SPECIAL REPAIR FOR REPLACEMENT OF OLD EQUIPMENT/MACHINERY OF WATER SUPPLY AGAINST BER ITEMS AT AF STN PUNE UNDER GE (AF) LOHEGAON

Amount

Supply install testing and commissioning centrifugal pump set , electric drivern including suitable size of electric motor 3 phase, 415 V (+10 or -10) Horizontal split casing, discharge 47.5 lps split case pump set Head 70 meter including suitable soft starter, PCC foundation, pressure guage complete all as specified and directed by Engr-in-Charge.

Supply install testing of Non clog vertical submersible pumps with chrome steel impeller and cutter, non-clog to pass up to 40 mm size particles including guide rail and lifting chain,starter etc. complete Head 25 m, discharge 400 LPM complete all as specified and directed by Engr-in-Charge.

Supply install testing and commissioning openwell submercible pump set , electric drivern , 3 phase, 415 V (+10 or -10),head 12 meter discharge 276 LPM of including PCC foundation and starter cable from starter to pump complete all as specified and directed by Engr-in-Charge.

Supply install testing and commissioning openwell submercible pump set , electric drivern , 3 phase, 415 V (+10 or -10), discharge 55 LPM, 12m head including including PCC foundation and starter cable from starter to pump complete all as specified and directed by Engr-in-Charge.

Supply install testing and commissioning centrifugal pump set , electric drivern including suitable size of electric motor 3 phase, 415 V (+10 or -10), 50m head Horizontal split casing, discharge 44.4 lps split case pump set including PCC foundation,pressure guage complete all as specified and directed by Engr-in-Charge.

Supply install testing and commissioning centrifugal pump set , electric drivern including suitable size of electric motor 3 phase, 415 V 60-70 m head Horizontal split casing, discharge 47.5 lps split case pump including PCC and pressure guage complete all as specified and directed by Engr-in-Charge.

Supply install testing and commissioning Monoblock pump set , electric drivern including suitable size of electric motor 3 phase, 415 V ,30 m head, discharge 20 lps pumpset including suitable starter complete all as specified and directed by Engr-in-Charge.

Supply install testing and commissioning vacuum pump set , electric drivern , 3 phase, 415 V (+10 or -10), with all accesories type DV-40-80 Cu Mtr/ hr capacity RPM 1450 of 5 HP capacity including starter and PCC foundation complete all as specified and directed by Engr-in-Charge.

Supply and installation of silent Diesel Engine driven generating set 415 volts, 3 phase 4 wire, engine as per relavent IS and Alternator as per relavent IS complete with relay panel and control panel having meter and sound proof canopy as per CPCB norms and foundation etc of capacity 200 KVA with following specification complete all as specified and directed by Engr-in-Charge. Engine - Deisel Engine 4/6 Cylinder 1500RPM ,water cooled developing 243 BHP suitable for continious running along with standard accessories along with first filling of lubcrating oil and coolant. Alternator - 200KVA/160 KW,415V,50 HZ,0.8 PF three phase cycle/Sec 1500 RPM self excited self regulated screen protected drip proof alternator in accordance with BS : 2613. attery EXIDE make,In built fuel tank of suitable capacity upto 8hrs running, Exhaust Silencer without piping, Along with standard Control panel and SMPS Battery Charger.. Notes - (a) First filling of deisel for load testing shall be contractors responsibility and arrangment for load testing by IEM will be made by contractor without any any extra cost. First servicing of the DG Set including material will be carried out by contractor at no extra cost. (b) Foundation of DG set should be 60 cm above from ground level and same is included in item rate quoted by contractor

Taking out unserviceable foot valve 200 mm dia from the UG sump and S & F new foot valve 200 mm dia ball type incl rubber gasket, bolts, Nuts complete all as specified and directed by Engr-in-Charge.

Taking out unserviceable foot valve 150 mm dia from the UG sump and S & F new foot valve 150 mm dia ball type incl rubber gasket, bolts, Nuts complete all as specified and directed by Engr-in-Charge.

Taking out unserviceable foot valve 100 mm dia from the UG sump and S & F new foot valve 100 mm dia ball type incl rubber gasket, bolts, Nuts complete all as specified and directed by Engr-in-Charge.

Supply and fix Valve, butterfly conforming to IS 13095,200 mm (8”) dia complete all as specified and directed by Engr-in-Charge.

Supply and fix Valve, butterfly conforming to IS 13095,150 mm (6”) dia complete all as specified and directed by Engr-in-Charge.

Supply and fix Valve, butterfly conforming to IS 13095,100 mm (4”) dia complete all as specified and directed by Engr-in-Charge.

M & L bends (any type, radius and angle) tapers any type (straight bend, increasing, decreasing or double socked etc) tee pieces, single branch, junction, double branch, cross (all sockets or socket and spigot) collars, caps plugs suitable for the pipe upto 150 mm bore complete all as specified and directed by Engr-in-Charge.

Supply and lay M S Pipes heavy grade with all fittings laid in floors or fixed to walls and ceilings etc of sizes 150MM dia bore complete all as specified and directed by Engr-in-Charge.

Supply and lay M S Pipes heavy grade with all fittings laid in floors or fixed to walls and ceilings etc of sizes 100MM dia bore complete all as specified and directed by Engr-in-Charge.

M/L for providing earthing complete with GI plate electrode 600 mm x 600 mm x 6 mm thick buried directly in ground earth pit not less than 2.25 Mtr deep below ground level with top edge of the plate not less than 1.5 Mtr below normal ground level connected to GI earth strip 25x4 mm by means of bolts, nuts, checknuts & washers and connecting to earth dolly all as shown in electrical plate No. 3 of SSR Part I of 2009 & as specified or indicated and testing on completion including exaction/earth work in any type of strata PCC ( 1:3:6 ) type C1 earthing chamber, pre cast slab 50 mm thick in cement concrete ( 1: 2 : 4 ) type B 1 ( reinforced with welded steel wire fabric (XPM) weight not less than 4 Kg / Sqm), funnel with wire mesh, watering pipe of 20 mm bore medium grade and lugs, including GI earth strip 25 x 4 mm with GI protection pipe of 40 mm medium grade 7.5 meter long, etc complete all as specified and directed by Engr-in-Charge.

M/L for providing earthing complete with GI earth plate electrode 600 mm x 600 mm x 6 mm thick buried directly in ground earth pit not less than 2.25 Mtr deep below ground level with top edge of the plate not less than 1.5 Mtr below normal ground level connected to copper earth strip 32X6 mm by means of bolts, nuts, checknuts & washers and connecting to earth dolly all as shown in electrical plate No. 3 of SSR Part I of 2009.00 & & as specified or indicated and testing on completion including exaction/earth work in any type of strata PCC ( 1:3:6 ) type C1 earthing chamber, pre cast slab 50 mm thick in cement concrete ( 1: 2 : 4 ) type B1 (reinforced with welded steel wire fabric (XPM) weight not less than 4 Kg / Sqm), funnel with wire mesh, watering pipe of 20 mm bore medium grade and lugs, including GI earth strip 32 X 6 mm with GI protection pipe of 40 mm medium grade 7.5 meter long, etc complete all as specified and directed by Engr-in-Charge.

Supply laying jointing,testing and comissoning of XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, 4 core cross-sectional area 300sqmm complete all as specified and directed by Engr-in-Charge.

Supply laying jointing,testing and comissoning of PVC insulated,heavy duty electric cable with copper conductor, 1100 volts grade, Single core ,cross-sectional area 35sqmm complete all as specified and directed by Engr-in-Charge.

Supply laying jointing,testing and comissoning of PVC insulated, heavy duty electric cable with copper conductor, 1100 volts grade, Single core cross-sectional area 25sqmm complete all as specified and directed by Engr-in-Charge.

Supply laying jointing,testing and comissoning of XLPE insulated, Armoured heavy duty electric cable with copper conductor, 1100 volts grade, 3.5 core sectional area 50 Sqmm complete all as specified and directed by Engr-in-Charge.

Supply laying jointing,testing and comissoning of PVC insulated, heavy duty electric cable with copper conductor, 1100 volts grade, 3 core cross-sectional area 6 sqmm complete all as specified and directed by Engr-in-Charge.

Supply laying jointing,testing and comissoning of PVC insulated, heavy duty electric cable with copper conductor, 1100 volts grade, 3 core cross-sectional area 2.5 sqmm complete all as specified and directed by Engr-in-Charge.

Chaulya Enterprises

Star Electrical