in length, as per site requirement fixed with self drilling/self taping screws, EDPM seal end lap 100mm and side lap one corrugation complete all as per the manufactures instruction and all as specified and as directed.

S&F structural steel work as in roof trusses (framed), trussed, purlins, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc, conforming to Fe-290 (Gde E-165) all as specified and as directed.

All as per item No 84 above but except material (old steel obtained from dismantling shall be reused after proper cleaning) all as specified and as directed.

S&F for Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 all as specified and as directed.

S&F for Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded all as specified and as directed.

Demolition of cement concrete(unreinforced) in ground floors and pavings not exc 15 cm thickness (below or above ground level) complete all as specified and directed

Taking down cement plaster of any description on brick or concrete surfaces etc including racking out joints, hacking for key, scrubbing down with water etc. all as specified and directed

M&L 75 mm thick PCC 1:3:6 type C-2 using 40mm graded stone aggregate as in hardstanding, finishing the surface even and smooth without using extra cement including necessary form work all as specified and directed

M&L for 55mm thick cement concrete 1:2:4 type B-1, using 20mm graded stone aggregates as in floor finishning, plinth protection finish the surface even and smooth without using extra cement complete all as specified and directed.

M&L Screed bed 20mm thick with using CM 1:6 on floors all as specified and directed

M&L for 10mm thick plaster in CM 1:6 finished even & smooth without using extra cement all as specified and directed

S&F plain cement concrete coloured chequered floor tiles of size 300x300x 22 - 25 mm thick laid in cement slurry and pointed with grey cement and pigment to match the shade.Pattern, size and shade all as specified and as directed by Engr-in-charge.

S&F structural steel work as in roof trusses (framed), trussed, purlins, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc, conforming to Fe-290 (Gde E-165) all as specified and directed

S&F Multi rib TMT profile high tensile curved colour coated galvalume steel sheets 0.47 mm thick as in roof covering, having maximum pitch of 250mm centre to centre and minimum 28mm crest depth in length, as per site requirement fixed with self drilling/self taping screws, EDPM seal end lap 100mm and side lap one corrugation complete all as per the manufactures instruction and as directed by Engr-in-Charge

All as per item No 96 here in before but plain sheet as in ridge sheet having width 600mm.

S&F in repair 4mm thick desinger pattern AC ceiling of size 595x 595mm with powder coated GI frame work for grid size 600x600mm of Make Everest or its euqivalent as approved, fixed with 4mm dia GI wires hanged from roof truss, including two coats of oil bound distemper to ceiling board all as specified and directed

S&F structural steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc, complete drilled for fixing of steel sheeting or other coverings. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging; also fastening and fixing complete, conforming to Fe 410-W (Gde-E-250) quality - A

M&L for preparation of newly plastered wall surfaces and applying three coats of white wash complete all as specified and directed.

M&L for preparation of newly plastered wall surfaces and applying two coats of cement based paint all as specified and directed

Taking down of steel tubing and connections complete on walls floors etc for 15mm bore of pipe all as specified and directed

All as per item No. 102 above but bore of pipe in 20mm dia.

S&F Supplying and laying of 16mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches complete all as specified.and directed.

S&F Supplying and laying of 20mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches complete all as specified and directed.

S&F in repairs 15 mm bore chromium plated long body fancy Bib tap cast copper alloy crutch handles screwed down for iron or for brass ferrule complete all as specified and directed.

S&F in repairs 15 mm bore chromium plated cast copper alloy fancy type pillar taps screwed down high pressure with long screwed shanks and fly nuts screwed for iron pipes all as specified and directed

S&F in repairs 15mm dia chromium plated fancy type angle cock cast copper alloy screwed down high pressure fancy screwed both ends for pipe or for union all as specified and directed

S&F in repairs chromium plated Waste coupling (half or full threaded) of 32mm bore Complete all as specified and directed.

S&F in repairs PVC connections 15mm dia 600mm long (for cold/hot water connection with brass or PTMT flynuts and washer at both ends all as specified and directed

S&F in repair brass chromium plated tubular towel rails 20mm dia D type 60cm long between flanges complete all as specified and directed.

S&F in repairs EWC Plastic water closet seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed

S&F in repairs PVC valve less syphonic action type flushing cistern 10 litres capacity, high/low level with inlet ball valve, float and handle including brackets all as specified and directed

S&F in repairs 32mm PVC flush pipe low or high density for low / high level flushing cistern all as specified and directed

S&F in repairs 32mm PVC waste pipe low or high density for WHB/ Sink all as specified and directed

S&F in repairs Chromium plated Towel ring with chromium plated brass screws and wooden/plastic cleats complete all as specified and directed

Taking down rain water pipes, waste/soil pipes (any size or pattern), including all fittings, heads, shoes, bends, swan necks, etc including cleaning or refixing or removal to store all as specified and directed

S&F 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joint laid in trenches or in floors all as specified and directed

All as per item No 119 above but 110 mm bore pipes

S&F 75mm dia PVC (SWR) bend without access door

S&F 110mm dia PVC (SWR) bend without access door

S&F in repairs 75mm dia PVC (SWR) floor trap with grating including jointing with solvent cement all as specified and directed

S&Fin repairs 75mm dia PVC (SWR) multi floor trap with grating including jointing with solvent cement all as specified and directed

S&F in repair viterous china WHB flat back of size 550x400mm including GI Brackets, CP brass waste coupling with check nut and washers of suitable to be complete all as specified and directed

S&F in repairs brass, chromium plated soap dish fixed to walls with chromium plated brass screws all as specified and directed

S&F in repairs 5-8mm thick acrylic corner shelf of 300mm radius with chromium plated grills and guide bars complete all as specified and directed.

S&F in repairs chromium plated PVC health faucet with 1 mtr PVC tubing covered by CP coated rings all as specified and directed

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting exceeding 20cm girth all as specified and directed

S&F in repairs vitreous china urinal, Half stall type, white (excluding flushing cistern, flush pipe and waste pipe) all as specified and directed

S&F in repairs CP Urinal spreader of for fixing with 15 mm dia pipe all as specified and directed

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing unserviceable tiles to store and rubbish off the premises complete all as specified and as directed.

M&L screed bed or bedding layer of mortar 15 mm thick for laying floor finishes in CM 1:6 complete all as specified and directed

Demolition of stone slab of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar complete all as specified and as directed.

M&L 10mm thick Cement Mortar 1:4 for backing coat on walls complete all as specified and directed .

M&L Non - skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match all as specified and directed

M&L for Non - skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tile complete all as specified and as directed.

M&L Glazed Ceramic coloured light coloured tiles 8-10mm thick , size 300x450mm in vertical surfaces such as skirtings,dados etc set and jointed in neat cement slurry and pointed in coloured cement to match coloured tiles icomplete all as specified and directed.

M&L 18 to 20mm thick granite slab, machine cut bedded jointed and pointed with white cement slurry including cutting & Polishing , white marble pattern complete all as specified and directed.

murugan enterprieses

vinayaga Steels

Raju Builders

vrk constructions

SINI PROMPT

Varsa Constructions

Sri Sankar Enterprises

M/s. V. BAKTHAVATSALAM & CO