Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹63.3 LAccepted-AOC CAMP AT GORUBANDHA MISSAMARI ASSAM 784506 | SONITPUR | ASSAM | 784506 | L1 | Accepted-AOC BEING LOWEST BIDDER | |
| 2 | L2₹69.4 L+₹4.2 L (6.50%)Rejected-Finance HARIGAON PO NIKAMUL SATRA DIST SONITPUR ASSAM PIN 784001 | SONITPUR | ASSAM | 784001 | L2 | Rejected-Finance HIGH BID VALUE | |
| 3 | Rejected-Technical MISSAMARI DIST SONITPUR ASSAM 784 506 | SONITPUR | ASSAM | 784506 | - | Rejected-Technical DOES NOT BELONG TO APPROPRIATE CATEGORY. HENCE, NOT RECOMMENDED FOR OPENING |
Tender Value
₹69.5 L
EMD Value
₹1.3 L
Closing Date
19 Nov 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
COL GANESH ZAPE
HQ CWE TENGA PIN- 900194 C/0 99 APO
SPECIAL REPAIRS TO CPA OF ARMY AVN SQN AT MISSAMARI UNDER GE MISSAMARI.
2022_MES_558093_1
8313/E8
Open Tender
Civil Works
Item Rate
180 days
GE MISSAMARI
C a (i), b (i)
8 documents required · 8 mandatory
₹1,000
GE MISSAMARI
₹1.3 L
Yes
17 Dec 2022
17 Oct 2022
26 Nov 2022
17 Oct 2022
19 Nov 2022
5 Nov 2022
Amount
Taking down Chowkats or frames not exceeding 1.5 Sq. M each (Without taking off shutters from the frames) complete all as specified and directed.
Taking down Chowkats or frames exceeding 1.5 Sq. M but not exceeding 4 Sq. M each (Without taking off shutters from the frame) complete all as specified and directed.
S&F anodised aluminium frame for doors, windows, ventilaters with one or more rebates including joining cleat for fixing etc complete all as specified incl power coating above aluminium section.(minimum thickness of powder coating 50 micron) complete all as specified and directed.
S&F anodised aluminium door shutters aluminium section weighing 0.55 kg/m including necessary joining cleats glazing clips rubber neoprene packing anodised aluminium snap beading screws etc incl powder coating of any colour(thickness of power coating not less than 50 micron complete all as specified and directed.
S&F for anodised window shutters, side hung type without sash bars aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips,ruber neoprene packing,anodised aluminium snap beading screws,anodised aluminium fittings such as peg stays 150 mm long(1 no),hinges type-B-21 100 mm long( 2 no) suitable handle 1 no incl powder coating of any colour (thickness of powder coating not less than 50 micron) complete all as specified and directed.
S&F anodised aluminium grill ( anodised trasparent or dyed to required shade according to IS 1868 with minium anodic coating of grade AC15 of approved design/pattern with approved standared section and fixed to the exising windows frame with CP brass/ stainless steel screws @ 200 mm centre to centre all complete all as specified and directed.
S&F 4 mm thick Sheet glass, ordinary quality and glazing with wooden beads in squares not exceeding 0.5 Sq. M in each pane complete all as specified and directed.
S&F aluminium wire cloth with 0.45 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with aluminium stapple complete all as specified and directed.
S&F 100 mm long extruded aluminium alloy with galvanised mild steel Butt hinges and fixed type B-21 complete all as specified and directed.
S&F 150 mm long Extruded Aluminium alloy handles, fabricated type, anodised complete all as specified and directed.
S&F 150 mm long Aluminium, anodised, barrel tower bolts of extruded section complete all as specified and directed.
S&F 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy complete all as specified and directed.
Supply fix in repairs Harrison rails, mild steel, chromium plated fixed alongwith 2 Nos. of brackets, stops, rollers etc, complete all as specified and directed.
S&F in repairs PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and directed.
Supply & Fix in repairs vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) white with includig 'P' or 'S' traps complete all as specified and directed.
S & F in repairs Vitreous China Ware Wash hand basin white, flat back, size 550 x 400 mm size including cutting for and pinning ends of brackets or erecting stand.
PVC connection 15 mm bore 450 mm long
S&F in repairs brass cromium plated Tubular towel rail, 20mm dia, D type, 60cm long between flanges.
Dismantling floor, hearth or wall tiling incuilding cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the permises.
M&L Non - skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured including Screed bed or bedding layer of cement mortar 1:6, 15 mm thick for laying floor finishes.
Demolition of un- reinforced cement concrete in ground floors and pavings not exceeding 15 cm thickness. (Below or above ground level)
M& L for cement concrete work in pavement/ hard standing of flexural strength 40 kg/per squre centimeter in field using 400 kg of cement per cubic metre thickness of concrete 25cm or less.
M&L for racking out existing sealant from joints to a depth of at least 30 mm, cleaning the grooves joints, edges up to a depth of at least 15 mm by scrapping/ grinding by mechanical means to expose the concrete surfaces.
Supply and inserting 12 to 15 mm thick compressed nylon expansion joint board into the groove, over that inserting 12 to 15 mm dia closed cell baker rod maintaining uniform depth & supply and application by filling the joint with PU sealant- SIKA Hyfiex.
Crack Treatment: Inspecting the surface for any cracks. Cracks if any have to be sealed with epoxy repair mortar after clean or removal of cover concrete and making 'V' groove of 20mm wide and 10mm deep cover crck line along the length of the crack by elctrically operated angle grinder with diamond concrete saw blade and cleaning it by air blower as directed by Engineer-in-Charge.
Sealing of exposed 'V' groove of 20mm deep and 10mm wide with Sikadur 31 or equivalent solvent-free, moisture tolerant, thixotropic, structural adhesive and repair mortar, based on epoxy resins and special fillers, designed for use at temperatures between +10°C and +40 °C. Product should conforms to ASTM C 881-78, Type I, Grade 3, Class B+C : compressive strength > 60 N/mm2 (14 days) according to ASTM C881 : bond strength < 10 N/mm2 (7 days) according to ASTM C882 .
M&L for levelling the floor surface Grinding surface without any dust, oils, laurance, cement dead mortar thickness as required as per site requirment etc and application of three component epoxy mortar Sika 41 at Required places of the floor joints to get a required finish complete all as per manufactures instruction and as directed.
Surface Preparation: Surface Preparation by removing existing flooring with mechanical means, prepare the concrete substrate with proper scarifying & diamond grinding, Shot blasting, with Vaccum cleaning to remove dirt, dust, laitance, other contaminants etc., and to form the required anchor profile on the floor substrate between the floor topping and the concrete floor
Floor Leveling (3mm thick) Providing and applying 2 part water dispersed epoxy resin primer Sikafloor ®-80 Epocem Primer followed by applying temporary moisturer barrier technology based three part, self smoothing underlay screed Sikafloor 81 Epocem to a thickness of 2mm having carbon dioxide diffusion coefficient 1782 as per Klopfer Engel fried method, Water vapour diffusion co-efficient µH2O = 177 as per DIN 52615, Water absorption co-efficient W = 0.06 kg/m2as per SN EN 1062-3, Compressive strength 55 N/ Sqmm after 28days as per ASTM C 579, Flexural strength 10 N/ Sqmm after 28days as per EN 196, When applied at minimum 3 mm thickness it can be laid over high moisture content substrate when substrate moisture is more than 4%.
Installation of Epoxy topping 2mm using notch trowels and Spike rollers Providing and applying 2mm thick two part, solvent free, coloured,100% solids, self smoothing, smooth glossy, epoxy resin topping Sikafloor®-264 HC using notch trowels and spike rollers having compressive strength of 53 N/mm2 as per EN 196-1, Flexural strength of 20N/mm2 as per 196-1, Shore D Hardness 76 As per DIN 53 505, abrasion resistance 41mg ( CS10/ 1000/ 1000) as per DIN 53109. All in complete as per the manufacturers specifications and directions of the engineer in charge.
Taking down rain water pipes inculding all fittings any size and pattern
S & F 75 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints fixed to walls.
Supply & fix 32 mm dia., Waste fittings, brass chromium plated for glazed ware sinks, wash basins etc., with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed.
Taking up or down 15 mm bore steel tubing and connections, including cleaning for Refixing or removal to store
Taking up or down 20 mm bore steel tubing and connections, including cleaning for Refixing or removal to store
Taking up or down 25 or 32 mm bore steel tubing and connections, including cleaning for Refixing or removal to store
Supply and laying 20 mm dia CPVC pipes SDR 11 & plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.
Supply and laying 25 mm dia CPVC pipes SDR 11 & plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.
Supply and laying 32 mm dia CPVC pipes SDR 11 & plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.
S & F in repairs 15mm bore stop valves, cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions.
S & F in repairs 15 mm bore chromium plated bib taps, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule.
S & F in repairs 15 mm bore Fancy type pillar taps, Cast Copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe and fixed.
S & F cromimum plated helth faucet shower with CP flexible pipe up 15 mm bore (ABS Body) with 1 mtr long Easy Flex tube in chrome finish complete all as directed.Make-Jaquar-Code-ALD-CHR-585
Demolition of reinforced cement concrete in ground floors and paving not exc 15 cm thickness (below or aboce ground Level.)
M&L for precast RCC (1:2:4) type B1 using 20 mm graded stone aggregate as in cover slab and set in cement mortar (1:6) including necessary form work and mould complete all as specified and as directed.
M&L deformed or twisted TMT bars 10 mm dia and over cut to length, bent to shape required including cranking bending spirally for hoping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete.
Dismantling plain or corrugated steel sheeting any gauge, thickness
S&F pre painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws as specified.
S&F pre painted galvatume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws as specified.
S&F Sandwich PUF corrugated/plain panels of 50 mm over thick having PPGI sheeting of not less than 0.5mm thick fixed with self tapping screw on roofs/cladding for a height up to 10 mtr .
S & F Plain aluminium 0.71 thick sheeting alloy 31000 H4 in ridges, hips, valley gutter, drip and straight flashing.
Taking down/Dismantlinig wrought iron or mild steel work of any description not otherwise proveded for.
S&F Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates to Fe-290 (Gde E- 165) complete all as specified
S&F plates (plain or chequed) channels square or notched (ordinary & counter sunk) with riveted, bolted or welded attachment conforming to gde Fe-410-0 or Fe-310-0
S&F mild 12 mm steel screw bolts with hexagonal or square heads at one end and screwed the other and screwed end to be fitted with washers, one nut exc 45cm long and dia of neck exc 12mm & n.exc 20mm
S&F nylon HDPE bird proofing net of 2 cm pitch as directed by engr-in charge.Note9 Rate quoted by the contractor shall deemed to inclusive of necessary scaffolding and all other fittings and binding materials as required for fixing the net complete all as directed.
Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165
S & F in repair aluminium body door closer hydraucally regulated, designation No. 3 universal type , suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 kg
Preparation of new or previously treated steel surfaces of any description, over 10 cm width or girth, not otherwise described appling one coat of Red Oxide, zinc chorme and applying two coat of synthetic enamel paint.
Preparation of old painted steel surfaces of any description, over 10 cm width or girth, not otherwise described appling one coat of synthetic enamel paint.
Preparation of old painted steel surfaces of any description, over 10 cm width or girth, not otherwise described appling one coat of polynethene paint as directed and specified.
Demolition and breaking up including removing salt glazed stoneware pipe 150mm bore (internal) with concrete bedding and haunching complete including necessary earth work as required all as specified and directed.
Supplying, laying and testing of 150 mm internal dia of double wall corrugaed (DWC) high density polythylene pipe (HDPE) and stiffness classes 8 (SN-8) with ISI marked (With CML No ) with and including all fittings & jointing materials for connection of inspection chamber/WC to first manhole of the sewage line complete all as specified and directed..
Cutting into existing manholes of 150 mm dia for connecting new drains making good to pipe and rendering cutting out existing benching for and forming branch channel (1/2 round or 3/4 round section) in cement concrete 1:2:4 type B1, smooth finished and reforming benching as required.
Taking down the existing unserviceable main switch/ cut out/ DBs of any type/ capacity/ description as existing at site including making good the disturbed surfaces to match with the existing finishes all as specified.
Taking down carefully unsv aluminium submain wiring of any type /loc including conduit /casing and earth wire and making good the distributed surface of walls /ceiling matching with existing finishes all as directed by Engr-in-Charge.
Taking out unsv UG Cable any cross sectional area and connection of any description of any description laying in trenches or fixing with wall or poles all as specified and directed.
M&L for taking down unserviceable Highbay/Flood Light /Aviation light Fitting of any Watt/Make from existing hanger heights replacing unserviceable complete all as specified and as directed.
M & L in replacement of Submain wiring with 2 runs of single core 4 sqmm PVC insulated unsheated (FRLSH) multistranded 1100 volts grade with copper conductor drawn through and including non-metalic Rigid PVC Conduit ISI marked and its accessories including one run of single core 4.0 sqmm PVC insulated unsheated multistranded 1100 volts grade with copper conductor cable as earth continuty conductor along with the wiring and connected from DB to DB/main board complete all as specified and directed.
M & L in replacement of Submain wiring with 2 runs of single core 6 sqmm PVC insulated unsheated multistranded 1100 volts grade with copper conductor drawn through and including non-metalic rigid PVC conduit ISI marked and its accessories including Single run of single core 6 sqmm PVC insulated unsheated multistranded 1100 volts grade with copper conductor cable as earth continuty conductor along with the wiring and connected from DB to DB/main board complete all as specified and directed.
M & L in replacement of Submain wiring with 4 runs of single core 10 sqmm PVC insulated unsheated multistranded 1100 volts grade with copper conductor drawn through and including non-metalic rigid PVC concealled conduit ISI marked and its accessories including Single run of single core 10 sqmm PVC insulated unsheated multistranded 1100 volts grade with copper conductor cable as earth continuty conductor along with the wiring and connected from DB to DB/main board complete all as specified and directed.
S & F in replacement of sheet metal enclosure MCB DB TPN 8 way with 200 amps rated bus bar 415 volts double door with magnetic locking system complete including removal of old unsv sheet metal enclosure all as specified Model:-DBTPN008DD Make -L&T/Schneider/Indo asian/Legrand
S&Fin replacement of 63 A ,5 Pin (3 P+N+E) Metal Plug & Socket Enclosure for Three Phase connection all as specified and directed. Model:- DBMPS463SD, Make :-L&T or equivalent in Schinider and Legrand.
S & F in replacement of MCB TPN 415 volts suitable for fixing in MCB VTPN of capacity 63 amps complete all as specified and directed.Model:-AU15S41003D Make :-L&T or equivalent in Schinider and Legrand.
S & F in replacement of sheet metal enclosure MCB VTPN 12 way Double door Ready to use DBs - Provided with insulated vertical phase bus-bars |neutral bar/s with shroud/s | earth bar/s | sticking saddles | cement spill protector | color-coded interconnecting wire set | cable ties | blanking plates and circuit identification labels With provision for 4 Pole MCCB 160 A as incomer and SP/SPN MCBs as outgoing complete all as specified and directed.Model:- DBVTM012DD, Make L&T and equivalent in legrand and Indo Asian.
S & F in replacement of MCB SPN 230 volts suitable for fixing on MCB DB of capacity 32 TO 40Amps complete all as specified.
S & F in replacement of MCB SP 6 to 30 Amps 240 volts for fixing on MCB DB's all as specified.
S & F in replacement of MCCB 4 Pole 250 Amps, thermal magnetic type DN2-250D with breaking capacity 36 KA with thermal magnetic release at 415 volts, including spreader terminal, make: L&T Cat part No. CM92109OON1OG, complete all as specified.
S&F in replacement to Maintenance free chemical Earthing system complete with 03 Nos of Copper pipe of 80 mm dia with UL 467 approved copper bonded earth rods 17 mm dia 3000mm long electrode dipped fully in earth enhancing chemical compound buried in ground to bore holes 100 mm dia vertically to a depth not less 3.5 mtr deep below ground level with top edge of earth electrode at a depth not less than 500 mm below normal ground level, interconnected each other parallelely in Triangle Shape horizontally,With provision of copper busbar of size 32 mm x 6mm for inter connection with copper earth lead strip 32mm x 6mm for further connected to test point terminal block of size 120mm x 120mm x 25mm made of copper as directed including 45 x3 kg (Minimum) NABL Lab certified back fill earth enhancing compound for filling 3 x bore holes with soil mixed ,so as to achieve earth resistance below 1 Ohms including necessary excavation and earth work and Provn of PCC Chamber in PCC (1.3:6) type C1 (using 20 mm graded stone aggregate) with pit cover of 300 mm x 300 mm made of Cast Iron complete all as Specified.
S& F in replacement of earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit /pipe or fixed to poles or any other indicated situation for loop earthing etc as required with 20 x 3mm copper strip.
S & F in replacement of Test point terminal block made of gun metal or Phosphorus bronze size 75 x 75 x 25 mm, drilled and screwed including 3 Nos 8 mm dia 25 mm long hex head screw complete all as specified and as directed.
S&F GI Pipe of 40 mm Dia, ISI Marked , light grade to cover the copper strip (25 mm x 3mm) Complete all as Specified.
S & F Air Termination, single pointed copper rod 12 mm dia and 300 mm long complete fixed with brazing alll as specified and directed complete all as specified and as directed.
S&F Porcelaine insulator of suitable size for proper securing to roof conductor of aluminium strip including dismantling of unserviceable insulator complete alll as specified and directed.
M&L in replacement of earthing complete with galvanised steel earth plate electrode size 600x600x6.0mm thick buried directly in ground vertically in a pit of depth not less than 2.25 mtr below ground levels with top edge of the earth plate not less than 1.5 mtr below normal ground level surrounded from all sides by mixture of charcoal and common salt and electrode connected to and including galvanised earth lead wire 4.0 mm dia means of bolts, nuts, check nuts and washers of galvanised steel and GI pipe light grade 20mm dia bore for watering funnel with wire mesh refilling with vegetable soil without bolders and stones, gravels and aggregate etc,and CI cover with frame, PCC chamber pit with PCC 1:3:6 type C-2 excavation and earth work all as shown in electrical plate No 5 connected to earthing test point all as specified or indicated including testing on completion. NOTES : The unit rate includes for protection pipe and GI strip dia from top of earth plate up to 5.00 meter above ground level.
S & F in replacement of Energy saving new generation environmental friendly long life versatile presure die cast aluminium IP 66 Flood light fitting luminaire, with system efficiency ≥110 lumen/W,AC120-300 V with high power LEDs as light source and Secondary lenses 10KV SPD included with high efficiciency electronic driver of capacity 120 watts, with pre wired and necessary mounting arrangement and provision of 4.00 sq mm three core flexable copper conductor cable multi stranded ,connected to existing points in Hanger beam angle of any description complete all as directed by Engineer- in-charge.Make: Make:Crompton, Cat No LFLN-120-CDL/60-M, Model- PLUTO NEO, Make- CG or eqv in Havells/Crompton Greaves/Philips
S & F in replacement of Energy saving new generation environmental friendly long life with high luminious efficacy upto ≥ 150 LPW versatile presure die cast aluminium IP 66 protected Highbay light fitting luminaire with descrete high lumen LEDs as light source and electronic driver of capacity 150 watts with pre wired and necessary mounting arrangement and provision of 4.00 sq mm three core flexable copper conductor cable multi stranded ,connected to existing points in Hanger beam angle of any description complete all as directed by Engineer- in-charge.Cat No CIP-320-150-57-60D-HL4-GL-NSR, Model- SURROUND HYPERION, Make- CROMPTON or eqv in Havells/SURYA
S&F in replacement of LEDs aviation light energy saving new generation environmental friendly long life versatile presure die cast aluminium housing with polycarbonet enclosure with pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 and for fixing taking GI pipe pipe medium grade 40 mm dia 1.5 mtr long, complete all as specified and as directed. (Make :- BAJAJ, Cat Part No-110731 or equivalent in Havells/Phillips as approved by GE).
Supply & laying in replacement of LT UG XLPE sheathed PVC insulated, screened PVC bedded, Galvanised Steel Strip of Wire armoured Electric Power Cable heavy duty with stranded Aluminium Conductor 1100 Volt grade, cross-sectional area 120 Sqmm 3.5 Core, laid in trenches/surface of Wall/in GI Pipe along with Pole for connec-tion to OH Lines including Brass Cable Glands Mild Steel Flat Iron Clamps, etc. and Testing, complete all as specified and as directed. NOTE : Earthwork, Sand Cushioning, Bricks, GI Pipe, etc. will be measured and paid under appropriate Items.
Excavation in trenches not exc 1.5 mtr width and not exc 1.5 mtr in depth and getting out in soft / loose soil for laying /taking out of LT UG cable complete all as specified and directed.
Returning, filling in incl spreading, leveling , watering and well ramming in layers not exc 25 cm thick in soils complete all as specified and directed.
Removal of surplus soil to a distance not exc 50 mtr away and depositing where directed as a level not exc 1.5 mtr above the starting point complete all as specified and directed.
Supply and laying well burnt Bricks , locally available best quality (sub class "B" bricks) laid in trenches perpandicular to U/G cable for cable protection complete all as specified.
Supply , spread and filling approved sand in cable trenches for cushioning of LT UG cable complete all as specified and directed. NOTE :- Punned thickness only will be measured and paid.
Supply & lay GI tubing light grade in protection of cable /Al strip at road crossing /hard standing/pole protection fixed with clamps as per site requirement etc of size 50 mm dia bore complete all as specified and directed .
S&F in replacement of Galvanised iron Cable tray along with GI Clamp for fixing/grouting on wall or PCC wall suitable to carry load of XLPE cable of size 95-120 Sqmm complete all as specified and directed complete all as specified and directed.
Markson
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .