STMC-For 3 nos of roads for a length of 30.0 km under Khordha( R and B) Division, Khordha(Package No-1)

A. Short Term Maintenance Contract (STMC) estimate from 0/00 to 5/00 Km of Kuradhamal to Kaipadar Road in the state of Odisha for the year 2026-27 Flank dressig to proper camber including all cost, conveyance, taxes, labour, T&P etc. complete as per direction of the Engineer-in-charge.

Scraping claning the road surface applying tack coat using 3.0 kg of bitumen for 10 Sqm and laying 75 mm (BUSG) thick Built up Spray Grouting two layers 37.5 mm thick each layer using 0.45 cum 25 mm to 40 mm size hard granite broken metal and 12.00 kg penetration grade of bitumen for 10 Sqm in each layer with 0.12 cum of 12 mm size hard granite broken chips as key stone for 10 Sqm spreading over and laying including heating, pouring and spreading bitumen, metal and chips and rolling with P.R.R. including hire and running charges of P.R.R. and all other machineries and including cost, conveyance, royality, taxes of all materials i.e. metal, chips, bitumen and all other T&P materials etc. complete as per specification and direction of Engineer-in-charge.

Scraping claning the road surface applying tack coat using 3.0 kg of bitumen for 10 Sqm and laying 37.5 mm (BUSG) thick Built up Spray Grouting in one layer using 0.45 cum 25 mm to 40 mm size hard granitebroken metal and 12.00 kg penetration grade of bitumen for 10 Sqm with 0.12 cum of 12 mm size hard granite broken chips as key stone for 10 Sqm spreading over and laying including heating, pouring and spreading bitumen, metal and chips and rolling with P.R.R. including hire and running charges of P.R.R. and all other machineries and including cost, conveyance, royality, taxes of all materials i.e. metal, chips, bitumen and all other T&P materials etc. complete as per specification and direction of Engineer-in-charge.

Providing, Laying, spreading & compacting graded stone aggregate of to wet mix macadum W.M.M. specifications including premixing material with water at OMC in mechanical mix plant and carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub-base/base course on well prepared surface and compacting with VRR to achive the desired density as per Clause 406 of MoRT&H specifications for Road & Bridge Work (5th Revision).

Construction of embankment with approved materials obtained from borrow pits with all lifts and leads transportating to site within a lead of 5km and spreading grading to required slope and compacting to meet reqirement of table 300-2 and Clause-305 of MoRT&H specifications for Road & Bridge Works (5th Revision).

Providing and Applying Tack coat with bitumen emulsion using emulsion presure distributor @ 0.20kg / sqm on the prepared bituminous/granular surface cleaned with mechanical broom as per Clause 503 of MoRT&H specifications for Road & Bridge Works (5th Revision).

Providing and Applying Primer Coat with bitumen emulsion on prepared surface of granular base including cleanig the road surface and spraying primer @ 0.60kg per sqm using mechanical means as per Clause 502 of MoRT&H specifications for Road & Bridge Works (5th Revision).

Providing & Laying Bituminous Macadam of Grade-II using crushed stone gr-II materials & 60/70 penetration grade of bitumen preparing preemixed materials with bituminous binder with hot mix plant, transported to site, laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled to achieve the desired compaction as per clauses 501 and 507 of MoRT&H Specification for Road & Bridge works (5th revision) including cost conveyance, royality & other taxes of materials, cost of labour, machinery, T&P etc complete.

Providing & Laying Bituminous Concrete Grade-II using crushed stone gr-II materials & CRMB-55 grade of bitumen preparing preemixed materials with bituminous binder with hot mix plant, transported to site, laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled to achieve the desired compaction as per clauses 501 and 507 of MoRT&H Specification for Road & Bridge works (5th revision) including cost conveyance, royality & other taxes of materials, cost of labour, machinery, T&P etc complete.

Finishing the wall surface with white washing two coats of any approved shade on new work 2 coats to give an even shade including cost of weather coat all cost of all labours and T&P etc. complete .