PETTY REPAIR TO INTERNAL ELECTRIFICATION AND ALLIED SERVICES OF OFFRS, JCOs AND OR MD ACCN BLDGS UNDER GE WEST MATHURA

Amount

Attending day to day /door to door petty nature of E/M complaints with essential services recorded/ lodged by the users by electronic media/ ARMAN or in complaint register or received telephonically in respect to repair/rectification of fault in electric light fittings/fixtures, MCB DB's, MCB's/MCCB's of any amps, internal wiring in LT Panel, socket point 5A/15A, fan point, fixture and rectify the faults and replacement of unsv any type of fitting/fixture, bakelite sheet, hanging/taking down of ceiling fans including minor repair, restore the electric supply and making the points/accessories serviceable with replacement of any minor parts like small length of wires and other connected minor accessories including cutting of existing bakelite sheet to accommodate new wiring accessories and to check and removal of any current leakage in service connection /submains of house, repair to building security lights etc in area complete all as specified and directed.

Note:- (a) The persons deployed should posses good knowledge in internal electrification having 3 years (b) Complaints of urgent nature/current leakage which affects internal electrical system to a particular area will be attended within 02 hours. (c) Complaints of normal nature will be attended within 24 hours of complaint lodged. (d) Nature of complaints either urgent of normal shall be decided by in the Engr-in-Charge. (e) If the contractor fails to attend the complaints of normal nature within 24 hrs and urgent nature within 2 hrs, he shall be lavied panelty Rs 500/- per complaint per day. Cont/-

Cont/- (f) Contractor has to be deputed min 03 electrician and 03 helper and should be made available from 0900 hours to 1700 hours. The cost of this effect is deemed to be included in quoted rate. (g) If any item required to be replaced shall be measured and paid separately as supply only items of this schedule. (h) The persons deployed for attending complaint shall give his permanent mobile number, copy of Aadhar card to Engr-in-Charge and Antecedent should be required for Police verification before deployment. The cost of this effect is deemed to be included in quoted rate.

Supply only surface/ wall mounted 20 watt LED decorative batten, colour temperature -6500 deg kelvin, ultra slim lighting fixture with extruded polycarbonate, environmental friendly, energy efficient complete all as specified and as directed.

Supply only surface/ wall mounted 10 watt LED decorative batten, colour temperature -6500 deg kelvin, ultra slim lighting fixture with extruded polycarbonate, environmental friendly, energy efficient complete all as specified and as directed.

Supply only bulk head LED light of 10 W, IP - 66, environmental friendly, ultra modern, energy saving, surface mounted complete all as specified and as directed.

Supply only LED Security Light of 30 watts of lumen output - 3000 Lm, energy saving and environmental friendly long life, made up of pressure die cast aluminium housing with high power LED as lighting source and lens embedded PC cover having IP 66 protection and impact resistant (IK-07) fixed to the housing by SS screws, finished with polyster powder coated metallic silver finish after phosphochromate treatment including driver with output open / short circuit protection, over voltage protection, phase to phase protection, surge voltage protection & other safety test as per IS 15885 Part-2/Sec 13 and other accessories complete all as specified and as directed.

Supply only LED energy lamp(invert lamp) 12 W complete all as specified and as directed.

Supply only red bulb 0.5W complete all as specified and as directed.

Supply only green bulb 0.5W complete all as specified and as directed.

Supply only LED recess mounted light luminaires of 36 Watt, 6000K slim panel, IP 40 protection, size (595 x 595 x 11) mm for grid ceiling dust-free installation with high brightness LEDs for glare-free homogenous illumination with electronic driver and all other connected accessories complete all as directed.

Supply only LED of 9W 6000K, joy round recess mounted, compact vertical, round shaped downlighter with removal driver for low ceiling height and all other connected acessories complete all as specified and as directed.

Supply only LED of 12W decorative wll light fixture made up of polycarbonate, suitable for 12W LED and all other connected acessories complete all as specified and as directed.

Supply only factory made sheet metal enclosure MCB DB SPN 8 way with 200 amps rated bus bar 240 volts double door with isolated neutral bar and shrounded bus bar IP protection 43 IK-09 protection having door earthing complete all as specified and directed.

Supply only factory made sheet metal enclosure MCB DB TPN 4 way with 200 amps rated bus bar 240 volts double door with isolated neutral bar and shrounded bus bar IP protection 43 IK-09 protection having door earthing complete all as specified and directed.

Supply only MCB DP, 40 Amp suitable for 240 V, 50 Hz, 'C' series complete all as specified and directed.

Supply only MCB SPN, 32 Amp suitable for 240 V, 50 Hz, 'C' series complete all as specified and directed.

Supply only MCB SPN, 40-63 Amp suitable for 240 V, 50 Hz, 'C' series complete all as specified and directed.

Supply only MCB SP,06 to 32 Amp suitable for 240 V, 50 Hz, 'C' series complete all as specified and directed.

Supply only Angle /Batten holder polycorbonate type body suitable for batten fitting complete all as specified and directed.

Supply only switch flush type of polycorbonate body, single pole, one way 6 Amp, 240 volts (ISI Marked) complete all as specified and directed.

Supply only switch flush type of single pole two way 6 Amp complete all as specified and directed.

Supply only bell push, flush type 6 Amp 240 volt polycorbonate body complete all as specified and directed.

Supply only ceiling rose 63 x 30 mm three terminal, polycorbonate body complete all as specified and directed.

Supply only call bell ding dong AC 240 volts, single phase complete all as specified and directed.

Supply only switch socket combination 6 pin 15 Amp flush type polycorbonate body complete all as specified and directed.

Supply only socket outlet 3 pin 5/6 Amps flush type polycorbonate body complete all as specified and directed.

Supply only switch flush type single pole one way 16 Amp polycorbonate body complete all as specified and directed.

Supply only socket outlet 2 in 1, 3 pin 5/15 Amps polycorbonate body complete all as specified and directed.

Supply only 4 step type ISI Marked electronic fan regulator switch type complete all as specified and directed.

Supply only electronic 5 step ISI marked socket type fan regulator 120/280 volts of 400 watt capacity including connecting up complete all as specified and directed.

Supply only recess mounted LED downlighter of 12 W LED, colour temperature -6500 deg kelvin with inbuilt driver in PC body, premium aesthetics with wider light coverage having cut out dia 112 mm, height 36 mm including all connected accessories complete all as specified and as directed.

Supply only switch 10 Amps, single pole, Modular type, one way, 240 volts(ISI Marked) 1 Module complete all as specified and directed.

Supply only switch 10 Amps, single pole, Modular type, two way, 240 volts(ISI Marked) 1 Module complete all as specified and directed.

Supply only modular bell push, 6 Amp 240 volt one module complete all as specified and directed.

Supply only modular socket 10Amp 2/3 pin 2 module complete all as specified and directed.

Supply only Modular switch 20 Amps, single pole, Modular type, one way, 240 volts(ISI Marked) 1 Module complete all as specified and directed.

Supply only modular socket 10A/20A 3/6 pin combined 2 module complete all as specified and directed.

Supply only PVC insulated, unsheathed flexible twin twisted copper conductor wire of nominal size 40/0.0076 complete all as specified and directed.

Supply only PVC insulated, unsheathed flexible twin twisted copper conductor wire of nominal size 23/0.0076 complete all as specified and directed.

Supply only FRLS PVC insulated, unsheathed single core flexible copper conductor wire of 1.50 Sqmm suitable upto 1100 Voltage grade with ISI marked, conforming to IS 694 with latest ammendment complete all as specified and directed.

Supply only FRLS PVC insulated, unsheathed single core flexible copper conductor wire of 2.50 Sqmm suitable upto 1100 Voltage grade with ISI marked, conforming to IS 694 with latest ammendment complete all as specified and directed.

Supply only electronic 5 step ISI marked socket type fan regulator 120/280 volts of 400 watt capacity including connecting up complete all as specified and directed.

Supply only Hylum sheet 3 mm thick of size 4" x 4" including screws for fixing complete all as specified and directed.

Supply only Hylum sheet 3 mm thick of size 7" x 4" including screws for fixing complete all as specified and directed.

Supply only Hylum sheet 3 mm thick of size 8" x 10" including screws for fixing complete all as specified and directed.

Supply only Hylum sheet 3 mm thick of size 11" x 5" including screws for fixing complete all as specified and directed.

Supply only PVC insulated twin core stranded aluminium sheathed cable of size 6.00 Sqmm complete all as specified and directed.

Supply only PVC insulated twin core stranded aluminium sheathed cable of size 10.00 Sqmm complete all as specified and directed.

Supply only constant current LED driver 240 volt 50HZ suitable for 36 to 50Watt LED light fitting complete all as directed.

Supply only PVC round/circular lid of 65mm dia including MS screw for covering/closing wiring junction complete all as directed.

Supply only PVC space bar saddle with screw fro 20mm dia conduit on existing wall/ceiling for proper fixing of sagged conduit complete all as directed.

Supply only PVC enclosure with surface mounted PVC/gang box, 2 module including fixing of one 06 Amp piano switch & one 6 Amp, 5 Pin socket outlet complete all as directed.

Supply only PVC enclosure with surface mounted PVC/gang box, 4 module (double) including fixing of two 06 Amp piano switch & two 6 Amp, 5 Pin socket outlet complete all as directed.

Supply only PVC enclosure with surface mounted PVC/gang box, 6 module including fixing of five 06 Amp piano switch & one 6 Amp, 5 Pin socket outlet complete all as directed.

Supply only PVC enclosure, surface mounted, totally enclosed (including 16 Amp switch socket) with 6A/16A, switch & socket combined having 4 fixing holes outlet complete all as directed.

Taking down surface / concealed copper / aluminium point wiring (light, bell, fan, socket or power) complete, including fixtures and fittings such as switches, ceiling roses, lamp holders, pendants, sockets, regulators, tubelight fittings etc and making good disturbed surfaces with plaster on walls, floors etc complete all as specified and as directed.

Material and labour for concealed type point wiring for light/fan with 2.5sq mm FR-LSH PVC insulated, unsheathed, single core multistranded copper conductor cable 1100 volts grade, conforming to IS 694 including 2.5 Sq mm FR-LSH PVC insulated unsheathed copper conductor wire as earth continuity conductor drawn through and including medium grade PVC rigid conduit not less than 20 mm dia with its accessories, galvanized pressed steel terminal boxes of thickness not less than 1.2 mm including 3mm thick laminated sheet cover with brass machine screw, washer, lugs for earthing etc and slot cutting in sheet for fixing switches/ socket/regulators etc complete all as specified and as directed. Note:- (i) On RCC ceiling/column, false ceilling, AC/Metallic Sheet ceilling wiring to be done on surface with conduit/PVC casing capping and its accessories or in existing recessed conduit. (ii)The quoted rate is deemed to be included for the cutting & chasing. (iii) Cutting chases on wall for concealed the conduit shall be made good using CM 1:4 and surface finished to match the existing surface & colour and rate is deemed to be included. (iv) Maximum 08 nos of light/fan/bell points (not more than 2x6A sockets ) will have to be provided in each circuit from main MCB DB & Only 01 power point (Socket-outlets, 16 A) will have to be provided in each circuit from main MCB DB.

All as per Sl item No 56.00 above herein before for one light point controlled by two way switch on independent board complete all as specified and directed.

All as per item No 56.00 (here-in-before) but for bell point controlled by bell push complete all as specified and directed.

All as per item No 56.00 (here-in-before) but for one 5 pin socket outlet 5 amps point controlled by one switch on independent board.

All as per item No 56.00 (here-in-before) but for one 5 pin socket outlet 5 amps point controlled by one switch on the same board with other switches.

All as per item No 56.00 (here-in-before) but for one 6 pin socket outlet 16amps point controlled by one switch on independent board.

M&L for Sub main wiring with 2 runs of 4 sqmm single core PVC insulated but unsheathed multistranded copper conductor FRLSH 1100 volts grade cable drawn through and in existing surface / recessed PVC conduit and connecting incoming/outgoing electric connections and one run of 4 Sqmm single core PVC insulated but unsheathed multistranded copper conductor FRLSH 1100 volts grade cable as earth conductor including taking down old unserviceable submain wiring and making good disturbed surfaces complete all as specified and directed. Note : Two runs of 4 Sqmm cable, one run of 4 Sqmm earth conductor and one run of PVC conduit of 25mm dia shall be measured and paid as one unit length.

M&L for Sub main wiring with 2 runs of 6 sqmm single core PVC insulated but unsheathed multistranded copper conductor FRLSH 1100 volts grade cable drawn through and in existing surface / recessed PVC conduit and connecting incoming/outgoing electric connections and one run of 6 Sqmm single core PVC insulated but unsheathed multistranded copper conductor FRLSH 1100 volts grade cable as earth conductor including taking down old unserviceable submain wiring and making good disturbed surfaces complete all as specified and directed. Note : Two runs of 6 Sqmm cable, one run of 6 Sqmm earth conductor and one run of PVC conduit of 32mm dia shall be measured and paid as one unit length.

M&L for Sub main wiring with 2 runs of 10 sqmm single core PVC insulated but unsheathed multistranded copper conductor HRFR 1100 volts grade cable drawn through and in existing surface / recessed PVC conduit and connecting incoming/outgoing electric connections and one run of 10 Sqmm single core PVC insulated but unsheathed multistranded copper conductor HRFR 1100 volts grade cable as earth conductor including taking down old unsv submain wiring and making good the disturbed surfaces complete all as specified and directed. Note: Two runs of 10 Sqmm cable, one run of 10 Sqmm earth conductor and one run of PVC conduit of 32mm dia shall be measured and paid as one unit length.

M&L for Sub main wiring with 4 runs of 10 sqmm single core PVC insulated but unsheathed multistranded copper conductor HRFR 1100 volts grade cable drawn through and in existing surface / recessed PVC conduit and connecting incoming/outgoing electric connections and one run of 10 Sqmm single core PVC insulated but unsheathed multistranded copper conductor HRFR 1100 volts grade cable as earth conductor including taking down old unsv submain wiring and making good the disturbed surfaces complete all as specified and directed. Note: Four runs of 10 Sqmm cable, one run of 10 Sqmm earth conductor and one run of PVC conduit of 32mm dia shall be measured and paid as one unit length.

Supply and laying in replacement of Non Metallic Rigid PVC conduit, ISI Marked, conforming to IS 9537, medium grade, size 25 mm dia including all fittings like bends, elbow reducer, junction, coupler boxes, tee bell mouth etc for protection of cables/wires complete in all respect as specified and directed.

Supply and laying in replacement of Non Metallic Rigid PVC conduit, ISI Marked, conforming to IS 9537, medium grade, size 20 mm dia including all fittings like bends, elbow reducer, junction, coupler boxes, tee bell mouth etc for protection of cables/wires complete in all respect as specified and directed.

Supply and laying in replacement of worn out PVC rigid conduit with uPVC trunking/casing caping of size 50mm x 16mm including fittings conforming to IS 14927/2001, fixed to wall/ceiling surface to cover the cable/wire complete all respect as specified and directed.

M&L for cutting chases, pining in making good to facing where required and pointed in CM (1:3) to ends or edges of brick wall etc and cutting chases for concealed conduit wiring etc and making good, match with existing surfaces by applying white/colour wash cutting not exc 10cm girth complete all as specified and directed.

Supply & fixing MS ring hook (I hook) fastener, M-12 size including drilling on RCC roof for fixing ceiling fan complete all as specified and directed.

Supply & fixing in replacement of MCB, 415 Volt, 10 KA, 4 Pole, 100 Amps, C series complete all as specified and directed.

Supply & fixing in replacement of MCB, 415 Volt, 10 KA, 4 Pole, 63 Amps, C series complete all as specified and directed.

Supply & fixing in replacement of MCCB - 100 Amp, 415 Volt, 4 pole, 16 KA with adjustable thermal & fixed magnetic protection, Ics = 100% Icu, thermal adjustable - 0.8 to 1 In, in accordance with IS/IEC 60068-2-6 standard including making connection, testing and commissioning in DB complete all as specified and directed.

Supply & fixing in replacement of MCCB - 160 Amp, 415 Volt, 4 pole, 16 KA with adjustable thermal & magnetic setting/protection, Ics = 100% Icu, thermal adjustable - 0.8 to 1 In, magnetic adjustment - 5 to 10 In in accordance with IS/IEC 60068-2-6 standard including making connection, testing and commissioning in DB/LT panel complete all as specified and directed.

Supply & fixing in replacement of MCCB - 200 Amp, 415 Volt, 4 pole, 36 KA with adjustable thermal & magnetic setting/protection, Ics = 100% Icu, thermal adjustable - 0.8 to 1 In, magnetic adjustment - 5 to 10 In in accordance with IS/IEC 60068-2-6 standard including making connection, testing and commissioning in DB complete all as specified and directed.

shyam construction (BID ID -3194031)

SHYAMA CONSTRUCTION (BID ID -3186898)

DEVI DAYAL CONSTRUCTION CO (BID ID -3194052)