WBPHED /EE/AMD/NIeT-70 of 2023-2024/1

Amount

Supply and Delivery of Following Materials at site:-

90 Watt. LED Highly efficient IP66 LED street-light with aluminium pressure die-cast housing, toughened glass in the front and peanut lens for batwing light distribution,higher spacing between poles and maintenance-free system.(Make-Approved Make)

4 Core X 10 Sqmm, 1.1 KV Grade XLPE insulated Al.Ar Cable as per IS: 7098(Part-I).( From LT PDB Cum MCC Panel to Pole)(Make:-Approved Make)

3 CoreX 2.5 Sqmm industrial flexible copper cable wire/dia-30/0.25 PVC insulated with PVC sheathed as per IS: 7098(Part-I) .(Make:Approved Make)

100 Watt. LED Flood light high efficiency IP66 , with pressure die cast aluminium housing and toughened glass infront with unique flood optics to ensure uniform distribution.(Make-Approved Make)

11 Mtr. Long swaged and welded steel tubular pole as per IS-2713-1980 with CI Base Plate & CI Cap.(Make:-Approved Make)

Supply of 25 mm dia GI Conduit 1.6mm thick.(Approved make)

Supply of GI Bend/Elbow.

Supply of GI saddle etc …

One way Circular Box & cover.

Labour for fitting and fixing 25 mm dia 1.6mm thick G.I. Conduit above ground (exposed) in the wall with previously supplied saddle clamps including cost of jointing materials,holder bat clamps etc.,as necessary, including cutting pipe, making threads etc. complete in all respect with two coats of painting with approved paint any height.

Laying of one No. cable upto 35 sqmm in underground trench 460 mm wide x 760 mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed.(From Kiosk to Pole)

Fixing outdoor type fluorescent/SV/MV light fitting on pole including S&F 40 mm dia x 1.68 mts. long GI Pipe (ISI-Medium) bracket with 40 mmx10 mm thick, MS clamp etc. and providing wiring with 2x1/1.40 PVC insulated and sheathed wire (single core) from loop box at the base of pole to light fiting through pole & bracket (without control switch) including making connections & painting.(For 1 No Street Light)

Fixing only Floodlight Fitting with suitable tie clamps and MS plate for mounting top of the Pole or similar structure.

Erection of Single Steel tubular pole of length as given below with/without sole plate & Cap etc. in CC foundation (Proportionand dimension indicated below), having 600x600x150 mm thick CC (4:2:1) base block below sole plate/pole with hard jhama metal including CC (6:3:1) muffing 0.30 mts. dia and 0.30 mts. above ground level including 3 mm thick neat cemented finish and GI earth bolt after making drilled holes etc. on pole & carriage of pole upto 1.6 Km from Store to work-site including filling up the excavated earth pit with shifted soil and ramming properly.

Above 9.0 Mtr.(Size 0.6x0.6x1.91 mts)

Supplying and Fixing GI water proof looping cable box having hinged GI Top Cover having 4 mm thick with rubber gasket lining, railway type mechanical locking arrangement, earthing terminal with lug etc. of the following sizes as indicated below,Comprising of one 250 V,15 A Kit-Kat fuse unit, one NL on,porcelain insulator etc. and housing the same in pole muffing incl. addition and alteration to the existing CC muffing (6:3:1)after dismantling the damaged looping cable box etc. where necy. incl. painting.

200 x 150 x 100mm.(For 1 No Street Light+ 2 Nos Pole)

Connecting the pole to earth busbar including S & F GI (Hot Dip) wire of size as below,spiral on pole body as required and making connection to equipments with bolts, nuts, washers, cable lugs etc. as required and mending good damages.

No. 12 SWG.

Earthing with GI earth spike(1822mmX20 mm) and grouted the same under the ground level as per direction.

Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials.

4 Core X 10 Sqmm.

80 mm dia, PN-1.0 , Cast iron double flanged single door swing non-return valve generally conforming to IS:5312 Part I, having body, door, cover in graded cast iron to IS:210 Gr.FG200, body and door rings & bearing block of leaded tin bronze to IS:318 Gr.LTB 2 (350mm & above), hinge pin of st.st.AISI410, valve suitable for a maximum working pressure of 10 kg/cm2 (Seat test) & body tested to 15 kg/Sqcm.(Make-Approved Make)

Add. GST@18%

Add. Cess@1%

M/s. SOMA ENTERPRISE

EASTERN INDIA SALES AND SERVICE