Comprehensive repair/replacement of street security light, Hight mast light, Lt cables, timer including solar LED light and allied works at Mallah pump house sewar fort and parade ground under GE Bharatpur

Amount

Excavation in trenches in soft/loose soil not exceeding 1.5m wide and not exceeding 1.5 metre in depth and getting out for laying of cable etc. complete all as specified and as directed by Engineer-in-Charge. Note :-Taking out old brick from trenches shall be measured separately and deduction for brick shall be made on this account.

Excavation in trenches exc 1.5 M wide but exc 1.5 M in depth for pipe line/pole, etc in soft / loose soil getting out and levelling of bottom surface to required level complete all as specified and directed.

Returning, filling in soft/loose soil including spreading, levelling, watering and well ramming, in layers not exc 25 cm complete all as specified and directed by Engineer-in-Charge.

Removing of surplus soil to a distance not exc. 50 metre and depositing where directed at a level not exc.1.5 metre above the starting point complete all as specified and as directed by Engineer-in-Charge.

M&L Protection to cable with one layer of bricks laid flat abutting to each other in such a way that the length of the bricks is at right angle to the central axis of the cable using old size sub-class ‘B’ burnt-clay bricks, complete all as specified and as directed by Engineer-in-Charge. (Note: the gap between two adjustable bricks should not be exceed 10 mm )

M&L Un washed dry tibba/local available sand as cushioning of under ground cable (8 cm thick layer of sand before laying of cable and 15 cm thick layer of sand after laying of cable) and punned after laying complete all as specified and as directed by Engineer-in-Charge. Note: Only punned thickness will be measured

M&L for cement concrete 1:4:8 type D2 (using 40 mm graded crushed stone aggregate) as in foudation,fillinf and mass concrete complete all as specified and directed

M&L for cement concrete (1:2:4) type B-1 using 20mm graded crushed stone aggregate for pedestal of poles/ coping including necessary formwork, fair finishing to exposed surfaces using extra cement complete all as specified and directed.

S & F in replacement street light GI bracket of 1.2 mtr long made out of 40mm dia light grade GI pipe bend to shape of 120 degree end welded at required including 02 Nos MS clamp of flat iron 40 x 6mm with nuts bolts & washers for fixing on wall complete necessary fixing arrangements on pole complete all as specified and directed

S & F in replacement PVC insulated and PVC sheathed cable with multi standed aluminium solid conductor of size 4 SqmmX2 core from over head ACSR conductor/junction box to street light fitting complete all as specified and directed by Engineer-in-charge.

Boring of holes under road, pavement, hard standing by trenchless technology using suitable tools and machinery for laying of pipe upto 150mm bore complete all as specified and as directed . Note :- GI pipe shall be measured and paid in concern Item

S & F or laying galvanised steel tubing medium grade (ISI marked) for protection of under ground cable on poles/walls under road crossing of size 40mm bore complete all as specified and as directed by Engineer-in-Charge.

Taking out old un-servicable/ faulty PVC armoured LT under ground cable of any size any core complete all as specified and as directed by Engineer-in-Charge.

S&F or laying cross linked poly-ethylene (XLPE) insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables ( heavy duty) with aluminium conductor, 1100 volts grade of cross-sectional area 25 Sqmm X 4 core laid in trenches/through pipe in road crossings/ paths /drains /ducts /floors /along poles/walls/ceilings/ equipments etc including commissioning and testing complete all as specified and as directed by Engineer-in-Charge. Note: :- (i) Necessary excavation and earth work, brick protection, sand cushioning and cover and GI pipe shall be measured and paid for separately.)

All as per item No 14.00 above but size 16 sqmm X 4 core

All as per item No 14.00 above but size 10 sqmm X 4 core

All as per item No 14.00 above but size 10 sqmm X 2 core

Taking down non functional/ unserviceable /energy inefficient street /security light fittings of capacity upto 200W existing and re-fixing after minor repair including minor parts ie wire, etc to existing / directed location complete all as specified and directed by Engineer-in-Charge. Note: Items/fittings required for replacement shall be measured and paid seperately as supply only under respective items of BOQ

Supply only LED surge protector 10 KV multiple type 2 surge arrestors with thermal monitaring device and connector, dual visual fault indicator for the discharge path of the supply voltage and control the phase complete all as specified and directed.

Supply only LED drivers rated voltage 12/24 volt maximum out put power 90 W typical efficincy 93% complete all as specified and directed.

Supply only LED drivers rated voltage 12/24 volt max out put power 150 W typical efficincy 93% complete all as specified and directed. .

Dismantling and taking down of non functional/ unserviceable street /security light fittings of any type (HPSV/bulk head light/CFL etc)of capacity upto 400W existing complete all as specified and directed by Engineer-in-Charge.

Supplying, errecting and fixing steel tubular swaged poles with MS iron base plate of size 300mm x 300mm x 6mm, finial taper plug, bolts, nuts & screws for type 410 SP-64 (12.0 metres long) including painting with two coats of aluminium paint over one coat of redoxide primer on all exposed surfaces and tarring with black bituminous paints to embedded portion in PCC and providing 3 Nos of 30cm wide circular bands with black & yellow paint starting from plinth level at a gap of 30 cm in between 2 bands and numbering of poles, in yellow paint over black painted back ground at a height of 2m from bottom of pole with 5 cm large bold letters 2" (inch) wide complete all as specified and directed. Note: Excavation, earth work, PCC in foundation and coping shall be measured and paid separately under relevant item of this schedule.

Supplying, errecting and fixing steel tubular swaged poles with cast iron base plate of size 300mm x 300mm x 6mm, finial taper plug, bolts, nuts & screws for type 410 SP-31 (9.0 metres long) including painting with two coats of aluminium paint over one coat of redoxide primer on all exposed surfaces and tarring with black bituminous paints to embedded portion in PCC and providing 3 Nos of 30cm wide circular bands with black & yellow paint starting from plinth level at a gap of 30 cm in between 2 bands and numbering of poles, in yellow paint over black painted back ground at a height of 2m from bottom of pole with 5 cm large bold letters 2" (inch) wide complete all as specified and directed. Note: Excavation, earth work, PCC in foundation and coping shall be measured and paid separately under relevant item of this schedule.

Supply, install, testing and commissioning in replacement factory made THERMOPLASTIC/HDPE CABLE JUNCTION BOXES IP 66/67 “weather proof”, with terminals for outdoor installation (with knockouts for cable entry) of size 205 x 255 x 112 mm depth with cable entry size of 10-25 sqmm with terminal incl Aluminium bus bar of 63 amp-04 Nos and MCB SP 6 amp-01 No of make sintex/fibox/hensal/universal complete all as specified and directed.

Supply & fix in replacement 60 watts LED street light fitings new generation energy saving ,environmental friendly ,long life,versatile pressure die cast aluminium with following specification IP66 with 10KV surge protection , PF>0.95, THD < 10%, input voltage 220-240V AC, operating voltage (VAC) 100V -300 V, Lum Flux (+-) 10% , CRI -80 Lum efficienacy (+-) 10% CCT -5700K road way,luminaire with high power LED as light source with warranty option of 5 years and suitable drivers etc and connecting with 2 x 1 sq mm multistranded PVC insulated copper conductor with PVC Conduit 20mm dia from fittings to the jucntion box and fixing to complete all as specified and directed , Make: Cromption/Havells/Bajaj or equivalen

All as per item No 27.00 above but 90 watt LED fittings complete all as specified and directed.

All as per item No 27.00 above but LED flood light fittings 150 watts 230 volt complete and all assy duly prewired and pressure die cast aluminium housing, heat resistant tough glass with frame,IP 66 protection and better optic for uniform distribution complete all as specified and directed. Make:- Crompton / Philips/Bajaj/Havells

S&F in replacement MCCB 04 pole 100 Amp, Thermal maganatic, adjustable type, breaking capacity not less than 25KA,415 volts complete all as specified and as directed by Engineer-in-Charge.

S&F in replacement MCCB 04 pole 160 Amp, Thermal maganatic, adjustable type,breaking capacity not less than 25KA,415 volts complete all as specified and as directed by Engineer-in-Charge.

M & L for earthing complete with Galvanised steel earth plate electrode 600 x 600 x 6 mm buried directly in the ground vertically to depth not less than 3 Mtr below the ground level with the top edge of earth plate, depth not less than 2.25 Mtr below the ground level connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts and washers protected by GI tubing light grade 40 mm dia uptoTest point 20 mm dia watering pipe with funel & wire mesh, PCC pit in PCC 1:2:4 using 20 mm stone aggregates chamber 40 mm thick RCC cover slab (1:2:4) type B-1 using 20 mm graded stone aggregates complete all as specified and shown in electrical plate No.3 of SSR Part-I including earth work in any type of soil ,removal of surplus sil and providing charcol dust & salt layers all around the earth plate upto 15 cm complete all as specified & directed by Engr in charge. Note:- Up to 7.5 Mtr length of pipe of 40 mm dia and GI strip shall be deemed to be included in unit rate quoted by tenderer GI pipe and GI strip beyond 7.5) will be measured separately under respective item.

Supply and fixing in replacement of Lithium base Energy efficient integrated Solar street light of 36 watt in single FRP body duly polyurethane coating (Camouflage color), encases with monocrystalline solar PV panel of 65-67Wp,lithium battery 11.1/12.8V,33.0 AH with inbuilt BMS,IP 65, High brightness W-LED(160-180lm/watt) lamp with Aluminium reflector for better light distribution ,CRI>70, color temp 5700K-6500K Microcontroller based charge controller cum driver,automaticdimming function(First 04 hrs at full brightness & rest of the time at lower light level with PIR motion sensor), Dusk to dawn operation,suitable to working temp (-) 10C to (+) 55C ,weight not more thatn 16-18 Kg with adjustable MS clamp suitable for pole/wall mounting etc complete all as specified and directed Make: AXXON/HAVELLS/PHILLIPS/CG Protections: Short circuit, overload,Reserve polarity and battery protection.Firm should provide vital parametres Test report from NABL accredited lab and should be of made in India with CE & ROHS complaint.

M&L for painting on steel pole initially scraping deteorated paint by emery paper and complete removal of rusted suface, painted with one coat of red oxide zinc chrome primer on exposed prepared surface and providing 03 Nos of 30 cm wide circular bands with black and yellow paint starting from bottom level at a gap of 30 cm in between 2 bands and numbering of pole with yellow paint over black painted background at the height og 02 meter from the bottom of pole with 02 cm larger Bold letter of height 2 inch wide complete all as specified and dirceted .

M/s Ranaji Construction Co

PD GUPTA AND COMPANY

Vijay Electricals

krishna Associate

GLOBAL ENGINEERS AND INNOVATORS