Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹41.4 LAccepted-AOC 145 SAINIK NAGAR RAIBARELLI ROAD TELIBAGH LUCKNOW | L1 | Accepted-AOC LOWEST | |
| 2 | L2₹42.4 L+₹1.0 L (2.51%)Rejected-Finance 73 ASHOTOSH NAGAR NEAR KUNDAN GENERAL STORE OPP SARAD TIMBER P O MANAS NAGAR KRISHNA NAGAR LUCKNOW 226023 | LUCKNOW | LUCKNOW | UTTAR PRADESH | 226023 | L2 | Rejected-Finance OTHER THAN LOWEST | |
| 3 | L3₹42.5 L+₹1.1 L (2.68%)Rejected-Finance 93 SARASWATI PURAM COLONY SG PGI LUCKNOW UP 226 014 | LUCKNOW | LUCKNOW | UP | 226014 | L3 | Rejected-Finance OTHER THAN LOWEST | |
| 4 | L4₹43.3 L+₹2.0 L (4.71%)Rejected-Finance GALI NO 5 6 H NO 6 275 JHARODA MAARA EXTN PART III BURARI NEW DELHI 110084 | NEW DELHI | CENTRAL DELHI | DELHI | 110084 | L4 | Rejected-Finance OTHER THAN LOWEST | |
| 5 | L5₹46.8 L+₹5.4 L (13.0%)Rejected-Finance H 11 SECTOR S LDA COLONY KANPUR ROAD LUCKNOW UP 226012 | LUCKNOW | LUCKNOW | UTTAR PRADESH | 226012 | L5 | Rejected-Finance OTHER THAN LOWEST |
Tender Value
₹48.9 L
EMD Value
₹98,000
Closing Date
4 Apr 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE West Lucknow
GE West Lucknow, 11 SP Marg, Lucknow Cantt - 226002
PROVN OF BLDG SECURITY LIGHTS AND BULK HEAD FITTINGS AND ALLIED WORKS IN JCOS AND OR MD ACCN AT NIRBHAY VIHAR AND RAJEEV SANDHU VIHAR, PROVN OF SEPTIC TANK AND SOAKAGE WELL TO BLDG NO T-26 AND CERTAIN MINOR WORKS UNDER GE (WEST) LUCKNOW
2023_MES_584801_1
GE/W/LKO/78 OF 2022-23
Open Tender
Civil Works
Item Rate
180 days
Lucknow
As per NIT and Tender Documents
9 documents required · 9 mandatory
₹500
GE West Lucknow
₹98,000
Yes
26 Apr 2023
7 Mar 2023
6 Apr 2023
7 Mar 2023
4 Apr 2023
21 Mar 2023
7 Mar 2023 - 14 Mar 2023
Amount
Excavating in trenches not exc 1.5m wide and not exc 1.5m in depth for foundation etc or for shafts, wells, cesspits, manholes, pier holes pipes etc not exc 10 sqm on plan and not exc 1.5m in depth and getting out in soft/loose soil complete all as specified and directed.
Excavating over areas, not exc 1.5 m deep and getting out soft/loose soil complete all as specified and directed
M & L for Plain Cement concrete Type D2 1:4:8 using 40 mm graded stone aggregate as in foundations, filling and mass and sloping floor concrete complete all as specified and directed
M&L RCC M-25 (Design mix) using 20mm graded stone aggregate as in foundations, including rafts, footings, foundation beams, plinth beams, bases for columns, etc. basements slabs, under reamed piles and mass concrete and similar works complete all as specified and directed.
M&L RCC M-25 (Design mix) using 20mm graded stone aggregate as in beams, cantilevers, bressummers, lintels over 1.5m span and similar works complete all as specified and directed.
M&L RCC M-25 (Design mix) using 20mm graded stone aggregate as in columns, pillars, piers, posts and struts and similar works complete all as specified and directed.
M&L RCC M-25 (Design mix) using 20mm graded stone aggregate as in slabsupported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs, shelves and in similar work complete all as specified and directed.
M&L for Use and waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams and similar work, vertical or to batter for rough finished surface complete all as specified and directed.
M&L for Use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed
M&L for Use and waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splay between floors and beams, etc. and similar works for rough finished surfaces complete all as specified and directed
M&L forUse and waste of formwork to sides of pillars, posts, struts, piers, columns and stanchions and similar works for rough finished surfaces complete all as specified and directed
M & L for use and waste of Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs not exc 20 CM wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide for rough finish surface of concrete complete all as specified and directed.
S&F for mild steel deformed bars TMT bars 10mm dia and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.
S&F for mild steel deformed bars TMT bars 6 mm to 8 mm dia cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.
M&L for brick work with fly ash bricks of old size, straight or curved on plan exc 6 m mean radius, built in cement mortar 1:6 complete all as specified and directed.
M&L for brick work with old size fly ash bricks of class designation 75, straight or curved on plan to any radius in half brick thick walls, built in cement mortar 1:4 complete all as specified and directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in soft/loose soil complete all as specified and directed.
Removing excavated material not exc 50m and depositing where directed at a level not exc 1.5m above the starting point complete all as specified and directed
Earth filling under floor including well ramming and watering in layers not exc 15 CM in hight complete all as specified and directed
M & L for anti termite treatment and treating the backfill in contact with foundation @ 7.5 litres of emulsion per Sqm of verticle surface (Area of the sub structure in contact with backfill to be measured) complete all as specifed and directed
M & L for anti termite treatment and treating the top surface of filled earth @ 5 litres of emulsion per Sqm of surface area complete all as specifed and directed
M & L for anti termite treatment and treating the soil under plinth protection @ 5 litres of emulsion per Sqm of surface area complete all as specifed and directed
M&L 25mm thick PCC 1:2:4 type B1 using 20mm graded stone aggregate as in floor complete all as specified and directed.
M&L 75mm thick Cement Concrete, type D 2, 1:4:8 using 40 mm graded granite stone aggregate in sub base of floor complete all as specified and directed.
M&L cement concrete, 1:3:6, type C1 using 20 mm graded stone aggregate as in plinth protection, 75 mm thick, finished even and smooth without using extra cement complete all as specified and directed
Material and Labour for rendering 15mm thick in CM 1:6 on brick work or concrete surface and finishing the surface even and smooth without using extra cement complete all as specified and directed.
M & L for 15 mm thick rendering in CM 1:4 including using waterproofing compound @ 3% by weight of cement on fair faces of brick walls or concrete surfaces and finishing surface even and fair complete all as specified and directed. NOTE- WPC shall be measured & paid separetly.
Material and labour for rendering 5mm thick in CM 1:3 on concrete surfaces of ceiling and finishing the surface even and smooth without using extra cement complete all as specified and directed.
Supply only integral water proofing compound conforming to IS 2645 complete all as specified and directed.
Material and Labour for coloured glazed ceramic tiles 350x250/300 x 450 x 7 to 8mm thick on vertical surfaces such as skirting/dado set and jointed in neat cement slurry & pointed in colour cement to match the surface over and including 10 mm thick rendering in cement morter (1:4) complete all as specified and directed.
M&L for non skid ceramic tiles coloured, superior quality 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm as in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 15mm thick screed bed in cement & sand mortar 1:6 complete all as specified and as directed.
M&L 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.& including screed bed or bedding layer 15mm thick in cement mortar 1:6 complete all as specified and directed.
M&L Cement Concrete 1:2:4 type B-1 using 20mm graded stone aggregate as in roof kerbs, benching, copings, padding, kneelers, bed blocks, hold fast and the like including weathering, slightly rounded or chamfered angles and throating including necessary formwork complete all as specified and directed.
M&L mild steel framed work such as grills, gratings etc. with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.
S&F Solid PVC frame (Single Rebated) of size 60mm x 30mm made out of solid PVC foam with homogenous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100 x 8 sheet metal CSK screws complete all as specified and directed
S&F Factory made soild PVC profiled panel door shutter 28mm thick with integral skin as frame & 3mm thick high pressure compact laminate on both side of approved colour as infill, with 'C type Gl or 40 x 20 x19 of MS pipe as stiffner & supplying & fixing in frame at site as per specifications & drawing.
Supply & fixing MS Butt hinges "medium weight" cold rolled mild steel 100mm size complete all as specified and directed.
Supply & fixing 150mm long alumunium anodised barrel tower bolts of extructed section complete all as specified and directed.
Supply and fixing of 100mm size aluminium handle, fabricated type anodised, ISI marked complete all as specified and directed.
M&L preparation of new steel surface of any description exceeding 10cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
S&F aluminum alloy anodized sliding door bolt 300mm long with hasp and staple (bolt type) and fixing clip of sheet and cast in extruded section and fixing bolts and sliding bolt of extruded section complete all as specified and directed.
S & F Powder coated aluminium anodised (minimum thickness of powder coating not less than 50 micron) frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.
S&F powder coating anodized aluminium glazed window and ventilator shutters, side hung/ top hung type without sash bars, with aluminium sections weighing not less than 0.55kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as 01 no. 150mm long peg stays, 02 nos. 100mm long hinges type B-21, 01 no. 150mm long tower bolts and 01 no. 125mm long handles complete all as specified and directed.
S&F 0.36 mm dia stainless steel wire cloth with average width of aperature 1.40 mm and fixed with stainless steel wire staples or moulded beading complete all as specified and directed.
S&F 4 mm thick sheet glass ordinary quality and fixing with wooden beads or oil putty and provsion of glazing pins in squares not exceeding 0.50 Sqm in each pane complete all as specified and directed.
M&L for preparation of newly plastered surface of ceiling and applying three coats of white wash complete all as specified and directed.
M & L for preparation of new plastered surface of wall and applying two coats of distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour over and incl Priming plastered and other surfaces with alkaliresistant priming paint complete, as per manufacturer's specification, complete all as specified and directed.
M&L preparation of new plastered surface of walls and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed.
S&F 15mm bore steel water tubes "medium grade" galvanized with all fittigs such as bends, elbows tee etc and fixed to walls and ceiling in floor complete all as specified and directed.
S&F 20mm bore steel water tubes "medium grade" galvanized with all fittigs such as bends, elbows tee etc and fixed to walls and ceiling in floor complete all as specified and directed.
Supply & Fixing Angle valve cast copper alloy with capstan head chromium plated screwed down high pressure with long shanks and fly nuts screwed for 15mm bore pipe complete as specified and directed.
Supply & Fixing Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed 15mm bore pipe for wall and wash hand basin complete as specified.
Supply & Fixing 15mm bore PVC connection 450mm long with brass/PVC nut and washer complete all specified and directed.
Supply & Fixing copper alloy long body bib taps chromium plated suitable for 15mm bore pipe with captain head complete all as specified and directed.
Supply and Fixing Gun-metal, globe or gate valves 20mm bore with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.
S&F brass chromium plated overhead shower rose with arms, 125mm dia, round shape, single flow, fancy type, with or without swivel joints suitable for 15mm bore pipe and fixed complete all as specified and directed.
S & F of hand shower (health faucet) with 1 m long flexible tube suitable for hot and cold water supply including wall hook, bracket etc complete set of superior quality complete all as specified and directed.
S&F 1000 litre capacity Rotational moulded polyethylene water storage tanks triple layered (cylindrical, vertical with closed top) ISI marked, hoisted & fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc inluding 20 mm ball valve high pressure of PTMT with apoxy coated aluminium rod, complete all as specified and directed
Supply and fixing of vitreous china wash hand basin flat back size 550x400mm and including brackets and CP waste coupling 32mm dia complete all as specified and directed.
S&F PVC low level white flushing cistern valveless syphonic action type 10 lts capacity with inlet, ball valve, float and handle including PVC flush pipe 32 mm dia with bend complete all as specified and directed.
S&F vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) including provision of lime concrete bedding complete all as specified and directed
S & F sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 550 mm long complete all as specified and directed
S&F CP brass tubular towel rail 20mm dia, 'D' type, 600mm long between flanges, superior quality, fancy type, fixed to wall with PVC gully and CP brass screws complete all as specified and directed.
S&F glass corner shelves fancy type 6mm thick 250x250mm size and fixed over CP brass brackets complete all as specified and directed.
S&F 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall including PVC holding clamps, complete all as specified and directed.
S&F 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall including PVC holding clamps, complete all as specified and directed.
S&F PVC bends 110 mm bore complete all as specified and directed.
S&F PVC bends 75 mm bore complete all as specified and directed.
Supply and fixing 75 mm dia PVC nahani trap with CP grating including jointing to waste pipe fixed in cement concrete complete all as specified and directed.
S&F PVC(SWR) branch piece,single equal or unequal 110mm dia compete all as specified and directed
S&F PVC (SWR) vent cowls suitable for 75mm bore pipes complete all as specified and directed.
M & L for Concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested in cement concrete 1:3:6 type C-2 using 40mm graded crushed stone aggregate for 150 mm bore pipe complete all as specified and directed.
M&L 150mm sail-gllazed stoneware drain pipes laid in trenches and jointed complete all as specified and directed.
M&L for provn of roof treatment with polymeric water proofing membrane all as given below:- (a) Dismantling of existing roof treatment and cleaning of prepared roof surface by washing and rubbing etc. (b) Applying a coat of bituminous primer conforming to IS: 3384-1986 @ 0.4 Iit/sqm on prepared surface and allowed to dry. (c) Applying and laying 3mm thick APP membrane having non woven polyester matt at core and covered with high quality polymeric asphaltic protected thermo fusible HMHDPE film on both sides with over laps 10cm and 15cm at longitudinal and transverse direction respectively and sealed by flame, sealing all overlaps complete including treatment at all junctions and corners. The membrane shall be torched into groove on vertical plane and groove sealed with cement mortar 1:3. (d) Applying a tack coat of hot blown grade 85/25 @ 1.2 Kg/Sqm over APP membrane. (f) Applying two coats of aluminium paint over polymeric membrane complete all as specified and directed. Note :- PCC padding or rendering as required for smooth roof surface shall be measured and paid for seperately under relevant item
M&L 10mm thick screed bed or bedding layer in CM 1:4 using 100% coarse sand over roof slab, finished surface even and smooth without using extra cement and mixed with 3% integral water proofing compound complete all as specified and directed. NOTE: (i) WPC shall deemed to be inclusive in quoted unit rate. (ii) Wherever screed bed shall be provided, PCC padding shall not be provided.
M&L for cement concrete 1:2:4 type B-1 using 20mm stone aggregate as benching copping, surface channel and similar articles finishing even and smooth using extra cement complete all as specified and directed.
M&L for rendering 15 mm thick in cement mortar 1:4 on fair face of brick work of walls, , finished even & smooth without using extra cement complete all as specified.
M&L for providing precast cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate as in cover slabs for man holes, drains, soak well etc and similar articles etc, set in CM 1:4 complete all as specified and directed.
M&L conventional RCC septic tank for 50 users, designed to carry sewage and sullage water, excavation in any type of soil, PCC 1:4:8 below foundation, RCC M-25 Design mix in walls, base slab, baffle walls and roof slab including beams etc with vent shaft, manhole opening with cover connection etc including all required earth work in soft/loose soil, returning filling and removal etc complete all shown on CELZ drawing No TD/750 sheet 1/2 & 2/2 complete all as specified and directed.
M&L construction of soakage well of size 3.0M dia x 4.50M effective depth with fly ash bircks and RCC M-25 design Mix using 20mm graded stone aggregate as in cover slab etc. including all required earthwork in soft/loose soil, returning filing and removal etc and filling of brick bats and cement concrete etc complete all as shown on CELZ drawing No TD/576 sheet 1/2 & 2/2 complete all as specified and directed.
M&L Cutting into existing man holes/spectic tank for connection of new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channels (1/2 round or 3/4 section) in cement concrete 1 : 2 : 4 type B1 smooth finished and reforming benching complete all as specified and directed.
Dismantling stone slab and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as specified and directed.
M & L for Plain Cement concrete Type D2 1:4:8 using 40 mm graded stone aggregate as in foundations, filling sub base and mass concrete in cluding demolition of cement concrete (unreinforced) in ground floors and paving not exc 15 CM thickness below or above ground level complete all as specified and directed
M& L for (1st quality)Vitrified tiles double charged 8 to 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm butn ot exc 0.72 Sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 15mm thick screed bed in cement & sand mortar 1:6, complete all as specified and as directed.
All as per item No 85 above but on vertical surfaces including 10mm thick backing coat in CM 1:4 , complete all as specified and as directed.
Taking down cement or cement lime plaster on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed.
M&L preparation of new plastered surface of wall and applying two coat of oil bound distemper over a coat of alkali resistant primer complete all as specified and directed.
M&L for point wiring complete for one light point or one fan point controlled by one, one way 5 Amp switch with PVC(FRLS)insulated unsheathed multistranded copper conductor of size 1.50 sqmm nominal cross sectional area single core drawn in and including not less than 20mm dia 'medium grade' PVC concealed conduits ISI marked and fittings, including pressed steel concealed terminal switch boxes not less than 1.6mm thick of reqd size factory made duly painted inside and outside with one coat red oxide primer, 3mm thick plastic laminated bakelite sheet top cover (ISI Marked) fitted with chromium plated brass screws & washers complete including 1.50 sqmm nominal cross sectional area PVC (FRLS) insulated unsheathed multistranded copper conductor green as earth wire connected to earth dolly with all accessories complete all as specified and directed. Note: cutting, chases for concealed point wiring and making good the surface is included
All as per Item No 89 above but for one 5 pin 5/6 Amp socket outlet point on the same board with other switch, complete all as specified and directed.
All as per Item No 90 above but for one 6 pin 15/16 amps socket outlet point on an independent board with cables of size 2.50sqmm and green colour earth cable of size 2.50sqmm, complete all as specified and directed..
S & F switch piano, flush type 5/6 amp, single pole, one way 240 volt complete all as specified and directed.
S&F ceiling rose surface bakelite three terminal complete as specified and directed.
S & F switch piano flush button single pole one way 15/16 Amp 240 volt complete all as specified and directed.
S&F socket outlet flush type multipurpose 2 in1, 3 pin 5/6 and 15/16 Amp, 230 volts complete all as specified and directed.
S&F socket outlet flush type multipurpose 2 in1, 5 pin 5/6 Amp, 230 volts complete all as specified and directed.
S&F angle type holder insulated body with back plate suitable for batten fittings complete all as specified and directed.
S&F 7/9 watt LED Lamp any type as required complete all as specified and as directed
Supply & fixing of bulk head light fitting made from cast aluminium body with heat resistance pressure die cast housing, IP-65 protection cover suitable for bulk head fitting integrated type 10 W LED, 6500K , 105 lumens/watt including inbuilt electronic driver complete all as specified and as directed. Make: Ecolink Cat Part No WT100W LED12SCWPSU/ Bajaj Cat Part No BIBWP 10W LED/Havells Cat Part No HEXAFT 10WLED 857SSYMBOPC.
S&F of LED Building security light 20/24 Watt with high power LED source (>100lumen/watt) PDC housing, IP65 and IK 07 with 4 KV inbuilt surge protection potted driver including Electrical connection with PVC three core copper flexible wire & all necessary fixing accessories ,complete all as specified and directed. Make Ecolink Cat Part No 20WECOLINK STREET/(CW) GRPCS1/ Bajaj Cat Part No EMXT P 24L WH CR PC SD/Havells Cat Part No ENDUR PEARL SL 20WLED 757SASYTOPCMP
Supply and fixing wall/surface mounting luminaires (Mirror Light) integrated LED Batten( 2 feet) 10/12 W, 6500 K, 230V ,100 lumens/watt,with extruded aluminium housing & integrated electronic driver complete including Electrical connection with PVC three core copper flexible wire & all necessary fixing arrngements complete all as specified and directed.Make:Phillips smart brite BN 021 LED 12S 6500/4000 PSU GR/SI /Havells cat no LUMILINE+BS10WLED865SPCSS/ Orient Taskline AI LBLN-12-C-AL
Supply and Fixing of wall/surface mounting luminaires integrated LED Batten 20/22 W, warm yellow 3000/4000 K, 230V with extruded Aluminium housing 4 feet long with frosted PMMA/PC diffuser & integrated electronic driver complete including Electrical connection with PVC three core copper flexible wire & all necessary fixing arrangements complete all as specified and directed. Make Phillips Smart brite cat no BN 021 LED 22S 4000 PSU GR/SI /Havells Endura linear neo cat no enduralinear neo BS22WLED865SPCWH/ Bajaj Cat Part No BCLAB 20W WH LED P
S&F sheet metal enclosure for MCB DB double door type, single pole and neutral 4 way 240 Volts with 100/125 Amps rated bus bar of suitable size plate and common neutral link, epoxy powder coated, factory made complete without MCB and with enclosure blank plates for unused way complete all as specified and directed.
S&F MCB, single pole 32 to 63 Amp, 240 volts, 10 KA breaking capacity, 'C' curve complete all as specified and directed.
S&F MCB, single pole 6 to 32 Amp, 240 volts, 10 KA breaking capacity, 'C' curve complete all as specified and directed.
S & F of exhaust fan single phase, 230/240 Volt heavy duty metallic body of size 300 mm sweep 1400 RPM with suitable louvers including making holes of suitable size and grouting nuts and bolts etc. and making connection with twisted copper flexible wire 23/0.076mm complete all as specified and directed. Make:- Usha (Turbo heavy duty metal body)/Havell's (Turbo force HP)/Orient (Heavy duty)
S & F water heater storage type electric BEE 5 star rated of capacity 25 ltrs, 8 Mpa working pressure, 1.5mm thick steel tank to operate on 230 volt AC, 2000 watt vertical type including 2/4 Nos full threaded fastener of size 100x10 mm with, 2 No washer, water connection with 02 Nos heavy duty PVC flexible pipe of size 15 mm, 450 mm length & suitable plug top of 16 Amp capacity complete all as specified and directed. Make:- Bajaj Montage/ Havells (Adonia series)/Jaquar & Co Pvt Ltd. NOTE:- Product must have 2 years warranty on heating element & 5 years warranty on inner tank.
Supply & Laying or passing through pipe, 1100 volt grade heavy duty cable with XLPE insulated Aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and over all PVC sheathed of 10 Sq mm 2 core stranded conductor nominal cross section complete all as specifed and directed.
M & L for sand cushioning to underground cable 8cm deep before laying and 15cm deep after laying cable complete all as specified and directed
Supply and laying of sub class 'B' bricks old size over the HT/LT cable laid flat for protection of calbe of compacted thickness complete all as specified and directed
S&F 40 mm bore GI pipe light grade with all fittings base in trenches/poles/walls for protection of calbe complete all as specified and directed.
M&L Earthing complete with galvanised steel earth plate electrode 600x600x6mm thick, burried directly in ground (earth pit not less than 2.25m deep below ground level) with top edge of the plate not less than 1.5m deep below normal ground level, connected to galvanised earth lead wire 4.0mm dia ( upto 7.50m) by means of bolts, nuts, check nuts & washers of galvanised iron or steel, earth lead wire protected by 15mm dia GI pipe light grade, 20mm dia light grade GI pipe for watering, meshed funnel, alternate layer of charcoal and common salt complete all as SSR Item No. 19471 and shown in electrical plate No. 3 of SSR part-I with PCC chamber, 50mm thick RCC cover in 1:2:4 type B-1 using 20mm graded stone aggregate reinforced with 8mm dia TMT bar @ 80mm c/c both way in lieu of CI pit cover and protection including necessary excavation and earth work complete all as specified and directed.
suniltraders
M/S Reliance Construction
QUALITY CONSTRUCTIONS CO
rajan construction
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .