REPAIR TO FLOORING SUNKEN FLOORS,SANITARY FITTINGS OF TOILET ,BATHROOM AND REPAIR TO JOINERY IN CERTAIN BLDGS IN ZONE A AREA AT VSN NAGPUR

Amount

Taking down of chowkat with shutter without taking off shutters from the frame exceeding 1.5sqm each but not exceeding 4 sqm all as specified and as directed.

Taking down of shutters of any description not exceeding 1 sqm each all as specified and as directed.

Taking down of chowkat with shutter without taking off shutters from the frame, not exceeding 1.5sqm each all as specified and as directed.

Taking down of shutters of any description exceeding 1 sqm each and not exceeding 2 sqm each all as specified and as directed.

S&F IInd class HW plain solid, straight, chowkats and frame, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints all as specified and as directed.

S&F mild steel flat iron hold fast including bolts conforming to Fe 410-0 of Fe 310-0 all as specified and as directed.

M&L for providing plain cement concrete 1:3:6 type C1 using 20mm graded aggregates for fixing hold fast and making good to disturbed surfaces all as specified and as directed.

S&F 30mm thick flush door shutter solid core construction with block board case and plywood face panels, commercial type on both sides make as approved by GE.

S & F 2nd class hardwood glazed and skeleton shutters 35 mm thick open rebated and prepared to receive glass, gauge etc with sash bar divided into Sqms edges of framing plain chamfered or rounded, fitted with cut and mitred beads for securing glass or gauze etc all as specified and as directed.

All as per item No. 9 above, but 30 mm thick complete all as specified and directed.

S&F ply wood grade BWR type BB 18/19mm thick (9PLY) ISI marked fixed with screw to timber frame work fixed in repair all as specified and as directed.

S & F Factory made solid panel door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel heaving a PVC sheet strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing all as specified and as directed.

S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with mild steel Squartube with single side prelaminated PVC sheet used instead of plain colour PVC sheet & edges will be painted to match with prelaminated sheet & fixed in position as per manufacturer's instruction all as specified, as shown on drawing on page No 178 of SSR Part-II 2020 all as specified and as directed.

S&F factory made solid panel PVC door wire gauzed shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of stainless steel wire cloth i.e. panel will be of wire gauze in lieu of PVC sheet panel. The wire gauze shall be wrapped on an additional square 8mm M.S. Solid tube and this tube shall be welded to M.S. tubes. The wire gauge shall be stretched to tighten firmly all as specified and as directed.

S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples all as specified and as directed.

Hacking out old broken glasses any thickness, size, quality or description from wooden frames glazed with putty or fixed with bead all as specified and as directed.

All as per item No 16 above but from metal frame including punching out or drilling out old glazing pins/spring clips and providing and fixing new all as specified and as directed.

S&F sheet glass ordinary quality 3mm thick with oil putty not exceeding 0.5 sqm in each pane all as specified and as directed.

All as per item No 19 above but pin head type

S&F Block board, grade 1 quality, exterior grade, commercial type with one side decorative face 18/19mm thick all as specified and as directed.

M&L for 12mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified.

M&L for 18/19 mm thick prelaminated particle bard, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and as directed.

S&F butt hinge, medium weight ,cold rolled mild steel 100mm long complete all as specified and as directed.

S&F butt hinges, medium weight ,cold rolled mild steel 75mm long all as specified and as directed.

S&F aluminium anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolt and sliding bolts of extruded sections or cast aluminium alloy 300 mm long and fixed all as specified and as directed.

S&F floor door stopper of aluminium alloy body double and tongue anodised with rubber shoe and fixed of size 150 mm all as specified and as directed.

S&F aluminium anodised barrel tower bolt of extruded section 200 mm long and fixed all as specified and as directed.

All as per item No 28 above but 150mm long complete all as specified and as directed.

S&F extruded aluminium alloy handle fabricated type anodised 150 mm long complete all as specified and as directed.

All as per item No 30 but 100mm long complete all as specified and as directed.

S&F hasp and staple, safety type aluminium anodised with hinge pin including bolt to hinge plate and fixed with screw 125 mm long all as specified and as directed.

M&L for preparing new surfaces of wood of any description over 10cm width or girth and apply two coats of synthetic enamel paint over a coat of pink primer all as specified and as directed.

All as per item No 33 above but on steel surfaces over red oxide primer complete all as specified and as directed.

S&F 100 mm long stainless steel butt hinges complete all as specified and as directed.

S&F 300 mm long, mild steel ordinary rat rail springs including roller and roller plate complete and taking down old one all as specified and as directed.

M&L for welding in repairs to broken hinges of doors and windows to metal frame all as specified and as directed.

S&F in repairs mild steel handle to existing steel windows left or right (as per existing pattern) all as specified and as directed.

M&L for welding in repairs n exc 2.5cm in length n exc 6mm thick complete all as specified and as directed.

S&F Aluminium framed window, any pattern fixed /side hung/sliding (two or Three track) using powder coated aluminium sections of approved make with or without sash bar suitable for 4mm thik glazing, including necessary joining cleats , glazing clips, aluminium snap beading handles, locking arrangement etc. complete including taking down all as specified and as directed. Note:- (1) For purpose of payment wight of aluminium section shall only be considered. (2) Glazing shall be measured and paid separately

Supply only 6mm thick, (consisting of 5 Nos of Ply), plywood BWR, type BB complete all as specified and as directed.

Supply only 12mm thick, (consisting of 5 Nos of Ply), plywood BWR, type BB complete all as specified and as directed.

S & F Block board 18/ 19 mm thick, grade 1 quality, exterior grade, commercial type, decorative type on both faces complete all as specified and as directed.

S&F aluminium louvered type ventilator with frosted glass and all fittings, closing and opening type all as specified and directed.

S&F mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed.

Dismantling of wrought iron or mild steel work of any description not otherwise provided for all as specified and directed.

S & F of Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St.-240 complete all as specified and as directed.

Dismantling asbestos cement, galvalume, fiber sheet (Plain, corrugated, semicorrugated, etc.) sheet in roof covering all as specified and directed.

Dismantling of wall and celling board (fiber, pulp, insulation, etc) or insulation board / slabs/ blankets, any thickness, including cover fillets all as specified and directed.

S&F Pre painted GalvaIume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws etc complete all as specified and directed.

S&F Pre painted GalvaIume aluminium zinc coating GI based Plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in ridge of roof covering fixed with self tapping screws etc complete all as specified and directed.

S & F 2mm thick fibre glass reinforced translucent corrugated sheet with two corrugation sheet with two corrugation side laps fixed with L-type or J-type or cranked hook bolts all as specified and as directed, including taking down old sheet complete all as specified and as directed.

S&F Door closer hydraulically regulated, designation No 3, aluminium (die cast ) body, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 Kg and fixed including taking down old one all as specified and directed.

S&F Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover governing pivot made of brass, other parts made of mild steel heavy duty including taking down old floof spring hydraulically complete all as specified and as directed.

S & F of Poly carbonate sheet including aluminium profile with rubber beading and profile screws complete all as specified and as directed.

S & F 5mm PVC rubber sheet for doors complete all as specified and as directed

S&F in repair to 9 feet pully operated cloth drying system aluminium anodised 20mm dia pipes,channels assembly ,locking system to hide rope knot, rope 4 mm dia HDPE double core and fitting materials etc. complete all as specified and directed. Make:- Easy dry or other equivalent make as approved by GE.

Supply and fix SS 202 steel grade 5mm wire Thali basket (17x20x8) inch complete all as specified & directed . Make: luxury style or equivalent

Supply and fix SS 202 steel grade 5mm wire Cup- saucer basket(17x20x4) inch complete all as specified & directed .Make: luxury style or equivalent

Supply and fix SS 202 steel grade Plain utility (17x20x4) inch complete all as specified & directed . Make: luxury style or equivalent

Supply and fix SS 202 steel grade 5mm wire plain utility(17x20x8) inch complete all as specified & directed . Make: luxury style or equivalent

Supply and fix SS 202 steel grade 5mm wire cutlary basket(17x20x4) inch complete all as specified & directed . Make: luxury style or equivalent.

Supply and fix SS 202 steel grade 5mm thick wire Dustbin holder (9x12) inch complete all as specified & directed . Make: luxury style or equivalent

Supply and fix Teliscopic channels 500mm regular complete all as specified & directed . Make: luxury style or equivalent

Supply and fix Nickel and cromium plated auto close hinges regular complete all as directed .

Supply and fix shutter in 18 mm waterproof marin ply with both lamanation one side white and other side of specified colour as directed with edge binding complete all as specified & directed.

Supply and fix 600mm carecase made with MDF and doors with Marino ply with both side lamination one side white and other side of specified colour as directed with edge binding complete all as specified & directed.

Supply and fix Aluminium 'G' section handles complete all as specified & directed. Make -Luxury or equivalent

Supply and fix 20 G steel hollow section welded frame with powder coated (white colour) of various section for base frame complete all as specified & directed.

Supply and fix asbestos Cement sheet 12mm thick for loose (panel) complete all as specified & directed.

Material and labour for Granite of 20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite and mouldidng/rounding the edge complete all as specified and directed.

Dismantiling of existing kitchen (Including cooking platform, pedestals & boarding with frame complete all as specified and directed.

Supply and fix ply 18mm thick lamination (white colour ) both side Innotek drawer (Heavy drawer capicity 35 Kg) complete all as specified & directed.

S&F sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, with waste pipe complete with overall size 485mm x 420mm bowl size 410mm x 3330mm x 160mm and as directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) including floor finishes all as specified and as directed

Demolition of cement concrete in ground floors and pavings n exc 15 cm thickness (other than ground floor) including floor finishes and disposal of debirs all as specied and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding and disposal of rubbish off the premises all as specified and as directed

Taking down cement plaster, any description, on brick or stone walls etc, including raking out joints, hacking for key, scrubbing down with water etc all as specified and as directed

M & L for P.C.C. (1:2:4) type B-0 using 12.5 mm size graded stone aggregate with using WPC as in sunken portion all as specified and as directed.

M & L for Water proofing treatment of sunken portion of toilet,cement mix with mastercrete M-81 of choksey chemicals (or equivalent product of other company ) in the ratio of 2:1 two parts of cements and one part of mastercrete M-81 and applied in two coats @0.75 kg/sqm per coat all specified and directed by Engr -in-charge

M & L for P.C.C. 1:5:10 type E2 using 40 mm size graded brick stone aggregate as in sunken portion all as specified and as directed.

M&L providing PCC 1:2:4, type B1 (using 20 mm graded aggregate), 40 mm thick,finishing cement concrete surfaces fair and even all as specified and as directed.

M&L providing PCC 1:2:4,B-0, 1:2:4(12.5mm graded aggregate), 25 mm thick, finishing cement concrete surfaces fair and even all as specified and as directed.

M & L providing screed bed or bedding layer of mortar 15 mm thick for laying floor finishes in CM 1:6 all as specified and as directed.

M&Lfor 10 mm thick in CM 1:3 screed bed or bedding layer of mortar for laying wall tiles or vertical surfaces (skirting/ dado etc) complete all as specified and as directed.

S/F vitrified ceramic tiles 10mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match all as specified and directed.

M&L for coloured/designer glazed ceramic tiles 300 x 450 x 7 to 8 mm , finish laid on vertical surfaces such as skirting, dado etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match, all as specified and as directed.

M&L for coloured non-skid ceramic tiles 300 x 300 x 7 mm, finish laid in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match all as specified and as directed.

Taking down cement plaster, any description, on brick or stone walls etc, including raking out joints, hacking for key, scrubbing down with water etc all as specified and as directed

M &L for rendering 15 mm thick in CM 1:4 over brick or concrete surfaces, finished fair and even using water proofing compound @ 3% by weight of cement (WPC shall be measured and pair separately) all as specified and as directed.

M&L for preparation of newly plastered wall surfaces and applying two coats of Oil bound distemper over a coat of approved putty all as specified and as directed.

M & L for rendering 10 mm thick in CM 1:4 over brick or concrete surfaces on ceilling surfaces, finished even and smooth without using extra cement all as specified and as directed.

M&L for preparation of newly plastered wall surfaces and applying three coats of white wash on ceilling all as specified and as directed.

Supply only approved integral water proofing compoound.

Taking up or down steel tubing and connections 15 mm bore all as specified and as directed.

All as per item No 95 here-in-before but 20 mm bore

S&F 15 mm bore steel water tubing, medium grade, galvanised, with all fittings and fixed complete to walls and ceilings or laid in floors all as specified and as directed.

All as per item No 97 here-in-before but 20 mm bore

Fixing only steel water tubes obtained from dismantling including cleaning for re-fixing, any grade, 15 mm bore, to walls and ceilings or laying in floors all as specified and as directed.

All as per item No 99 here-in-before but 20 mm bore

S&F in repair Bib tap 15mm bore fancy type, foam flow chromium plated with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule and fixed including taking down old one all as specified and as directed. Make : Prayag or equivalent

S&F fancy Angle cock 15mm bore fancy type chromium (concealed type) including taking down old one all as specified and as directed. Make : Prayag or equivalent

S&F in repair Stop cock 15mm bore fancy type chromium (concealed type) including taking down old one all as specified and as directed. Make : Prayag or equivalent

Supply and fix brass chromium wall mixture model 3 in 1 wall regular half turn complete including taking down old oneall as specified and as directed. Make : Prayag or equivalent

Supply and fix brass chromium wall mixture model 2 in 1 wall regular half turn complete including taking down old oneall as specified and as directed. Make : Prayag or equivalent

Supply and fix brass chromium central hole basin mixer without popup waste system with 450mm long braided hoses complete including taking down old oneall as specified and as directed. Make : Prayag or equivalent

S&F in repair Pillar tap brass CP fency type, foam flow, 15mm with capston heads , screwed down high pressure for wash hand basin all as specified and as directed. Make : Jaquar

S&F in repair 2 way swan neck Pillar tap brass CP fency type, foam flow, 15mm with capston heads , screwed down high pressure for wash hand basin all as specified and as directed. Make : Jaquar

S/F in repairs PVC mirror cabinet of size 350 x 450 mm, Make PRAYAG or equivalent in other makes all as specified and as directed.

S&F Glazed Corner shelf with brass CP railling of Make Paryware or equivalent in Jaquar/Jhonson/Parryware/Prayag all as specified and as directed. Make : Jaquar

S&F Glass Self 22" with Brass Chromium plated railling of Make Jaquar or equivalent in Make Jhonson / Parryware/Prayag all as specified and as directed

S&F PVC (SWR) pipes single socketed, 110 mm dia in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed.

S&F PVC (SWR) pipes single socketed, 75mm dia in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed.

S&F PVC (SWR) bends any radius 75mm bore complete all as specified and as directed.

S&F PVC (SWR) bends any radius 110mm bore complete all as specified and as directed.

S&F PVC (SWR) multi floor trap 75mm dia with grating including jointing with solvent cement complete all as specified and as directed.

S&F PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and as directed.

S&F in repair 10 litres capacity PVC valveless, syphonic action type, slim body fancy flushing cistern, low level, white, with inlet valve, float valve and handle including removal of old one all as specified and as directed.

S&F in repair vitreous china squatting orissa of pattern, long pan, size 580 X 440 mm with 'P' or 'S' trap, front or back inlet and foot rests, any pattern making good to floor all as specified and as directed.

S&F in repair vitreous china wash down water closet, pedastal pattern (EWC) white with 'P' or 'S' trap, fixing bolts and PVC water closet seat and cover, black or white, closed pattern with flat bottom and mild steel chromium plated or aluminised hinging device complete making good to floor all as specified and as directed.

S&F in repair PVC water closet seat and cover, black or white, closed pattern with flat bottom and mild steel chromium plated or aluminised hinging device including taking down old one all as specified and as directed.

S&F in repair flush pipe of polythelene of low or high density or PVC, 32 mm dia, for low level cistern all as specified and as directed.

S&F PVC connection 25 mm size with PTMT nuts of length 450 mm including taking down old one all as specified and as directed.

S&F 100 mm cast iron sanitary connections, short connections pipe of length 300 mm including taking down old one all as specified and as directed.

S&F 100 mm cast iron sanitary connection socket to fit WC out let including taking down old one all as specified and as directed.

S&F 100 mm bore cast iron (sand cast) soil, waste and vent pipes, in any length with or without ears, with cement joints, fixed to wall including taking down old one all as specified and as directed.

All as per item No 126 here -in before but 75 mm bore complete all as specified and as directed.

S&F 100 mm bore CI branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches, including taking down old one all as specified and as directed.

S&F 100 mm bore CI bend, diminishing pieces or tapers including taking down old one all as specified and as directed.

S&F 75 mm bore CI bend, diminishing pieces or tapers including taking down old one all as specified and as directed.

S&F 100 mm bore cast iron soil, waste and vent pipes, in any length with or wothout ears, with cement joints, laid in trenches ;or in floors including taking down old one all as specified and as directed.

All as per item No 131 here -in before but 75 mm bore complete all as specified and as directed.

S&F Brass chromium plated shower rose 125 mm size all as specified and as directed.

S&F Toilet paper holder Brass Chromium plated fixed to wall with chromium plated brass screw including taking down old one all as specified and as directed.

S&F in repair Brass chromium plated Towel Rail D Type 60 cm long between flanges all as specified and as directed.

M&L for making good wall or floor tiling to match existing in locations of repair to pipe lines and fittings including supply of tiles jointing and pointing complete (area not exceeding 0.1 sqm) all as specified and as directed.

M&L for 100 mm dia cast iron floor trap with grating including jointing to waste pipe fixed in cement concrete type B1, (1:2:4) including taking down old one all as specified and as directed.

All as per item No 137 here-in-before but 75 mm dia Nahani trap complete all as specified and as directed.

S&F in repair Vitreous China wash basin, white, flat back of size 550 x 400 mm including CI brackets, waste coupling, waste pipe of 32 mm dia low density polythelens (LDPE) pipes of pressure rating 4 Kgf/Sq cm, brass CP pillar tap 15mm screwed down high pressure, PTMT bottle trap, pvc supply pipe 15mm from stop valve etc complete all as specified & as directed

S&F PVC, 32 mm dia,polythelene of low density of pressure raing 4 kgf/cm2 fixed completely to wall/floor for wash hand basin including taking down old one all as specified and as directed

S/F Hand shower 100mm round shape Make Jhonson, jaquar or equivalent incluiding taking down old one complete all as specified and as directed.

S&F Overhead shower 5 Flow-Bell Shape HL 900 with 0.60 m arm of Make Jhonson ,jaquar , prayag or equivalent including taking down old one complete all as specified and as directed.

S&F brass chromium plate jet speary with 1.5 meter long easy flex tube in chrome finish and wall hook with NRV (back flow preventer ) make jaquar or equivalent as directed

S&F brass chromium plated hand shower (Health foucet) with 1 meter long easy flex tube in chrome finish and wall hook with NRV (back flow preventer ) of make jaquar/ Prayag or equivalent as in specified makes.

Supply and fix 15mm dia 2 way Bib cock cast copper alloy with crutch or butterfly handles screwed down screwed for iron pipe fixed in repair all as specified & directed Make: Jaquar /Prayag or equivalent in specified makes.

S & F ornamental type powder coated mild steel curtain rods of dia 25mm and thickness of 1mm including brackets etc complete all as specified and as directed.

Dismantling of stone slabs in roofs suspended floors,chajjas, landings etc any thickness ,jointed in any mortar complete all as specified and as directed.

M&L for 20mm thick granite (of any type ) work (table rubbed and polished ) in steps, jambs, pillars, window -cills, cooking platforms and like in cement (1:4) including pointing in wihte cement (1:2) using marble dust with admixture of pigment ot match with shade of granite complete all as specified and as directed.

M&L for machine cut cudappah stone slab 20-25mm thick over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.

M&L for rounding to edges of stone slabs on edge, such as in steps, cooking platform and other similar situations complete all as specified and as directed.

Demolition or brick work or stone/boulder masonry built in cement mortar or cement lime mortar including all quoins,arches,pillars, etc but excluding ashlar facings,dressed stonework and precast concrete articles in cement mortor in 1:4 complete all as specified and as directed.

M/L Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM 1:4 complete all as specified and as directed.

M&L brickwork with flyash bricks, straight or curved on plan to any radius in half brick thick walls, built in CM 1:4 complete all as specified and as directed.

S&F bib tap 15mm dia standard of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms/20mm- 125gms) complete all as specified and as directed.

Material and labour for grouting in roof through PVC nipples at a spacing of 45 to 60cm C/C including drilling injection points to a depth of 75-100mm, providing 10mm dia PVC nipples and pressure grouting using with and including cement mixed with plasticizing admixture like FOSROC (model CEBEX100) or PIDILITE (model 207 PIDICRET 8AM) @ 225gms/50kg of cement to fill up all capillaries/ voids/ honeycombing areas inside concrete with pressure of 2 to 4 Kg/Sqcm and continued till refusal. After grouting, nozzles to be sealed with the sealing compound/mortar etc, all as per manufacturers instructions and as directed. Note:- After ascertaining the location of leakage/ seepage/dampness, this item shall be operated at the required location.

S&F Grating doom 100mm dia of PTMT (Minium weight 25gms) complete all as specified and as directed.

S&F paper holder of fixed to walls with chromium plated (CP) brassscrews Code : AHS-1553 paper holder complete all as specified and as directed. Made -Jaquar or equivalent

S&F Towel rack of stainless steel including screws and wooden /plastic cleats complete all as specified and as directed of make jaquar Code: AHS 1581H towel Rack with lower hanger or equivalent

S&F stain less steel soap dish including fixed to plugs with chromium plated brass screws complete all as specified and as directed of make jaquar Code :AQN-7731 or equivalent

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and as directed.

M&L for Cement concrete in of type D2 (1:4:8) 40 MM graded aggregate in foundations, filling and mass concrete complete all as specified and as directed.

M&L for factory made Machine pressed rubble moulded precast conctete interlocking paver block any shape and size with grey cement and pigments confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with 50 mm thick stone dust cousioning all as specified and directed

Excavating in post holes (or similar holes) each in loose/soft n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50 m and making good surface complete all as specified and as directed.

Removing excavated material n exc 50 m and depositng where directed at a level n exc 1.5 m above the starting points all as specified and directed

Returning,filling in including spreading levelling,watering and well ramming in layers n.exc 25 cm thick in layers etc all as completed and as directed.

M&L hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and as directed.

M & L for 100mm thick plain Cement concrete 1:2:4,type B-1, using (20mm graded stone aggregate), complete all as specified and as directed.

M&L for 100 mm thick PCC in 1:4:8 type D2 using (40 mm graded stone aggregate) as in floors, path & hard standing etc all as specified and as directed.

Fixing only Chain link fencing including line wires any mesh size and type to any type of standards, rails straining bolts etc including provision of binding wire all as specified and as directed.

Supply only Chain link MS galvanised fencing, any size or type all as specified and as directed.

S&F mild steel Framed works such as in fencing posts/ struts in fencing including cutting top to shape as directed, drilling holes, notching for wire etc. flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc. and similar work confirming Fe 410-0 or Fe-310-0 all as specified and as directed.

S&F mild steel framed work such as in doors or gates using angle or other sections with gusset plates, rails, braces etc complete, drilled for and including steel sheeting or covering as required. Doors etc to be prepared for hanging or sliding with and including hooks and hinges of steel for hanging door and other fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and as directed.

M &L for Chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors complete all as specified and as directed.

dhanshree enterprises

Rajveer Infrastucture

Asha Enterprises

M/s Earth Technology and Construction

M/s ABHIMAN HEGDE

Meet Road Lines

M/s Ashwin Bhange