REPAIR/MAINTENANCE OF INTERNAL ELECTRIFICATION AT PEDONG, ALGARAH, AP ALGARAH, DALAPCHAND AND TEESTA TCP UNDER GE 867 EWS

Amount

Material and labour for point wiring with 1.5 Sqmm (nominal area) PVC insulated un - sheathed single core multi stranded copper conductor FRLS cable 1100 volts grade (conforming to IS) drawn through and including rigid non metallic PVC casing and capping not less than 20mm size, medium grade with all necessary fittings, surface wiring , for light /fan/Bell point controlled by one switch including 1.5 Sq mm PVC insulated copper stranded conductor for earth continuity conductor and connected to earth dolly and to be terminated in 1.6 mm thick pressed steel terminal boxes/ on PVC rectangular block with 3 mm thick plastic laminated sheet cover of suitable size for mounting fittings like switch, socket, fan regulator etc. with 3 mm thick laminated bakelite sheet cover ,for housing switches, socket outlet, regulator etc. complete all as specified or directed including testing on completion incl taking down old point wiring.

All as per item here – in – before but for one 3 / 5 -pin switch socket outlet 6 amps on independent board.

All as per item here-in-before but One 3 pin socket outlet 6 Amps on the same board with other switches.

All as per item here – in – before but for one switch socket outlet 16 Amps on independent board with 2.5 Sqmm multi stranded and 2.5 Sq mm stranded (for earth) PVC insulated un-sheathed copper cable. Make for Item No. 1 to 4 Cable: (i) Finolex, (ii) Plaza, (iii) Havells, (iv) Polycab, (v) KEI, (vi) Anchor Conduit: (i) Kinjal, (ii) Alwyn (iii) Harsh, (iv) Finolex (v) Berlia (vi) Plaza

Dismantling and taking out old us submain wiring of any size making good disturbed surface walls/floors and taking out from site all as directed by Engr-in-Charge.

M&L for sub main wiring in replacement with FRLS two single core PVC insulated and unsheathed fire retardant multi stranded copper conductor cable 1100 volt grade IS-694, marked of 6.0 sq mm size drawn through and including not less than 25mm dia PVC Cassing Capping medium grade ISI marked and conduit junction boxes and accessories such as trees, bends, elbows, reducers, bell mouth tube ends fixed to the surface of wall/ceiling including one run of 6.0 sq mm PVC insulated and unsheathed FRLS multi stranded copper conductor cable for earth wire continuity conductor.Note:- Two runs of single core 6.0 sqmm and one run of 6.0 sqmm copper FRLS cable as earth contuinity conductor and suitable size conduit with connected accessories shall be measured as one lengthall as directed by Engr-in-Charge..

M&L for sub main wiring with FRLS two single core PVC insulated and unsheathed fire retardant multi stranded copper conductor cable 1100 volt grade IS-694, marked of 4.0 sq mm size drawn through and including not less than 25 mm dia PVC assing Capping medium grade ISI marked and conduit junction boxes, terminal boxes and accessories such as tees, bends, elbows, reducers, bell mouth tube ends fixed to the surface of wall/ceiling including one run of 4.0 sq mm PVC insulated and unsheathed FRLS multi stranded copper conductor cable or earth wire continuity conductor.Note:- Two runs of single core 4.0 sqmm and one run of 4.0 sqmm copper FRLS cable as earth contuinity conductor and suitable size conduit with connected accessories shall be measured as one length all as directed by Engr-in-Charge..

Material and labour for point wiring (concealed type) with 1.5 Sqmm (nominal area) PVC insulated un - sheathed single core multi stranded copper conductor FRLS cable 1100 volts grade (conforming to IS) drawn through and including rigid non metallic PVC conduit not less than 20mm dia, medium grade with all necessary fittings, surface wiring , for light /fan/bell point controlled by one switch including 1.5 Sq mm PVC insulated copper stranded conductor for earth continuity conductor and connected to earth dolly and to be terminated in 1.6 mm thick pressed steel terminal boxes/ on PVC Boxes for mounting fittings like switch, socket, fan regulator etc. with 3 mm thick laminated bakelite sheet cover ,for housing switches, socket outlet, regulator etc. complete all as specified or directed including testing on completion including making good surface by plastering and paintaing all as directed by Engr-in-Charge..

All as per item here – in – before but for one 3 / 5 -pin switch socket outlet 5 amps on independent board.

All as per item here – in – before but for one switch socket outlet 15 Amps on independent board with 2.5 Sqmm multi stranded and 2.5 Sq mm stranded (for earth) PVC insulated un-sheathed copper cable. Make for Item No. 5 to 10 Cable: (i) Finolex, (ii) Plaza, (iii) Havells, (iv) Polycab, (v) KEI, (vi) Anchor Conduit: (i) Kinjal, (ii) Alwyn (iii) Harsh, (iv) Finolex (v) Berlia (vi) Plaza

M&L for sub main wiring (concealed type) with FRLS two single core PVC insulated and unsheathed fire retardant multi stranded copper conductor cable 1100 volt grade IS-694, marked of 6.0 sq mm size drawn through and including not less than 25mm dia PVC conduit medium grade ISI marked and conduit junction boxes and accessories such as trees, bends, elbows, reducers, bell mouth tube ends fixed to the surface of wall/ceiling including one run of 6.0 sq mm PVC insulated and unsheathed FRLS multi stranded copper conductor cable for earth wire continuity conductor all as directed by Engr-in-Charge.Note:- Two runs of single core 6.0 sqmm and one run of 6.0 sqmm copper FRLS cable as earth contuinity conductor and suitable size conduit with connected accessories shall be measured as one length.

S&F in replacement compact batten of Aluminium strong body suitable for single 4" T5 LED 20W complete all as specified and directed by Engr-in-Charge. Make:- Cat part No- LT5M20 mushroom tubeset of Make :- Crompton/Philips/Havells or equivalent as approved by GE.

S&F in replacement Energy efficient LED tube light fitting 4", 1x18/20 watt, with bipin holders, connector block, CCT - 6500K, system output lumen not less than 1800lm, aluminium housing, surge protection range 3KV including connecting up with PVC insulated 3 core sheathed 0.5 sqmm copper conductor two numbers PVC mounting blocks for fixing of fitting complete all as specified and as directed by Engineer-in-charge. Make :- Batten: cat pat no: TMC 501 of Philips or Lumiline+BS18WLED865SPCSS of havells or eqvlt. tube rod: philips cat part no: MAS LEDtube 18W 1800lm 865 T8 or Photonultrae2.01213T8SSTL18WLED865SPC of havells or eqvlt as approved by GE.

S&F in replacement LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed. Make :- Crompton cat part no LBH-10-CDL or eqvlt in /Philips/Havells as approved by GE.

S&F in replacement LED wall mounted fitting 9/12W model energy efficient all as specified and directed by Engr-in-Charge of Make :- Crompton/Philips/Havells or equivalent as approved by GE.

S&F in replacement round shape 12watt 220 volt recessed mounted with high efficiency PMMA diffuser soft glare free light complete with driver, holder, led lampsuitable for roof ceiling including connecting upwith flexible copper wire of suitable size complete.mounted fitting 9/12W model energy efficient all as specified and directed by Engr-in-Charge of Make :- Crompton/Philips/Havells or equivalent as approved by GE.

Taking down existing unserviceable service cable of any size and S&F 1100 volt grade heavy duty PVC insulated stranded aluminium conductor cable of cross-sectional area 10 sqmm size (one twin core cable flat or circular served with inner sheathing of PVC tape and overall PVC sheathed) in service connections, suspended by insulating hangers not more than 1 mtr apart including 4 mm suspension wire and testing on completion complete all as specified and as directed by the Engr-in-Charge. Make: PolyCab/Plaza/KEI/Finolex.

Material and labour for 1.5 Sqmm (nominal area) PVC insulated un - sheathed single core multi stranded copper conductor FRLS cable 1100 volts grade (conforming to IS) Red/Yellow/Blue/Black/Green colour drawn through PVC/Steel conduit/casing caping including taking down old unserviceable cable complete all as specified and directed by Engr-in-Charge.

All as per item No here – in – before but 2.5 Sqmm of dia of cable.

All as per item No here – in – before but 4.0 Sqmm of dia of cable.

Re-fixing old serviceble light fittings of any description including clamps etc as required complete all as specified and as directed.

Supplied & fixed on surface Rigid non-metallic PVC casing caping of size 25 mm including of all tees, bends, elbows and fixing accessories such as couplers, lock nuts, saddles, pipe hooks including taking down old broken PVC Casing caping and making good surface complete all as specified and directed by Engr-in-Charge.

Supplied & fixed on surface Rigid non-metallic PVC casing caping of size 20 mm including of all tees, bends, elbows and fixing accessories such as couplers, lock nuts, saddles, pipe hooks including taking down old broken PVC Casing caping and making good surface complete all as specified and directed by Engr-in-Charge.

S&F switch socket combination 3/5 pin 6 amp, Make: Anchor /havells or eqvlt.

S&F switch socket combination 5 in 1, 3/5 pin, 6 and 16 Amp flush type Make: Anchor /havells or eqvlt.

Supply and fixing Piano switch flush button, single pole, 6 amps, one way all as specified and as directed. Make : Anchor/Havells/Plaza

Supply & Fixing Bell, AC 230 Volts single pole including mounting block all as specified and as directed. Make : Anchor/Havells/Plaza

Supply & fixing Bell push flush type, 6 Amps button. Make : Anchor/Havells/Plaza

Supply & Fixing ceiling rose surface bakelite 65 X 50 mm three terminal all as specified and as directed. Make : Anchor/Havells/Plaza

S&F lamp holder PVC/Polycarbonate type with cord grip cap suitable for pendant fitting.

S&F lED retro fit lamp B-22, CCT-3000 K/6500K holder base with polycarbonate body and aluminium heat shrink of 9 watt complete as directed. Make : Havells/crompton/surya/phillips or eqvt.

S&F MCB DB factory IP42 protection class metal double door with 200 Amp rating bus bar 240V including taking down old us DB and MCB of any size completed. Make: Legrand/Schneider/L&T/havells

(a) SPN 12 way

(b) SPN 8 way

(c) SPN 4 way

(d) TPN 4 way 415 volt AC

S&F in repair of 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 AMP, in the MCB DB complete with connection testing and commissioning all as specified and directed by Engr-in-Charge. Make- Legrand, Siemens, Schinder.

All as per item No here – in – before but SPN 32 Amps, 'C' curve.

All as per item No here – in – before but SPN 40 to 63 Amps 'C' curve.

All as per item No here – in – before but TPN 63 Amps 415 volts, 50 Hz, 16kA.

S&F metal plug socket single pole and neutral encloser with two pin earth plug with one No MCB SP 20 Amp, 'C; curve complete all as specified including taking down of existing old unserviceable socket all as specified and directed by Engr-in-Charge .Make:- Legrand/Siemens/Schneider/IndoAsian/havells/L&T/hpl

S&F in repair switch socket combination 3/5 pin 6 amp, Make: Anchor /havells or eqvlt.

S&F in repair switch socket combination 5 in 1, 3/5 pin, 6 and 16 Amp flush type Make: Anchor /havells or eqvlt.

Supply and fixing in repair Piano switch flush button, single pole, 6 amps, one way all as specified and as directed. Make : Anchor/Havells/Plaza

Supply & Fixing in repair Bell, AC 230 Volts single pole including mounting block all as specified and as directed. Make : Anchor/Havells/Plaza

Supply & fixing in repair Bell push flush type, 5 Amps button. Make : Anchor/Havells/Plaza

Supply & Fixing in repair ceiling rose surface bakelite 65 X 50 mm three terminal all as specified and as directed. Make : Anchor/Havells/Plaza

S & F repair lamp holder PVC/Polycarbonate type with card grip cap suitable for Pendent fitting all as specified and directed by Eng-in-Charge.

Taking down carefully electric storage type water heater (Geysers) of any make and any capacity from its mounting place opening for inspection complete including back plate heating element inner copper tank etc de-scaling back plate and heating element by cleaning with sulfuric acid/de-scaling compund and re-assembling of Geysers after repairs carrying out and and re-fixing in same position (replaced items such as soares measured and paid separately) in relevent item including making good to walls with CM (1:3) or PCC (1:2:4) and plastering the wall surface with CM 1:6 and replacement of old nuts, bolts and rubber gasket etc all as directed .Note:- Any type of rubber gasket, rubber washer, screws, insulator tape required in work deem to be included in the rode.

All as per item here-in-before but for descaling/cleaning the inner tank including denting and brazing the leakage joints/points till the leakage stop including carrying out minor repair of outer body surface bottom and top cover complete all as specified and as directed. Note:- Any damage if occurred during the process of cleaning of geysers will be made good by contractor at no extra cost.

S&F in replacement of 2.0 KW capacity heating element, push/screw type with 'triangle cup/'O' Ring type including making electrical connection complete all as directed by Engr-in-Charge.

S&F in replacement of 1.5 KW capacity heating element, push/screw type with 'triangle cup/'O' Ring type including making electrical connection complete all as directed by Engr-in-Charge.

S&F in replacement for thermostat/autocut switches for geysers 25/50 Ltr capacities including making connection complete all as directed by Engr-in-Charge.

S&F in replacement glass wool for insulation of geysers 25/50 Ltrs capacity and any make all as directed by Engr-in-Charge.

S&F in replacement indicator lamp round/rectangular and making electric connections (Red/Green) 220 Volts AC as per site requirement suitable for geysers complete all as directed by Engr-in-Charge.

S&F in replacement safety valve spring locked type with inlet coupling all as specified and directed.

S&F in replacement plug top 15 Amps 240 Volts complete all as specified and directed.

S&F in replacement of fusible plug for suitable capacity of geysers complete all as specified and directed.

S&F in replacement of 2.5 sq mm 3 core PVC insulated unsheathed stranded copper wire complete all as specified and directed by Engr-in-Charge.

S&F heavy duty stainless steel inner tank suitable for 25 Ltrs capacity geyser having high pressure bearing capacity including taking down existing copper/steel inner tank complete all as specified and as directed by Engr-in-Charge.

S&F heavy duty stainless steel inner tank suitable for 50 Ltrs capacity geyser having high pressure bearing capacity including taking down existing copper/steel inner tank complete all as specified and as directed by Engr-in-Charge.

S&F in replacement top cover made of MS sheet 18 SWG duly painted with two coats of super enamel paint by spray painitng suitable for 25 Ltr geysers complete all as specified and as speicified and as directed by Engr-in-Charge.

S&F in replacement top cover made of MS sheet 18 SWG duly painted with two coats of super enamel paint by spray painting suitable for 50 Ltr geysers complete all as specified and as directed by Engr-in-Charge.

S&F in replacement of bottom cover made of MS sheet 18 SWG duly painted with two coats of super enamel paint by spray painting suitable for 25 Ltrs geyser complete all as specified and as directed by Engr-in-Charge.

S&F in replacement bottom cover made of MS sheet 18 SWG duly painted with two coats of super enamel paint by spray painting suitable for 50 Ltrs geyser complete all as specified and as directed by Engr-in-Charge.

S&F in replacement of PVC connection heavy duty with brass/PTMT nuts of reqd length not exceeding 300mm with rubber & PVC washer suitable for 15mm bore GI pipe complete for cold water.

S&F in replacement of hot water outlet connection made of brass chromium plated with union washer suitable for 15mm bore GI pipe for hot water.

Taking down of exhaust fan upto 450mm sweep, opening, replacement of unserviceable accessories, servicing, oiling, greasing, complete overhauling of fan and re-assembling and testing complete for efficient functioning after fixing / hanging in position from ceiling rose to fan complete as directed. (Note : gun metal bush, bearing will be measured and paid under relavant item here-in-after).

Supply only gun metal bush of sizes suitable for exhaust fan upto 450 mm sweep.

Supply only ball bearing No 6203 suitable for fan of existing make type & sweep complete Make:- NBC/SKF/TATA

Checking of exhaust fan (of any sweep) by replacing unserviceable capacitor/ tightening the loose connections if any including testing complete all as directed by Engr-in-Charge. (Note: Capacitor of required capacity will be measured & paid under relavent item here-in-after)

Supply only 2.5/4.0 MFD capacitor suitable for exhaust fan of existing type & sweep complete of 300/250/150mm capacity.

M&L for rewinding of exhaust fan upto 450mm size coil with super quality, super enameled copper wire of suitable gauge and heat vernishing and refixing the same in original position including greasing of moving parts and testing complete to make it fully funtional.

M & L for painting of exhaust fan carefully with one coat of synthetic enamel paint including filling cavities with filler after cleaning all dust etc complete all as directed.

M&L for shifting of exhaust fan from one place to another including making hole at new place and filling of hole at old place including all necessary electric connection, brick work, plastering and 2 coat of painting of size 150, 200, 250 and 300mm dia all as specified and directed.

S&F plastic body exhaust fan 200 /250 mm sweep and self opening louvers for protection from birds & rain water, 200-240 Volt AC supply, connecting up including provision of cable from ceiling rose to fan incl taking down existing old broken plastic exhaust fan. Make: Crompton Greaves/Usha/Bajaj or eqvt.

S&F in replacement of air terminatiion, single pointed copper rod 12mm dia 300mm long all as specified and directed by Engr -in- Charge.

S&F in replacement of aluminium strip 25 x 3.15mm with saddles and fixing screws/mounted on porcelain insulator/laid in trenches for roof conductors and down conductors above ground all as specified and directed by Engr -in-Charge.

S&F in replacement of test point terminal block made of gun metal or phosphorus bronze size 75x75x25mm drilled and screwed including 3 nos. 8mm dia 25mm long hex. head screw all as specified and directed by Engr -in-Charge.

S&F in replacement of GI tubing light grade 40 mm bore complete with all fittings like flange/clamp/nuts/GI wire & bolts etc on roof top of required length for fixing lightening conductors all as required and directed.

S&F in replacemen of porcelain/epoxy white/brown/green spacer insulator with one GI stud bolts with nut and washers with necessary drilling for bolts hole for holding/fixing roof conductor/ down conductor of lightening conductor complete all as specified and as directed.

Supply & fixing in repair PVC rectangular block for mounting switches, sockets, fan regulator etc with 3 mm thick plastic laminated sheet cover of size 100 mm x 100 mm x 50 mm deep complete all as specified and as directed.

All as per above item here-in-before but of size 175mm x 100mm x 50mm.

All as per above item here-in-before but of size 200mm x 150mm x 50mm.

All as per above item here-in-before but of size 250mm x 200mm x 50mm.

Supply & fixing in repair Hylam sheet including suitable size of 04 nos brass screws and cutting of hylam sheet for mounting switch, socket, fan regulator etc of size 100mm x 100mm x 3mm thickness complete all as specified and directed.

All as per above item here-in-before but of size 175mm x 100mm x 50mm.

All as per above item here-in-before but of size 200mm x 150mm x 50mm.

All as per above item here-in-before but of size 250mm x 200mm x 50mm.

M&L for repair/replacement to earthing complete with galvanized steel earth plate electrode 600 x 600 x 6 mm buried directly in ground ( earth pit not less than 2.25 m deep bellow ground level ) with top edge of the plate not less than 1.5 m bellow normal ground level, connected to galvanized earth lead wire 4 mm dia. by means of galvanized iron or steel bolts , nuts , check nuts and washers, and connected to equipments as directed , including funnel with GI med grade watering pipe 20 mm bore , wire mesh , charcoal or coke and common salt in alternate layers of 15 cm compacted thickness all around the earth electrode , with concrete pit in PCC 1 : 3 : 6 type C-1 , 50 mm thick pre cast RCC 1 : 2 : 4 type B-1 cover slab reinforced with 8 mm dia deformed bar 15 cm C/C and suitable handle of 10 mm dia round bar ,GI medium grade pipe for earth lead protection including necessary excavation earth work in soft/loose soil and disposal of spoil to a distance n.exc. 50 m and necessary testing complete all as shown on electrical plate No. 5 of MES SSR Part-I and as directed.

Sub Total of Schedule 'A'

Schedule of Credit (Minus) Rs. 47,882.00 B/F from Ser page No. 35 NOTE: Bidder shall insert credit amount as rate Rs. 47,882.00 in Green field under Col-M. If bidder does not insert the amount the same will be deducted from total amount of Schedule 'A' and accordingly total amount of tender will be considered in deciding the lowest tender.

Sub Total of Schedule of Credit

C. M. AGARWAL AND CO

JAYSHREE CONCERN

MS MAYA PRAKASH GOEL AND SONS

MANOJ JINDAL

MS BRAHMA CONSTRUCTION

SANJAY MITTAL

GEETA CONSTRUCTION