Annual repair and Maintenance of SASB Qtrs. 08 no Huts by way repairs to damaged roofs and walls, washrooms and drainages etc and other civil works at Srinagar

Amount

Engagement of labours for site clearence by way of bush cutting removal of vegetation / collection of sapplings etc . Including disposal of rubbish up to normal lead

Dismantelling of CGI / PPGI sheets / fencing etc. from existing damaged spots including stacking of material at appropriate place and or fixing of available sheets / pannels at various spots of quarter site.

Providing and laying in position cement concrete of specified grade excluding cost of centering and shuttering all works upto plinth level Mud mate in 1:4:8 using 20 mm nominal size crushed aggrigates.

Providing and laying in position cement concrete of specified grade excluding cost of centering and shuttering all works upto plinth level Mud mate in 1:3:6 using 20 mm nominal size crushed aggrigates for bases of toilet and other spots etc

Providing and fixing precoated galvanized iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness fixed with required nuts, bolts and secrews etc complete

Engagement of Skilled labours like Black smith. Carpenters , Plumbers , Electrician. Etc. for repairs / restoration of damaged works of various nature (annual maintence )

hire charge of welding set genset welding rods and P.O.L for repair works

Providing and fixing of PUF Pannels 50 mm thick fof outer walls of huts in place of damaged CGI Sheets .

Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board (conforming to IS: 12823 Grade-I type-II) in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in charge. Pre-laminated particle board with decorative lamination on both sides.

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete. using 600 x 600 mm tiles

Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections /appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia. and size including necessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber / neoprene gasket felt etc. Aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge (glazing, panelling and dash fasteners to be paid for separately.) Powder coated aluminum (minimum thickness of powder coated 50 microns)

Providing and fixing glazing in aluminum door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer in-charge. (Cost of aluminum snap beading shall be paid in basic item.) With floating glass panes of 4.0 mm thickness (weight not less than 10.00 kg / sqm)

Providing and fixing white vitreous china pedestal type (European type/wash down type) water closet pan.

Providing and fixing P.V.C low level flushing cistern with manually controlled device (handle lever) conforming toIS: 7231, with all fittings and fixtures complete: 10 litre capacity -White

Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete: White solid plastic seat with lid.

Providing and fixing C.P. brass angle valve for basin mixer and gyser points _of approved make conforming to IS : 8931 15 mm nominal bore

Providing and fixing C.P. brass bib cock of approved quality conforming to IS : 8931 15 mm nominal boref

Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto1 metre long with S.S. triangular plate to European type W.C. of quality and make as approved by Engineer - in - charge.

Providing and fixing un plasticized PVC connection pipe with brass unions 45 cm long 15mm N. bore

Providing and fixing G.l. pipes complete with G.l. fittings excluding trenching and refilling etc. (external work)

Supply and fixing of PVC Pipes 110mm dia B-type

Supply and fixing of PVC Bends 110mm dia B-type

Supply and fixing of PVC Tee 110mm dia B-type

Supply and fixing of PVC Collar 110mm dia B-type

Supply and fixing of exhaust fans 10''x10'' size Havells

Supply and fixing of Ceiling fans 1200 mm Havells

Supply and wire for repair work 1.5 sqmm

Carriage of all material from source to site of work by mechanical transport including loading / unloading and stacking all complete.

Structural steel work welded in built of sections including priming coat complete.

Supply and fixing of electical items in walls including cutting the walls etc and fixed the item in proper position (all complete)

RAJA WASEEM AHANGER

AB MAJEED LONE