SPECIAL REPAIR TO TOILET BLDG NO P-184 AND P-185 AT RATNUCHAK UNDER GE KALUCHAK

Amount

B&R PORTION:- Taking down chowkhats or frames (without taking down shutters from the frame) not exceeding 1.5 square meter each and removing from site complete all as specified.

Taking down chowkhats or frames (without taking off shutters from the frame) exceeding 1.5 square meter but not exceeding 4 square meter each and removing from site complete all as specified. Note for item No-01 & 02:-The distrubed surface during taking down shall be made good by the contractor without any extra cost for fixing new one of any description. No extra cost is permissble for the material and labur for making good the disturbed surface).

Demolition of cement concrete of any description at any floor including sunken floor not other wise described complete all as specified and directed.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for)and removing unserviceable material outside cantt area, complete all as specified and directed.

Demolition of brick or stone masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlars facings, dressed stone work, complete all as specified and directed.

Taking up or down 15 mm bore steel tubing and connections including cleaning, threading for refixing or removal to store, complete all as specified and directed.

Taking up or down 25 mm bore steel tubing and connections including cleaning, threading for refixing or removal to store, complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing), removing serviceable tile to store and rubbish off the premises, complete all as specified and directed.

PCC 1:2:4, nominal mix, type B-0, using 12.5mm graded crushed stone aggregate as in lintels upto 1.5m clear span, cills, steps, seismic and other similar bands, plinth courses, coping, bed plates and the like including weathering, slightly rounded or chamfered angles and throating including necessary form work, complete all as specified.

Brick work using sub class B bricks in half brick thick walls straight or curved on plan to any radius built in CM 1 : 4, complete all as specified and directed.

Solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specification & drawing, complete all as specified and directed.

Factory made solid PVC moulded door shutter 28 to 30mm thick (style) with particle board core & with 2,4 or raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in the frame at site as per specification in SSR Part-I.

Aluminum anodized barrel tower bolt of extruded section and fixed complete of Size 200 mm long complete all as specified.

Aluminium alloy anodised sliding door bolt, 250 mm, plate type, stove enameled black, with bright bolt not less than 12 mm dia, with and including a minimum of 6 bolts and nuts four on bolt plate and two on staple plate and fixed complete all as specified.

Extruded aluminium alloy handles fabricated type, anodised 150 mm long, complete all as specified and directed.

Non skid coloured glazed ceramic tiles of any shade and any pattern of size (Pattern consists combination of two or more tiles ) 300 x 300 x 7 to 9 mm thick, as in floors etc laid over & including 15mm thick screed bed in CM 1:4 as in floors etc. jointed in neat cement slurry and pointed in colored cement to match coloured tiles, complete all as specified. Note:-(i)The colour,shade and pattern shall be approved by the GE during execution work. (ii) No extra cost is allowed for removing and re-fixing and necessary cutting of door etc if any required duriing execution of work)

Description all as per item No-16 above but colored glazed ceramic tiles in vertical surfaces 450 x 350 x 7 mm thick fixed over 10mm thick backing coat in CM 1:4, set and jointed in neat cement slurry and pointed in white or colored cement to match the shade of tiles, complete all as specified.

Cutting chases, pinning through brick wall in making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth, complete all as specified and directed.

15 mm bore steel tubing, medium grade, galvanished with all fittings like socket, union, elbow, bend, tees etc and fixed complete to wall and ceiling or laid in floors complete all as specified and directed.

Description all as per item No-19 above but except tubes of 15 mm bore.

25 mm bore steel tubing, medium grade, galvanished with all fittings like socket, union, elbow, bend, tees etc and fixed complete to wall and ceiling or laid in floors complete all as specified and directed.

Description all as per item No-21 above but except tubes of 25 mm bore.

Angle cock fancy type chromium plated with capstan head, screwed down, high pressure screwed both ends for 15 mm bore iron pipe or for unions and fixed in repairs complete, all as specified and directed.

Stop cock chromium plated fancy type with long shank and cup with capstan head, screwed down, high pressure screwed both ends for 15 mm bore iron pipe or for unions and fixed in repairs complete, all as specified and directed.

Stop valves, cast copper alloy, chromium plated ,with long shank and cup (concealed type) fancy type screwed down, high pressure, with crown head, screwed both ends for 15 mm dia bore iron pipe or for unions and fixed in repairs complete, all as specified.

Bib tap 15mm chromium plated fancy type cast cooper alloy with crutch or butter fly handle, screwed down for iron pipe and fixed in repairs complete, all as specified.

Vitreous china bowl urinal flat back, size 465x355x265mm (minimum) with grading complete including providing and fixing plug, bedding urinal against wall in CM 1:2, securing urinal to plugs pointing around urinal back in cement, fixing automatic flushing cistern with brackets,PVC waste pipe, grating and union for discharge pipe (exclusive of supply of flushing cistern, trap and flush pipe), fixed in repairs complete all as specified.

Vitreous china Orissa pan of pattern white, long pan size 580x440mm , with ‘P’ or ‘S’ trap, front or back inlet and integral foot rest complete including lime concrete bedding and connection to drain or outgoing pipe and to flushing pipe, and anti siphon pipe, fixed in repairs complete all as specified.

Vitreous china wash hand basin, white , flat back, size 580 x 450 mm with brackets, including cutting for and pinning in ends of brackets or erecting stand and 32 mm waste coupling and waste pipe 75 mm long, fixed in repairs complete all as specified.

PVC flushing cistern low level 10 ltr capacity with inlet ball valve, float valve and handle including brackets and pipe connecting to WC etc including all fittings including dismantling old flushing cistern any type, complete all as specified.

PVC connection 45 cm long fitted with PTMT nut and washer on both ends, fixed to 15 mm bore iron pipes, complete all as specified.

15mm dia CP pillar tap, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot or Cold' with long screwed shanks and fly-nuts, screwed for iron pipe fixed in repais, complete all as specified and directed.

Brass chromium plated shower rose, fancy type,125mm with swivel joints including fixing to steel pipe or union fixed in repair, complete all as specified and directed.

Chromium plated steel grating 100mm dia, ixed in repair, complete all as specified.

PVC (SWR) floor trap , plain including jointing with solvent cement 75mm bore fixed in repairs, complete all as specified.

PVC (SWR) multi floor trap including jointing with solvent cement 75mm bore fixed in repairs, complete all as specified.

PVC (SWR) pipes 150mm single socketed , in any length with rubber ring joints ,fixed to walls /floor complete including dismantling existing pipes of any description all as specified and directed.

PVC (SWR) pipes 110mm single socketed , in any length with rubber ring joints ,fixed to walls /floor complete including dismantling existing pipes of any description all as specified and directed.

PVC (SWR) pipes 75mm single socketed, in any length with rubber ring joints fixed to walls /floor complete including dismantling existing pipes of any description all as specified and directed.

PVC (SWR) bends with oval access door 110mm fixed in repairs complete all as specified and directed.

PVC (SWR) bends with oval access door75mm fixed in repairs complete all as specified and directed.

PVC (SWR) vent cowl 110mm fixed in repairs complete all as specified and directed.

PVC (SWR) branch piece (single Y) equal or unequal with oval access door 110mm fixed in repairs complete all as specified and directed.

PVC (SWR) branch piece (double Y) equal or unequal with oval access door 110mm fixed in repairs complete all as specified and directed.

Box type steel windows comprised of tubular frame and shutters made out of 1.25 mm thick MS sheet tube factory made with double side shutters wire gauged shutter & glass glazed shutter (wire cloth and glass panes will be measured and paid seperately) with side hung shutters with MS handles and MS peg stay dovetailed or welded incl 02 Nos, MS Tower bolts 150 mm long for each leaf and 10 mm square bar grill / guard bars at spacing as shown on Drg welded to MS flat iron frame work, including other fittings, hinges, MS handles, tarred hold fasts ,PCC blocks for hold fasts etc all as shown on Drg No CEPZ/TD -354/09 sheet 1/3 to 3/3 including one coat of of red oxide zinc primer, complete all as specified and directed by Engr-in-charge. Note:- Guard bar shall be measured & paid seperatly.

Framed work such as grills grating etc with end bars shouldered riveted or forged into spikes ,and similar work conforming to grade Fe 290 gde E -165, complete all as specified.

20 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in 15 mm thick backing coat in cement mortar (1 : 4) including pointing, mouldging the edges in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, complete all as specified

Complete removal of the existing sunken treatment including roughing and prepration surfaces of old concrete floor by picking, scurubbing down with steel brushes, sweeping clean and washing down with water to remove dust etc.and applying the following treatment complete all as specified:- (a) 15 thick rendering on fair faces of brick work or cement surfaces in cm 1:4 mixed with water proofing admixture by weight of cement to sunken portion including wall of sunken portion with proper slope towards outside and finishing cement concrete or brick work surface even and smooth using extra cement finishing concrete complete all as specified. ( NOTE :- W P admixture shall be measured and paid separately). (b)Applying Ist course of bitumenous primer @ 0.4 ltr / sqm conforming to IS-3384 over plastered surface. (c)Applying 2nd course of a coat of bonding material with blown type bitumen of grade 85/25 heating to working temperature and applied @ 1.2 kg/sqm. .contd to item No-49.01

(d) Applying 3rd course of APP (Atactic Polypropylene) modified polymeric 3mm thick weight not less than 3.6 kg/sqm with 160 grams/sqm non woven polyster made at center core reinforced laid with 75 mm side overlap and 100 mm overlap. The membrane has to be laid with LPG torch and overlap sealed and finished neat . (e)Applying 4th course of a coat of bonding material with blown type bitumen of grade 85/25 heating to a working temperature and applied @ 1.2 kg/sqm .

PCC (1:7:12) type F2 using 40 mm graded stone aggregate as in filling and mass concrete complete all as specified & directed.

Rendering 15mm thick in CM (1:3) on fair faces of brick/concrete surfaces of sunken floors, including taking down existing plaster and mixing of water proofing compound, finished even and fair complete, all as directed and specified. Note: WPC will be measured and paid separately.

Cutting/drilling hole in brick wall/RCC beam by mechanical mean exc 300mm deep in slab of WC/ Bath including fixing 40mm dia 45mm long GI Spouts pipe all as directed by Engr in Charge.

Steel ventilator with top hung shutter including hinges, steel peg stay, lugs as in hold fast with locking arrangements, complete all as specified and directed.

PCC 1:2:4 type B-0 using 12.5 mm stone aggregate of avg 25 mm thick make to slope in sunken floors, complete all as directed

Soap dish fixed with and including chromium plated brass screws and wooden / plastic cleats complete all as specified and directed.

Cromium plated, single towel rail 600mm long fixed in repairs, complete all as specified. Make:- Jaquar, Cat No:- ACN-1111BNM or equivalent cat part of make as specified in Appx-"F" of CA.

Complete removal of existing roof treatment of any description viz. tarfelt or membrane surface or roof tiles etc. including grubbing up of tree roots and removing all the debris to a distance n.exc 100m and preparation of concrete surfaces by scrubbing down with steel brushes and cleaning with water to remove all loose dirt / dust etc and applying the following roof treatment complete all as directed:- (a) Applying Ist course of 15 mm thick cement screed in CM 1:4 over concrete surface mixed with water proofing admixture by weight of cement as per manufacturer's instruction complete all as specified. ( NOTE :- W P admixture shall be measured and paid separately). (b) Applying 2nd course of bituminious primer confirming to IS-3384 @ 0.4 lit/sqm over the screed bed. (c) Applying 3rd course of a coat of binding material with blown type bitumen of grade 85/25 heating to working temperature of 180 0 C and applied @ 1.2 kg/sqm. .....contd to item No-57.01

(d) Applying 4th course of APP (Atactic polypropylene) based polymeric membrane minimum weighing 3.6 kg/sqm and minimum 3 mm thick reinforced with polyster non wove fabric (wt not less than 150 gms/sqm) laid with 75 mm side overlap and 100 mm overlap by forced / torch application as per manufactures instructions. (e) Applying 5th course of a coat of bonding material with blown type bitumen of grade 85/25 heating to working temperature of 180 degree C and applied @ 1.2 kg/sqm over APP membrane, complete all as specified and directed.

PCC 1:2:4 type B-0 using (12.5 mm graded crushed stone aggregates ) in any thickness as in padding on roof slab for levelling the surface of roof slab finished fair and even, complete all as specified and directed.

Rotational moulded polyethylene water tank (cylindrical vertical closed top) hoisted and fixed in position capacity of tank 2000 ltrs including dismantling of existing tank of any description with & including 25 mm ball PTMT Ball valve high pressure with exposy coated aluminum rod and high density plastic ball screwed for iron pipe, complete all as specified.

Gun-metal globe or gate valves with iron handle quarter tun type, screwed both ends for iron pipe or for unions of 25mm dia bore and fixed in repairs, complete all as specified.

Brickwork with sub class ‘B’ bricks, straight or curved on plan exc 6m mean radius built in CM 1:6, complete all as specified.

Cleaning the surface of RCC chajja with wire brushes, washing down with water, taking out cement plaster of any thickness including scrubbing down loose portion complete of height upto to 7.50 mtrs of roof chajja / fins, external surfaces of chajja portion including necessory scaffolding / formwork if required & applying dubbing coat of plaster of epoxy concrete of required thickness and plastering 10mm thick in CM 1:4 and applying two coats of acrylic cementenious brush applied water proof coating with dry film total thickness of approximate 1mm thick as in patches (Make- Dr Fixit Pidilite 2K or equivalent product of M/S Chemistek, M/s Prime etc) all as per manufacturer's instruction, complete all as specified and directed.

Taking down cement plaster of any description on brick or stone walls or from concrete surface including raking out joints, hacking for key, scrubbing down with water etc, and removing unserviceable material outside cantt area, complete all as specified and directed.

15 mm thick rendering in CM 1:6 on other than fair faces of brick work & finished the surfaces even and smooth without using extra cement complete all as specified and directed.

Rendering 5 mm thick in CM (1:3) on ceiling surfaces even and smooth without using extra cement complete all as specified and directed.

15 mm thick rendering on fair faces of brick work or concrete surfaces of walls etc in CM 1:4 including mixing of water proofing compound as per manufacturers instructions & finished the surfaces even and smooth without using extra cement, complete all as specified and directed. Note : WPC shall be measured and paid separatly.

Supply only WPC (Water Proofing Compound ) complete all as specified and directed . Makes:-SIKA/FOSROC/CHOKSEY

PCC 1:2:4, nominal mix, type B-1, using 20mm graded crushed stone aggregate as in lintels upto 1.5m clear span, cills, steps, seismic and other similar bands, plinth courses, coping, bed plates and the like including weathering, slightly rounded or chamfered angles and throating including necessary form work, complete all as specified.

75 mm thick, plain cement concrete 1:3:6, type C-2 (using 40mm graded crushed stone aggregate) as in plinth protection etc, finishing surface even and fair including making joints with bitumastic filling in proportion of bitumen and sand 1:3 by weight complete as specified and directed. (Note : The concrete shall be laid at a stretch n.exc 3.0 m in length and every turning. corners.

Applying three coats of white wash including preparation of newly plastered wall surfaces, complete all as specified.

Preparation of old plastered surfaces and applying two coats of white wash on wall surfaces, complete all as specified.

Preparing newly plastered ceiling surface and applying three coats of white wash, complete all as specified.

Preparing old ceiling surfaces and applying two coats of white wash, complete all as specified

Preparation of new plastered surfaces and applying two coat of cement base paint over one coat of approved primer, complete all as specified.

Preparation of old trated surfaces of walls and applying two coats of cement base paint, complete all as specified.

Preparation of new plastered surfaces of walls and applying two coats of weather proof paint paint, complete all as specified.

Preparation of old treated surfaces of walls and applying two coats of weather proof paint paint, complete all as specified.

Applying two coats of synthetic enamelled paint over a coat of red oxide on steel surface or iron based materials of any description, not other wise described over 10 cm width or girth including preparation of new surfaces, complete all as specified.

3mm thick sheet glass, ordinary quality and glazing with oil putty in squares not exceeding 0.5 Sqm in each pane, complete all as specified.

Galvanised mild steel wire cloth 0.56 mm nominal dia of wire cloth and average width of aperture 1.18 mm, complete all as specified.

Applying one coat of synthetic enamelled paint on wood & wood based materials of any description, not other wise described over 10 cm width or girth including preparation of old surfaces, complete all as specified.

Applying one coats of synthetic enamelled paint on steel or iron surface based materials of any description , not other wise described over 10 cm width or girth including preparation of old surfaces, complete all as specified.

E&M PORTION:- Taking down carefully unsv aluminium / copper conductor point wiring (light, fan, light socket, power socket) complete fitting such as swithes, sockets, lamp holder, utility light fitting, fan regulator etc and removing materials from sites and making good distrubed surface of walls and roofs complete all as specified and as directed.

Point wiring with 1.5 Sqmm single core multi stranded copper conductor FRLS insulated and unsheathed heavy duty cable in colour code including contineous earth wire with cable of size 1.5 sqmm copper conductor flexible FRLS insulated drawn in and including concealed PVC rigid conduit medium grade ISI marked terminated into CI/pressed steel terminal boxes including 3.00mm thick hylam brand IS-2036 marked, laminated sheet cover for mounting switches, sockets, fan regulators etc for one light/fan/bell point controlled by one, one way switch including cutting chases and making good to disturbed surfaces of wall / ceiling / floor including treating with existing finishes, complete all as specified and as directed.

Description all as per srl item No 84 above but for one 3 pin socket outlet 15 Amp independent with cable of size 2.5 Sqmm for main wiring and 2.5 sqmm as in continuous earth wire.

Switch socket multipurpose combination 2 in 1, 3 pin, 5 and 15 Amp flush type universal,complete all as specifed.

Switch piano flush type 6 Amp single pole two way, (ISI marked), complete all as specified.

Ceiling rose (ISI Marked) 3 Phase PVC/poly carbonate, insulated body, compete all as specified.

Tube light fitting box type suitable for LED 18-20W tube Rod with end cap made out of CRCA sheet powder coated complete with hosing with all accessories pre wired and making connection with three core copper flexible cable of size 23/0.0076 from ceiling rose to PVC connection to light fitting including 18-20LED tube rod 4 feet long complete all as specified and directed. Make:-Crompton Cat Part No:-LTT8-20 for LED tube rod & DMLN1LT8-16 for fittings or Equivalent cat part of make as specified in Appx 'F' here in after. Note :- The LED batten and LED tube rod shall be of same make.

Lamp holder PVC/Polycarbonate type with back plate suitable for batten fittings, complete all as specified and directed.

Inverter LED 9 watts, 230 volts AC 50 Hz 900 lumens with 4 hours backup, complete all as specified.

Taking down carefully sub main wiring of any type and making good distrubed surface of walls and roofs to match the existing surface, complete all as specified and as directed.

Sub main wiring with single core cable 2x 4 sq mm FRLS insulated unsheathed stranded copper conductor cable 1100 Volts grade including 20mm rigid PVC conduit (Concealed) medium grade alongwith 1x 2.5 Sq mm FRLS insulated unsheathed copper conductor cable as earth wire connected with main earth dolly including chesing, cutting & making good to match with the existing surface, complete all as specified and directed. Note:-2 wire of 4sqmm, 1 wire of 2.5qmm and one run of pvc conduit shall be measured as one unit.

Vertical distribution board TPN IP 43-'IK 09 with bus bars neutral links blanking plates double door with 250Amps rated bus bar suitable for FP MCCB as incommer and out going SP/TP MCBs 04 ways, complete all as specified and directed. Make:-Schneider Cat part No :-A9HVD04L or equivalent cat part of make as specified in Appx "F" here in after. Note:- MCCBs and DBs shall be of same make.

MCCB 415 volts 4 Pole, rating 100 Amps,having short ckt and over load protection, breaking capacity 25 KA , complete all as specified. Make: Schneider Cat Part No-LV429560 or Equivalent cat part of make as specified in Appx 'F' here in after.

Sheet metal enclosure factory made (Double door) for DBs, single pole and neutral, 240 volts, 12 way with 200Amps rated bus bar fixed on walls, including connecting both incoming and outgoing cable termination with proper taping, lagging testing and commissioning complete all as specified. Make:-Schneider Cat part No :-A9HSND12 or equivalent cat part of make as specified in Appx "F" here in after.

Sheet metal enclosure factory made (Double door) for DBs, single pole and neutral, 240 volts, 8 way with 200Amps rated bus bar fixed on walls, including connecting both incoming and outgoing cable termination with proper taping, lagging testing and commissioning complete all as specified. Make:-Schneider Cat part No :-9HSND08 or equivalent cat part of make as specified in Appx "F" here in after.

MCB single pole and neutral 40 to 63 amps 240 volts 10 KA 'C' series all as specified. Make:- Schneider cat part No-A9N2P40C to A9N2P63C or Equivalent cat part of make as specified in Appx 'F' here in after.

MCB single pole and neutral 6 to 32 amps 240 volts 10 KA 'C' series all as specified. Make:- Schneider cat part No-A9N2P06C to A9N2P32C or Equivalent cat part of make as specified in Appx 'F' here in after.

MCB single pole 6-32amps 240 volts 10 KA 'C' series all as specified. Make:- Schneider Cat Part No A9N1P06C-A9N1P32C or Equivalent cat part of make as specified in Appx 'F' here in after.

Earthing complete with galvanised mild steel earth plate electrode of size 600x600x6mm thick burried directly in ground earth (in vertical) earth pit not less than 2.25 mtr deep below normal ground level with top edge of the earth plate not less than 1.5 mtr below ground level connected to galvanised iron or earth lead wire 4mm dia (8 SWG) by means of nut, bolt, check nuts and washer of galvanised ironincluding PCC pit in PCC 1:2:4 type B-1 pre-cast RCC cover slab using reinfocement with XPM weighing not less than 1.87 kg/Sqm with suitable handle made of 12mm round bar, including necessary excavation and earth work in any type of soil, 20mm dia medium grade galvanised steel tube for watering with one end fixed with cast iron funnel and wire mesh, 15mm dia bore light grade galvanised steel tubing upto 7.5 m length for drawing earth lead wire protection pipe, common salt, charcoal, etc complete all as shown in electrical plate No 3 of SSR Part-I and testing on completion. Note:- Rate for earth lead wire & protection pipe upto 7.5mtr length are inclussive in this item & no extra payment shall be admissible for the same.

Supply and laying or fixing or passing through pipe 1100 volts grade heavy duty electric cable with XLPE insulated screened PVC bedded aluminium stranded conductor served with inner sheathing of PVC tape armoured with galvanised steel wire or tape and over all PVC sheathed of size 35 Sqmm x 3.5 core, complete all as specified.

Excavation in trenches in any type of soil not exceeding 1.5m wide and n.exc 1.5 mtr in depth for laying of under ground electric cable and getting out complete all as specified.

Returning filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25cm thick in any type of soil complete all as specified.

Removing excavated surplus materials to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point, complete all as specified.

Dry river sand cushioning to UG cable 8 cm thick before laying and 15cm thick after laying complete all as specified and directed. Note:- 1.Dry fine sand of best available quality shall be used. 2.Punned thickness shall be made and paid.

GI pipe light grade 40 mm bore for cable protection fixed on poles or laid in trenches, under floor, ducts, road crossing etc with fixing clamps, nuts bolts, washer of requrered size if required, complete all as specified.

Supply and laying sub class `B` bricks laid dry flat transversely along the length of cable with width equal to the length of bricks over sand cushioning as protection cover of cable laid, complete all as specified and directed.

NARESH KUMAR AND COMPANY

Pyramid constructions

Anand Prakash

M/S GVSR ENTERPRISES

M/S ARUN ANAND

AKSHAY CONSTRUCTION COMPANY