Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹71.2 LAccepted-Finance BYE PASS ROAD JEYPORE KORAPUT | KORAPUT | ODISHA | 763001 | ₹71.2 L | L1 | Accepted-Finance L1 Bidder |
| 2 | L2₹80.5 L+₹9.4 L (13.2%)Rejected-Finance | ₹80.5 L+₹9.4 L (13.2%) | L2 | Rejected-Finance L2 Bidder |
| 3 | Rejected-Technical | - | - | Rejected-Technical Technically rejected |
Tender Value
₹74.9 L
EMD Value
₹74,921
Closing Date
13 Feb 2026, 5:30 pmClosed
CHIEF ENGINEER MECHANICAL
O/O THE EIC WR ODISHA BHUBANESWAR
Sand Blast Cleaning Painting of 4 Nos Pocket sluice gate size 18 288 mtr x 7 93 mtr 6 Nos Under sluice gate size 18 288 mtr x 4 26 mtr 10 Nos Stoplog gates size 13 00 mtr x 5 mtr and replacement of web plates of undersluice gate No 5 8 and HR 3 of
2026_CEMWR_125683_1
CEM/MDB-15/2025-26
Open Tender
Mechanical Works
Percentage
30 days
Mundali
As per DTCN
2 documents required · 2 mandatory
₹10,000
₹74,921
Yes
23 Feb 2026
7 Feb 2026
16 Feb 2026
7 Feb 2026
13 Feb 2026
7 Feb 2026
7 Feb 2026 - 12 Feb 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Labour charges for cleaning (sand blasting) the surface of embedded parts, skin plate,vertical stiffener, horizontal girder, turnbuckles, rope bracket etc area to be cleaned as per specification and direction of the Engineer-in-charge. | 6,708.42 | Sqm. | 245.1 | ₹16,44,233.74 |
| 2 | Labour charges for priming one coat of 40 micron thick with any approved primer (Epilux 610 primer Redoxide) to exterior surface of the gate components down stream side of skinplate, Horizontal gireder, vertical stifeners, turn buckles, rope brackets and other parts of downstream side of the gate including scaffolding above 4.60 mtr to any height as per specification of paint manufacturer and direction of the Engineer-in-charge. | 6,708.42 | Sqm. | 93.2 | ₹6,25,224.74 |
| 3 | Labour charges for painting 1st coat of 100 micron with any approved paint (i.e coaltar epoxy based paints to the upstream and down -stream area of gate including scaffolding above 4.60 mtr to any height as per specification of paint manufactures and direction of the Engineer-in-charge. | 6,708.42 | Sqm. | 135.29 | ₹9,07,582.14 |
| 4 | Labour charges for painting 2nd coat of 100 micron with any approved paint (i.e coaltar epoxy based paints to the upstream and down -stream area of gate including scaffolding above 4.60 mtr to any height as per specification of paint manufactures and direction of the Engineer-in-charge. | 6,708.42 | Sqm. | 103.74 | ₹6,95,931.49 |
| 5 | Supply Cost of approved primer, paints & thinner for priming one coat of 40 micron thick with any approved primer (Epilux 610 primer Redoxide) to exterior surface of the gate components down stream side of gate, and for painting 1st coat and 2nd coat of 100 micron with any approved paint (i.e coaltar epoxy based paints to the down -stream area of the skinplate , vertical stifener, Horizontal Girders with bracing etc as per direction of the Engineer-in-charge. | 6,708.42 | Sqm. | 136.04 | ₹9,12,613.46 |
| 6 | Infrastructural arrengement such as providing tool& tackles for painter, like chain pully,Tripod stand, Jhula, Scafolding, safety belt, Helmet, holepunch, wire brush, rope, paint brush,sand paper, other tools & tackles etc. needed at the work site. | 10 | set | 7,595 | ₹75,950 |
| 7 | Supply of Bottom rubber seal (size( 100mm width x 12mm thick ) each having length 18.288 m for 10 no of stoplog | 182.88 | mtr | 1,437.63 | ₹2,62,913.77 |
| 8 | Labour charges for seal change of stoplog gate as per the direction of the Engineer-in-charge. | 10 | set | 2,330.58 | ₹23,305.8 |
| 9 | Supply of structural steel materials for replacement / repair of web plate of undersluice gate no 5 and 8, HR gate no-3 of PMC and chq. plate of platform including 5% wastage material complete in all respects with all leads and lifts for smooth operation as per specification and direction of engineer-in-charge. | 12,122.22 | Kg | 79.21 | ₹9,60,201.05 |
| 10 | Fabrication cost for replacement/ repair of web plate of undersluice gate no 5, gate no 8, HR3 of PMC and chq. plate of platform including machinery, fixtures, labour, cutting, aligning, welding, cleaning, finishing, including consumables,complete in all respects with all leads and lifts for smooth operation as per specification and direction of engineer-in-charge. | 11,544.98 | Kg | 64 | ₹7,38,878.72 |
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.27 MB
DTCNMDB15.pdf
Tender Documents • 1.06 MB
BOQ_579962.xls
BOQ • 0.28 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .