PROVN OF DEFICIENT TOILET AT AIRFORCE SCHOOL , POL STORE, RETAINING WALL AND REFILING NEAR ARMOURY BUILDING, AIRCONDITIONS AT VARIOUS, BOTTLE COLLER AT CHAMERLENI, LED FLOOD LIGHT/FOCUS LIGHT ALONGWITH SECURITY FENCING, UPGRADATION OF AIRMEN MESS COO

Surface excavation n,exc 30cm deep and avg. 15cm deep and getting out in hard/ dense soil.

Excavation in trenches not exc 1.5 m wide and not exc 1.5 m in depth for foundation etc or for shafts, wells, ceespits, manholes, pier holes etc n. exc 10 Sqm on plan and not exc 1.5 m depth and getting out in Hard/dense soil.

M&L for Plain Cement concrete, 1:4:8 type D2 (40mm graded agg) as in foundation, filling & Mass concrete work complete all as specified and as directed by Engr-in charge.

M&L for form work to sides of concrete foundation, footing, bases of columns,raft and raft beams, sides and soffits and plinth beams and similar work, vertical or to batten & appear rough finish flat surfaces on concrete all as specified.

M&L for form work to sides and soffit of floor or roof beams, beam hauchings, girders, bressummers, lintels, cantilevers, shelves including sup-ports, overhangs etc also splays between floors and bemss etc& appear rough finish flat surfaces on concrete all as specified.

M&L for form work to sides of Pillars, posts, struts piers, columns etc in squarre, rectangular or polygonal and stanchions & appear rough finished surfaces of concrete all as specified.

M & L for form work to soffits of suspended slabs such as roof slab, floor slabs, landings and similar work, n.exc 200mm thick flat & appear rough finished surfaces of cencrete complete all as specified.

M&L for form wok to edges of concrete flats, treads, breaks in floors, windows cills, concrete railings, floor and roof n.exc 20cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10 cm but n exc 20 cm wide & appear rough finished surfaces of cencrete complete all as specified.

M&L for Formwork to chullah hoods, chajjas, troughs and similar items including edges etc & appear rough finished surfaces of cencrete complete all as specified.

M&L M-25 (Design Mix) using 20mm graded stone aggregate as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete etc complete all as specified and as directed by Engr-in charge.

M&L M-25 (Design Mix) using 20mm graded stone aggregate as in Columns, pillars, piers, posts and struts etc complete all as specified and as directed by Engr-in charge.

M&L M-25 (Design Mix) using 20mm graded stone aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like etc complete all as specified and as directed by Engr-in charge.

M&L M-25 (Design Mix) using 20mm graded stone aggregate as in Beams, cantilevers, bressummers, lintels over 1.5m span etc complete all as specified and as directed by Engr-in charge.

M&L M-25 (Design Mix) using 20mm graded stone aggregate as in Chajjas etc complete all as specified and as directed by Engr-in charge.

S&F Mild Steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, binding spirally for hooping end and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified.

Ditto all as per item No.15 above but 5mm dia and over up to & including 10mm dia in stirrups, spacers & binders complete all as specified.

M&L for brick work Fly ash bricks straight or curved on plan exc 6 m mean radius built in cement mortar 1:4 complete all as specified.

M&L for rendering 10 mm thick internal surfaces in cement mortar 1:6 on fair faces of brick work or concrete surfaces finished even and fair without using extra cement completed all as specified and as directed.

M&L15 mm thick rendering in cement mortar 1:4 mixed with water proofing compound finished with even and smooth Completed all as specified and as directed. Note: Water proofing coumpound included in this item, No separate payment done.

M&L for 5 mm thick rendering in cement mortor 1:3 on concrete surfaces as in ceilings (sunshed, chajja etc) and finishing surfaces even and smooth without using extra cement.

M&L for hard core of broken stone or boulders of gauge n.exc. 63mm deposited spread and levelled in layers n.exc. 15 cm thick watered and rolled/ rammed to a true Level surface.

M & L for 75 mm thick Plain Cement Concrete type D-2 (1:4:8) using 40 mm graded stone aggregate as in sub bases, sub floors finished the surface even and rough complete all as specified and directed.

M & L for 25 mm thick Plain Cement Concrete type B-2 (1:2:4) using 40 mm graded stone aggregate as in sub bases, sub floors finished the surface even and rough complete all as specified and directed.

M & L for 75 mm thick cement concrete (1:3:6) type C2 using 40 mm thick graded stone aggregate as in plith protection laid in alternate bays n exc 2.5m length finished even & fair and joint to be filled with Bituminous mastic filling all as specified.

M&L for coloured Mat finish/Anti skid ceramic tiles 7 to 8mm thick (square/Ractangular) area of each tiles exc 0.11 sqm but n exc 0.18 sqm as in floors etc.,laid over and including 15 mm thick screed bed of cement mortar 1:6 set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L Glazed ceramic coloured tiles in vertical surface 450x300 x 7-8 mm thick joint free set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10mm thick rendering in Cement Mortar 1:4 complete all as specified and directed.

M&L for 15 mm thick rendering on RCC Roof top surface in cement mortar 1:3 mixed with WPC @ 3% by wt of cement finished the surfaces even and smooth complete all as specified . Note:- WPC shall be measured seperately as supply only.

Supply only integral water proofing compound.

M&L for cleaning the newly plastered surfaces thoroughly with wire brushes and providing water proofing treatment all as directed and given here in after (a) Bituminious primer @ 0.3 ltr per Sqm confirming to IS 3384-1986 on roof surfaces prior laying APP. (b) Providing water proofing treatment with polymeric APP modified bituminous membrane(weighing 3.2-3.5 kg/sqm) reinforced with non voven polyester mat of weight 160 gms/sqm as centre core applied by thermo fusion using LPG torch on the bottom portion of the membrane. (c) Applying two coat of bituminous aluminium paint @ 0.20 kg/ sqm over membrane.

S&F Rotational moulded polyethylene water storage tanks 500 litres capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified and directed.

S&F 20mm bore Ball valves, high pressure, PTMT with epoxy coated Aluminium rod and high density plastic ball screwed for iron piped and fixed in position all as specified and directed.

S&F 20mm bore Gun Metal globe or gate valve, with iron wheel head, screwed both ends for iron pipe and fixed complete all as directed.

S&F For Factory made single extruded WPC (Wood polymer composite) solid door/ window/ ceosetory windows & other frames/ chowkhat of size 45 X 70 mm Comprising of virgin PVC Polymer of k value 58-60 (Suspension grade ), Calcium carbonate and natural fibers(wood powder /rice husk/wheat husk) and non toxic additives (Maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screw with full body threaded star headed SS screws having minimum frame density of 750 Kg/cum, screw withdrawal strength of 2200 N (face) & 1100 N(Edge), minimum compressive strength of 58 N/mm2 , Modules of elasticity 900 N/mm2 and resistance to spread of flame of class A Category with property of Being termite /borer proof, water/moisture proof and fire retardent and fixed in position with MS hold fast/lugs/SS dash fasterners of required dia and length complete as per direction of Engineer -in -charge.(MS hold fast/lugs or SS dash fasteners shall be not paid for separately. NOTE:- For WPC solid door/window frames,minus 5 mm tolerance in dimension ie depth and width of profile shall be acceptable but no extra payment on this account shall be made

Ditto as per item No 32 but Frame size 65 x 100 mm Single rebate.

S&F For 28-30 mm thick prelaminated moulded WPC factory made 100% solid door (conforming as per IS-4020) made from 100 % lead free single extruded with 2,4 or 6 raised panel design on the front side with 10 mm deep mould on both side with wood grain texture with density not less than 650 kg/cum. Manufactured by an ISO: 9001-2015 certified company. The door should be water proof, termite proof, fire etardant and having screw holding capacity complete all as specified.

S&F For 28-30 mm thick prelaminated Flush WPC factory made 100% solid door (conforming as per IS-4020) made from 100 % lead free single extruded side with wood grain texture with density not less than 650 kg/cum. Manufactured by an ISO: 9001-2015 certified company. The door should be water proof, termite proof, fire etardant and having screw holding capacity complete all as specified.

S&F 100 mm long Stainless steel butt hinges, with mild steel hinge pin, bright polished and fixed complete all as specified and directed.

S&F 250 mm long Stainless Steel sliding door bolt withstand (Aldrop bolt 19mm dia ),staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed screw etc. completed and as directed

S&F 150 mm size Stainless Steel barrel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed complete all as specified and as directed.

S&F 150 mm size long extruded Stainless Steel handles designer type, fabricated type polished etc completed and as directed .

M&L for applying 2 mm thick wall care putty in two layers on newly plaster surface of walls/Ceiling to achive smooth complete all as directed.

M&L for preparation of newly plastered wall surfaces and applying two coats of distemper oil emulsion over a coat of alkali resistant primer complete all as specified and directed.

M&L for preparation of newly plastered Ceiling surfaces and applying two coats of distemper oil emulsion over a coat of alkali resistant primer complete all as specified and directed.

M&L preparing new plastered surfaces of walls and applying two coats or more [email protected]/10sqm of Exterior acrylic emulsion Weather coat Anti Fungal over one coat of [email protected]/10sqm complete as specified and directed.

Supplying &Laying of 20 mm outer dia CPVC pipes with SDR 11 and Plain CPVC SDR 11 fittings and fixed to wall, ceiling or laid in floor complete all as specified and directed. Note :- Rate inclusive of chase cutting in stone/brick masonary of concealed tubing.

Supplying &Laying of 25 mm outer dia CPVC pipes with SDR 11 and Plain CPVC SDR 11 fittings and fixed to wall, ceiling or laid in floor complete all as specified and directed. Note :- Rate inclusive of chase cutting in stone/brick masonary of concealed tubing.

S&F Vitreous China wash basin (WHB), white, flat back, size 450x300mm excluding taps and plug but including Angle Iron brackets, 32 mm dia CP waste coupling, 32mm bore PVC Waste Pipe complete all as specified and directed.

S&F 40 mm dia low density polyethylene (LDPE) pipes of pressure rating 6Kg/Sq. cm laid in floor or fixed to walls all as specified and as directed.

S&F Cast copper alloy CP angle valve type stop cock/Angle cock suitable for 15mm bore pipe screwed at both ends or high pressure with Capstan head Complete all as specified and as directed by Engineer-In-Charge.

Supply and fix 10 litres capacity PVC valveless, syphonic action type, flushing cistern, low level, white with inlet ball valve, float, handle , PVC Flush Pipe and brackets including taking down old cistern all as specified and as directed.

S&F Vitreous china half stall urinal (White) with grating & union for discharge pipe including providing and fixing CP pipe for spreader and CP push cock etc complete all as specified & as directed.

S&F PVC connection 15mm size with PTMT nuts of length 450mm Complete all as specified and as directed by Engineer-In-Charge.

S&F 2 way bib taps with falnge of bore size 15 mm, cast copper alloy,chromium plated, fancy type, with crutch or butter fly handle screwed down,screwed for iron pipe or for brass ferrule Complete all as specified and as directed by Engineer-In-Charge.

S&F 15 mm bore pillar taps, Cast Copper alloy, with capstan heads, fancy type, chromium plated, screwed down high pressure, with or without lettered "Hot or Cold" with long screwed shanks and fly nuts, screwed for iron pipe etc complete as specified and directed.

S&F health faucet with one metre long flexible tube and wall hook chromium plated, screwed down for iron pipe complete all as specified and directed by engr in charge.

S&F Brass Chromium plated Tubular Towel rail, 20mm dia, D type, 60 cm long between flanges fixed to wall complete all as specified and directed.

S&F Vitreous china wash down water closet pan (pedastal pattern),including white PVC seat cover closed pattern with flat bottom and cover and mild steel chromium plated hinge device ,connection to drain or outgoing pipe and to flushing pipe, antisyphonage pipe joint to socket or stopper etc. complete all as specified and directed.

S&F for toilet paper holder for vitreous china fixed to walls with stainless steel fix with screws complete all as specified and directed by engr in charge.

S&F fency type soap dish stainless steel as appoved by GE complete all as specified and as directed by engineer-in-charge.

S&F100 mm dia Grating doom of PTMT (minimum weight 25 gms) fixed in cement concrete type B-1 (1:2:4) all as directed.

M&L for 15- 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms, shelves and like jointed over and including 10mm thick cement mortar 1:4 screed and pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite, incuding grinding, moulding and polishing to exposed edges complete all as specified.

Material and labour for Aluminum powder coated (Thickness of powder coating not less than 50 micron) as in ventilators and window chowkat and shutter, cut to size, jointed together with cadmium plated steel screws including rubber packing, aluminium beading or gasket for aluminium sections, including fixing sheet glass and necessary fittings complete, screws plugs, handle, tower bolt, stay hooks etc., all as specified and directed. Notes : (i) Weight of aluminium sections shall only be measured. (ii) Sheet glass will be measured and paid separately under supply only item No-64. (iii) Wire mess will be measured and paid separately under supply only item No-65.

S&F Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of arpeture ,1.40 mm and fixed with stainless stell wire stapples complete all as specified and directed.

S&F for 'P' Trap 110 mm dia PVC(SWR) Pipe fixed with Water Closet complete all as specified and directed by engr in charge.

S&F 110 mm dia PVC ( SWR) WC Connector with lip ring Complete all as directed.

S&F 110 mm bore dia PVC (SWR) Junction single (Single T) equal or unequal fixed Complete all as directed.

S&F 110 mm dia PVC ( SWR) bends any radius diminishing pieces or tapers Complete all as directed.

S&F 110 mm dia PVC ( SWR) reducers Complete all as directed.

S&F 110 mm bore dia PVC (SWR) pipe single socketed in any length with rubber ring joints, laid in trenches or in floors complete all as directed.

S&F 110 mm bore dia PVC (SWR) pipe single socketed in any length with rubber ring joints fiexed to Walls complete all as directed.

S&F Stack clamps out of 50 mm by 5 mm flat iron and 16 mm dia round iron strays, including bolts and nuts and securing ends of strays to wall or roof complete all as directed.

S&F 110 mm bore dia PVC (SWR) vent cowl complete all as directed.

S&F100 mm dia PVC Floor Trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) all as directed.

Material & Labour for concrete bed type D2 PCC 1:4:8(Using 40mm graded aggregate) to drain pipes 200 mm internal dia including packing under, and haunching against the sides of pipes after they are laid & tested dia complete all as specified and directed.

Material & Labour for Reinforced concrete pipe, class NP-2, 200 mm internal dia laid in trenches & jointed complete with collars all as specified and directed.

M&L for Pre cast reinforced cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate as in cover slab of man holes including necessary form work and set in CM 1:4.all as specified and directed.

M&L for cutting into existing manhole for connecting new drains, making good to drain pipe internal dia and rendering, cutting out existing benching for and forming branch channel in cement concrete 1 :2:4 type B1 using 20mm graded stone aggregate smooth finished & reforming benching as required complete all as directed.

Removing excavated material (Soils) to distance of exc 250 m but n exc. 500 m and depositing where directed at a level n. exc. 1.5 m above the starting point.

Refilling filling in including spreading levelling watering and well ramming in layers n.exc. 25cm deep as in hard/dense soil copletete all as specified .

M&L for Treating the bottom and sides of excacation at the rate of 5 Litres of Anti-Termite emulsion per square metre of surface area complete all as specified.

M&L for treating the backfill in contact with foundation at the rate of 7.5 litres of Anti termite emulsion per square metre of vertical surface all as specified

M&L for treating the top surface of filled earth at the rate of 5 Litres of Anti termite emulsion per square metre of surface all as specified

M&L for treating the soil under plinth protection at the rate of 5 Litres of Anti termite emullsion per square metre of surface area all as specified.

Rough excavation not exceeding 1.5 m deep and getting ou in soft/loose soil complete all as specified and directed.

Removing excavated material exc 500m & n exc 1.5 Km and depositing where directed at a level n exc 1.5m above the starting point complete all as specified and directed.

M&L for Hardcore of gauge not exc 63mm broken stone or boulders deposited,spread and levelled in layers not exc 15 cm thick, watered and rolled/rammed to a true surface for levelling the surfaces, complete all as specified and directed.

M & L for 100mm thick Plain Cement Concrete type D 2 1:3:6 using 40 mm graded stone aggregate as in sub bases, sub floors finished the surface even and rough complete all as specified and directed.

M&L for Sand filling under floors or in foundations including watering and consolidation under paver blocks complete all as specified and directed.

M&L for Machine pressed precast concrete interlocking paver block any shape and size rubber moulded confirming to IS 15658-2006 of 60 mm thickness, M-35 grade with grey cement and pigments.

M&L For cement concrete type B-0,1:2:4 (20mm graded aggregate) as in coping,kerbs, ramp including slightly rounded or chamfered angles and throating all as specified and directed by Engineer-in-Charge

Removing excavated material not exceeding 500 metre and depositing where directed at a level not exceeding 1000 metre above the starting point complete all as specified and as directed.

Material and labour for Machine cut kota stone slab flooring 20 to 25mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab over and including 15 mm thick cement screed bed in cement mortar 1:6 including rubbing and mirror polishing complete all as specified and as directed.

Material and labour for kota stone slab 20 to 25mm thick in riser of steps, skirting, dado and pillars laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab over and including 10mm thick rendering in cement mortar 1:4 including cutting, rubbing and mirror polishing complete all as specified and as directed.

M&L for 10 mm thick rendering on RCC Roof top surface in cement mortar 1:3 mixed with WPC @ 3% by wt of cement finished the surfaces even and smooth complete all as specified . Note :- WPC shall be measured seperately as supply only.

Material and labour for Aluminum powder coated sliding window with aluminium powder coated three track frame of size 116mm x 25mm & 1.6 mm thick with 3 Nos sliding shutters of powder coated aluminum section (top rail bottom rail and style of size 50 mm X 25mm &1.4mm thick) screwed to walls/floor including provn of tinted sheet glass panels of 5mm thick fitted in pannels (2 Nos) and one shutter with stainless steel wire cloth 0.36 mm nominal dia and width of aperture 1.40mm with and including necessary locking device, jointing cleats, glazing clips, rubber packing beading , aliminum bidding and screws etc. complete all as specified and as directed by Engineer-in-Charge..

Excavation in post holes each not exceding 0.5 cum getting out in hard/dense soil and removing excavated soil to a distance not exceding 50m and making good surface complete all as specified and directed.

M & L for Cement Concrete type B- 2 (1:2:4) using 40 MM graded stone aggregate as in foundation filling and mass concrete for fixing of MS post including necessary form work if required at site complete all as specified and directed.

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof overing/cladding to wall, fixed with self tapping screws all as specified and directed.

S&F steel work in tubular trusses, purlins, rafter, posts, gusset plates cleats etc including special shape washers etc complete using ERW or induction butt welded tubes confirming to IS 116-1979 grade (medium grade all as specified and directed.

S & F 150 mm Cast Iron or malleable cast iron handles, cast type, stove enamelled black fixed all as directed.

S & F 300 mm long Mild steel sliding door bolt with plate type ,stove enamelled black,with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed all as directed.

S&F Steel Frame work as in door or gate of angle or other section with gusset plates ,rails,braes,etc completed, drilled dfor fixing of steel sheeting or other covering. door etc to be prepared for hanging oor sliding with and including either hooks and hinges or stell hanging door fittings,also fastening and fixing complete all as specified and directed. Fe-410-W (Grade-250 Quality A)

M&L for applying two coat of Synthetic enamal paint over a coat of red oxide primer on new steel based surfaces exc.10cm width or girth including preparation.

M&L framed work such as grills grating etc with end of bars shoulderd and/or riveted . Welded or forged into spikes. Framedguard bars iron doors . Ladders framed baiusters , walk ways . Railings , frame work of of water tanks and ssimilar work conforming to fe410.

S&F 25 mm dia stainless steel Drapery curtain rod complete with stainless steel bracket and side caps fixed in position by drilling holes in walls and fixed the brackers with rawl plug and steel screw compete all as specified as directed.

M&L for applying 2 mm thick wall care putty in two layers on newly plaster surface of walls to achive smooth complete all as directed.

M&L for preparation of newly plastered /wall care putty surface and applying two coats of distemper oil emulsion over a coat of alkali resistant primer complete all as specified and directed.

Material and labour for preparation of newly plaster surfaces of ceiling and applying three coats of white wash complete all as specified and as directed.

M & L for 100 mm thick cement concrete (1:3:6) type C2 using 40 mm thick graded stone aggregate as in plith protection laid in alternate bays n exc 2.5m length finished even & fair and joint to be filled with Bituminous mastic filling all as specified.

M & L for 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms, shelves and like jointed over and including 10mm thick cement mortar 1:4 screed and pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite, incuding grinding, moulding and polishing to exposed edges complete all as specified.

M&L for 100 mm thick Cement concrete in foundations,Type D2 in CM 1:3:6 using (40mm graded stone aggregate) filling and mass-concrete all as specified and directed.

M & L for sand (dry) as in filling of under layer of paving in cushioning to paver blocks including watering and consolidation all as specified and directed.

M & L for Machine glazed pressed precast conctete minimum M-35 grade vibro compacted colour interlocking paver block (rubber moulded) any shape and size confirming to IS not less than 60 mm thickness complete all as specified and directed.

Removing Excavated material (Soils) to distance of exc.250 m but n.exc.500 m and depositing where directed.

Excavation in trenches n.exc. 1.5 M wide and n.exc. 1.5 M in depth for foundation, man holes,wells etc and getting out in Hard / dense soil complete all as specified and as directed by Engr-in charge.

All as per Item No. 119 above but in Soft/ disintegrated rock.

All as per Item No.119 above but in Hard rock.

M&L for 100 mm thick Cement concrete in foundations,Type D2 in CM 1:4:8 using (40mm graded stone aggregate) filling and mass-concrete all as specified and directed.

M&L for Walling of Random Rubble,Uncoursed,Well Bounded, Beddedand solidly hearted, built in Cement mortar 1:4 and brought up to course level Complete all as specified and directed by Engineer-in-charge.

Labour for Hammer Dressing with maximum depression on face from straight edge held against the dressed surfsce n exc to lime or sand stone wall facing and dressing of face beds and joints, as specified of Random rubble walling, uncoursed or brought upto course complete all as specified

M&L for Boulder filling dry,handpacked tightly, as in wire crate apron bounds(wire crate measured seperately complete all as specified

Only Labour For All as per Item No 7.00 above but by using stone boulders material obtained from excavation vide item no. 3.00 here in before.

M&L for flush pointing to block in course or ashlar masonary or concrete block walling in cement mortar CM 1:4 Complete all as specified and directed by Engineer-in-Charge

M&L for Providing precast cement concrete in window or door cills, lintels, bressumers, steps, quoin blocks (for use with masonry), string courses, copings. kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, ancho-rage blocks, bonders (for stone wallin). corbels, brackets, etc. (of any section indicated), with plain fair faces, including chamfers, weatherings, throat- ing etc. and setting in mortar complete with joints to match set in cement mortor CM 1:4 Type B1 1:2:4 (20mm Graded Aggregate ) Complete all as specified and directed by Engineer-in-Charge

M&L for 4-5 mm thickness PVDF ACP sheet for view cutter (AF blue colour) suitable for outdoor with provision of small window of the same sheet in outdoor including all Screw bolts & fitting work complete all as specified and directed. Note: Location-762 SU & 793 SU Tech Area(B-top).

S&F in repair for bearing Wheel 4-5 inch dia for MS Sliding gate including fitting,erection of Sliding gate (of weight 500-1500 kg) etc work complete all as specified and directed. Note: (1) Location-793 SU Admin&Tech Area(B-Top) (2) Weight of Bearing Wheel included in Unit rate.

M&L for making wooden cabinet below Kitchen platform with following Details :- (i) The Cabinet Should frame work of solid wood plastic composite (WPC). (ii) The shutter Should be 18mm Factory made 100% solid wood plastic composite (WPC) flush type shutter and horizontal/vertical shelves of 18mm thickness one side laminated consisting of panel of PVC profile of 18mm ( =+-.07mm) thick of density 650kg per Cum manufactured by ISO 9000 certified company. (iii)M&L SS fancy type handles 100 mm for kitchen shutter/C3 shutter as approved and qty 1 handle per shutter . (iv) Auto closing hinges/Fancy type stainless steel soft close hinges for door shutter of CB 7 kitchen Shutter of SS 110 degree opening angle, soft closing concealed hinges, ISI marked qty 02 hinges per shutter . (v) Internal Shelves : Made from 18mm thick laminated WPC board, laminated both sides (white), fixed to carcass with SS screws and shelf supports. (vi) M&L for magnetic door lock for door shutters of CB & Kitchen shutters of SS ISI mark- Qty No-1 per shutter all as specified & directed. Note: (i) Only Front elevation Area taken for Measurement. (ii) WPC Make :- Rajeshri Plasitwood, M/s Navratna Special Chenmical and any Approve Make.

M&L for making wooden Cabinet above Kitchen platform fixed wall having following Details :- (i) The Cabinet Should frame work of solid wood plastic composite (WPC). (ii)Back Side :- Made from 12mm thick WPC board, laminated on both sides with white laminate,flush fixed to carcass with stainless steel screws. (iii)The shutter Should be 18mm Factory made 100% solid wood plastic composite (WPC) flush type shutter and Horizontal/vertical shelves of 18 mm thickness one side laminated consisting of panel of PVC profile of 18mm ( =+-.07mm) thick of density 650kg per Cum manufactured by ISO 9000 certified company. (iv) M&L SS fancy type handles 100 mm for kitchen shutter/C3 shutter as approved and qty 1 handle per shutter . (v) Auto closing hinges/Fancy type stainless steel soft close hinges for door shutter of CB 7 kitchen Shutter of SS 110 degree opening angle, soft closing concealed hinges,ISI marked qty 02 hinges per shutter. (vi) M&L for magnetic door lock for door shutters of CB & Kitchen shutters of SS ISI mark-Qty No-1 per shutter all as specified & directed. Note: (i) Only Front elevation Area taken for Measurement. (ii) WPC Make :- Rajeshri Plasitwood, M/s Navratna Special Chenmical and any Approve Make.

Material & Labour for providing and fixing stainless steel (Grade 304) frame for modular kitchen frameing works made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement.

S&F for ball bearing runners 450 - 600mm telescopic channel (KTS-20) full extension load capacity 50 kgs, Make : Hexa, Hettich, Hafele

S&F in repair for Stainless steel sinks made of stainless steel 1.00 mm thick stainless steel sheet of grade 304 for kitchen fixed with plugs, washers, overall size 610mm x 510mm x 200mm with bowl size 560mm x 405mm including chromium plated waste coupling of 32mm dia, including fixing cantilever brackets,PVC waste pipe 32mm dia and 600mm long (minimum), sink of any size, complete all as specified and directed.

S&F for Perforated Cutlery basket, of stainless steel 304 grade, for utensils, electro plated, of size 420mm x 485mm x 200mm including necessary nuts, bolts, fixed in modular drawer box fixed below kitchen platform including 18mm wpc front all as per manufacturers instructions, complete all as specified and directed. MAKE:- Product code No. 6153 of Godrej or techno-commercially equivalent model in any other makes as approved by GE. NOTE : Rate is inclusive of covering the basket with 18 mm WPC boards having density 650kg per Cum manufactured by ISO 9000 certified company.

S&F for Multi Purpose basket, of stainless steel 304 grade, for utensils, electro plated, of size 420mm x 485mm x 200mm including necessary nuts, bolts, fixed in modular drawer box fixed below kitchen platform all as per manufacturers instructions, complete all as specified and directed. MAKE:- Product code No. 6161 of Godrej or techno-commercially equivalent model in any other makes as approved by GE NOTE : Rate is inclusive of covering the basket with 18 mm WPC boards having density 650kg per Cum manufactured by ISO 9000 certified company.

S&F for Multi Purpose basket, of stainless steel 304 grade, for utensils, electro plated, of size 420mm x 485mm x 150 including necessary nuts, bolts, fixed in modular drawer box fixed below kitchen platform all as per manufacturers instructions, complete all as specified and directed. MAKE:- Product code No. 6161 of Godrej or techno-commercially equivalent model in any other makes as approved by GE NOTE : Rate is inclusive of covering the basket with 18 mm WPC boards having density 650kg per Cum manufactured by ISO 9000 certified company.

S&F for Thali-plate basket, of stainless steel 304 grade, for utensils, electro plated, of size 420mm x 485mm x 200mm including necessary nuts, bolts, fixed in modular drawer box fixed below kitchen platform all as per manufacturers instructions, complete all as specified and directed. MAKE:- Product code No. 6166 of Godrej or techno-commercially equivalent model in any other makes as approved by GE NOTE : Rate is inclusive of covering the basket with 18 mm WPC boards having density 650kg per Cum manufactured by ISO 9000 certified company.

S&F for Cup and saucer basket, of stainless steel 304 grade, for utensils, electro plated, of size 420mm x 485mm x 100mm including necessary nuts, bolts, fixed in modular drawer box fixed below kitchen platform all as per manufacturers instructions, complete all as specified and directed. MAKE:- Product code No. 6161 of Godrej or techno-commercially equivalent model in any other makes as approved by GE NOTE : Rate is inclusive of covering the basket with 18 mm WPC boards having density 650kg per Cum manufactured by ISO 9000 certified company.

S&F for Plate rack, made of stainless steel of grade 304, 1.00 mm thick, of size 800mm x 600mm (approximate), fixed with CP brass screws and PVC cleats, including taking down unserviceable plate rack, complete all as specified and directed. MAKE:- Cat No. SSKPR-313 of Bluestar or techno-commerically equivalent model in any one of the make as mentioned in list of makes here-in-after.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing and rubbish off the premises complete all as specified and directed. Note: Rate inclusive for demolish material should be out of MoD land.

M&L for Glazed ceramic joint free coloured tiles of size 600x300/450x300, 7 to 8 mm thick as in vertical surface, set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of tile, laid over and including 10 mm thick plaster in cement mortar 1:4 complete all as specified and directed.

Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc complete all as directed.

M&L for brick work with sub class ‘B’ bricks straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 in toe wall all as specified & directed.

M&L for rendering 15 mm thick in cm (1:4) of cement on brick work or concrete surfaces and finished the surfaces even and smooth without using extra cement all as specified & directed.

Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for,including reinforcement cut as required to facilitate demolition of concrete, complete all as specified and directed.

M&L for reinforced cement concrete type B1 (1;2;4) nominal mix using 20 mm graded broken stone aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, shelves and the like all as specified & directed.

M&L for Formwork to soffits of suspended slabs such as roof slabs,floor slabs,landings and similar work n exc 200 mm thick all as specified & directed.

S&F in repairs CP Swan neck Bib tap (straight line) (model) with wall flange & flow restrictor 3.80 LPM at 3 bar pressure suitable for 15mm bore of pipe, fancy type of Jaquar model CAT Part No FLR-CHR-5047 NGD or equivalent,Complete all as specified and as directed.

Taking up or down steel tubing and connections, including cleaning for re-fixing or removal to store bore of pipe 15mm complete all as directed.

Supplying and laying of 15/16 mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings and fixed to wall, ceiling or laid in floor. Note :- Rate inclusive of chase cutting in stone/brick masonry of concealed tubing.

S&F of Stainless steel sheet (Grade 304) of thickness not less than 1.00 mm including drilling holes for attaching screws in walls, using a drill press ,including all fittings & fixtures all as specified & directed.

Dismantling of stone slab and tiles of any description or thickness in floors or walls, aprons etc tiles laid, bedded and pointed in any mortar complete all as directed.

M&L for demolition of concrete(unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) and removing debris to location outside defence land complete all as directed.

M&L for 75 mm thick PCC type B2 1:2:4 (using 40 mm graded aggregate) as in Sub base,Sub floors,floor,pavings,Plinth protection etc. finished the surface Fair complete all as specified and directed.

M&L for 25 mm thick PCC type B2 1:3:6 (using 40 mm graded aggregate) as in Sub base of flooring (at ground floor) finished the surface rough complete all as specified and directed.

M&L for prepolished Machine cut kota stone slab flooring 20-25 mm thick over 15 mm thick cement screed base 1:4 laid and jointed in neat cement slurry with pigment to match the shade of slab incl rubbing & polishing complete all as specified and as directed.

M&L for 20 -25 mm thick Granite black colour,work (table rubbed and polished) in steps, jambs,pillars, window-cills, cooking platforms,shelves and like jointed over and including 10 mm thick cement mortar 1:4 screed and pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite,incuding grinding, moulding and polishing to exposed edges complete all as specified and directed.

M&L for Point wiring with 1.5 Sqmm (nominal area) PVC ( FRLSH) insulated sheathed copper stranded conductor cable run in and including concealed in wall/floor PVC conduit not less than 20 mm as per IS with all fittings such as bends, tee,junction boxes,etc of suitable size including 1.5 Sqmm PVC(FRLSH) insulated copper earth continuity conductor connected to common earth dolly and including MS/GI sunken boxes with modular inner & surface plate suitable for housing modular switches, sockets,fan regulators etc for one light/fan/call bell point controlled by one 1- way switch complete all as specified and as directed by Engr -in -Charge.

All as per Srl item No. 1 above but One 3 pin socket out let 5 Amps on same /below board with other switches.

Supply and fix modular switch, 6 Amps, one way, 1 module all as specified and directed.

Supply and fix modular socket outlet, 6 amps, 2/3pin combined, 2 module complete all as specified and directed.

Supply and fix ceiling rose, surface type, PVC/ Polycarbonate insulated body of size 50 x 28 mm two to three terminals all as specified and directed.

M&L wiring for circuit/ sub main wiring of 2x4 Sqmm + 1x4 Sqmm earth wire, alongwith eart wire PVC (FRLSH) insulated copper conductor, single core, 1100 v grade cable including in concealed PVC conduit complete all as directed by Engr -in- Charge.

M&L wiring for circuit/ sub main wiring of 2x1.5 Sqmm + 1x1.5 Sqmm earth wire, alongwith earth wire PVC (FRLSH) insulated copper conductor, single core, 1100 v grade cable in including PVC casing caping/ PVC conduit complete all as directed by Engr -in- Charge.

Supply and fix MCB SP 6-32 Amps, AC, 240V, 50 Hz, C series complete all as specified and directed.

Supply and fix MCB SPN 6-32 Amps, AC, 240V, 50 Hz, C series complete all as specified and directed.

Supply and fix in repair Sheet metal enclosure for DB’s SPN, with 100 amps rated bus bar , 4 way ,240 volts double door. Make : Standard/HPL/Legrand.,Complete all as specified & as directed by Engineer-In-Charge.

Supply and fix in repair Sheet metal enclosure for DB’s 2 way 240 volts. Make : Standard/HPL/Legrand,Complete all as specified & as directed by Engineer-In-Charge.

S & F in repairs and connecting up LED 22 watt inverter fitting 6500K 4 feet with 100 lumen/watt on AC & 450+-10% on DC,PC housing with off white end cap,ABS material off white with surge protection upto 4KV with inverter back up upto 3.5 Hrs & high voltage sustain capacity 440Vac@ 2Hrs ,internal wire PVC coated cable 0.75 sq mm RED/BLACK 12 CCA including all necessary fixing arrangements fastners ,holding brackets & screw etc complete. Crompton cat No LDINVGL22-CDL or equivalent in Philips/Havells ).

S & F in repairs and connecting up LED 10 watt fitting 6500K 2 feet with 100 lumen/watt,aluminum housing extruded in thermal conductive material with powder coated in white colour Extruded serration High Optically efficient plastic FR grade material in milky white,Spring Steel Nickel plated,Inj. Moulded engineering plastic Brown in colour Five year written warranty from manufacturer including 23/00.0076 size 3 core copper flexible wire from connector to ceiling rose/adoptor including all necessary fixing arrangements complete. Crompton cat No CCS-103-10-65-SL-DP-NWH or equivalent in Philips/Havells/Wipro ).

S & F in repairs and connecting up LED 5 watt fitting 6500K 1 feet with 100 lumen/watt,aluminum housing extruded in thermal conductive material with powder coated in white colour Extruded serration High Optically efficient plastic FR grade material in milky white,Spring Steel Nickel plated,Inj. Moulded engineering plastic Brown in colour Five year written warranty from manufacturer including 23/00.0076 size 3 core copper flexible wire from connector to ceiling rose/adoptor including all necessary fixing arrangements complete. Crompton cat No CCS-103-05-65-SL-DP-NWH or equivalent in Philips/Havells/Wipro ).

Supply, Installation, Testing and commissioning LED street light fittings 25 watt with minimum110 lumen/ watt system lumen output .The luminaire should have cool white coloure temperature with minimum 5700 K. The luminaire housing should be made of pressure die cast aluminium Epoxy power coated with wether proof gasket for LEDs and control gear compartments, heat resistance toughened clear glass fixed with SS screw with IP 66 protection,.complete all as specified and directed by Engineer- in-charge.

Supply and fix MS single arm bracket 1.5 mtr long 40 mm dia bore including all fitting for cable protection etc laid in floor or fixed to poles / wall with clamps etc all as specified and directed.

S&F Exhaust fan 300 mm sweep, 4 blade ( Mettallic type ) with louvers, operated on 230/240V AC Single phase electric supply complete duly grauted bolts in the wall fixed with nuts, bolt and washers complete matching with the existing including connecting with 3 core multistranded copper conductor cable cordas as per manufacture recommendation from ceiling rose to exhaust fan connector complete all as per specified and directed by Engr-in- Charge .

Suppy and fix XLPE insulated ,armoured heavy duty electric cable with aluminium conductor 1100 volt grade ,cross sectional area 10 sq mm 4 core on wall surface with help of pressure plate ,Saddles etc, complete all as specified and as directed by Engineer-in-charge.

Excavation in trenches not exceeding 1.50 mtr wide and not exceeding 1.50 meter in depth and getting out in soft/loose soil all as directed.

Excavation in trenches not exceeding 1.50 mtr wide and not exceeding 1.50 meter in depth and getting out in hard/dense soil all as directed.

Drilling and tapping CI/DI/GI water mains (in position) for branch connections of the internal dia 20 mm,complete all as specified & as directed by Engineer-In-Charge.

Supply & Fix GI water tubing medium grade with all fitttings and fixed to wall, floor, ceiling for bore of 25 mm diameter, complete all as specified and as directed by Engineer-In-Charge.

S&F Straight plain brass ferrules (or connecting screw) screwed both ends and fixed 20 mm dia complete all as specified & as directed by Engineer-In-Charge

Supply & Fix in replacement of Bronze gate valve (Hex type) ISI marked screwed both ends of 25 mm diameter Art No 1006 of Make: Zoloto or Equivalent in SEIKO/GEM complete all as specified and as directed by Engineer-In-Charge.

M&L for Point wiring with 1.5 Sqmm (nominal area) PVC ( FRLSZH) insulated sheathed copper stranded conductor cable run in and including concealed in wall/floor in stove enamelled steel conduit not less than 20 mm as per IS with all fittings such as bends, tee,junction boxes,etc of suitable size including 1.5 Sqmm PVC(FRLSZH) insulated copper earth continuity conductor connected to common earth dolly and including MS/GI sunken boxes with modular inner & surface plate suitable for housing modular switches, sockets,fan regulators etc for one light/fan/call bell point controlled by one 1- way switch complete all as specified and as directed by Engr -in -Charge.

Supply and fixing of Flameproof weatherproof LED Light fixture of 30 watt Cat No: PEC/LED/2003 Make Pluto Flameproof Control, complete all as specified and directed.

Supply and fixing of Flameproof weatherproof exhaust fan 300 mm sweep, 0.25 HP, single phase with louvers. Cat Pt: PFC/EF/2040 Make : Pluto Flameproof Control, complete all as specified and directed.

Supply and fixing of Flameproof weatherproof rotary switch On/Off switch 10/16 A with termination box, Cat Pt: PFC/RI/09 Make: Pluto Flameproof Control, complete all as specified and directed.

M&L wiring for circuit/ sub main wiring of 2x4 Sqmm + 1x4 Sqmm earth wire, alongwith eart wire PVC (FRLSZH) insulated copper conductor, single core, 1100 v grade cable including in concealed stove enamelled steel conduit complete all as directed by Engr -in- Charge.

Supply and fix MCB SP 6-32 Amps, AC, 240V, 50 Hz, C series complete all as specified and directed.

Supply and fix MCB SPN 6-32 Amps, AC, 240V, 50 Hz, C series complete all as specified and directed.

Supply and fix MCB DB SPN 4 way when MCBs to be used with glazed door, 240 volt, IP 43 protection with 100 amps rated bus bar complete all as directed.

Returning filling in trenches including spreading leveling watering and well ramming in layers not exceeding 25 cm all as directed.

Removing of surplus soil not exceeding 50 meter and depositing where directed at a level not exc 1.50 mtr above the starting point all as directed.

Supply, fix testing and commissioning of Pressure pump Model: CPBS62824-H, 0.7 HP, B-Class insulation ,1 Phase, 50 Hz, 220 V, 6.5 A, 2700 RPM, Head: 35-10.5 m, Discharge range: 15-87 LPM, Make: Kirlosker Brothers including necessary electrical connection and all plumbing fitting as per site requirement. complete all as per specified and directed by Engr-in- Charge

Supply and laying Double walled corruyated (DWC) Duct (Dura- Guard) as per IS-14930 Part - II for LT UG cable protection including coupler, elbows, T- Joint, Bends, etc and test report Make :- Dura- line/Gemini/Rex. of size 38 mm inner dia

S&F ceilling fan BLDC 1200 mm sweep operated on 230/240V AC,26 W Single phase electric supply ,5 star with remote in white in colour complete including connecting with 3 core stranded copper conductor cable cordas as per manufacture recommendation from ceiling rose to fan connector including writing MES No. on ceiling fan white synthetic enamelled paint complete all as per specified and directed by Engr-in- Charge . Make Havelles cat pt- Efficienia Neo BLDC or equivalent in Orient n & crompton

Supply, install, testing & commissioning hi wall split unit indoor/outdoor complete with cordless remote control unit and inverter type Inverter type air conditioner electric driven, single phase of capacity 1.5 TR, 5 star as specified and as directed by engineer-in-charge.Make Voltas, LLoyd, Blustar, carrier.

Core cutting for making holes for inter connection of outdoor to indoor unit from stone/ brick masonry complete all as specified and as directed by Engr-in-charge.

Supply and fixing copper tubing with insulation for extension of connection from outdoor to indoor complete all as specified and as directed by Engineer -in-charge.

Supplying and fix in repair sheet metal enclousers with socket, plug top and MCBs, single pole and neutral enclouser with a two pin and earth plug and socket complete with one single pole MCB , single pole, 240 V of capacity 20 amps , complete all as specified and as directed by Engr-in-Charge.

M&L wiring for circuit/ sub main wiring 2x4.0 Sqmm+1x4 Sqmm earth wire of PVC (FRLS) insulated copper conductor, single core, 1100 v grade cable in PVC conduit/cassing Capping as required in steel condute complete all as specified and directed by Engineer-In-charge

Supply, install, testing & commissioning bottle cooler / Visi cooler 375 liters capacity, refrigerator freezer at bottom, adjustable shelves plastic self type single phase, inverter type, air conditioning electric driven, single phase of capacity, 5 star rating as specified and as direced by engineer-in-charge. model no- SC375F of Blue Star or equivalent in Voltas, Hitachi, Carrier

Supply, Installation, Testing and commissioning of LED Highbay 120Watt with 110lm/ watt with a nominal system output of 12000 lumen and a minimum system efficacy of 110 lm/W. The luminaire shall have a rated system lifetime of 50000 burning hours at L70. the lminaire should have a colour temprature of 5700K The luminaire housing should mad eof High Pressure die cast Aluminium with loop in loop out, lense on each LED. LED used should be high power LED placed on ceramic base chip. Driver should be potted.The total power consumption should not exceeds 120W (Including driver) Make Crompton Cat.Part.No.TFS-504-120-57-60D-HL2-LM-NSG " or equivalent in Philips, HAVELLS. Complete all as specified and as directed by Engr-In-Charge

M&L for cross arms, bracings, supports, clamps and back plates fabricated from strucural steel sections suitable for fixing of LED Flood lights including clamp nuts, bolts, washers,welding, bending cold or hot, drilling holes for bolts, in any shape or size as indicated, with & inclusive of one coat red oxide primer & one under coat and one finishing coat of synthetic enamel paint after preperation of surfaces all as specified, as directed by engg in charge.

Supply and fix PVC insulated and FRLSH PVC round sheathed, cpper conductor (fiexible) industrial cable, 1100 volt, conforming to IS:694 of size 3 core and 1.5 sq mm with saddle inside flexible conduit complete all as specified and as directed.

M & L for Point wiring with 1.5 Sqmm (nominal area) PVC( FRLSH) insulated sheathed copper stranded conductor cable run in and including concealed in wall/floor PVC conduit not less than 20 mm medium grade as per IS with all fittings such as bends, tee,junction boxes,etc of suitable size including 1.5 Sqmm PVC(FRLSH) insulated copper earth continuity conductor connected to common earth dolly and including MS/GI sunken boxes with modular inner & surface plate suitable for housing modular switches, sockets,fan regulators etc for one indepenedet soket point controlled by one 1- way switch complete all as specified and as directed by Engr -in -Charge. Note:- Cutting & making good of chasis in the wall/Roof/Floor is deemed to be inclued in the quoted rates.

M & L for Point wiring with 2.5 Sqmm (nominal area) PVC( FRLSH) insulated sheathed copper stranded conductor cable run in and including concealed in wall/floor PVC conduit not less than 20 mm medium grade as per IS with all fittings such as bends, tee,junction boxes,etc of suitable size including 1.5 Sqmm PVC(FRLSH) insulated copper earth continuity conductor connected to common earth dolly and including MS/GI sunken boxes with modular inner & surface plate suitable for housing modular switches, sockets,fan regulators etc Note:- Cutting & making good of chasis in the wall/Roof/Floor is deemed to be inclued in the quoted rates.

Supplying and fixing Modular switch , one way, 16 amps, one Module of Make:- Ancher Roma/Legrand/ Crabetree.

Supplying and fixing Modular socket 16 amps-6 pin multipin, 2 Module of Make:- Ancher Roma/Legrand/ Crabetree.

Modular switch one way 6 Amp,1 Module , Make Legrand / Anchor Roma/Crabetree .

Supplying and fixing Modular socket, 6 amps-2/3 pin combined, 2 Module, Make Legrand / Anchor Roma/Crabetree .

Supply ,assembly & erection of Industrial chimney heavy duty of 900 m3/hr suction power made of GI sheet of thickness 1 mm for chimney pipe, including exhaust fan 3 phase , 3 HP 450 mm turbo,BLDC type with touch sensor operating on 230 V , 50 Hz Make: Crompton all accessories such as corner cleat,carriage bolt , appropriate sealant on longitudinal joints,necesssary control dampers and grill embedded in PGI duct etc complete of size 24 gauge including duly supended to ceiling /wall with the help of suitable size MS supports,nut,bolts& washer,anchor fastner, or angle iron as reqd at site , etc. , ,complete all as specified and directed by Engineer-In-Charge

Supply ,install testing commissioning of SS Hood to facilitate the airflow of chimney 0.8 mm thick steel , ,complete all as specified and directed by Engineer-In-Charge

Supply ,install testing commissioning of BOAR 3 HP capacity ,complete all as specified and directed by Engineer-In-Charge

Supply ,install testing commissioning of SS grill for fresh Air ,complete all as specified and directed by Engineer-In-Charge

Supply ,install testing commissioning of Fan 18 " size for fresh Air ,complete all as specified and directed by Engineer-In-Charge

Supply ,install,testing & commissioning of site pre fabricated GI sheet metal ducting with RTV sealent ,gasket complete with C & SS rectangular /square duct ducting of size 400 mm x 400 mm with made out of square/rectangular cross section and required curve shaped as per site requirement hollow profile duly factory fabricated box including all accessories such as corner ,cleat,carriage bolt ,Rubber gasket & appropriate sealant on longitudinal joints,necesssary grill embedded in PGI duct etc complete of size 24 gauge including duly supended to ceiling /wall with the help of suitable size MS supports,nut,bolts& washer,anchor fastner , etc.,complete all as specified and directed