Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance NO 3 BALAKRISHNA BUILDING NG ACHARYA MARG CHEMBUR MUMBAI MUMBAI MAHARASHTRA 400071 | MUMBAI SUBURBAN | MAHARASHTRA | 400071 | Admitted-Finance |
| 2 | Admitted-Finance | Admitted-Finance |
| 3 | Admitted-Finance | Admitted-Finance |
Tender Value
₹91 L
EMD Value
₹1.8 L
Closing Date
12 Nov 2024, 3:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Chief Engineer (ESG)
DCSEM, DAE, 3rd floor north wing V.S. Bhavan, Anushaktinagar, Mumbai-94
Maintenance of street and building lighting installations at residential buildings under DCSEM in Mumbai
2024_DCSEM_830301_1
DCSEM/CQD/QSC/GSS/24-25/NIT-28 , dt.09.10.2024
Open Tender
Electrical Works
Item Rate
545 days
Anushaktinagar, new mandala old mandala etc mumbai
please refer tender documents
8 documents required · 8 mandatory
₹0
₹1.8 L
Yes
21 Jan 2025
14 Oct 2024
14 Nov 2024
15 Oct 2024
12 Nov 2024
15 Oct 2024
15 Oct 2024 - 25 Oct 2024
Amount
PART A:-Day to day maintenance & preventive maintenance.
PART B:- Replacement of the following materials required for maintenance as per specifications of Maintenance contract. (Installation cost shall be included in item no.1 &2 of Part A).
PART C:- Job works
Description of Work / Item(s)
Amount
Day to day breakdown maintenance of street lighting system and solar traffic blikers, stair case/common area lighting,area lighting systems at Residential at various locations in Anushaktinagar, New Mandala, Old Mandala, TMC/TIFR ,Paylipada , Chembur, Ghatkopar and Mulund colonies colonies as per clause no.1 tender specifications and as instructed by the Engineer-in-charge.
Preventive maintenance of street lighting,area lighting,staircase/corridor lighting of residential buildings at Anushaktinagar, New Mandala, Old Mandala, TMC/TIFR ,Paylipada , Chembur, Ghatkopar and Mulund colonies as per clause no.2 tender specifications and as instructed by the Engineer-in-charge. Scope also includes DB dressing, earthing, RCBO testing and submitting report.
Description of Work / Item(s)
Amount
LED Fixtures & Accessaries :
1200mm LED tube with min.2100Lumen output and efficacy of min.100 lumen/W
LED bulkhead similar to model no.:WT140W LED7S CW PSU S1 PC of M/S Philips with align screw etc.
Driver for LED fixture model no. BRP022 P LED 21 CW MR S1 PSU GR P3568 of M/s Philips make
Driver for LED fixture model no.:BRP410 LED CW 072 MR FG S1 PSU GR of M/s Philips make
Holder suitable for T-8 LED tubes
MCB/RCCB/RCBO and enclosures
6-32A,SP,MCB,10kA B.C.
40-63A,SP,MCB,10kA B.C.
6-32A,DP,MCB,10kA B.C.
32A,4P,MCB,10kA B.C.
63A,4P,MCB,10kA B.C.
32A,DP,RCBO,30mA,AC type(2module)
32A,FP,RCBO,30mA,AC type(4module)
Metal enclosure for mounting DP/FP MCB
Copper lugs reducer type / Heavy duty tube terminal type for following sizes of wires/cables
6sq.mm/10 sq.mm reducer type
6sq.mm/10 sq.mm Heavy duty tube terminal type
16sq.mm/25sq.mm reducer type
Upto 10/16 sq.mm copper ferrule
G.I Fixing fasteners
Coach Screw 3/8” x 3” long
Anchor Fastener 3/8” x 3” long
Anchor Fastener 1/4” x 2” long
Spare parts for solar LED traffic blinker fixtures of M/s Altos Electronics Pvt. Ltd, Pune make
Charger controller
12V,26AH SMF battery suitable for solar light of M/s Amarraja/Exide make
LED blinker fixture
Solar panel 40W
SMC/FRP boxes
Street light terminal box of approx size 300 x 200 x 125 mm, made of FRP/SMC of M/s syntax make, complete with front openable cover with SS allen-key screw with key locking arrangement, 2 mm thick Stainless steel gland plate, water proof gasket,32A,4way,415V Resin cast connector suitable termination cable of size 16sq.mm, 4way neutral terminal and SP MCB 6A -1no. ( supplied by dept.) mounted in the box with DIN channel etc. including clamping arrangement made up of 25x3mm hot dip G.I strip for mounting on street light pole with suitable GI nut bolts etc.
IP65 polystyrene thermoplastic cable junction box similar to catalogue No. KF2525 of M/s. HENSEL make with 32A, 4 way, 415V resin cast stud type connector suitable termination cable of size 16 sq. mm, SP MCB C-6A-1no (MCB will be supplied by dept). on DIN chanel, 2mm thick G.I. gland plate of suitable size and openable plain cover etc. and as per instructions of E.I.C.
Resin cast connector 32A,4way,415volt suitable for FRP junction box
1100 V grade PVC insulated, tapped PVC inner sheath and extruded PVC outer sheath, flexible copper conductor power cable of following sizes confirming to relevant IS with upto date amendments and specifications
3 C x 2.5 sq. mm copper flexible cable
3C X 0.5 sq.mm Flexible copper cable
Spares of power supply feeder for area lighting/street lighting
Digital daily digital timer Similar to TS2M1-16A 230V V2 of SELEC make
Modular 40A,4P contactor
Modular 25A,2P contactor
PVC casing -capping / conduit
PVC casing – capping of 25 x 16mm fixing on wall / slab / beam with nylon plug and wood screw complete with all accessories and at the intervels of 400mm approx.
1.1 kV FRLS grade PVC insulated copper wires of 1.5 sq. mm size including termination with suitable copper lugs etc.
25mm OD G.I PVC coated flexible conduit with adaptor
PVC gland suitable for 3Cx1.5 sq.mm sq.mm flexible cable
White colour Switches, Plastic/metal surface boxes and plate cover with frame similar to Myris series of M/s. Legrand make.
6 A, SP, one way switch 1 module
6 A, SP, two way switch, 1 module
1/2 module plastic surface box
1 module plate cover with frame
2 module plate cover with frame
Ceiling rose , Square box, PVC plate, bakelite sheet.
Ceiling rose 3plate polycarbonate body.
PVC square box for fixing ceiling rose / tube light fixture
5" dia. PVC round plate
3mm thick Bakelite sheet for installation of modular switch plates including necessary accesoories like chromium plated cup washers, GI screws etc.
Description of Work / Item(s)
Amount
Supply, installation, testing & commissioning of 16way double door SPN MCB DB similar to Cat. No. 507613 of M/s Legrand with required hardware and with following : 1) 25A,FP,RCBO-1no.; 2) 32A,DP,changeover switch-1no.; 3) 25A,FP,power contactor-1no.; 4) 0.5A,SP,MCB-1no.; 5) 6 to 32A, SP MCB-5nos.; 6) cable end box 7) interconnecting wiring with 1.1kV grade PVC insulated 6sq.mm copper wires
Supply, installation, testing & commissioning of LED based traffic blinker with inbuilt emergency battery backup of 12 hours Light-Amber-Operating Voltage-230VAC as instructed by EIC
Supply, installation, testing & commissioning of following Luminaries with complete accessories like driver/protective device etc. ,interconnection with 3C x 1.0 sq. mm flexible copper cable between existing point & fixture. etc. suitable for operation on 240 V, 50 Hz. A.C supply as instructed by E.I.C
Street light LED luminaries having minimum output of 2000 lumens and efficacy of 120 lm/watts.
Street light LED luminaries having minimum output of 7000 lumens and efficacy of 120 lm/watts.
Flood loght LED luminaries having minimum output of 3500 lumens and efficacy of 120 lm/watts.
Flood loght LED luminaries having minimum output of 11000 lumens and efficacy of 120 lm/watts.
Fabrication, supply and installation of swiveling bracket for street light luminaries with 1500 mm long 25 mm dia. class B G.I. pipe bracket bend into required shape fixed in 450mm long 38 mm dia class B GI pipe with 2 nos clamping arrangement fixed on surface of slab/beam by 4 Nos. minimum 6mm anchor fastener/on wall with coach screw by means of 300 mm long 25 x 6 mm G.I. strip welded to above 38 mm G.I. pipe with suitable coupler for fixing of lighting fixture.
Fabrication, supply and installation of hot dipped Galvanised M.S outdoor (IP65) boxe of size 500mm (L) x 400mm (B) 300mm (Height) made of 2mm thick along with suitable gasket, openable cover with PVC knob screw. Note: Fabricated box shall be suitable to accomodate 26Ah, 12V battery and Charger unit with gap between battery and Charger unit.
Fabrication, supply and installation of hot dipped Galvanised M.S boxe of size aprox. 130mm (L) x 130mm (B) 80mm (Height) with openable cover made of 2mm thick along with 4 way 16A bakelite connector and openable cover. Scope also includes retermination of existing cable.
Fabrication, supply and installation of hot dipped Galvanised M.S boxe of size aprox. 130mm (L) x 130mm (B) 80mm (Height) with bakelite sheet. Scope also includes retermination of existing cable, installation of existing switch, plate and cover.
Supply,installation, testing of commissioning of 1100 V grade XLPE insulated, tapped PVC inner sheath and extruded PVC outer sheath, GI wire armoured Aluminium/copper conductor power cable of following sizes confirming to IS-7098 Part – I with upto date amendments and specifications, fixed on wall / column / slab with 4mm thick GI spacer and 16swg thick GI saddles fixed at an interval of 400mm using nylon rawal plug, 10 X 35 mm GI wooden screw etc. for cable sizes upto 35sq.mm/ fixing of cables of sizes above 35sq.mm with 2mm thick saddles on clamps made up of 25X 3mm MS flat at intervals of 500mm using nylon rawal plug, 10 X 50 mm GI coach screw etc./in existing hume pipes 900 mm below ground level/ in ground at a depth of 900 mm below ground level including excavation in all type of soils excluding hard rock , sand/stone dust bedding, laying of backed bricks(20 nos. per meter) as per IS on side & top, temporary reinstatement, back filling, dewatering if necessary, disposal of excess earth within the radius of 3000 m etc. all as required & instructed by the Engineer-in-charge.
3C X 6sq.mm solid Al. conductor cable in Ground
3C X 6sq.mm solid Al. conductor cable On wall/column
3C X 6sq.mm solid Al. conductor cable in existing Hume pipe/GI pipe/HDPE pipe/exacavated trench with out brick and sand
Installation, testing of commissioning of dept. supplied 1100 V grade XLPE insulated armoured cable of sizes up 31/C X 50sq.mm cable, fixed on wall / column / slab with 4mm thick GI spacer and 16swg thick GI saddles fixed at a interval of 400mm using nylon rawal plug, 10 X 35 mm GI wooden screw etc. for cable sizes upto 35sq.mm/ fixing of cables of sizes above 35sq.mm with 2mm thick saddles on clamps made up of 25X 3mm MS flat at intervals of 500mm using nylon rawal plug, 10 X 50 mm GI coach screw etc./in existing hume pipes 900 mm below ground level/ in ground at a depth of 900 mm below ground level including excavation in all type of soils excluding hard rock , sand/stone dust bedding, laying of backed bricks(20 no.s per meter) as per IS on side & top, temporary reinstatement, back filling, dewatering if necessary, disposal of excess earth within the radius of 3000 m etc. all as required & instructed by the Engineer-in-charge.
In Ground
On wall/column
In existing Hume pipe/GI pipe/HDPE pipe/exacavated trench with out brick and sand
Cable Dressing
Dressing of 3C/4C X6/10sq.mm armoured cable on wall / column / slab with 4mm thick heavy dip galvanized GI spacer and 16swg thick hot dipped GI saddles fixed at a interval of 400mm using nylon rawal plug, 10 X 35 mm GI wooden screw etc.
Dressing of 4C X 16sq.mm to 3.5C X 50 sq.mm armoured cable on wall / column / slab with 4mm thick heavy dip galvanized GI spacer and 16swg thick hot dipped GI saddles fixed at a interval of 400mm using nylon rawal plug, 10 X 35 mm GI wooden screw etc.
Providing cable end termination of the following sizes 1.1kV grade PVC/XLPE insulated armoured cables with solderless, heavy duty tinned copper lugs, brass cable gland, insulation tape, duplicate earthing for cable gland with tinned copper clamp as per relevant IS specification and as per instruction of Engineer incharge.
Upto 4 C x 6 sq. mm PVCA cable
4 C x 10/16 sq. mm PVCA cable
3.5/4 C X 25/35 sq. mm PVCA cable
GI Pipe & wire
Installation of dept. supplied 50 mm dia.class B G.I pipe with all fixing arrangements on surface, jointing of pipes with couplers, loading unloading from DCSEM store to site, etc as per required & instructed by the Engineer-in-charge
Providing G.I wire of 8SWG along with existing cable spacer saddle or with cable tia all as per instruction of EIC
Dressing of existing GI Strip conductors. Scope of work includes following 1) Cleaning of GI strip removal of paint/ cement etc. 2) fixing on wall / slab / column / beam with 16SWG GI saddles & 3 mm thick G.I. spacers at an interval of 500mm with all fixing accessories. 3) Providing 2 nos SS nut bolts of suitable size on joints. 4) Removal of nutbolts by cutting with grander. 5) Welding the joints in all four contact ages, painting the joint with Zink spray.
Supply, installation, testing & commissioning of hot dipped following GI strip fixed to wall / slab / column / beam with heavy duty GI spacer saddle or in ground at a depth of 600 mm below ground level including excavation in all type of soil , interconnection of earth strip / wire GI nut bolts & washers, painting with two coats of black bituminous compound for earth strip in ground and green colour enamel painting strip on surface etc. all as required & instructed by the Engineer-in-charge
25X 6mm in ground / Hume pipe
25X 6mm On Wall/column/beam
25X 3mm On Wall/column/beam
Providing of coping of size 400mm dia & 350mm height for street light poles with 1:3:6 PCC using graded stone aggregate including consolidation, frame work, shuttering, finishing, curing etc. including breaking of existing coping excavation around the poles if required for making coping, curing as per the instruction of EIC
Earth excavation in hard rock/soft rock & breaking the existing drain walls & reinstatment
Excavating of soft soil including shorting or dewatering, removing of bricks/tiles etc. refilling and consolidation of the surface. Disposing the excess earth within a 3000 meter radius as directed by engineer-in- charge.
Cutting of asphalt road / concrete flooring /drain of 200 mm depth by using hydraulic drilling machine as required and stacking of rocks, refilling and consolidation of the surface. Disposing the excess earth within a 3000 meter radius as directed by engineer-in-charge
Excavating in hard rock including shorting or dewatering, removing of bricks/tiles etc. refilling and consolidation of the surface. Disposing the excess earth within a 3000 meter radius as directed by engineer-in- charge.
Providing Plain cement concrete 1:3:6 using graded stone aggregate of 20 mm maximum size including consolidation, stacking, soling, frame work, shuttering, finishing, curing etc. Complete all as directed by Engineer in charge. Complete all as per specification & as directed by EIC.
Removing & re-laying of existing old Shahabad stone / paver blocks (60/ 80 mm thick) with care with out any causing any damages to adjacent footpath and paved area etc , stacking properly the serviceable materials and leveling of surfase before relaying, disposal of unserviceable materials all as per specification and as per direction of Engineer-in-charge.
K Sharma Electricals Private Limited (BID ID -3119165)
PRANIT PROCONCO (BID ID -3119066)
K Sharma Electricals Private Limited (BID ID -3119165)
PRANIT PROCONCO (BID ID -3119066)
SAMARTH ELECTRIC (BID ID -3117815)
PRANIT PROCONCO (BID ID -3119066)
K Sharma Electricals Private Limited (BID ID -3119165)
PRANIT PROCONCO (BID ID -3119066)
stage.html
html • 0.03 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .