Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹35.3 LAccepted-AOC | 1 | Accepted-AOC L-1 | |
| 2 | 2₹37.0 L+₹1.0 L (2.78%)Rejected-Finance | 2 | Rejected-Finance Being other than L-1 | |
| 3 | 3₹39.1 L+₹3.1 L (8.68%)Rejected-Finance GALI NO 5 6 H NO 6 275 JHARODA MAARA EXTN PART III BURARI NEW DELHI 110084 | NEW DELHI | CENTRAL DELHI | DELHI | 110084 | 3 | Rejected-Finance Being other than L-1 | |
| 4 | 4₹39.4 L+₹3.4 L (9.57%)Rejected-Finance 58 SHAHEED NAGAR OPP BHIMRAO AMBEDEKAR UNIVERSITY RBL ROAD LUCKNOW 226025 UP | LUCKNOW | LUCKNOW | UTTAR PRADESH | 226025 | 4 | Rejected-Finance Being other than L-1 | |
| 5 | 5₹40.1 L+₹4.2 L (11.5%)Rejected-Finance RZ9 7 GALI NO 2 KAILASH PURI PALAM NEW DELHI 110045 | NEW DELHI | NEW DELHI | DELHI | 110045 | 5 | Rejected-Finance Being other than L-1 |
Tender Value
₹48 L
EMD Value
₹96,000
Closing Date
29 Aug 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE EAST LUCKNOW
GE EAST LUCKNOW
SPL REPAIR TO BLDG. NO P-31 (OR MD ACCN - 08 NOS ) AT RA BAZAR AND CERTAIN OTHER WORKS UNDER GE (EAST) LUCKNOW
2022_MES_541127_1
GE/E/LKO/T-33 of 2022-23
Open Tender
Civil Works
Item Rate
180 days
GE EAST LUCKNOW
Please refer Tender documents.
4 documents required · 4 mandatory
₹500
GE EAST LUCKNOW
₹96,000
Yes
21 Sept 2022
26 Jul 2022
31 Aug 2022
26 Jul 2022
29 Aug 2022
9 Aug 2022
Amount
Taking down cement plaster or cement lime plaster on PCC/stone surface/brick surfaces including raking out joints hacking for key scrubbing down with water etc complete all as specified and directed.
Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc. complete all as specified and directed.
M&L for 10mm thick cement plaster on other than fair faces of brick work or concrete surfaces in CM 1:6 finished even and smooth complete all as specified and directed
M&L for rendering 10 mm thick in cement mortar 1:6 on fair faces of brick work of walls, finished even & smooth without using extra cement etc complete all as specified and directed.
M&L for rendering 15mm thick in CM 1:4 on external surfaces of walls & chajja/roof/ceiling mixed, facia at any height with liquid water proofing compound as per manufacturer's instruction surface finished even and smooth without using extra cement complete all as specified and directed. (Note:- WPC shall be measured and paid separately)
M&L for 20 mm thick cement plaster (on roof projection, chajja, ceiling etc) in CM(1:3) mixing an integral waterproofing compound, Sika Cim @ 100 gms per bag of cement over 1st coat of Sika® Topseal 107, acrylic polymer modified cementations waterproofing coating, incl 2nd coat of Sika®Topseal 107, acrylic polymer modified cementations waterproofing coating, finished the surface even and smooth without using extra cement including necessary scaffoldings complete upto G+2 Floor Buildings complete all as specified and directed.
M&L for rendering 5 mm thick in CM 1:3 on RCC ceiling surface complete all as specified and directed .
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.
M&L glazed ceramic joint free coloured tiles in vertical surfaces 600x300x7mm thick, set and joiunted in neat cement slurry and pointed in coloured cement to match over and including 10mm thick screed bed in cement mortar 1:3 complete all as specified and directed.
M&L coloured non skid ceramic jointless tiles 7 to 8mm thick (square/rectangular) area of each tile exc 0.11 Sqm but not exc. 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed or bedding layer with CM 1:4 complete all as specified and directed.
M&L for non skid ceramic (coloured) jointless tiles of 7 to 8 mm (square or rectangular) area of each tile exc 0.18 sqm but not exc 0.38 sqm in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match coloured tiles over and including 15mm thick screed CM 1:4 complete all as specified and directed.
All as per item No 11 but on skirting
M&L for Vitrified Ceramic tiles double charge/dark shade 10 mm thick (square/ rectangular) polished, area of each tiles exc 0.42 sqm, and n.exc 1 Sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 15mm thick screed bed in cement & sand mortar 1:6, complete all as specified and as directed.
All as per above item No. 13 but on vertical surfaces including 10mm thick screed plaser in CM 1:4 complete all as specified. complete all as specified and directed.
M&L for vitrified ceramic tiles 10mm thick (square/rectangular), polished, coloured (dark shad) area of each tile not exc 0.36 sqm, on vertical surfaces such as dado, skirting etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 10 mm thick cement plaster in CM (1:4) etc complete all as specified and directed.
M&L for complete removal of existing treatment on wall including cleaning of mortar drops, smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots etc and preparation of old surfaces (plastered or unplastered) of walls and applying two coat of OBD on wall with one coat of primer etc complete all as specified & directed.
Taking down chowkats with shutters not exc 1.5 Sqm each (without taking off shutters from the frames) complete all as specified and directed
Taking down chowkats or frames with shutters (without taking off shutters from the frames) exc 1.5 Sqm but not exc 4 Sqm each complete all as specified and directed
Taking down Shutter exc. 1 sqm and not exc . 2 sqm each complete all as specified and directed
S&F for pressed steel frames size 105 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. incl filling cement concrete type B-1 (1:3:6) filling and cpaction in frame complete all as specified and directed
S&F 125x60mm size of pressed steel frame for door with one or more rebates including necessary fixing lugs, lock striking plates, hinges, hold fast (FI 40x3mm) etc. complete all as specified and directed.
M&L for 30 mm thick flush shutters, solid core construction, with block board 3 core and plywood face panels, commercial type on both sides complete all as specified and directed
M&L second class hardwood glazed and skeleton door shutters, 35mm thick, open rebated and prepared to receive glass, gauze, etc. (with sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beeds for securing glass etc. and fitted to chowkats complete all as specified and directed
S&F powder coated(min thickness of powder coating 50 micron) anodised aluminum window shutter three track sliding type, section having frame size bottom with outer 92x45.5x1.5mm (section code 20617) , top and side 92x31.75x1.5 (section code 20831) & aluminum section of shutter top and bottom size 40 x 18 x 1.5 ( section code 20736) , interlock size 40 x 18x 1.45 (section code 20737), side/ middle size 40 x18 x1.55, (section code 20738) including necessary joining cleats, glazing clips rubber backing, anodised aluminum snap beading screw, anodised aluminum fitting complete as per site requirtement glazing by using 5mm thick plain sheet glass and ss wiremess of dia 0.36mm and aperture 1.4mm thick all as specified and directed. Ref drg no celz/c-td/151 sheet no 1/1 & 2/2 . Note- 1. Glazed shutter glass thickness not less than 5mm and ss wiremess shutter with ss wiremesh as approved by GE is also included. No payment will be made separately. 2. No extra payment will be made for section profiles of higher sizes.
S&F powder coated aluminum ventilator ( louvers) shutter with 3.8 mm thick plain / tinted glass consisting of frame of size 63.5 x 44 and shutter sections weighing not less than 0.55 kg/m with locking arrangement as approved fixed including necessary joining cleats, glazing clips, rubber packing, powder coated aluminium snap beading, screws, powder coated aluminium fittings with stainless steel wiremesh of 0.36mm including necessary fixing arrangement complete all as specified and directed
M&L mild steel 300mm ordinary rat tail rod patttern springs includding roller and roller plate complete all as specified and directed.
S&F aluminium anodised barrel tower bolts of extruded section 200mm long complete all as specified and directed.
S&F for 300mm aluminium alloy anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing boltscomplete all as specified and directed.
S&F for aluminium handles cast type anodised of 150mm complete all as specified and directed
S&F 100 mm size butt hinges, stainless steel, complete all as specified and directed.
S&F of factory made Solid UPVC frame (Single Rebated) of size 60mm x 30mm made out of solid UPVC foam with homogenous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100 x 8 sheet metal CSK screws complete all as specified and as shown on drawing. (Note :- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life)
S&F of Factory made soild uPVC profiled panel door shutter 28mm thick with integral skin as frame & 3mm thick high pressure compact laminate on both side of approved colour as infill, with 'C type Gl or 40 x 20 x19 of MS pipe as stiffner & supplying & fixing in frame at site as per specifications & drawing complete all as specified and directed.
S&F framed work such as grills, gratings etc with ends of bars shouldered and or rivetted or forged into spikes, framed guard bars and similar work conferming to Fe- 290-0 Gde-E-165 complete all as specified and directed.
S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm fixed with tinned tacks or galvanised wire staples complete all as specified and directed.
S&F stainless steel wire clothes 0.56 mm nominal dia of wire and average width of operturel 1.18 mm complete fixed stables all as specifed and as directed.
Demolition of reinforced cement concrete of any position, any height, and any description not otherwise specifically provided for complete all as specified and directed
M&L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exc 200mm thick (Horizontal or sloping) complete all as specified and directed
S&F for 10mm dia TMT bars and over cut to length, bent to shape etc. including cranking and binding with M.S wire not less than 0.9mm dia complete all as specified and directed
M&L for RCC 1:2:4 20 mm graded stone aggregate in slabs supported on walls, beams and columns in floors roofs, landing, balconies canopies, deck slabs and in shelves and the like complete all as specified and directed
M&L for 18-20 mm thick granite for (of any type) machine cut and polished in steps, jambs, pillar window cill, cooking plateform etc laid over 20 mm thick screed bed in CM 1:4 , bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and directed
M&L for form work to soffits of suspended slabs, such as shelves and similar work not exc. 200 mm thick for flat rough finish surfaces complete all as specified and directed
S&F sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed
S&F in repair stainless steel kitchen plate rack wall mounted of overall minimum size 750x600mm and 250 mm deep, with partition for small/large plates etc made out of stainless steel 24 gauge, fixed with rawl plug and CP steel screws all as specified and directed weight of rack shall not be less than 3.8 kg complete all as specified and directed.
S&F in repair Vitreous china wash squatting pattern closet 'Orissa pattern white, size 580 x 440mm with S or P trap, integral foot rests, with and including PVC low flushing cistern 10 litre capacity white with all fittings, fixtures including brackets and 32mm bore PVC flush pipe complete all as specified and directed
S&F in repair vitreous China wash basin white (flat back or angle back ) type of size 550mmx400 mm including brackets,brass cromium plated waste fittings and PVC waste pipe including cutting for and pinning in ends of bracket complete all as specified and directed
S&F in repair 15mm bore CP bib tap long body pattern with flange/cap cast copper alloy chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipes complete all as specified and directed
S&F in repair 15mm bore CP pillar tap, push type, cast copper alloy, with capstan heads, chromium plated, screwed down, high pressure fancy type with long shanks and fly nuts, screwed for iron pipe complete all as specified and directed
S&F 15mm bore pillar taps cast copper alloy with capstan heads chromium plated screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts screwed for iron pipe complete all as specified and directed
S&F in repair 15mm bore stop cock /angle cock cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipes complete all as specified and directed
S&F in repair 15mm dia concealed stop valves concealed type CP with fancy type,chromium plated with long shank and cup, fixed in repair complete all as specified and directed
S&F PVC connections 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed
S&F in repair PVC connection, 450mm long with brass CP/PTMT nuts suitable for connecting 15mm bore pipes, superior quality complete all as specified and directed.
S&F for brass chromium plated shower rose 65 to 90 mm size with swivel joints,and connecting rod including fixing to steel pipe or union complete all as specified and directed.
S&F in repair 20 to 25mm bore PVC Coated fancy type curtain rod with fixing brackerts, stops, rollers etc complete allied fitting complete all as specified and directed.
S&F satinless steel curtain rails with bracket at two ends,complete all as specified and directed.
S&F repair tubular towel rail, brass chromium plated 20 mm dia, D type, 60 cm long between flanges complete all as specified and directed.
Supply only sheet glass shelf assembley consisting of 5.5 mm thick sheet glass shelf 12cm wide with cromium plated bracket guard and railing 60cm long complete all as specified and directed.
S&F glass corner shelf assembly, fancy type, made of 6 to 7mm thick sheet toughened glass of size 250x250mm, fixed with CP brackets, complete all as specified and directed.
S&F sheet glass 3 mm thick ordianary quality and galzing with wooden beads or oil putty in square n.exc 0.5 Sqm in each pane complete all as specified and directed.
Demolition and breaking up 75 mm dia and above drain pipe( Salt glazed ware, AC,PVC or Reinforced concrete) set in cement mortar complete all as specified and directed.
M&L for 75 mm bore PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.
S&F 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.
S&F 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.
S&F 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.
S&F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.
S&F 75 mm bore PVC (SWR) bends any radius complete all as specified and directed.
S&F 110 mm bore PVC (SWR) bends any radius complete all as specified and directed.
Taking up or down steel tubing and connections, 15mm bore and removing from site complete all as specified and directed.
Taking up or down steel tubing and connections, 20mm bore and removing from site complete all as specified and directed.
Taking up or down steel tubing and connections, 25mm bore and removing from site complete all as specified and directed.
S&F steel water tubes medium grade, galvanised with all fittings 15mm bore fixed complete to concilled in walls and ceiling or laid in floors complete all as specified and directed.
S&F steel water tubes medium grade, galvanised with all fittings 20mm bore fixed complete to walls and ceiling or laid in floors trenches complete all as specified and directed.
S&F steel water tubes medium grade, galvanised with all fittings 25mm bore fixed complete to walls and ceiling or laid in floors trenchescomplete all as specified and directed.
Dismantling water tanks capacity exc 250 & not exc 500 ltrs, and removing to site complete all as specified and directed.
S&F 500 Ltr capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top)in white colour triple layered, hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed
S&F in repair 25 mm PTMT float valve, high pressure with Polythene float and flynut complete, screwed for Iron pipe etc complete all as specified and directed.
S&F 20 mm dia brass gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.
S&F in repair gun metal gate valves, with iron wheel head, screwed both ends for iron pipe and fixed of 25mm dia complete all as specified and directed.
S&F PVC Cupboard / kitchen cabinet shutter with frame including shelves made of 18mm thick One Side Decorative Lamination & Other Side Balancing Lamination Sheet & Provision of Shutters Made Out of 18 mm thick One Side Decorative Laminated PVC Sheet all required Brackets SS screws etc. The Panels Shall be fabricated using adhesive and Screws where ever Required. All the edges shall be covered with 2 mm thick edge bonding tape or 900 edge bent finish complete all as specified and directed.
M&L for preparation of new surfaces of wood or wood based materials of any description over 10 cm width or girth and applying two coats of synthetic enamel paint of approved tint over a coat of pink primer complete all as specified and directed.
M&L for preparation of new or previously untreated steel surfaces of any description not otherwise described over 10 cm width or girth, and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
M&L for one coat of painting with synthetic enamel paint on old steel surface (previously decorated ) including preparation of surfaces complete all as specified and directed.
M&L for one coat of synthetic enamel painting including preparation of old wooden surface over 10 cm width or girth complete all as specified and directed.
M&L for preparation and applying two coats of oil emulsion distemper over a coat of putty on new plastered surfaces complete all as specified and directed.
M&L for preparation of new plastered surfaces of walls and applying two coats of oil emulsion distemper (OBD) of approved shade over a coat of primer complete all as specified and directed.
M&L for preparation of new plastered surfaces of wall and applying three coat of white wash complete all as specified and directed
M&L for preparation and applying two coats of cement base paint over a coat of cement primer on new plastered surface of wall complete all as specified and directed.
M&L for preparation and applying two coat of white wash on new plastered surface of ceiling complete all as specified and directed.
Complete removal of existing treatment on walls (any number of layers) by scrapping with steel scrappers or any other means, including filling depression of scrapped surfaces with putty and applying two coats of oil bound distemper complete all as specified and directed.
M&L for preparing old decorated surfaces by brooming down or steel wire brushing, scrapping down smoke soot mould, moss and treading oil and greasy spots from plastered or unplasterd surfaces of ceiling including cornices, pilasters etc and applying one coats of white wash complete all as specified and directed.
M&L for preparation of newly plastered surfaces of wall & applying two coats of cement base paint over a coat of alkali resistant primer of approved shade/tint complete all as specified and directed.
Complete removal of existing treatment on walls (any number of layers) by scrapping with steel scrappers or any other means, including filling depression of scrapped surfaces with putty and applying two coat of cement base paint complete all as specified and directed.
M&L for preparing old decorated surfaces of wall by brooming down or steel wire brushing including cornices, pilasters etc and applying one coat of white wash complete all as specified and directed by engineer in charge.
M&L for preparation of old surface of wall, applying 2 mm thick wall care putty over plastered surface to prepare the surface even and smoot then after two coats of plastic emulison paint of approved shade complete, as per manufacturer's specification complete all as specified and directed.
M&L for preparation of old surface of ceiling, applying wall care putty of 2 mm thickness over plastered surface to prepare the surface even and smooht then after two coats of plastic paint complete, as per manufacturer's specification complete all as specified and directed.
Supply only integral water proofing compound, ISI Marked complete all as specified and directed.
M&L PCC 1:3:6 type C-1 using 20 mm graded stone aggregate for filling in bed block of hold fast etc complete all as specified and directed.
M&L for 75 mm thick PCC 1:3:6 type C1 using 20 mm graded crushed stone aggregate as in plinth protection surface finished fair and even complete all as specified. Note :- Plinth protection shall be of width as directed and shall be laid to slope of 1:30 in alternative bays not exc 3 meter in length. Joints of 6 mm wide and 10 mm deep shall be provided along the wall and bays and same shall be filled with bitumen mastic (1:3) complete all as specified and directed.
M&L for 75 mm thick PCC 1:3:6 type C-2 using 40 mm graded stone aggregate as in plinth protection laid in bays not exc 1.5m with expansion joints 30x10mm filled with mixture of hot bitumen and sand, finished the surface even and smooth without using extra cement complete all as specified and directed.
Dismantling brick tiles or terracing tiles, single layer of roofs complete all as specified and directed.
Demolition of cement concrete in ground floors and paving not exc 15 cm thickness (below or above ground level etc all as specified and directed.
Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.
Taking down existing treatment any type/any thickness on roof including taking down/removing the backing bed concrete if any and dispose off at a distance exc 100m complete all as specified and directed
M&L for brushing neat cement slurry with 3.0 Kg/Sqm over roof slab complete all as specified and directed
M&L for cement concrete type B-1 1:2:4 as in coping, cills, steps, plinth courses, complete all as specified and directed.
M/L for PCC 1:2:4 type B1 using 20mm graded stone aggregate as in foundation/Footing complete all as specified and directed.
M&L PCC 1:2:4, type B1 using 20 mm graded stone aggregate as in roof padding/ roof kerbs/ benching/ covered fillets etc rounded or chamfered on edges, complete all as specified and directed.
M&L 25mm thick PCC (1:2:4) type B 1 (using 12.5 mm graded aggregate) as in floor etc complete all as specified and directed.
M&L for 40mm thick cement concrete type 1:2:4 type B-1 (20mm graded aggregate) as in floors, finished even & smooth using extra cement complete all as specified and directed
Supply only glass dividing strips, 3mm thick and 38 mm wide complete all as specified and directed
M&L for 75 mm thick P.C.C 1:4:8 type D2 using 40 mm graded stone aggregate as in sub base of floor of shed etc complete all as specified and directed.
M&L for hard core of brick aggregate of guage not exc 63 mm deposited, spread, levelled and rammed to a true surface, complete all as specified and directed
S&F 60 mm thick, machine pressed rubber moulded, glossy coloured, precast conctete interlocking paver block any shape and size of M-35 grade of approved shade laid over 50mm thick sand cushion and filled with fine sand complete all as specified and directed.
M&L for roof /sunken treatment with polymeric water proofing membrane with certain specification given below as under complete all as specified & directed (a) M&L plastering 10mm in CM 1:4 using 100% coarse sand on roof including WPC @ 3% by weight of cement. (b) Applying a coat of bitumenous primer @ 0.50 LTRs /Sqm and allow to dry (c) Applying a coat of hot blown bitumen grade 85/25 @ 1.20 Kg/Sqm. (d) Supply and laying APP based polymeric water proofing membrane, weight not less than 3.00 kg/sqm and and minimum 3 mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) sealed the side laps with spread temper (e) applying a tack coat of hot blown bitumen grade 85/25 @ 1.20 Kg/Sqm
S&F 25cm x 25cm x 22 mm thick cement concrete tiles jointed and pointed in CM 1:4 mixed with linseed oil @ 5% by weight of cement over and including screed bed or bedding layer of mortar 15 mm thick on roof slab in CM 1:4 mixed with water proofing compound @ 3% by weight of cement complete all as specified and directed. (Note:- WPC Shall be measured and paid seperately).
Taking down loose filling of aggregate in any form from sunken slab and refiiling after treatment complete all as specified and directed
M&L for PCC 1:5:10 type E-2 (using 40 mm graded stone aggregate) as in mass concrete of floor etc complete all as specified and directed.
Demolition of brick work built in cement mortar or cement lime mortar including all of quoins, arches, pillars etc, but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and directed.
M&L brick work with fly ash bricks, straight or curved on plan exc 6M mean radius, old size brick built in CM 1:6 complete all as specified and directed
M&L fly ash brick work using old size bricks with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:4 in half brick thick wall complete all as specified and directed.
S&F continuous piano hinges, mild steel bright finished or electro galvanized with width of flap 30mm when open complete all as specified and directed.
M&L magnet ball catcher for cup board shutters complete all as specified and directed.
S&F second class hard wood plain, soild chowkhats and frames wrought, framed rebated on the solid rounded or chamfered put together with glue pined at jints complete all as specified and directed.
S&F mild steel holdfast, hook and pintle hinges, large hasp and staples, clamps, hooks for hanging fans and similar small articles conforming to Grade E-165 (Fe 290) including necessary welding etc. and fixed in position complete all as specified and directed.
M&L for mild steel work as in tubular trusses incl special shaped washer etc complete using ERW or induction butt welded tubes confirming to IS-1161-11979 Gde St 270 complete all as specified and directed.
S&F rolled mild steel work in Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. complete all as specified and directed.
S&F MS Screw bolts 12mm dia (machine made ) with hexagonal or square heads at one end and screwed at the other end or screwed both ends, each screwed end to be fitted with washers and one end hexagonal or square nut, diameter of shank 11 to 15 mm, length of bolt not exc 5 cm long complete all as specified and directed.
S&F brass mortice lock, vertical type, size 100mm complete all as specified and directed.
S&F 12 mm thick medium density fibre board, exterior grade, fixed to timber frame work,complete all as specified and directed.
M&L PU polish on wooden based material of any description width of grith including removing/cleaning and preparation of the surface including a coat filler with two or more coats as approved complete all as specified and directed.
S&F block boards, grade 2 quality, inerior grade, decorative type with decorative face veneer on one face incl PVC/CP channel for casing end of shelf incl necessary adhesive and fixture, complete all as specified and directed.
S&F 30 mm thick Ist class hard wood locally fabricated glazed and skelton window or ventilator shutter open rebated and prepared to receive glass etc divited into square with plain chamfered or rounded, mitred beads for securing glass/gauge complete all as specified in SSR Part-I 1991 section 8 clause 8.20 (b) complete all as specified and directed.
S&F brass barrel tower bolts, 100 mm long ISI market stove enamelled block with bright bolt and fixed complete all as specified and directed.
S&F brass handles, oval type ISI marked stove enamelled black complete all as 125 mm size specified and as directed.
S&F butt hinges 75 mm size, ISI market cast brass mild with mild steel weight cold rolled mild steel and fixed complete all as specified and as directed.
S&F 605 x 605 mm GI frame work for seamless ceiling comprising of GI perimeter channel 0.55mm thick with two unequal flanges of 20 and 30 mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre / intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (Not exc 1.2m length) of 0.55 mm thick ness having kurled web of 50mm and flanges of 26 mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre including hangers 6mm dia gI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5 mm dia 40mm long complete all as specified and directed.
M&L providing and fixing gypsum board 12 mm thick in ceiling fixed with screw as per manufactures instruction complete all as specified and directed.
Dismantling of asbestos cement (corrugated, semicorrugated) sheets in roof covering etc complete all as specified and directed. (Note - Work on slopping roof and height up to 10 mtr approx)
S&F 6 mm thick asbestos cement, corrugated or semi-corrugated sheets in roofs, wall fixed with L-type or J-type or cranked hook bolts etc complete all as specified and directed. (Note - Work on slopping roof and height up to 10 mtr approx)
S&F asbestos cement one-piece plain angular ridge 6 mm thick fixed with L-type or J-type or cranked hook bolts etc complete all as specified and directed. (Note - Work on slopping roof and height up to 10 mtr approx)
Dismantling timber scantling 40 sq.cm and over in section, in any position etc all as specified and directed.
S&F second class hard wood timber scantling clean sawn fixed for roofs sheets etc all as specified and directed.
S&F false ceiling with 4mm thick E-coard Everest make white prelaminated set embosed rainforced designer ceiling board of approved texure fixed with GI imposed grid frame work of size not more than 600x800mm having 24mm wide T-section runner made of 0.33mm GI sheet and angle made of 0.45mm, GI sheet suspended with 4mm dia GI wire including two coat of plastic emulsion paint over one coat primer complete all as specified and directed. (Note:- All exposed surface of grid work shall be powder coated white)
M&L for applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, alkali & fungal resistant, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm over new surfaces etc complete all as specified and directed. (Note - Painting on AC including roof sheet upto height approx 10 mtrs)
Excavating in post holes (or similar holes) in soft/loose soil, each n exc 0.5 cum (0.55mX0.55mX1.5m deep), getting out, and removing soil to a distance not exc 50m complete all as specified and directed.
Surface excavation not exc 30cm deep and averaging 15cm deep and getting out in hard/dense soil complete all as specified and directed.
S&F pre-painted galvalume aluminium zinc coated GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering,cladding to wall etc, fixed with self tapping screws complete all as specified and directed.
S&F 32mm waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end complete all as specified and directed.
S&F 32 mm bore Low density polyethylene pipes for Wash hand basin etc complete all as specified and directed.
Taking down carefully copper / aluminium point wiring (light, fan, socket or power) complete including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc for taking credit including making good the disturbed surfaces to match with the existing complete all as specified and directed.
Material and labour for one light / fan point controlled by one, one way switch 06 Amp wiring with 1.5 Sq mm nominal cross sectional area, single core, 1100 Volt grade, multi-stranded, PVC insulated, unsheathed FRLS copper conductor cable with and including continuous earth wire of size 1.5 Sq mm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable and connected to common earth and earth dolly with suitable copper lugs and drawing into and including rigid non-metallic PVC conduit of 20 mm dia or higher, medium grade complete with and including all PVC conduit accessories concealed into wall by cutting of chases in wall and replacement of sunk zinc coated pressed steel terminal box of 1.60 mm thick with 3 mm thick plastic laminated sheet top cover, brass screws, cup washers etc and making good to the disturbed surfaces to match the existing complete all as specified and directed.
All as per serial item No 152 here-in-before but one bell point controlled by one bell push, 06 Amp.
All as per serial item No 152 here-in-before but one, two way light point controlled by two, two way switches, 06 Amp.
All as per serial item No 152 here-in-before but one 3 pin, 06 Amp socket outlet point on independent board controlled by one, one way switch 06 Amp.
All as per serial item No 152 here-in-before but one 3 pin, 06 Amp socket outlet point on same board controlled by one, one way switch 06 Amp.
All as per Serial Item No 152 here-in-before but point wiring with 2.5 Sq mm single core FRLS cables and earth continuity wire of 1.5 Sq mm single core FRLS cable for one 3 pin 16 Amp socket out let point controlled by one, one way switch on independent board complete all as specified and directed.
Supply and fix switch piano flush type, 06 Amp, single pole, one way, 230 Volt complete all as specified & directed.
Supply and fix switch piano flush type, 06 Amp, single pole, two way, 230 volt complete all as specified & directed.
Supply and fix bell push, flush type, 06 Amp, 230 volt complete all as specified & directed.
Supply and fix socket outlet 2 in 1, 5 pin, 06 Amp, flush type, 230 volt complete all as specified & directed.
Supply and fix switch socket combination outlet 2 in 1, 3 pin, 06 Amp and 16 Amp flush type, universal, 230 volt, four hole complete all as specified & directed.
Supply and fix ding dong bell, AC, 230 volt, single pole complete all as specified & directed.
Supply and fix electronic ceiling fan regulator with rotary step, two module, humfree, AC, 240 volt, 100 Watt and duly ISI marked complete all as specified & directed.
Supply and fix lamp holder, PVC / Polycarbonate type with back plate suitable for batten fitting complete all as specified & directed.
Supply and fix in replacement of decorative wall mounting type LED light fitting, 1 x 15 Watt, 230 Volt made up of Polycarbonate including shade, lamp holder, 9/10 Watts LED lamp B22 CDL etc and all accessories pre-wired including connecting up complete all as specified and directed.Make :Philips, Cat No : 30575 (Comet) or equivalent in Havells, Cat No : LHDL06160099 (CITY 3).
Supply and fix in replacement of integrated LED bulk head fitting 10 Watt, 6500K with IP 65 protection comprises of high pressure die cast aluminium housing, polycarbonate cover, etc complete all as specified and directed. Make : Crompton, Cat No : LBHE-10-CDL or equivalent in Havells, Cat No : RUGBYNEONFT10WLED760SSYMBOPC, PHILIPS Cat no WT202WLED6SCWPSUS2PC
Supply and fix in replacement of single side connection LED T8 tube light rod 20 Watt, 6500K of four feet long into and including LED tube light fixture of four feet long with T8 push fit type holders, connector block, end caps, etc including connecting up complete all as specified and directed. Make : Crompton, Cat No : IGP131LT8-16& LT8-20-865-2 or Havells, Cat No : REGALBATTENT8UPT01X22WSSBS & PHOTONULTRA1213T8SSTL20WLED865SPC, Philips cat no TMC 501P1XT-LED22W P 3241
Supply and fix in replacement of single side connection LED T8 tube light rod 8 Watt, 6500K of two feet long into and including LED tube light fixture of two feet long with T8 push fit type holders, connector block, end caps, etc including connecting up complete all as specified and directed.Make : Crompton, Cat No : DMLN1LT8-8& LT8-8-865-2 or equivalent in havells / Philips
Supply & fix LED wall/surface mounted down lighter, 12 W including electrical connection with PVC three core copper flexible wire & all necessary fixing accessories complete all as specified. Make:- Crompton Model-LCDSPLN-R12-CDL or equivalent in Havells / Philips / Bajaj
Supply and fix LED security light fitting 45 watt, 5700K with IP 66 protection comprises of a pressure die cast aluminium housing, heat resistance toughened glass, LED lenses, surge protector, electronic driver, etc and all accessories pre-wired including connecting up with PVC insulated copper conductor cable 1.5 Sq mm, 3 core as required for connections and 32 mm bore light grade GI tube mounting bracket of 1.5 metre in length, bend to shape at 140 degree in ‘L’ shape and fixed to wall by means of 02 nos. of 40 x 5 mm flat iron clamps, nuts, bolts and washers etc complete all as specified and directed.
Supply and fix ceiling rose, 6 Amp, 250 volt, AC, ISI marked with three equal size terminals and PVC / Polycarbonate insulated body of 50 x 25 mm size complete all as specified & directed.
Taking down carefully ceiling fan of any sweep complete with all accessories, dismantling blades and deposit in safe custody of AGE E/M Yard-II and refixing after repair complete all as specified & directed.
Material and labour for sub main wiring with 06 Sq mm nominal cross sectional area, two single core, 1100 Volt grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable with and including continuous earth wire of size 06 Sq mm nominal cross sectional area, single core, 1100 Volt grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable and connected to common earth and earth dolly with suitable copper lugs and drawing into and including rigid non-metallic PVC conduit of 25 mm dia, medium grade complete with and including all PVC conduit accessories concealed into wall by cutting of chases in wall and making good to the disturbed surfaces to match the existing including taking out the unserviceable sub main wiring complete all as specified & directed.
Material and labour for sub main wiring with 04 Sq mm nominal cross sectional area, two single core, 1100 Volt grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable with and including continuous earth wire of size 04 Sq mm nominal cross sectional area, single core, 1100 Volt grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable and connected to common earth and earth dolly with suitable copper lugs and drawing into and including rigid non-metallic PVC conduit of 25 mm dia, medium grade complete with and including all PVC conduit accessories concealed into wall by cutting of chases in wall and making good to the disturbed surfaces to match the existing including taking out the unserviceable sub main wiring complete all as specified & directed.
Supply and fix in replacement of industrial type SPN enclosure with a two pin and earth plug and socket complete with and including MCB, SP, AC, 240 volt of 20 Amp, 'C' curve 10 KA breaking capacity and flush to wall including all cuttings & chases etc in wall and making good to the disturbed surfaces to match the existing complete all as specified & directed.
Supply and fix in replacement of sheet metal enclosure distribution board, double door, single pole and neutral, AC, 240 volt, 08 way, with 200 Amp rated copper bus bar and metal door with IP - 43 & IK 09 protection along with cable end box for above DB and flush to wall including all cutting etc in wall and making good to the disturbed surfaces to match the existing complete all as specified & directed.
Supply and fix in replacement of sheet metal enclosure distribution board triple pole and neutral (VTPN),double door, AC, 440 volt, 04 way with 200 Amp rated copper bus bar and metal door with IP 54 & IK 09 protection along with cable end box for above DB and flush to wall including all cutting etc in wall and making good to the disturbed surfaces to match the existing complete all as specified & directed and comprising of the following:- (a) MCCB, 125 Amp, 04 pole, AC, 415 Volt of 16 KA breaking capacity complete - 01 No. (b) MCB, SP, AC, 240 volt of 06 to 32 Amp, "C" curve, 10 KA breaking capacity - 12 Nos.
Supply and fix in replacement of MCB, SP, AC, 240 volt of 06 to 40 Amp capacity "C" curve, 10 KA breaking capacity and making connections by using suitable copper lugs complete all as specified & directed.
Supply and fix in replacement of MCB, DP, AC, 240 volt of 32 Amp capacity "C" curve, 10 KA breaking capacity and making connections by using suitable copper lugs complete all as specified & directed.
Material and labour for earthing complete with galvanised mild steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried vertically in ground (earth pit not less than 2.25 metre deep below ground level) with top edge of the plate not less than 1.5 metre below normal ground level steel earth plate connected with GI wire 04 mm dia by means of lug, bolts, nuts, check nuts, washers of galvanised iron or steel GI protection pipe 15 mm bore light grade all as shown in elect plate No 3 on serial page No 497 of SSR part I - 2009 and connecting to main switch board / Main DB’s including excavation, earth work, salt and charcoal dust mixed and packed 150 mm thick around GI earth plate, GI pipe medium grade 20 mm nominal bore watering pipe GI sheet funnel wire mesh, concrete pit, RCC cover 40 mm thick in PCC 1:2:4 type B1 duly reinforced with MS Bars 6 mm dia at the rate of 75 mm centre to centre both way with 12 mm dia lifting handle and pit / chamber in PCC 1:3:6 type C1, Angle iron 40 mm x 40 mm x 3 mm frame for pit cover including testing on completion complete all as specified and directed.
S&F of exhaust fan single phase, 230/240 Volt heavy duty of size 300 mm sweep 1400 RPM including suitable louvers and making connection with twisted copper flexible wire 23/0.076mm all as specified and directed.
S&F exhaust fans, plastic body, AC, single phase, 230/240 v of size 200 mm sweep with louver and making connection with twisted copper flexible wire 23/0.076mm all as specified and directed
Cutting walls any type, making holes for fixing of exhaust fan of any size or sweep and making good surface with fine plastering, finishing and colouring with existing colour matching complete all as specified and directed
Taking down electric meter and refixing on same board after rewiring all as specified and directed.
Supply only LED bulb 9/10 Watts suitable for B22 white in colour all as specified and directed. Make:- Havells/ Crompton/Bajaj
Supply and fixing of stationery storage type electric BEE 5 star rated Hot Water Geyser of capacity 25 Ltr to operate on 230 volt AC, vertical type, white in colour, working pressure min 0.8 Mpa with glass lined coated tank, , adjustable thermostat, heating element 2 KW, ABS plastic body, including 4 nos full threaded fastner of size 100 x 10 mm with 2 Nos washer, pvc hot series pipe 2 nos, metallic base and top complete all as specified and directed.
Supply and fixing in repair inner plate & white cover plate with frame, 1 modules complete all as specified and directed.
Supply and fixing in repair inner plate & white cover plate with frame, 2 modules complete all as specified and directed.
Supply and fixing in repair inner plate & white cover plate with frame, 3 modules complete all as specified and directed.
Supply and fixing in repair inner plate & white cover plate with frame, 6 modules complete all as specified and directed.
Supply and fixing in repair inner plate & white cover plate with frame, 8 modules complete all as specified and directed.
Supply and fix in repair terminal box suitable one modular plat of size 75X75x50 mm including cutting, grooving and plastering etc. complete all as specified and directed.
Supply and fix in repair terminal box suitable three modular plate of size 100X75x50 mm including cutting, grooving and plastering etc. complete all as specified and directed.
Supply and fix in repair Modular switch one way 6A 230V AC 50 HZ SP one module complete all as specified and directed.
Supply and fix Modular switch one way 16A 230V AC 50 HZ SP one module complete all as specified and directed.
Supply and fix in repair Modular socket 2/3 pin combined 6A 230V AC 50 HZ SP two module complete all as specified and directed.
Supply and fix in repair Modular socket 6A/16A 2/3 pin combined 230V AC 50 HZ SP two module complete all as specified and directed.
Supply and fix in repair Wall mounted fancy light fitting of oval shape including bulb Make:- philips Cat No- 31425 or equivalent as approved by GE.
Supply and fix in repairs MCCB DB VTPN 12 way double door type suitable for TP/FP including necessary dummy plate and necessary civil works complete all as specified and directed. Make: Havells Cat No DHDLVDRWAOFO08 or equivalent in Legrand/ L&T
Supply and fix in repair MCB SPN 230V, 6-32 Amps capacity complete all as specified and directed.
Supply and fix in repair MCB TPN 415V, 32 to 63 Amp capacity complete all as specified and directed.
Supply and fix in repair MCB TP 415V, 32 to 63 Amp capacity complete all as specified and directed.
Supply and fix in repair MCCB FP 415V, 100Amp 25KA breaking capacity complete all as specified and directed.
Supply and fixing in repair 15 watt LED Light Fitting recessed mounted full open with required all electrical connection with suitable wire complete all as specified and directed.
Cutting chases in concrete wall/stone for laying PVC conduit and making good to facings where required and pointing in cement mortar 1:3, and making good, cutting not exc 20 cm girth complete all as specified and directed.
M/S RAJ INTERIORS
QUALITY CONSTRUCTIONS CO
M/S S S A ASSOCIATES
Adhunik Builders
M/S S&R Construction
M/S R J CONSTRUCTION CO
Rakesh Traders
M/s Sudhir Enterprises
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .