CLEANING AND REPAIR AND REPLACEMENT OF SEWAGE LINE, SEPTIC TANK AND SOAKAGE WELL, DRAINS, CULVERTS AND MISC WORK AT RHENOCK AND RONGLI UNDER GE 867 EWS

Amount

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting outand getting out in Sof t/ loose soil complete all as specified and directed.

M & L PCC (1:4:8) type D-2 (Using 40 mm grade stone aggregate) in foundation, filling and mass concrete complete all as specified and directed.

M & L PCC (1:3:6) type C-2 (Using 40 mm grade stone aggregate) in foundation, filling and mass concrete complete all as specified and directed.

M & L PCC (1:4:8) type D-2 (Using 40 mm grade stone aggregate) in surface channels and drains complete all as specified and directed.

M&L for pre-cast cement concrete (1:3:6) type C1, using 20mm graded stone aggregates as in block masonry with solid blocks, exc. 10 cm in width and setting in mortar (1:6), complete all as specified and directed

M&L for pre-cast cement concrete (1:3:6) type C1, using 20mm graded stone aggregates as in block masonry with solid blocks, exc. 10 cm in width and setting in mortar (1:4), complete all as specified and directed

M & L for 40mm thick Damp proof course B-0, (1:2:4) (40mm graded stone aggregate) to horizontal or vertical surfaces including necessary formwork complete all as specified and directed.

M & L for Spreading and levelling in layers n exc. 25 cm thick and ramming including watering as required all as specified and directed.

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out soft / loose soil complete all as specified and directed.

M & L Hardcore of broken stone or boulder gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

M & L for Cement concrete 75mm in sub base type D-2, (1:4:8) (40mm graded stone aggregate) complete all as specified and directed.

M&L for brickwork with old size fly ash bricks exc 6mtr mean radius built in cement mortar (1:6) complete all as specified and directed.

M&L for 15 mm thick rendering in cement mortar 1:6 on stone masonry surfaces or surfaces other than fair faces of brick work, rendering finished even and smooth (without using extra cement) complete complete all as specified and directed.

M&L 15 mm thick rendering on fair faces of brick work or concrete surface in cement mortar 1:4 on external wall finished even and fair mixed with integral water proofing compound @ 3% by weight of cement or in the manner specified by the manufacturer and in the proportions indicated all as specified and as directed. Note:-WPC will be measured and paid separately as supply only.

Supply only integral water proofing compound all as specified and as directed.

M&L for 15 mm thick rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar (1:4) complete all as specified and directed.

M&L for 15 mm thick rendering in cement mortar (1:4) on stone masonry surfaces or surfaces other than fair faces of brick work, rendering finished even and smooth (without using extra cement) complete complete all as specified and directed.

M&L for Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using ex- tra cement, including forms, moulds, mi- tred/stopped ends etc complete all as specified and directed.

M&L preparation of new plastered or unplastered surfaces of walls, applying 1mm thick plaster of paris and applying two coats of oil emulsion distemper over a coat of primer coat Chalk whiting, on plastered surfaces, prepara-tory to distempering on walls complete all as specified and directed.

M&L for preparation on newly plastered / previously untreated surfaces of wall for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces including 3mm thick wall care putty on wall complete all as specified and directed.

M&L preparation of new plastered or unplastered surfaces of walls and applying three coats of cement base paint on walls complete all as specified and directed by Engr-in-charge.

S&F sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm , complete all as specified and directed.

S&F in repairs Grating doom 100mm dia of PTMT (Minimum weight 25gms) all as specified and directed by Engr-in-Charge

S&F 40 mm dia Waste fittings (Waste cuppling), brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed

M&L for 75 mm thick PCC (1:3:6) type C-2 using 40mm graded crushed stone agg as in plinth protection/ path laid slope of 1 in 12 and finshing cement concrete surface even and smooth without using extra cement with and including all necessary form work to divide the area in panels, finishing exposed edges fair or rounding or chamfering of exposed edges or as directed by Engr-in-charge.

S&F for GI tubes medium grade, 15mm bore, with all fittings, fixed to walls, ceiling or laid in floors including taking up or down steel tubing and connections, cleaning for refixing or removal to store etc complete all as specified and directed.

S&F in repairs, bib taps, 15mm, chromium plated, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed comple all as specified and directed.

M & L Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing including 20mm thick screed bed or bedding layer in CM (1:6) complete all as specified and directed.

M/L machine cut kota stone slab flooring 20-25mm thick as in skirting dado and pillar laid over cement screed/backing plaster 10mm thick in CM 1:4 jointed with grey cement complete all as specified and directed.

M&L for glazed ceramic coloured tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match, including including 15mm thick rendering in CM (1:4) complete all as specified and as directed

M & L Granite (of any type) work 20MM thick (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) , with 20 mm screed bed or bedding layer ,including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed by Engr - in - Charge.

All as per item ser No 31 here-in before but on vertical surfaces such skirting/ dados etc including 15mm thick rendering in CM (1:4) all as specified and directed by Engr-in-Charge

M & L RCC Type B1 (1:2:4) (20 mm graded stone aggregate) Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

M & L Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work;(on flat surface) not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed.

M & L Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work;(on flat surface) exceeding 200mm thick (Horizontal or sloping complete all as specified and directed.

M & L Formwork to edges of concrete flats,(on flat surface) breaks in floors, openings in concrete walls, floors and roofs and sides of RCC/PCC bands in walls, horizontal or sloping, and similar work all exceeding 20cm wide. (Where RCC/PCC band in walls, spanning and opening complete all as specified.

M & L TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

S&F of TMT bars 6 mm to 8 mm dia, cut to length , bent to shape required , including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips, complete all as specified and directed.

Excavating in post holes each n exc 0.5 Cum getting out, in soft soil,returning,filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm and removing surplus soil to ad distance n exc 50m and making good surface complete all as specified and directed by Engr-in- Charge.

M&L for PCC (1:3:6) type C1 (using 20mm graded stone aggregate) as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed.

S&F for MS tubular structures as in truss, purline, rafters, including cutting, welding, reveting etc complete, conforming to Gde St-240 complete all as specified and directed by Engr-in-Charge.

S&F for MS plates (plain) channels, square cut or notched as in base plates, purlines, cleats etc of Gde Fe-410-W(gde-E-250) including welding, reveting etc complete all as specified and as directed.

S&F for Pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550mpa as in roof covering/cladding to wall fixed with self tapping screws all as specified and directed by Engr-in-Charge.

S&F Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering, eaves board, ridges, hips,valley gutters, drip and straight flashing cladding to wall etc, fixed with self tapping screws all as specified and directed by Engr-in-Charge.

M&L for preparation on new steel surfaces and painting two coats of synthetic enamel paint over a coat of red oxide primer on steel surfaces exc 10cm width or girth incl complete all as specified and directed.

M&L for Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed.

Removing excavated material n.exc 50m and deposited where directed at level n.exc 1.5m above the starting point all as specified and directed by Engr-in- Charge.

S&F Fe-290 Gde E-165 mild steel angle or other sections as in posts and struts in fencing etc., and similar work including cutting tops to shape as directed,drilling holes, notching for wire, including all necessary drilling holes for bolting or riveting, etc., complete all as specified and directed by Engineer-in-charge.

Supply only MS galvanised fencing of size or type as directed by Engineer-in-charge

Fixing only MS chain link fencing including line wires, any mesh size and type of standars, rails, straining bolts etc. incl provn of binding wires complete all as specified and directed.

S&F mild screw bolts(machine made) dia of neck in 5 to 10mm with hexagonal or square heads at one end and screwed the other, or screwed both ends,each screwed end ti be fitted with washers and one hexagonal or square nut,but length of bolt exc 5cm but n.exc. 10 cm long all as specified and directed.

M&L Mild steel round bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

S & F Galavanised 2 stand steel brrbed wire 2.24mm dia barbed with 2mm dia at barbs 75mm spaceing and strainings and fixed to any type of standard rails staning bolts including securing or tying at crossing with provision of GI mid steel pins etc .Including dismantling old rusted barbed wire any type complete all as specified and directed.

M&L for preparation of new or previously untreated surfaces of steel and iron surfaces of any description, not otherwise described, not exceeding 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer all as specified and directed by Engineer-in-Charge.

S&F GI frame work of size 605 x 605 mm, for seamless celing comprising of GI perimeter chanel 0.55mm thick with two unequal flanges of 20 and 30 mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/ intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete all as specified and as directed.

S&F PVC insulation panel with EPS stuck 1 mm printed PVC sheet used in lieu of plain PVC sheet sheet suitably placed in existing/ new false ceiling grid made of Aluminum /G.I/M.S/wooden with thickness of PVC insulation panel 10 mm complete all as specified and as directed. Note:- New false ceiling grid of aluminium/GI/MS/wooden if provided shall be measured and paid separately.

S&F pressed steel frame of size 125 x 60mm for door with one or more rebates including necessary fixing, lugs, hinges,lock ,strike plate, etc complete all as specified and directed.

S&F 30 mm thick (batten thickness) second class hard wood , plain, framed panelled shutters (any number of panels), with panels of 12 mm thick timber flat on both sides (feather edged), or of 12mm thick veneered particle board medium density wood particle board with commercial face veneers complete all as specified and directed. (Note :- The dimension of the various components or parts of shutters shall be as specified in clause 8.24 (a) of MES SSR 2009 Part I) complete all as specified and directed.

S&F 35 mm thick (batten thickness) Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed.

S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples all as specified and directed by Engr-in-Charge

S&F of 150 mm long aluminium, anodised, barrel tower bolt, of extruded section and fixed all as specified and directed.

S&F of 300 mm long aluminium alloy, anodised sliding door bolts with haps staple(bolt type), and fixing clips of sheet, cast or extruted sections and fixing bolt and sliding bolts of extruted sections or cast aluminium alloy and fixed complete all as specified and directed.

S&F 150 mm size Aluminium handles, cast type, anodised and fixed all as specified and directed.

S&F steel window with side hung shutter, including box type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified.

S&F steel window with side hung shutter, including box type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded complete all as specified.

S & f Sheet glass 3mm, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and directed.

M&L preparation of new wooden surfaces of any description over 10 cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Sri Gupta Construction

PRASAD PRADHAN AND SON

DEEP CHANDRA JOSHI

HEM RAJ GURUNG

S K ENTERPRISES

MS MAYA PRAKASH GOEL AND SONS

SANJAY MITTAL