SPECIAL REPAIRS TO C TYPE MD ACCN, BUILDINGS C-32 TO C-34 48 QTRS IN DRDO TOWNSHIP, PHASE-I, CV RAMAN NAGAR UNDER GE I RND EAST BANGALORE

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding and removing the rubbish off the premises complete all as specified and directed.

Roughening surface of old concrete floor by picking,sweeping clean and washing with water to remove dust ,etc complete all as specified and directed.

M&L for coloured non-skid ceramic tiles 7 to 8 mm thick of area of each tile exc. 0.06 sqm but n.exc 0.11sqm in floor/ steps etc set and jointed in neat cement slurry and pointed in coloured cement to match as in floor over and including 15mm thick screed bed in CM (1:4) complete all as specified and directed.

M&L for glazed ceramic tiles area of each tile exc 0.06 sqm but n exc 0.135 Sqm, 7mm thick in vertical surface set and jointed in neat cement slurry and pointed in white or colour cement to match over 10mm thick backing in cement mortar (1:4) complete all as specified and directed.

M&L Non Skid joint less ceramic coloured tiles 7 to 8 mm thick(square/ rectangular) area of each tile exceeding 0.18 sq m but not exceeding 0.38 sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match as in floor etc set over 5mm thick polymerised adhesive bed and pointed in epoxy grout to match, complete all as specified and directed.

M&L coloured Non Skid ceramic tiles 7 to 8 mm thick(square/ rectangular) area of each tile exceeding 0.18 sq m but not exceeding 0.38 sqm , in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match as in floor over 10mm thick backing in cement mortar (1:4) complete all as specified and directed.

M&L Machine cut Kota stone slab 20-25mm thick laid over Screed bed or bedding layer of mortar 15mm thick in CM 1:6 for laying floor finishes and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed

All as per Serial item No 07 above but in vertical surfaces like riser of steps skirting over 10mm thick backing coat in CM 1:4 complete all as specified and directed.

Dismantling stone slabs and tiles of any description or thickness in floors, apron etc laid bedded and pointed in any mortar complete all as specified and directed.

M&L Granite (of any type) tiles 18 to 20mm thick machine cut, bedded & jointed with grey cement slurry & pointed with white cement with admixure of pigment to match the shade of granite stone including cutting & polishing over 15mm thick screed in CM(1:6) complete all as specified and directed.

Demolition of cement Concrete(unreinforced) in any description in any position as in sunken floor and removing debries outside MD land complete all as specified and diected.

M&L for rendering 10mm thick CM (1:6) cement plaster on fair faces of brick work or concrete surfaces finishing the surfaces with water proofing compound complete all as specified and directed. Note :- WPC shall be measured and paid separately

Supply only water proofing compound complete all as specified and directed.

M&L 1mm thick brushbond RFX (which is a two component acrylic polymer modified cementitious coating which consists of brushbond RFX powdered nitobond BBX acrylic emulsion, grey in colour, of M/s FOSROC/Dr Fixit/Pidilite using stiff brush, roller or trowel to obatin the desired thickness complete all as specified and directed

M&L cement concrete of nominal mix Type E2 1:5:10 (40 mm graded stone aggregate) as in subbase of the sunken portion complete all as specified and directed.

M&L Cement concrete type C-2, 1:3:6 (40mm graded stone aggregate) of 75 mm thick as in plinth finishing the top surface even and smooth without using extra cement complete all as specified and directed.

Taking down cement plaster on walls any description including racking out joints hacking for key and scrubbing down with water etc complete all as specified and directed.

M&L rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 (river sand) and finished fair and even without using extra cement all as specified and directed

M&L for rendering 15mm thick cement plaster on fair faces of concrete block masnory in two layers, base layer 10mm thick in CM (1:4) and top layer 5mm thick in CM 1:4(with river sand) mixed with WPC as per manufacture' s instructions, finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge. Note :- WPC shall be measured and paid separately

M&L rendering 5mm thick in CM (1:3) on ceiling surfaces finished even & smooth without using extra cement complete all as specified and directed.

M & L for preparation of new plastered or previously untreated wall surfaces including scraping, rubbing and washing etc and applying two coats of acrylic emulsion based premium quality exterior antifungal paint over a coat of exterior primer all as per manufacturers instructions complete all as specified and directed.

M&L for preparation of newly plastered ceiling surfaces and applying three coats of white wash surfaces complete all as specified and directed.

M&L preparation of newly plastered wall surfaces and applying two or more coats of oil bound distemper over a coat of primer complete all as specified and directed.

M & L for complete removal of existing treatment of old plastered or previously untreated wall surfaces including scrapping, rubbing and washing etc and applying two coats of acrylic emulsion based premium quality exterior antifungal paint over a coat of primer all as per manufacturers instructions complete all as specified and directed.

Complete removal of existing treatment on wall surfaces and applying one coat of primer and two coat of oil bound distemper on walls including applying 2 mm thick wall putty in two layers, complete all as specified and directed.

M&L for providing one coat of white wash including preparation of old ceiling surfaces complete all as specified and directed.

S&F in repairs PVC valveless, syphonic action type, flushing cistern,10 ltrs capacity low level, white, with inlet, ball valve, float and handle including brackets and flush pipe of polythylene of low or high density of PVC 32mm for low level cistern all as specified and directed

S&F in repairs vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap, and to flushing pipe, anti-syphonage pipe, etc. complete including making good to floor including trap set in and including concrete complete all as specified and directed.

Supply and fixed in repair coloured Vitreous china wash down water closet pan (pedestal pattern), of size not less than 400x400x340mm with integrated P or S Trap outlet including fixing bolt, connecting to out going pipe and flush pipe, complete including PVC seat cover complete all as specified and directed.

Supply only 100 mm bore cast iron trap P or S type suitable for IWC complete all as specified and directed. Note: (Labour componet included in item 28 above)

S&F in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections with necessary GI fittings and fixed in position complete all as specified and directed.

S&F in repairs Vitreous China wash basin flat, size 550x400mm white, excluding taps, waste, chain and plug and porcelain stopper but including brackets including cutting for and pinning in ends of brackets or erecting stand but inclusive of fixing of supply and waste pipe and coupling complete all as specified and directed.

S&F in repairs Pillar taps, fancy type cast copper alloy, with capstan heads, 15mm dia bore chromium plated, screwed down high pressure, with or without lettered ‘Hot' or ‘Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.

S&F in repairs unbreakable acrylic corner shelf set of 3 in bathroom at 3 different corners of size 9", 11" & 13" complete all as specified and directed.

S&F in repairs Tubular towel rail brass chromium plated, 20mm dia, D type, 60cm long between flanges complete all as specified and directed.

S&F in repairs Stainless steel sink with draining board, made out of 1.00mm thick sheet for kitchen or laboratory with plug, washers waste pipe, cast iron cantilever brackets, connecting union overall size 915mmx460mm with bowl size 410mm x 330mm x 200mm complete all as specified and directed.

S&F in repairs chromium plated fancy type angular Stop valves, cast copper alloy, screwed down, high pre-ssure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed for 15mm bore complete all as specified and directed.

S&F in repairs stop valves cast copper alloy chromium plated with long shank and cup (concealed type) fancy type screwed down high pressure screwed both ends for pipe or union fixed for 15mm bore,including necessary cutting and making good wall to match complete all as specified and directed.

S&F in repairs Bib Taps( long body) 15 mm bore cast copper alloy fancy type Chromium plated, screwed down, screwed for iron pipes complete all as specified and directed.

S&F in repair Brass Chromium plated shower rose with or without swivel joints, any size, including fixing to steel pipe or union shower rose 125mm size complete all as specified and directed.

Taking up or down steel tubing and connections complete all as specified and directed.

Supplying and laying of 15 mm OD CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors with all fittings complete all as specified and directed.

All as per item No. 43 here-in-before but of size 20mm OD with all fittings complete all as specified and directed.

All as per item No. 43 here-in-before but of size 25mm OD with all fittings complete all as specified and directed.

S&F in repairs Gun-metal, globe or gate valves 25mm bore, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F in repairs Gun-metal, globe or gate valves 20mm bore, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

Demolition and breaking out drain pipes of any dia /type including necessary bend ,T and other accssories etc complete and removing the debries o/s MD land all as specified and directed.

S & F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls incuding necessary clamps etc to fixing on walls including all fittings complete all as specified and directed.

S & F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors incuding necessary clamps etc including all fittings complete all as specified and directed.

S & F 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors incuding necessary clamps etc to fixing on walls including all fittings complete all as specified and directed.

S & F 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls incuding necessary clamps etc to fixing on walls including all fittings complete all as specified and directed.

S & F 110 mm bore PVC (SWR) bends of any radius complete all as specified and directed.

S & F 110 mm bore PVC (SWR) junction single (Single `T') equal or unequal with access door complete all as specified and directed.

S & F 110 mm bore PVC (SWR) Vent Cowl complete all as specified and directed.

S & F 75 mm bore PVC (SWR) bends of any radius complete all as specified and directed.

S & F 75 mm bore PVC (SWR) junction single (Single `T') equal or unequal with access door complete all as specified and directed.

S & F 110 mm bore PVC (SWR) bends with access door complete all as specified and directed.

S & F 75 mm bore PVC (SWR) branch piece,double(double Y) equal or unequal complete all as specified and directed.

S&F PVC SWR reducers one end 110 another reduced 75mm complete all as specified and directed.

S&F PVC in repairs (SWR) floor trap diameter of out let 75mm ,plain with grating including jointing with solvent cement fixed in cement concrete complete all as specified and directed, (cement concrete shall be measured and paid seperately in appropriate item).

Taking down chowkats or frames nexc 1.5 Sqm (with shutters without taking off shutters from the frame) complete all as specified and directed.

Taking down chowkats or frames exc 1.5 Sqm and not exceeding 4 Sqm (with shutters and grill (if fixed) without taking off shutters from the frame) complete all as specified and directed.

Taking down Shutters of any description exc 1 sq. m but nexc 2 Sqm each and complete all as specified and directed.

S&F Pressed steel frames 105x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and directed.

S&F Pressed steel frames 125x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and directed.

M&L PCC 1:3:6 type C0 using 12.5mm graded stone aggregate as in filling the chowkats/frames complete all as specified and directed

S&F 30mm thick flush doors solid core construction, block board core, and plywood face panels, commercial type on both sides complete all as specified and directed.

S & F 35 mm thick second class hard wood plain, framed, panelled shutters (any number of panels), with panels of veneered particle board or plywood or bison board complete all as specified and directed.

S & F 35 mm thick second class hard wood plain, framed, skeleton shutters, open rebated and prepared to receive glass, mesh gauge etc, divided into squares with plain, chamfered or rounded mitred and rebated sash bars any numbers, edges of framing plain chamfered complete all as specified and directed.

Cutting out existing rusted/distracted portion of steel frame and after welding for steel frame to existing frame complete all as specified and directed.

M&L preparation of new wood/wood based surfaces of exc. 10cm width or girth of any description and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L Preparing new steel or iron surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed.

M&L Preparing old steel or iron surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed.

S&F Solid PVC Door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, S&F in opening as per specification & drawing all as specified and directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing complete all as specified and directed.

M&L Rendering or plastering for work in isolated widths or in widths not forming part of general plastering such as in bands, window / door sills, jambs, sunk panels, cornices, skirtings, drip moulds and similar work n exc 15 cm in width or girth; including cutting to edges, all mitres and stopped ends,etc complete all as specified and directed

S & F butt hinges, 100 mm long medium weight, cold rolled mild steel complete all as specified and directed.

S & F 150 mm long Aluminium, anodised, barrel tower bolts of extruded section complete all as specified and directed.

S&F 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.

S & F 150 mm long extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

S&F curtain rail ,chromium plated steel with fixing brackets, stops, rollers etc fixed in repairs complete all as specified and directed.

Dismantling of composite steel windows/ventilators n.exc 0.60 Sqm single leaf double shutter with fixed portion including glass panes mosquito proof mesh etc complete all as specified and directed.

Dismantling of composite steel windows/ventilators exc 0.50 Sqm and not exc 1.00Sqm double leaf double shutter with fixed portion including glass panes mosquito proof mesh etc complete all as specified and directed.

S&F Anodised aluminium powder coated (minimum thickness of powder coating 50 micron) frame/sliding tracks etc for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed

S&F Anodised aluminium powder coated window and ventilator shutters, openable type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc complete all as specified and directed

S&F Anodised aluminium powder coated window and ventilator shutters, fixed/sliding type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc complete all as specified and directed

S&F weather proof silicon sealant fixing frame, the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge.

S&F 4mm thick sheet figured glass, pin head type and glazing with oil putty in square not exceeding 0.5 Sqm in each pane complete all as specified and directed.

S & F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F in repair Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

Dismantling wrough iron or mild steel work of any description complete all as specified and directed.

S&F MS framed work such as grills, gratings, railing, ladders ,gate;walk ways and similar works etc. confirming to Fe-290 Gde E-165 complete all as specified and directed.

M&L Prelaminated particle board 18/19mm thickness,exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and directed.

M&L for external teak wood lipping 6 mm thick, fixed with nails fixed to particle board of 19 mm thick complete all as specified and directed.

S&F 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished polished complete all as specified and directed.

S&F powder coated rectangular cabinet Magnet for cup boards complete all as specified and directed.

S & F Continuous (piano) hinges width of flaps(when open 30mm), mild steel, bright finish or electro galvanised complete all as specified and directed.

S&F Aluminium, anodised, barrel tower bolts of 100mm long extruded section and fixed complete all as specified and directed.

S&F second class hardwood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and directed.

S&F IInd class hard wood plain fillets, square, rectangular or triangular in section, wrought sectional area n.exc 3 Sqcm including polishing etc complete all as specified and directed.

S&F 100mm long aluminium anodised hasp and staples,safety type,with hinges including bolt to hingeplate and fixed with screws complete all as specified and directed.

S&F in repairs 20mm dia aluminium tubular rail as in curtain rods fixed in cup boards and pelmets complete all as specified and directed.

S&F in repairs Aluminium brackets for fixing of curtain rods complete all as specified and directed.

Cutting chases in concrete block walls, pinning in, making good to facings where required and pointing in cement mortar 1:3 for concealed water tubing etc., and making good, cutting not ecx 10 cm girth complete all as specified and directed.

Dismantling water tanks Exc 500 litres capacity & not exceeding 1000 litres complete all as specified and directed.

S&F rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) 1000 litres capacity hoisted and fixed in position all as specified in SSR Part I complete and directed.

S&F in repairs Ball brass valve high pressure with polythene float and fly out nut, screwed for iron pipe or brass ferrule and fixed to dia of pipe 25mm complete all as specified and directed.

Demolition of cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) including removing to a distance exc 5 Km but not exc 15 Km outside MD Land complete all as specified and directed.

M&L Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness, M-40 grade with grey cement and pigments over sand cushioning complete all as specified and directed.

M&L sand filling in floors or pavings, laid in layers not exceeding 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed.

S&F in repair stainless steel plate rack of 0.63mm thick sheet, size 800mm x 600mm complete all as specified and as directed.

Demolition of cement concrete padding in roof (unreinforced) including removal of existing roof treatment of any description and in any position not otherwise specifically provided for and including removing debris to a distance exc 5 Km but not exc 15 Km outside MD Land complete all as specified and directed.

M&L for rendering 10mm thick over roof concrete surface in CM 1:3 and finishing the surface even and smooth without using extra cement with water proofing compound complete all as specified and directed (WPC shall be measured and paid separately).

M&L for rendering 10mm thick cement plaster on brick masonry surface in CM 1:4(with river sand) mixed with WPC @ 3% as per manufacture' s instructions, finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge. Note :- WPC shall be measured and paid separately

(a) M&L for mechanical cleaning of surface to make it free from any bituminous residue/dirt oil and Greece etc all as specified and directed by GE/Engr-in-charge. (b) M&L for cracks treatment by cutting open cracks and cleaning it from dirt/loose materials etc and filling with polyurethane based sealant with and including application of PU based primer all as direct by GE/Engr-in-charge. (c) M&L for applying water based polyurethane modified dispersion (single component, cold applied, non toxic, VOC complaint) in 03 coats including 01 coat of primer of same material after dilution of water at 50% or specific primer matching same material as per manufacturer specification and as directed by GE/EIC. A layer of geotextile grid of minimum 40gsm sandwich in between two PU layers as per manufacturer’s specification be provided. Properties of Poly urethane based chemical shall confirm to following techincal parameters:- (i) Highly elastic (ii) UV resistance (iii) Adhesion to concrete >1N/Sqmm (iv) Tensile Strength- not less than 1.5 N/Sqmm for free film (v) Elongation- Not less than 350% (vi) Solid content by weight - not less than 60% (vii) Air/Water permeability BSEN 12390 at 5 bar -72 hours should be NIL and minimum dry film thickness of water proofing membrane must be 1.0mm (viii) Accelerated weathering (ASTM 453): Pass 1000 Hours. (ix) Reaction to fire - non inflammable. (x) Application rate confirming to ASTMD 6083-97 & manufacturers specification. (xi) Density range 1.25 to 1.3 KG/litre.

(x) Application rate confirming to ASTMD 6083-97 & manufacturers specification. (xi) Density range 1.25 to 1.3 KG/litre. Notes :- (a) To be applied by the rep of manufacturer's authorised applicator only contractor has to provide manufacturer's test certificate for the above mentioned technical parameters and purchase vouchers. (b) Removal of old roof treatment paid separately vide item 114. (c) Roof slope to be ensured to avoid water ponding. (d) For accessible terrace and inaccessible terrace, 300mm height of vertifcal surface/parapet wall to be treated with same specification of slab. (e) Make :- Bostik, Berger, Fosroc, Sika, Asian or any other make approved by E-in-C's Branch for PU based water proofing treatment.

Taking down carefully old unserviceable aluminium/ copper point wiring (light, fan,socket or power) complete with fittings such as switches, sockets, ceiling rose, light fittings etc and making good the distrubed surfaces to match with existing surfaces complete all as specified and directed.

Taking down old unserviceable DBs including MCCBs/MCBs complete and making good the distrubed surfaces to match with existing surfaces complete all as specified and directed.

Taking down old unserviceable sub main wiring of any type and size and making good the distrubed surfaces to match with existing surfaces complete all as specified and directed.

Taking down ceiling fan,dismantling the fan for carrying out servicing, greasing including replacing rubber reel, clamps, cottor pin and other minor parts etc, cleaning and filling cavities with filler and painting of ceiling fans with one coat of synthetic enamel paint by spraying and refixing the same and making electric connection with proper cable complete all as specified and directed.

M&L for point wiring with single core copper conductor cable of size 1.5 Sq mm, PVC insulated, unsheathed, multistranded FRLS type, 1100V grade conforming to IS-694 drawn through in and including non-metallic rigid PVC conduit 25 mm dia medium grade with conduit acessories concealed in walls / floors / ceiling etc duly cutting chases/ grooves and making good the distrubed surfaces to match with existing surfaces including GI modular flush boxes, modular white plate with frame of suitable sizes for mounting of modular switches, sockets and regulators etc and including 1.5 Sqmm PVC insulated, sheathed, copper conductor cable, FRLS type, 1100V grade green in colour as earth continuity conductor connecting to earth dolly complete all as specified and directed for following:-

One light point controlled by one, one way modular switch

One ceiling fan/Exhaust fan point controlled by one, one way modular switch complete all as specified and directed.

One light point controlled by two, two way modular switches complete all as specified and directed.

One bell point controlled by one modular bell push complete all as specified and directed.

One 3 pin 6 amps socket outlet point controlled by one modular switch on the same board with other switches complete all as specified and directed.

One 3 pin 6 amps socket outlet point controlled by one modular switch on Independent board complete all as specified and directed.

All as per item No 122 above but using 2.5 sqmm copper conductor cable, PVC insulated, unsheathed, multistranded FRLS type cable, 1100 volts grade conforming to IS-694 alongwith 2.5 sq mm cable as earth continuity for 6pin 16 amps socket outlet point controlled by one modular switch on Independent board complete all as specified and directed.

S&F modular switch 6 A, single pole, 1 way, 230 V, 1 module complete all as specified and directed

S&F modular switch 6 A, single pole, 2 way, 230 V, 1 module complete all as specified and directed

S&F 3 Pin 6 A modular socket outlet, 230 V, 2 module complete all as specified and directed

S&F modular switch 16 A, single pole, 1 way, 230 V, 1 module complete all as specified and directed

S&F 6 Pin 16 A modular socket outlet, 230 V, (6A/16A) 2 in 1, 2 module complete all as specified and directed

S&F Modular bell push 6 A, 230 V, 1 module complete all as specified and directed

S&F electronic modular fan regulator 120 W, 230 V, 2 module complete all as specified and directed

S&F call bell multi music type complete all as specified and directed

S&F ceiling rose surface bakelite three terminal complete all as specified and directed

S&F Lamp holder polycarbonate/ bakelite type with back plate complete all as specified and directed

S&F LED lamp 12 W, 230 V, retrofit type complete all as specified and directed

S&F exhaust fan 300 mm sweep, metallic body 900 rpm, 230 V, 50 Hz, single phase, copper wound motor, grey in colour complete with blade, box type louvers duly providing suitable hole for exhaust fan complete all as specified and directed.

S&F LED light fitting 20 Watt, 6500K, 2000 Lumens surface/ceiling mounted batten fitting with polycarbonate body enviormental friendly with better asthetic finish for soft light duly wired upto terminal block complete all as specified and directed

S&F LED light fitting 10 Watt, 6500K, 1000 Lumens surface/ceiling mounted batten fitting with polycarbonate body enviormental friendly with better asthetic finish for soft light duly wired upto terminal block complete all as specified and directed

S&F LED security light fitting 30 Watt, 6500K, 3000 Lumens outdoor with IP-66 protection made out of pressure diecast aluminium housing with acrylic cover as diffuser including suitable bracket made out of galvanised pipe medium grade of suitable dia and adequate length bent to shape and necessary fixing arrangement by using clamps, nuts, bolts etc complete all as specified and directed.

M&L for Distribution board TP & N, 4 way, 415 Volts, epoxy powder coated with metal door, IP-43 protection fixed flush to wall and suitable for universal mounting with 200 Amps copper bus bar, neutral bar, standard DIN rail, earth bar and top and bottom removable gland plates with Knockouts complete all as specified and directed.

M&L for Distribution board SP & N, 16 way, 230 Volts, epoxy powder coated with metal door, IP-43 protection fixed flush to wall and suitable for universal mounting with 200 Amps copper bus bar, neutral bar, standard DIN rail, earth bar and top and bottom removable gland plates with Knockouts complete all as specified and directed.

S&F single pole and neutral enclosure with two pin and earth plug and socket including MCB SP 20 A, 10 KA, C curve type complete all as specified and directed.

S&F MCB TP&N 63 A, 415 V,10 KA, C curve type complete all as specified and directed.

S&F MCB SP&N 40 A, 230 V,10 KA, C curve type complete all as specified and directed.

S&F MCB SP 6-32 A, 230 V,10 KA, C curve type complete all as specified and directed.

M&L for sub main wiring with 2 run of 6 sq mm of single core copper conductor cable PVC insulated, unsheathed, multistranded FRLS type, 1100V grade conforming to IS-694 drawn through in and including non-metallic rigid PVC conduit not less than 25 mm dia medium grade with conduit acessories concealed in walls / floors / ceiling etc duly cutting chases/ grooves and making good the distrubed surfaces to match with existing surfaces including 1 run of 6 Sq mm single core copper conductor cable, PVC insulated, sheathed, multistranded FRLS type, 1100V grade green in colour as earth continuity conductor and connecting to earth dolly complete all as specified and directed. Note:- 3 runs of 6 Sq.mm and 1 run of PVC conduit will be measured and paid as one unit

M&L for sub main wiring with 4 run of 10 sq mm of single core copper conductor cable PVC insulated, unsheathed, multistranded FRLS type, 1100V grade conforming to IS-694 drawn through in and including non-metallic rigid PVC conduit not less than 25 mm dia medium grade with conduit acessories concealed in walls / floors / ceiling etc duly cutting chases/ grooves and making good the distrubed surfaces to match with existing surfaces including 2 run of 10 Sq mm single core copper conductor cable, PVC insulated, sheathed, multistranded FRLS type, 1100V grade green in colour as earth continuity conductor and connecting to earth dolly complete all as specified and directed Note:- 6 runs of 10 Sq.mm and 1 run of PVC conduit will be measured and paid as one unit

M & L for Earthing complete with galvanised iron earth plate electrode 600mm x 600 mm x 6 mm buried directly in ground vertically to depth not less than 2.25 mtr below ground level with the top edge of the plate not less than 1.5 mtr from ground level connected to and including GI Strip 32x6 mm of length up to 7.5 mtrs or testing point by means of GI bolts, nuts and washers etc and connected to earthing test point all as shown in elecrical plate No-3 of SSR part -1 of 2009 and testing on completion including excavation /earth work in any type of starta, PCC (1:3:6) type C1 earthing chamder, pre cast slab 50 mm thick in cement concrete (1 : 2 : 4 ) type B1 , cast iron frame, funnel with wire mesh, GI watering pipe of 20 mm bore medium grade complete all as specified and directed

K N RAJ CONSTRUCTIONS

B5BUILDING SOLUTIONS

Sri Lakshmi Constructions

Lucky Enterprises

D NAGI REDDY

K. VENKATESH NAIDU