CC Drain With Slab

Page No-1 Item No- 2/a. Earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75 m. as directed. The item includes necessary trimming the sides of trenches, levelling, dressing and ramming the bottom, bailing out water as required complete.

Laying 150 mm to 200 mm boulder soling including rough dressing hand packing and ramming down small pieces in the interstics without rolling and preparing the bed to proper level and filling up all joints with sandy clay or earth. [Page 229, Sl. No.12]

(II) Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement,if any, in ground floor as per relevant IS codes. River bazree. [Page 24, Sl No. 4 (b)]

Page No-42 Item No-36(a). Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor).

Page No-28 Item No-15-a-(ii), Reinforcement for R.C. works in all sorts of structures including distribution bars,stirrups,binders etc. initial straightening and removal of loose rust (if necessary), cutting to requisite length,hooking and bending to correct shape,placing in proper position and binding with 16 guage black annealed wire at every intersection complete as per drawing & direction. (Rate Analysis attached)

Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface], 15mm thick with CM (1:4), [Page No 189, Sl No. 1(ii)b.m surface @ 4 Kg/10 m2 i) By manual means.

Neat cement punning about 1.5mm thick in wall, dado, window sill, floor etc. NOTE:Cement 0.152 cu.m per100 sq.m. [Page 192,Sl. No. 15]

Providing & fixing Sign Board with two legged iron angle height 2.0m. and iron sheet of size 900 x 750 complete including painting two coats on both faces lettering sign marks etc. as per direction of the Engineer-in-Charge. (The rate is inclusive of cost of angle, concrete, iron sheet etc. complete.)

SGST @ 9.0 %

CGST @ 9.0 %