Loading
Loading…
Loading…
Tender ID
Tender Value
₹2.4 Cr
EMD Value
₹3.6 L
Closing Date
22 Jan 2026, 10:59 pmClosed
Minor Irrigation Department
EXECUTIVE ENGINEER
Construction of BCB Across Local Nala Near Konalli Village in Wadgera Taluka Yadgir District (Under 4702 APB for the year 2025-26)
MI/2025-26/IW/WORK_INDENT9739
MI/2025-26/IW/WORK_INDENT9739
Open
Irrigation and Other Works
Two Tender Document System(Two Cover)
Minor Irrigation Division Kalaburagi
11 documents required · 11 mandatory
Minimum financial turnover (civil engineering construction works) not less than two times the annual payments from this contract (Rs. xxxxx Lakhs)
Satisfactoriy completed (atleast 90%) as prime contractor at-least one such similar work of value not less than Rs. xxxxxxx (80% of estimated cost of tender)
Executed in any one year the following minimum quantities of work (Cement Concrete - xxxx cum, Earthwork - xxxx cum, etc) (80% of peak rate of construction)
Tenderer or his identified Sub Contractor should possess valid Electrical License for executing building electrificatio works and should have executed similar electrical works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year
Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year
Owning the following key and critical equipment for this work (xxxx, xxxx, xxxx)
Liquid assets and /or availability of credit facilities of no less than Rs. xxxxxx Lakhs (estimated cash flow for 3 months of peak construction period)
Total value of civl engineering works executed and payments received in the last five years (year-wise)
List of existing commitments and ongoing works
List of works for which tenders already submitted
Banker Details for reference
Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded
Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years
Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded
List of Financial Resources with Certificates
3.2 (b) Satisfactorily completed (at least 90% of the Contract value) during the last five years i.e. 2020-21 to 2024-25, as prime contractor, at least one similar work such as Construction of Barrage/BCB of value not less than Rs. 120.52 Lakhs. Cost of completed works of previous years will be given weightage of 10% per year to bring them to 2025-26 price level (With Indent No.)
3.2 (c) Executed in any one year, during the last five years i.e. 2020-21 to 2024-25, the following minimum quantities of work 1. Earthwork in both Excavation & Embankment (Combined Quantity):9551.00 Cum 2. Cement Concrete (Including RCC & PSC):1626.00 Cum 3. Steel works for RCC (Reinforcement Steel):38.711Tonne 4. Structural Steel : 5.350 Tonne 5. Pitching/Revetment :96.00 Sqm
List of Existing Commitments and ongoing works in all departments
Section 3 Qualification Information as per bid document
3.6 Tenderers who meet the specified minimum qualifying criteria will only be qualified, if their available tender capacity is more than the total tender value. The available tender capacity will be calculated as under: Assessed available tender capacity (AxNx1.5-B), Where A is Maximum value of civil engineering works executed in any one year during the last five years i.e.2020-21 to 2024-25 (updated to 2025-26 price level) taking into account the completed as well as works in progress. N is Number of years (0.75 years) prescribed for completion of the works for which tenders are invited. B is Value, at 2025-26 price level, of existing commitments and ongoing works to be completed during the next 0.75 years (09 Calendar months) Note: The statements showing the value of existing commitments and ongoing works as well as the stipulated period of completion remaining for each of the works listed should be countersigned by the Employer in charge, not below the rank of an Executive Engineer or equivalent.
The tenderer shall be eligible Class-II & Above KPWD Registered contractor
3.2 (a) Achieved in at least TWO financial years during the last five years (i.e 2020-21 to 2024-25) an average annual financial turnover (in all classes of civil engineering construction works only) of Rs. 482.06 lakhs. Financial turnover of previous years will be given a weightage of 10% per year to bring them to the price level of the FY 2025-26
3.3 (b) liquid assets and /or availability of credit facilities of not less than Rs.105.57 Lakhs (Credit lines/ letter of credit/ certificates from banks for meeting the fund requirement etc., Bankers certificate should be in prescribed format without which the bidder is liable to be rejected)
₹5,000
₹3.6 L
12 Jan 2026
12 Jan 2026
23 Jan 2026
21 Jan 2026
20 Jan 2026
Construction of BCB Across Local Nala Near Konalli Village in Wadgera Taluka Yadgir District (Under 4702 APB for the year 2025-26)
BCB: Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unservice...
Cutting and removing jauliflora bushes upto 1.50 m girth excluding removal of stumps and including burning or disposing off the materials Etc. Complete with All lead and Lifts, as per the Directions o...
Cutting and removing jauliflora bushes above 1.50 m upto 3.00 m girth excluding removal of stumps and including burning or disposing off the materials Etc. Complete with All lead and Lifts, as per the...
Providing and placing sand bags consisting of empty cement bags filled with 35 to 40 kg locally available sand for forming ring bund including cost of all materials, labour, plugging joints with selec...
Filling clayey soil between two rows of sand bags placed for forming ring bund including cost of all materials, labour, tamping, plugging leakage points and all other ancillary operations Etc. Complet...
Earth work excavation for Foundation by mechanical means in all kinds of soil up to 3.00 m depth for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, sho...
Earth work excavation for foundation by mechanical means in in ordinary/ soft rock without blasting upto 1.5 m depth for all works & depth upto 3 m, as per drawing and technical specifications, includ...
Providing and fixing 25 mm dia 3 m long cold twisted deformed steel dowel bars with one end driven into 38 mm dia 1.50 m deep hole drilled in bed rock and other end provided with L-bend for embedding ...
Providing and laying in position cement concrete M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates for all Foundation works. The granite/ trap/ basalt crushed graded coarse aggr...
Providing centering, shuttering, formwork, scaffolding, Etc. Complete with All lead and Lifts, as per the Directions of Engineer-in-Charge.
Providing and laying in position cement concrete M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates for all Sub structures of building, Irrigation works, Sub structure works of b...
Providing centering, shuttering, formwork, scaffolding,Etc. Complete with All lead and Lifts, as per the Directions of Engineer-in-Charge.
Providing and laying in position cement concrete M25 design mix using 20 mm nominal size graded crushed coarse aggregates for all Super structures of building, Road works, Water works, Irrigation work...
Providing centering, shuttering, formwork, scaffolding, Etc. Complete with All lead and Lifts, as per the Directions of Engineer-in-Charge.
Providing and forming expansion joint for spillway bridge consisting of 75 x 75 x 6 mm angles 2 numbers provided with 250 mm long 12 mm dia. anchors fixed to both flanges at 150 mm c/c and 140 x 6 mm ...
Supplying, fitting and placing TMT FE550/ 550D steel reinforcement for foundation of bridges including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, lap...
Providing rubble/ boulder and sand filling behind abutment and return walls in layers including cost of all materials, labour, watering, ramming and all other ancillary operations Etc. Complete with A...
Providing and constructing 75 mm dia PVC pipe weep holes for concrete/ masonry walls including providing 200 x 200 x 200 mm size porous concrete block made of cement and 20 mm down coarse aggregate in...
Design, fabrication, supply, erection and commissioning of embedded parts consisting of sill beam, wheel tracks, seal seats, guide rails etc., with all accessories for vertical lift barrage gate inclu...
Design, fabrication, supply, erection, testing and commissioning of sliding type interchangeable stoplog gate elements consisting of skin plate, stiffeners, horizontal and vertical girders, lifting ho...
Providing casing embankment using semi-pervious/ pervious approved soil from borrow areas in layers of 250 to 300 mm (before compaction) including cost of all materials, machinery, labour, all other o...
Providing and constructing 300 mm thick rubble stone pitching set in CM 1:5 proportion by volume with pin headers at 2 per m2 including cost of all materials from approved source, labour, packing ston...
Godown Building: Earth work excavation for Foundation by mechanical means in AKS up to 3.00 m depth for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, ...
Providing and laying in position cement concrete mix 1:3:6 Using 40 mm nominal size graded crushed coarse aggregates for levelling course for all works in foundation. The granite/ trap/ basalt crushed...
Filling approved earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and ...
Providing random rubble masonry with hard stone in foundation and plinth including leveling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upt...
Providing and laying in position cement concrete M20 design mix using 20 mm nominal size graded crushed coarse aggregates for all foundation works. The granite/ trap/ basalt crushed graded coarse aggr...
Providing centering, shuttering, formwork, scaffolding, etc for footing @ 3% Etc. Complete with All lead and Lifts, as per the Directions of Engineer-in-Charge.
Providing brick work with common burnt clay Non Modular bricks of class designation 3.5 in foundation and plinth in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour...
Providing and laying in position cement concrete M20 design mix using 20 mm nominal size graded crushed coarse aggregates for all Super structures of building, Road works, Water works, Irrigation work...
Providing centering, shuttering, formwork, scaffolding, etc for column @ 70% Etc. Complete with All lead and Lifts, as per the Directions of Engineer-in-Charge.
Providing centering, shuttering, formwork, scaffolding, etc for beam & lintel @ 60% Etc. Complete with All lead and Lifts, as per the Directions of Engineer-in-Charge.
Providing centering, shuttering, formwork, scaffolding, etc for slab @ 50% Etc. Complete with All lead and Lifts, as per the Directions of Engineer-in-Charge.
Providing centering, shuttering, formwork, scaffolding, etc for chajja @ 45% Etc. Complete with All lead and Lifts, as per the Directions of Engineer-in-Charge.
Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on spec...
Providing and fixing MS grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel w...
Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90L/10 m² over an under coat of primer applied @ 0.80 L/10 m² of approved brand and manufacture includ...
Supplying, fitting and placing TMT FE550/ 550D steel reinforcement for buildings including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, lapping/ weldin...
Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removi...
Providing and laying cement concrete flooring 40 mm thick with 20 mm nominal size stone aggregate using 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat ...
Providing White washing with lime to give an even shade :New work (three coats) with lime of approved quality, including cost of materials, labour complete as per specifications and Etc. Complete with...
APPROACH ROAD: Earth work excavation for Foundation by mechanical means in AKS up to 3.00 m depth for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, sh...
Construction of Embankment by excavating the available approved Gravel/ Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading...
Earth work excavation for Foundation by mechanical means in In ordinary/soft rock without blasting up to 1.5 m depth for all works & depth upto 3 m, as per drawing and technical specifications, includ...
Providing and laying 750 mm dia reinforced cement concrete pipe NP3 for culverts on first class bedding of granular material in single row including fixing collar with cement mortar 1:2 but excluding ...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
Technical Bid_WORK_INDENT_9739.doc
Others - TECHNICAL BID FORMAT • 0.12 MB
Detailed_Specification.doc
Others - SPECIFICATIONS • 0.78 MB
bid_document_ 9739.doc
Tender Document • 21.66 MB
Konalli Anicut Drawings.pdf
Others - DRAWINGS • 1.25 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .