Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹39.5 LAccepted-AOC KHAWASNIWAS NEAR POLICE QTRDEORALI GANGTOK SIKKIM | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹40.8 L+₹1.3 L (3.28%)Rejected-Finance | L2 | Rejected-Finance Higher bid value. | |
| 3 | L3₹41.0 L+₹1.4 L (3.66%)Rejected-Finance | L3 | Rejected-Finance Higher bid value. | |
| 4 | L4₹41.4 L+₹1.8 L (4.59%)Rejected-Finance | L4 | Rejected-Finance Higher bid value. | |
| 5 | L5₹42.0 L+₹2.4 L (6.16%)Rejected-Finance | L5 | Rejected-Finance Higher bid value. |
Tender Value
₹38.5 L
EMD Value
₹77,100
Closing Date
1 Oct 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Gangtok
GE Gangtok New Mil Stn Gangtok, Sikkim 737102
PROVN OF CERTAIN MINOR WORKS AT NEW MIL STN UNDER GE GANGTOK
2022_MES_542831_2
8070AE8
Open Tender
Miscellaneous Works
Works
182 days
GE Gangtok New Mil Stn Gangtok
As per tender documents
8 documents required · 8 mandatory
₹500
GE Gangtok
₹77,100
Yes
27 Oct 2022
10 Sept 2022
3 Oct 2022
11 Sept 2022
1 Oct 2022
14 Sept 2022
Amount
B/R Portion M&L for Excavating in post holes (or similar holes) each n exc 0.5 cu.m, getting out soft/loose soil, returning filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25cm complete all as specified and directed.
M&L PCC type D-2 1:4:8 using 40 mm graded stone aggregates on in foundation, filling and mass concrete complete all as specified and as directed.
S&F rolled section Fe 410W (Gde-E- 250) Quality A as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors: fixed with angle cleats or other connecting plates etc complete all as specified and directed.
Supply and fix 0.50mm thick pre-painted galvalume aluminium zinc coating GI based corrugated steel sheets (Trapezoidal profile) of any colour having tensile strength of 550 Mpa as in roof covering fixed with self tapping screws as in roof complete all as specified and directed.
M&L for pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550mpa as in roof covering fixed with self tapping screws complete all as specified and directed.
M&L non skid ceramic colured tiles 7 to 8mm thick, area of each tile exceeding 0.11 sqm but n.exc 0.36 sqm, in floors etc. set & jointed in neat cement slurry & pointd in coloured cement to match incl 15mm thick screed bed with CM 1:6 complete all as specified and as directed.
Ditto as per item No. 6 but on vertical surface such as dado/skirting/risers etc incl 15mm thck rendering in CM 1:6 complete all as specified and as directed.
M&L glazed ceramic coloured tiles 350x250x7mm/450x350x7mm thick on vertical surfaces such as skirting, dados, set & Jointed in neat cement slurry & pointed in colour cement to match incl 10mm thick screed bed with CM 1:4 complete all as specified and as directed.
M&L rendering 15mm thick in CM 1:6 on other than fair faces of brick or concrete surfaces complete all as specified and directed.
M&L for rendering 15 mm thick in CM (1:4) in two layers of 10mm and 5mm (outer layer CM should be added with WPC) on fair faces of brick or concrete surfaces, complete all as specified and directed.
Supply only liquid water proofing compound.
S&F framed work such as grills, gratings etc, with ends of bars, shoulded and/or riveted or forged in spikes, framed guard bars, walk ways, railings, frame work of water tanks and similar works conforming to Fe 290, Gde-E-165 complete all as specified and directed.
S&F Solid PVC door frame of size 50mm X 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube, supplying and fixing in opening as per specification and drawing complete all as specified and directed.
S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed.
S&F Steel ventilator with top hung shutter including hinges, steel peg stay, complete all as specified and as directed.
S&F 3mm thick, figured glass, pin head type and glazing with oil putty in square n.exc 0.5 sqm in each pane complete all as specified and directed.
S&F Steel windows box type with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded completed all as specified and as directed.
S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty in square n.exc .50 sqm in each panels complete all as specified and directed
S&F 100mm long butt hinges medium weight cold rolled MS complete all as specified and directed.
S&F 150 mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed.
S&F Aluminium handles, 150 mm size, cast type, anodised complete all as specified and directed.
S&F powder coated GI grid frame work for false ceiling comprising of the following sections for making partition of 600x600mm size fixed to walls with rawl plugs and screws and hanged to roof with and including 1.18 mm dia GI wire suspender of suitable length and buterfly clips, size of main tee shall be 23mmx 28mmx 0.30mm thick, cross tee shall be 24x 23x .30 mm thick and wall angle shall be 20mmx20mmx0.30mm thick complete all as specified and directed.
S&F for 4mm thick Non asbestos fibre cement building board (E-board) of approved texture for insulation and acoustic purpose of size 595x595 mm size fixed with staples on snap grid as in ceiling with and including dusting of surface and applying one coats of oil emulsion distemper over a coat of primer including preparation of surfaces complete all as specified and directed.
S&F Hand Shower (health faucet) alongwith 1m flexible tube complete all as directde. Make : For hand shower : JAQUAR Code- ALD-573 or equivalent approved product of MARC
S&F for Wall mixer with bend pipe for overhead shower with built in non return valve with all fittings etc complete all as specified. Make: Cera Cat No F2011402 or equvalent.
S&F vitreous china, white, flat back wash hand basin (Half Pedestal) of size 630x450mm mm of Ivory/Snow white including matching pedestal fixed with and including CP brackets (of suitable size) etc with complete fittings complete all as specified and directed. Make : CERA Cat No S2040104 Wash basin, S2090102 Half Pedestal or equivalent.
S & F CP basin mixer, single lever with 450mm braided connection pipe (without pop-up) complete (Make : Cera Cat No. F1012451or equivalent).
S&F 15mm bore dia two way bib taps long body cast copper alloy chromium plated, wall flange and aerator with all accessaries complete all as specified and as directed. Make : Cera cat No F2007162
S&F 15mm bore dia Stop cock/ concealed stop cock cast copper fancy type chromium plated alloy screwed down high pressure with crutch or butter fly handle serwed both ends for iron pipe or for unions complete all as specified and as directed.
S&F for PVC connections 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed. Make : Prayag Cat No 323 or equivalent.
S&F Shelf Mirror (800x600mm) 5mm thick glass mirror with double coat for protection and longevity, 2 shelves with 5mm clear glass and stainless steel rail and silver plating on the back for better reflection with all fittings complete all as specified and directed. Make : Cera Cat No B 35510147.
S&F tubular towel rail 20mm dia D type 600 mm long between flanges of brass chromium plated fixed with and incl CP brass screws and wooden / plastic cleats all as secified and as directed. Make: CERA Cat No F5002103
S&F 15mm bore Overhead rain shower 250mm fis (10'') with all fittings etc complete all as specified. Make: Cera Cat No F7010401
S&F corner glass shelf with 2 racks with all fittings etc complete all as specified. Make: Cera Cat No F5005201 or equivalent approved make.
S&F Vitreous china wash down water closet pan (One Piece EWC with Seat cover and fittings) of size 700x370x760 Snow white/Ivory etc with complete fittings all as specified and directed. Make: CERA Cat No : S1013122 S Trap 300mm or equivalent.
S&F for PVC (SWR) pipes 110mm dia, single socketed, in any length with rubber ring joints fixed to wall, Floor as drainage complete all as specified and directed.
S&F for 150 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to wall, laid in trenches or in floor with necessary clamps, bolts, bends, Tee etc.complete all as specified and as directed
S&F for 110 mm bore PVC (SWR) bends any radius complete all as specified and directed.
S&F for 110 mm bore PVC (SWR) equal or unequal junction single (Single T) complete all as specified and directed.
S&F for 150 mm bore PVC(SWR) bends any radius complete all as specified and directed.
S&F for PVC (SWR) pipes 75mm dia, single socketed, in any length with rubber ring joints fixed to wall complete all as specified and directed.
S&F for PVC (SWR) pipes 75mm dia, single socketed, in any length with rubber ring joints lain in trenches complete all as specified and directed.
S&F for 75 mm bore PVC (SWR) bends any radius complete all as specified and directed.
S&F 75 mm bore PVC (SWR) equal or unequal junction single (SingleT)complete all as specified and directed.
S&F 75mm bore PVC (SWR) floor trap plain with grating including jointing with solvent cement complete all as specified and directed.
M&L for PCC 1:3:6 type C2 (using 40 mm grade stone aggregate), 75 mm thick as in plinth protection / approach path of bldg complete all as specified and directed.
M&L preparation of newly plastered surfaces of walls and applying two coat of white wash on new surfaces of walls all as specified and directed.
M&L for 100mm thick PCC 1:2:4 type B2 (using 40mm graded stone aggregate) as in sub-base of floor etc. complete all as specified and as directed.
M&L for 75mm thick PCC 1:3:6 type B2 (using 40mm graded stone aggregate) as in sub-base finished the surface fair and even complete all as specified and as directed.
M&L for 20mm steel tubing medium grade,galvanised fitting fixed complete to walls and ceiling or floor complete all as specified and directed.
M&L for 15mm Bore steel tubing medium grade,galvanised fitting fixed complete to walls and ceiling or floor complete all as specified and directed.
Cutting chases, pinning in, making good to facing where required and pointing in CM 1:3 for concealed water tubing conduit wiring etc and making good, cutting n.exc 10cm girth as in stone or concrete block walls complete all as specified and directed.
M&L for PCC 1:3:6 type C2 using 40mm graded stone aggregate as in surface channels/ drain including forming fair finished to drain channel complete all as specified and directed.
M&L for 40mm thick PCC 1:2:4 type B1 using 20mm graded stone aggregate as in floor finished even and smooth with using extra cement, complete all as specified and directed.
M&L for 38mm wide glass dividing strips, 3mm thick as in floors complete all as specified and directed.
M&L for preparation of new steel surface of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide complete all as specified and directed.
M&L for preparation of old/new plastered or unplastered surfaces of wall and applying two coats of Oil bound distemeper over one coat of 1mm thick wall care putty complete all as specified and directed.
S&F Rotational moulded polyethene water storage tanks 1000 ltrs, ISI Mark, multilayer constraction (Cylindrical vertical with close top) hoisted and fixed in position incl supply and fixing of 25mm bore ball valves, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball, screwed for iron pipe of having weight not less than 455 gms including connection complete all as specified and directed.
S&F Gun-metal, globe or gate valves with iron wheel head screwed both ends for GI pipe complete all as specified and directed.
M&L for applying two coat of exterior acrylic emulsion weather proof paint over a coat of primer over a coat of exterior wall care putty of required thickness as per manufacturers instruction including preparation of new surfaces of wall complete all as specified and directed
Surface excavation n exc 30 cm deep and averaging 15cm deep and getting out in soft /loose soil complete all as specifed.
Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc complete all as specified and as directed.
M&L for Lacquer coated coloured chequered cement concrete tiles of size 200mm x200mm x 25 mm/ 300 x 300mm x 25mm thick as in pavement/footpath/trade/riser, set and jointed in neat cement slurry and pointed with grey cement and pigment laid over and including screed bed/bedding layer of 15mm thick in cement mortar (1:6) all as specified and as directed.
Ditto as per item No. 63 but on vertical surface such as skirting/risers etc incl set and jointed in neat cement slurry and pointed with grey cement and pigment laid over and including 15mm thick rendering in cement mortar (1:4) all as specified and as directed.
S&F half round 150mm dia with rounded edges including all accessories/fittings like T , Y etc for eaves gutter complete all as specified and directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubish off the premises complete all as specified and directed.
Demolition of precast concrete block walling/brick wall built in cement mortar complete all as specified and directed.
Taking down cement plaste of any description on brick or stone wall etc including racking out joints hacking for key scrubbing down with water etc.
Taking down chowkats or frames exc 1.5 Sqm and n.exc 4 Sqm (without taking off shutter from the frames) each area n exc 1.5 Sqm and refixing the same/other oprening complete all as specified and directed.
M&L for precast PCC 1:3:6 type C1 (by using 20mm graded stone aggregate) block masonry with solid blocks, exc 10 cm thick ( witj plain or interlocking joints as directed) and width and setting in CM 1:6 complete all as specified and directed.
S&F soap dish chromium plated body and polycarbonate brackts including wall flange and screws etc complete all as specified and drected. Make ESSCO Cat part No. AEC-1133 or equivalent.
S&F Vitreous China squatting pan of ‘Orissa pattern’, size 580 mm x 440mm (white) with ‘P’ or ‘S’ trap, front or back inlet and foot rests, any pattern complete including provision of PCC bedding and connection to trap, and to flushing pipe, antisyphonage pipe, etc. complete including making good to floor complete all as specified & as dirceted. Make : ESSCO Cat part No. ECS-WHT-453 or equivalent.
S&F vitreous China wash down water closet pan (pedestal pattern), white, with ‘P’ or ‘S’ trap, front or back inlet, including fixing bolts, PVC seat cover and including supply and making all necessary connections complete all as specified & as dirceted. [Make : ESSCO Cat part No. ECS-WHT-551PSPP or equivalent.
S&F 10 litre capacity low level PVC flushing cistern (any colour), syphonic action type, with inlet, ball valve, float, handle, fixed with cast iron bracket (of suitable size) and providing 32 mm dia PVC flush pipe and making all necessary connections complete (excluding PVC connection pipe) complete all as specified & as dirceted. Make : ESSCO Cat part No. WHE-WHT-183L or equivalent.
S&F 600 x 450mm looking mirror with aluminium channel frame, mounted on 6mm thick commercial plywood frame and fixed to wooden plug with chromium plated brass screws & cup washers incl glass self assembly.
S&F 250mm long aluminium anodised sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet cast or extruded section complete.
S&F CP long body bib cock with wall flange and areator complete all as specified and dirceted. Make : ESSCO Cat part No.SQT-512KN or equivalent.
M&L for precast PCC 1:3:6 type C1 (by using 20mm graded stone aggregate) block masonry with solid blocks, exc 10 cm in width and setting in CM 1:6 complete all as specified and directed.
S&F Vitreous China, Wash Hand Basin, white, flat back of size 550 mm x 400 mm, including cutting for and pinning in ends of brackets or errecting stands and 15 mm bore PVC connector pipe, 32 mm dia chromium plated waste coupling, 32 mm dia PVC waste pipe complete all as specified & as dirceted.
S&F 15mm chromium plated pillars cock super delux with aerator complete all as speicified and directed. Make : ESSCO Cat part No.MQT-508KN or equivalent.
S&F 50mm bore, LDPE pipe of pressure 6Kg/Sqcm complete all as specified and directed.
Taking down carefully old aluminum anodised aluminium door frame/ door shutters, fixed type aluminium partition and refixing the same place, opening whereever as directed by engr-in-Charge incl pintel hinges, necessary fittings like door closer etc complete all as specified and directed
Cutting opening through walls for door, windows and other opening or enlarging existing openoing etc cutting out defective masonry built in cement martar for underpinning, including providing fixing and removing, shoring, cleaning and stacking stone and removing surplus to store and rubbish off the premises complete all as specified and as directed by Engr-in-Charge.
M&L for formworks to sides and soffit of floor,roof beam, beam haunching, girders, bressummers, lintels, cantiliver shelves including support overhangs etc also splays between floor and beam etc complete all specifed and directed
M&L for RCC 1:2:4 (nominal mix) 20mm graded aggregate as in beams, cantilevers, bressumers, lintels over 1.5m span complete all as specifed and directed.
M & L for TMT bars 10mm dia and over cut to length bent to shape required incl, cranking, bending spirally for hooping ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips conforming to IS:1786 complete all as specified and as directed.
M&L for TMT bars 5mm dia and over upto and incld 10mm dia as in stirrups, spacers and binders and binding with MS wire not less than 0.9mm dia (annealed) conforming to IS:1786, complete all as specified and as directed.
S&F vitreous China urinals, bowl type (back or corner wall type) complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws pointing around urinal back in cement with brackets, flush pipe grating and Union for discharge pipe.
M&L for Hardcore of gauge n exc. 63mm deposited spread and levelled in layers n exc 15 cm thick watered and rammed to true surface complete all as specified and directed.
Removing surplus soils to a distance not exceeding 50 mtr and depositing where directed at a level not exc. 1.5 mtr above the starting point complete all as specified and directed.
M&L for stone walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in cement mortar (1:4) including brought up to courses complete all as specified & as directed.
M&L rendering 20mm thick in CM 1:6 on the surface of stone masonry incl finish the surfaces even and smooth without using extra cement complete all as specified and directed.
M&L for PCC (1:3:6), type C-1 (using 20mm graded stone aggregate) as in coping, bed plates, parapet, plinth course including weathering, slightly rounded or chamfered angles and throating, complete all as specified & as directed.
Excavation in trenches not exc. 1.5 metre wide and not exc. 1.5 metre in depth and getting out as in soft/loose soil for foundation etc complete all as specified and directed.
Returning, filling in, including spreading levelling watering and well ramming in layers not exceeding 25 cms in thick as in soft/loose soils complete all as specified and directed.
M&L Sand filling in layers under floors or in foundations including watering and consolidation complete all as specified and directed.
M&L for applying two coats of exterior acrylic emulsion painting over a coat of alkali resistant primer including complete removal of existing treatment and preperation of old/new surfaces complete all as specified and directed.
M&L for second class hard wood plain solid straight chowkats and frames wrought framed rebated on the solid rounded on chamfered put together with glue pinned and joints complete all as specified and directed.
M&L for plain, framed, panelled shutters (two panel) 35 mm thick (any number of panels) , with lock rail and panel of 9mm B.W.P commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and style as per IS: 1003 9Part-I), kiln seasoned and chemically pressure treated complete all as specified and directed.
M&L for 6mm thick plywood, grade BWR, type BB fixed with screws to timber frame work as in ceiling.
M&L for plain fillets, square, rectangular or triangular in sec, exc 6 Sqcm but n exc 13 Sqcm clean sawn, secured with nails or brad complete all as specified and directed.
M&L for preparation of new or previously untreated wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer comlete all as specified and directed.
M&L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS-15658-2006 of 60mm thickness confirming to M-35 grade with grey cement and pigment complete all as specified and as directed.
M&L for preparation of complete removal of existing treatment on old plastered surfaces of walls applying two coat of distemper, oil emulsion, white or tinted over old wall surface complete all as specified and as directed.
E/M PORTION M & L for point wiring with 1.5 Sqmm PVC insulated unsheathed single core stranded copper conductor (FRLS) Cable of working voltage 1100 Volts grade conforming to IS-694 pt-I & II of 2000 drawn in and including 25 mm size PVC rigid non matellic casing caping (Double lock) with all casing capping fittings & accessories with 1.60 mm thick pressed steel or mild steel sheet sunk box covered with 3 mm thick backelite sheet fixed with brass screws & cup washers including 1.5 sqmm PVC insulated unsheathed single core stranded copper conductor (FRLS) cable as earth continuity conductor connected to main switch / DB's or common earth dolly complete for for light point/ fan point/ exhaust fan point/ call bell point/ controlled by one switch 5/6 Amp one way complete all as specified and directed.
All as per Item No 105 here-in- before but for one socket outlet of 15 Amps fixed on independent board with 4 Sqmm multistranded copper conductor wire FRLS PVC insulated and 4 Sqmm copper condcutor wire FRLS PVC insulated using as earth wire complete all as speicfied and directed by Engineer-in-Charge
S&F switch piano flush single pole, one way 5 Amp (ISI marked) complete all as specified and directed
S&F in repairs modular socket combination, 2 in 1, 6 pin, 5/6 Amps and 15/16 Amps, multipurpose , flush, non shutter, non inter locking type, 230 volt flush type,complete all as directed including taking down old one. Make : Havells AHFKCXW253 or equivalent of make as specified.
S&F in repairs LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and as directed (Make : Havells Cat No PLUTOSURFACE4X1PLS34WLED857S or equivalent of approved make)
Supply, installation, testing and commissioning of electric water heater, storage vertical type, BEE 5 star rated, 25 Ltr capacity 230 volts AC, 50 Hz comprising of high wattage heating element for instant heating, extra thick SS inner tank of superior 304 grade, rust & sock proof ABS outer body, non-ferrous pressure plate with & including provision of Pressure relief valve and grouting bolts suitably flushed to wall or any other surface including electric connection with 3 core PVC insulated, sheathed, stranded copper conductor cable/flexible chord complete all as specified and as directed. Make : - Havells Cat No - Monza DX : GHWBMGSWH0550 or equivalent approved.
Supply and fix Brass Tee of outer dia 16mm dia, complete all as specified and directed.
Supplying and laying of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceilling or laying in floors etc of outer 16mm dia complete all as specified and directed
Supply and fix stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed of size 15mm, complete all as specified and directed.
Supply and fix bib taps, cast copper alloy fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed of size 15mm, complete all as specified and directed
M&L for concealed sub-main wiring along with earth wire of size of 2x 6.0 Sqmm + 1 x 6.0 Sqmm earth wire, ISI marked FRLS, PVC insulated, multi stranded, copper conductor, single core cable drawn through and incl PVC rigid conduit (medium grade) with all fittings and accessories ISI marked including cutting chases for conduits & sinkings for sunken boxes & making good to walls, floors tec complete including taking down old unserviceable one all as specified and as directed.
S&F in repairs sheet metal enclosure for 4 way Distribution Boards (DB’s), single pole and neutral double door with IP-43 protection suitable for fixing MCB's/lsolators after and including taking down old DB with MCB complete all as specified and as directed. (Make : L&T cat No DBTPE004DD or equivalent of approved make)
S&F in repairs MCB, single pole & neutral, 63 amps, 240 volts, 10 KA complete all as specified and as directed (Make : L&T cat No BB20630C or equivalent of approved make)
S&F in repairs MCB single pole 6 to 32 Amps, 240 Volts, 10 KA rapturing capacity, 'C' Curve complete all as directed by Engineer-in-charge. (Make : L&T cat No BB20320C or equivalent of approved make)
Supply, laying, jointing and testing in trenches or passing through pipe, 1100 Volts grade XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured LT electric power under ground cable conforming to IS:"7098 (Pt-I)-1988 heavy duty with aluminium conductor of cross sectional area 16 Sqmm 2 core with necessary fixing arrangements such as lungs, glands and terminal etc complete all as specifed and as directed.
Supply and laying DWC pipe SN-4 with coupler 40mm OD, ISI marked along with all accessories like socket, bend, couplers etc. Conforming to IS-14930. Part II complete with fitting and cutting jointing etc laid in trenches/fixed to pole/laying under road corssing/fixed on pavement walls with clamps complete all as specified and as directed
Excavation in trenches not exc. 1.5 metre wide and not exc. 1.5 metre in depth for laying of cable/foundation of pole and getting out in loose/hard/rocky soil complete all as specified and directed.
Returning, filling in, including spreading levelling watering and well ramming in layers not exceeding 25 cms complete all as specified and directed.
Removal of surplus excavated (soil) to a distance not exceeding 50mtr and depositing where directed at a level not exceeding 1.50m above the starting point complete all as specified and as directed
S&F MCB, SPN, 10KA, 240V, C curve 6-32A, ISI marked complete all as specified and as directed
S&F MCB distribution boards (DBs) with sheet metal enclosure, single door, IP-43 protection, 240 volts, 2 way, single pole and neutral, with 100 Amps rated copper bus bar (as per OEM), neutral link ertth link earthing studs, suitable for fixing MCBs , without MCBs fixed flush to wall /other surface
M & L for earthing in repairs complete with galvanized steel earth plate electrode 600x600x6 mm thick, burried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate not less 1.5 mtr deep below normal ground level connected to GI earth wire 4 mm dia connected to earth plate by means of nut, bolts, check nut & washer of galvanized iron or of steel, GI earth wire will be protected by 15 mm dia GI pipe 'light grade', watering pipe 20 mm dia GI 'light grade', GI wire meshed funnel, alternate layer of char coal and salt on all side to earth plate upto thickness of 150 mm, filling of black cotton soil in earth pit upto ground level, PCC chamber recessed for and including RCC cover including all necessary excavation & earth work, earth wire connected to O/H continious earth wire on pole, testing the earthing after completion all as specified and shown in electric plate No 3 of MES SSR Part-I 1991 print and as directed .
Supply and fix lamp holder angular/straight insulated body, with back plate suitable for batten fittings, white/ivory finish complete all as speicifed and as directed.
Supply and fixing exhaust fan with louvers 250mm sweep (Plastic rust proof body and blade), 1280 RPM, AC Single phase 240 volts, 50Hz, power input- 45 watts, Air delivery - 860 CMH and connecting up complete including built in louvers and provision of 3 core flexible multistranded copper conductor of size 0.75 Sqmm from ceiling rose to fan all as directed
All as per item No105 here-in-before but for one 3 pin 5 Amps fixed on independent board with 1.5 Sqmm size FRLS PVC insulated unsheathed multistranded copper conductor cable wire with 1.5 Sqmm FRLS PVC insulated unsheathed solid copper conductor as earth wire complete all as specified and directed by Engineer-in-Charge
All as per item No105 here-in-before but for one 3 pin 15 Amps fixed on independent board with 2.5 Sqmm size FRLS PVC insulated unsheathed multistranded copper conductor cable wire with 2.5 Sqmm FRLS PVC insulated unsheathed solid copper conductor as earth wire complete all as specified and directed by Engineer-in-Charge
S&F switch socket combination, 2 in 1, 6 pin, 5/6 Amps and 15/16 Amps, multipurpose, flush, non shutter, non inter locking type, 230 volt flush type white/ivory finish with two fixing hole including suitable gang box complete all as directed. Make: Anchor Cat No 38808/50665 or equivalent of approval make
S&F LED lights fitting 1x 18W, 220V, ,4 feet long,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed (Make : Havells Cat No LUMILINE+BS18WLED830SPCSS or equivalent of approved make)
Supply and fixing LED light fitting mirror type with high output diffuser 2 feet, 5 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper flexible copper conductor cable of suitable size complete all as directed
S&F in repairs LED light fitting 1x9W/1x10W bulk head luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size all as specified and as directed
Supply and laying of fixing or passing through pipe, 1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed 4 sq.mm nominal cross section in service connections
BIJAY MITTAL
M/S ANIL KUMAR THAKUR
NISHA CONSTRUCTIONS
DHARMINDER SINGH
MAHENDRA KHAWAS
KARMA SHERPA
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .