Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹32.2 LAccepted-AOC 0 NERTHUA RAEBARELI UTTAR PRADESH 229103 | RAE BARELI | UTTAR PRADESH | 229103 | L1 | Accepted-AOC BEING LOWEST | |
| 2 | L2₹33.0 L+₹2,794.59 (0.08%)Rejected-AOC 1001 63 SHALIMAR GARDEN ISMAILGANJ NEAR INDIRA NAGAR SECTOR 08 CROSSING LUCKNOW 226016 | LUCKNOW | UTTAR PRADESH | 226016 | L2 | Rejected-AOC NOT BEING LOWEST | |
| 3 | L3₹33.8 L+₹85,023.24 (2.58%)Rejected-AOC AT POST ARANGAON MEHERABAD TAL DIST AHMEDNAGAR PIN 414006 | AHMEDNAGAR | AHMEDNAGAR | MAHARASHTRA | 414006 | L3 | Rejected-AOC NOT BEING LOWEST | |
| 4 | L4₹34.7 L+₹1.7 L (5.27%)Rejected-AOC | L4 | Rejected-AOC NOT BEING LOWEST | |
| 5 | L5₹37.0 L+₹4.0 L (12.2%)Rejected-AOC | L5 | Rejected-AOC NOT BEING LOWEST |
Tender Value
₹34 L
EMD Value
₹68,000
Closing Date
31 Jul 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE AF LOHEGAON
GE AF LOHEGAON LOHEGAON PUNE-411032
PROVN OF SINKS AND ASSOCIATED WORKS IN SMQS AND ADDN/ALTN TO CERTAIN BILLETS AT AF STN PUNE(PH-II) UNDER GE AF LOHEGAON
2023_MES_607763_1
8729
Open Tender
Civil Works
Item Rate
180 days
GE AF LOHEGAON
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
Yes
GE AF LOHEGAON
₹68,000
Yes
2 Nov 2023
3 Jul 2023
7 Aug 2023
3 Jul 2023
31 Jul 2023
18 Jul 2023
Amount
Dismantling Stone slabs and tiles of any description or thickness in floors, aprons etc. liad in any type of mortar all as specified and directed.
Dismantling floor hearth and wall tile incl cement mortar bedding, remove serviceable tiles to store and rubbish off the premises
Demolition of cement concrete (un-reinforced) in ground floors and pavings not exc 15 cm thickness (below or above ground level) complete all as specified and directed.
M & L cement concrete type B0 1:2:4 (12.5 mm graded agg) 25mm thick as in sub floors complete all as specified and directed.
M & L for machine cut kota stone slab flooring 20-25mm thick over cement screed bed laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including Screed Bed 20 mm thick in Cement Mortar (1:6) including rubbing and polishing complete.
M&L kota stone slab 20-25mm thick in riser of steps skirting, dado and pillar laid over cement screed and jointed including 10mm thick rendering in CM (1:3)complete all as specified and directed by the Engineer-in-Charge.
M&L for non skid ceramic coloured tiles 7to 8mm thick (square/rectangular) area of each tile exceeding 0.11sqm and n exc 0.18sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match and over and including 15 mm thick screed bed in cm 1:6 for complete all as specified.
All as per Item No 07 above but as in skirting/dados over and including backing coat of 10mm thick rendering in CM 1:4 complete all as directed.
M&L for Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile over and including 15 mm thick screed bed in CM (1: 6) complete all specified and directed.
M&L for glazed coloured ceramic tiles in vertical surfaces 350x250x7mm/ 450x350x7mm/300x200x7mm thick set and jointed in net cement slurry and pointed with white or colour cement to match and over and including backing coat of 10mm thick rendering in cm 1:3 for complete all as specified.
M & L for Rubber moulded glossy finish Chequered cement concrete tiles 20cm x 20cm x 25mm/30cmx30cmx25cm thick, set, jointed and pointed in neat cement slurry over a 15mm thick screed bed in CM (1:6) in floors all as specified and directed.
M& L for rubbing and mirror polishing for existing kota stone flooring etc complete all as specified and directed.
S & F in repair aluminum snap grid powder coated frame work for false ceiling, size of grid 605 x 605mm along with 4mm dia mild steel wire class 3 as in suspenders complete all as specified and directed by Engr-in-Charge.
Providing and fixing Gypsum Board 12mm thick in ceiling fixed with screw as per manufacturers instructions
M & L for complete removal of existing treatment of walls plastered or unplastered, Washing, rubbing down and stopping of distempered and painted surfaces and applying two coats of distemper oil emulsion over a coat of alkali resistant primer including making good the surface complete all as specified and directed.
M&L for complete removal of existing treatment plastered or unplaspered old decorated surfaces of walls including brooming down or steel wire brushing, rubbing using Emery paper etc, and applying two coats of cement base paint on walls all as specified.
M&L for preparation of old painted wooden surfaces of any description over 10cm in width or girth and applying one coat of synthetic enamel paint white or any different tint ,complete all as specified.
M&L for preparation of old painted wooden surfaces of any description n.exc. 10cm in width or girth and applying one coat of synthetic enamel paint white or any different tint ,complete all as specified.
M & L for Preparation of new wooden surfaces of any description having width/girth exceeding 10cm and applying two coat of synthetic enamel paint over pink primer for material and labour complete.
Taking down cement plaster on brick or concrete wall etc including racking out joint hacking for key, scrubbing down with water etc. complete all as specified and as directed by engr-in-charge.
M&L 10 mm thick plastering in cement mortar 1:6 brick or on concrete surfaces of wall and finishing the surfaces fair and even without using extra cement all as specified and directed all as specified and directed by engr-in-charge.
M&L for 15mm thick rendering in CM (1:4) on external surfaces of brick work finished even and smooth without using extra cement, complete all as specified and directed.
M & L for 5mm thick cement plaster in CM 1:3 on ceiling surface fair faces of brick or concrete surfaces and finishing the surface even and smooth (without using extra cement) etc.
M & L for 10mm thick cement plaster in CM 1:4 on fair faces of brick or concrete surfaces and finishing the surface even and smooth (without using extra cement) etc.
M & L for preperation of newly plastered surfaces of ceilings and applying three coats of white wash complete all as specified and directed.
- ditto - all as per item No. 25 above but on walls.
M & L for prepartion of newly plastered surfaces and priming plastered surfaces with alkali resistant primer and applying two coats of oil bound distemper on walls over 3mm thick putty complete all as specified and directed.
M&L 20mm thick plastering in cement mortar 1:6 on stone masonary surfaces of wall applying 10mm each coat and finishing the surfaces fair and even without using extra cement all as specified and directed by engr-in-charge.
M & L for Preparation of old plastered surfaces/un plastered surfaces including brooming down with steel wire brushing scrapping down smoke spout moulds, moss and efflorescence, salt treating oil and greasy spots etc and applying two coat of white washing on old plastered surfaces of walls all as specified.
Excavation in trenches not exc 1.5 mtr wide and not exc 1.5 mtr in depth for foundation and getting out in Hard/dense soil.
Demolition and breaking up drain pipes SGSW pipe including fittings and packing ,hunching and bed concrete complete of the size 100mm internal dia of SGSW pipe complete all as specified and directed.
Demolition and breaking up drain pipes 150mm internal dia of RCC pipe including fittings and packing, haunching and bed concrete complete all as specified and directed.
Demolition of brick work or PCC blocks/stone masonary built in cement mortar including coping of manholes/drain complete all as specified and directed.
M/L for PCC precast solid block masonry walling (1:3:6) Grade C1 exc 10cm width /girth in CM (1:6) all as specified.
M&L for 100 mm thick cement concrete Type B-2, 1:2:4 (using 40mm graded stone aggregate), as in mass concreting,footing , etc, and finished the cement concrete surfaces even and smooth with out using extra cement, complete all as specified and as directed.
M & L for RCC 1:2:4 type B1 as in band and lintel and as staging ,slab using 20mm graded stone aggregate, complete all as specified and as directed
M&L for mild steel TMT bars 10mm dia and over, cut to lenth , bent to shape required , including cranking , bending spirally for hooping for columns , hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips.complete all as specified and as directed
M&L for flat formwork to soffits of suspended slabs of rough finished of concrete such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified & directed
M/L for PCC (1:3:6) type C2 concrete bed to drain pipes of dia 100mm dia including packing under and haunching against the sides of pipes after they laid and tested.as reqd on ground condition.
M/L for PCC (1:3:6) type C2 concrete bed to drain pipes of dia 150mm dia including packing under and haunching against the sides of pipes after they laid and tested.as reqd on ground condition.
S&F 100mm bore salt glazed stone ware drain pipes Grade A laid in trenches and joined complete all as specified and directed.
S&F for Reinforced concrete pipes class NP-2, laid and jointed complete with collars if required for 150mm dia pipes.complete all as specified and directed.
Returning, filling in including spreading, leveling , watering and well ramming in layers not exc 25 cm in any statra complete all as specified and directed.
Removing excavated in any statra to distance not exc 50m and depositing where directed at a level n. exc 1.5m above the starting point complete all as specified and directed.
S&F in repair for PVC (SWR) floor trap 100mm dia with grating including jointing with solvent cement in to waste pipe fixed in cement concrete 1:2:4 type B-1 complete all as specified and as directed.
Forming jambs, etc, to openings (to foregoing item), including cutting, tooting and properly bonding into work, also facing, jointing and pointing to match existing work in CM (1:4), complete all as specified and directed.
Hacking out old broken glass (any thickness ,size ,quality or description ) from wooden frames or stone ,concrete or brick surrounds ,glazed with putty or fixed with beads.
S&F 3.0 mm thick sheet glass, ordinary quality and glazing with oil putty in squares n exc 0.5 sq mtr in each pane complete all as specified and as directed.
S & F Galvanised mild steel wire cloth 0.63 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and as directed.
S & F in repairs Galvanised steel wire cloth 0.63 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and as directed.
S &F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded all as specified and directed.
S & F Steel windows or ventilators, fixed type, with glazing bars all as specified and directed.
Taking down chowkat with shutter without taking out shutter from the frame exc 1.5 and n.exc 4 Sqm each
Taking down chowkat with shutter without taking out shutter from the frame n.exc 1.5 Sqm.
Taking down Shutters of description exc 1sq.m and n exc 2 sq. m each complete all as specified and as directed.
M & L for Factory made of 35 mm thick glazed and skeleton shutters made of 2nd class hard wood, open rebated and prepared to receive glass gauge edges of framing plain chamfered or rounded , fitted with cut and mitred beads for securing glass etc for window, ventilator shutters, etc. as specified in SSR Part I, Section 8 clause 8.24(b) and fitted to chowkhat complete all as specified and directed .
M & L for 2nd class HW 35mm Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneeringon both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated etc all as directed and specified .
M & L for Factory made of 30 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides: supplied and fitted to chowkats complete all as specified and directed .
S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as directed .
Supply and fix for solid PVC door frame of size 50mm x 47mm, made out of 5 mm thick plain colour PVC sheet, reinforced with mild steel square tube complete all as specified and as directed.
S & F 100 mm size butt hinges, medium weight, cold rolled mild steel complete all as specified and as directed.
S & F 75 mm size Butt hinges, heavy weight, cold rolled mild steel, and fixed all as specified and directed.
S & F 150 mm long Aluminium anodised, barrel tower bolts of extruded section complete all as specified and as directed.
S & F 150 mm size Aluminium handles, Extruded aluminium alloy handles, fabricated type, anodised complete all as specified and as directed.
S & F 250 mm long Aluminium sliding door bolt, plate type, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and as directed.
S & F Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, overall length 150 mm fixed in floor complete all as specified and as directed .
M & L for 105mm x 60mm Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed all as specified and directed.
S&F second class hardwood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered put together with glue pinned at joints complete all as specified and as directed.
S&F Tubular towel rail 20mm dia 600mm long CP including brackets complete all as directed
S & F in repair PVC low level flushing system plastic valve with inlet ball valve float chain and ball (of capacity 10 liters) ISI Marked incl 32mm PVC flush pipe complete all as specified and directed.
S&F in repair 15 mm dia CP brass PVC connection 60 cm long including check nuts etc complete all as specified and directed
S&F in repair vitreous china, squatting pan of 'Orissa' pattern, long pan, size 580 mm x 440 mm, white, with 'P' of 'S' Trap, front or back inlet and foot rests any pattern, including concrete bedding complete all as specified and as directed.
S&F in repair Vitreous China half stall urinals bowel type (flat back or corner wall type) of size 465*355*265mm complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 secuing urinal to plugs with and including 60mm long brass screws pointing around urinal back in cement, with brackets flush pipe grating and union fo dischage pipe (excluding of fixing supply pipe to flushing cistern, trap) including waste pipe
S&F in repair vitreous china wash hand basin, white, 550 mm x 400 mm flat back, including providing CI brackets, CP Pillar Tap, PVC waste pipe 32mm dia, chromium plated, brass, waste coupling, iincl 32 mm dia all as specified and as directed.
Taking down steel tubing 15mm and connection including cleaning for refixing or removal to store.
S&F tubes medium grade galvanised with all fitting and fixed to wall or laid in trenches 15 mm bore
Fixing only tubes medium grade galvanised with all fitting and fixed to wall or laid in trenches 15 mm bore
Taking down steel tubing 20mm and connection including cleaning for refixing or removal to store.
S&F tubes medium grade galvanised with all fitting and fixed to wall or laid in trenches 20 mm bore
Fixing only tubes medium grade galvanised with all fitting and fixed to wall or laid in trenches 20 mm bore
Cutting of existing steel tubing for alternation or addition of 15m m dia pipes all as specified and directed.
Cutting of existing steel tubing for alternation or addition of 20m m dia pipes all as specified and directed.
Cutting chases pinning in making good to facing where required for concealed water tubing and making good cutting not xc 10 cm girth in stone/concrete walls complete all as specified and directed by Engr-in-Charge.
S&F Rotational moulded water storage tank (cylindrical/vertical/or flat type) with closed top pf capacity 1000 ltrs hoisted and fixed in position on the platform with all connection such as inlet, outlet, airvent, overflow etc complete all as specified and directed by Engineer-in-charge.
S & F in repair Gun-metal, globe or gate valves, with iron wheel head, screwed bothends for iron pipe 20 mm bore and fixed
S&F Ball brass valve , high pressure , with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed of size 25mm complete all as specified and directed by Engineer-in-charge
M&L in repair for 15 mm bore bib tap chromium plated cast copper alloy with wall flange complete all as specified and directed.
S & F in repair angle valves fancy , cast copper alloy,screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed.
S&F in repair consealed type with long shank and cup stop valve, cast copper alloy, screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipes or for union of 15mm dia size complete all as specified and directed by Engineer-in-Charge
S &F in repair Brass chromium plated shower rose 125mm size with or without swivel joints, any size, including fixing to steel pipe or union all as specified and directed.
S&F CP soap case all as specified and directed .
S&F in repair pvc SWR floor trap of diameter of outlet 75mm including jointing to waste pipe fixed in cement concrete type B1 (1:2:4).
M&L(SWG) gulley trap 100mm setting and jointing with solvent cement.
S & F Towel Ring of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90gms) all as specified and directed
Demolition and breaking up drain pipes (Salt glazed ware /PVC/ AC or Reinforced concrete) set in cement mortar
S&F 75mm dia PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints fixed to walls
-do- as above Item No. 97 , but 110mm dia
M&L for PVC (SWR) bends of any radius with oval and access door of 75mm dia
-do- as above item No. 99, but 110mm dia
S &F 110mm dia of PVC (SWR) branch piece, single (Double Y) equal or unequal all as specified and directed.
M&Lfor PVC (SWR) vent cowl of 110mm dia
S &F Anodised aluminium frame of standard section for doors, windows, ventilators and partitions with double rebates including joining cleat for fixing etc. complete all as specified
M& L for 12mm thcik prelaminated particle board, interiror grade, prelaminated on side with decorative choice laminationa and other side balancing white lamination fixed with screws to timber work all as specifed and directed.
M&Lfor Powder coated aluminium door shutters, aluminium sections weeighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, anodised aluminium snap beading, screws,hinge type B-21 100mm long (3 no.) suitable handle (2 no.) (Glass / Wiremesh should be measured seperately) complete all as specified
M&Lfor Powder coated aluminium window and ventilator(lovered) shutters, side hung type without sash bars/Sliding track type with locking device aluminium sections weeighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fitings such as peg stays 150mm long (1 no.) hinge type B-21 100mm long (2 no.) suitable handle (1 no.) (Glass / Wiremesh should be measured seperately)complete all as specified
Dismantling structural steel work including doors, gates but excluding framed truss etc.
S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165
Taking down unserviceable rolling shutter and collapsible steel gate complete all as specified and directed.
S &F steel rolling shutters, lath thickness 1.25mm ,without ball barings, as specified including top cover anchoring rod, hasp and staple and one shop coat of primer etected in position as indicated complete push pull or manual type all as specified and directed.
Supply only Safety lever locks mild steel with 4 levers for rolling shutters all as specified and directed.
S& F collapsible steel gates, top hung, consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc as specified erected in position and securing runners with hold fast and brackets complete all as specified and directed.
S&F in repair Plain mild steel wire 2.5mm, galvanised class 3, in fencing including straining and fixing to wood, concrete or steel posts and/or to straining bolts, including securing with and provision of galvanised iron tying wire, galvanised iron staples or steel pins, etc.in detached work such as for mosquito nets and fixing to straining bolts, hooks, eyes, etc as directed (each line of wire to be measured)
Removing building materials etc. (other than spoil payable under items 03028 to 03031 in Section-3—Earthwork) to a distance of 500m or under, beyond the lead included in the rates, including loading, unloading and stacking at the destination complete all as specified and directed
Dismantling of PVC water tanks of exc 250 and n.exc 500 ltr capacity and removing to store and all as specified and directed by Engr-in-Charge.
S&F rotational moulded polyethylene double layer water storage tank 500 Litres capacity ISI marked (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Pt-I with 25 mm ball valve high pressure PTMT with rod & high density plastic ball complete all as specified and directed by Engineer-in-Charge.
S&F Sink made of stainless steel with drainage board1mm thick kitchen or laboratory with plug washers and waste including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe over all size 915x460mm bowl size 410x330x160mm complete all as specified and as directed
S/F 32mm bore waste fittings, brass chromium plated for glazed sinks with long screwed shanks and forming flange and bedded in cement and other end fixed.
M&L machine cut cudappah stone slab 20-25 mm thick complete all as specified and directed
Cutting holes Exc. 150 sq.cm.but n.exc.400 sq.cm. in brick walls built in lime mortar and stone walls built in mud mortar and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-l as required
M&L for Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in CM 1:6
Taking down the existing surface batten type point wiring of aluminium for Light, fan, Sockets, power sockets, stair case light point complete with switch socket regulator , bracket fitting etc and making good disturbed surfaces for wall, floors etc as directed by Engr- in charge.
Taking down cearfully by unscrewing the unserviceable DB Boxes, MC distribution boards SP & TPN with porcelain cutouts etc all as directed.
Taking down the sub main wiring of any dia / sq mm on teak wood batten / PVC conduit GI earth wire all as directed.
Material and labour for providing point wiring with two runs of 1.5 Sqmm multi stranded copper conductor FRLSH PVC insulated single core 1100 volts grade & with one run of 1.5 Sqmm single core multi stranded copper conductor FRLSH PVC insulated 1100 Volts grade wire for continuous earthing complete in and including PVC casing and caping with all fittings/fixture etc and open recessed type Plastic Enclosure( Plastic Switch Board ) ISI Marked (IS:14772) for housing switches / sockets all a specified and directed (a) One light point/Bell point controlled by one switch .
(b) One Fan point controlled by one regulator/switch.
(c) One 3 pin socket 5 A on independent board.
(d) One 3 pin socket 5 A on the same switch board.
All as per item No126.01 here-in-before but with cable size 2.5 Sqmm for one 5 pin 15 Amps socket outlet on independent board incl multistranded insulated copper earth contunuity conductor of size 2.5 Sqmm all as specified and directed by Engineer-in-Charge.
Supply and fix Socket out let 2in 1, 5 pin 5 Amp
Supply and fix switch socket combination 2 in 1, 5 A flush type.
Supply and fix switch socket combination 5 / 16 A, 5 in 1, flush type.
Supply and fix switch piano flush type 5 Amp one way. complete all as specified & directed
S/F Fan Regulator electronic step type complete as directed
S&F angle / batten holder insulated body with back plate for batten fittings
Supply and fix ceiling rose surface type bakelite / PVC three terminal 65 x 50mm.
Supply and fix high quality indoor Surface and wall mounted LED batten 20 Watt, extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffuser & integrated electronic driver with industrial grade heavy duty driver having THD<10%. complete with all accessories internally pre-wired and including connecting up with three core 0.5 Sqmm flexible copper conductor cable ceiling rose to fitting terminal.
Supply & Fixing LED luminaire 600 mm x 600 mm 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp sitable for roof ceiling including connecting up with driver three core flexible copper codctor cases of suitble size complete.
Supply and fix sheet metal enclosure MCB DB double door SPN 8 way 230 V with neutral link and with 200 A bus bar
Supply and fix MCB SPN 240 V, 40 to 63 Amps. complete all as directed at site.
Supply and fix MCB SP 240 V ,5 to 32 Amps complete all as directed at site.
M/L for sub main wiring with two runs of single core 6.0Sq mm Flame retardant PVC insulated unsheathed multi stranded copper conductor 1100 V grade with colour code and one run of 6.0 Sq mm single core Flame retardant PVC insulated unsheathed multi stranded copper conductor green colour cable as earth continuity conductor drawn in & including casing & caping all as directed and specified . ( Note:- Two runs of 6 Sqmm copper cable & one run of 6 sqmm copper cable including PVC casing & caping shall be measured & paid as one length )
Supply and fix exhaust fan, steel bodyAC single Phase. 230V of size 300msweep with, blades, and frame and louvers.
M&L for cutting wall for exhaust fan opening , the cutting mist be of suitable dimension to accommodate the exhaust fan and make good surface finish with cement plaster work complete all as specified and directed by Engr-in-Charge
M/L for providing earthing complete with galvanised steel earth plate electrode 600 mm x 600 mm x 6mm thick buried directly in ground earth pit not less than 2.25 Mtr deep below ground level with top edge of the plate not less than 1.5 Mtr below normal ground level connected to galvanised earth lead wire 4.00mm dia by means of bolts, nuts, checknuts & washers of GI or steel and connecting to earth dolly all as shown in electrical plate No. 3 of SSR Part I of 1991 & testing complete including 15mm dia light grade GI pipe upto 7.5mtr long, excavation in any type of strata, PCC ( 1:3:6 ) type C1 earthing chamber, pre cast slab 50 mm thick in cement concrete ( 1: 2 : 4 ) type B 1 ( reinforced with welded steel wire fabric (XPM) weight not less than 4 Kg / Sqm with frame, test box , funnel, wire mesh with GI watering pipe etc.
Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete.
RK ENTERPRISES
Smruti Construction
SHAH BUILDERS
N AND G CONSTRUCTION
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .