REPAIRS TO JOINERY ANDMISC ITMES OF OTM MD ACCN AT WEST SIDE OF AGE BR I UNDER GE GOLCONDA

Amount

Taking down chowkats or frames with shutters (without taking off shutter from the frames) n exc. 1.5 sqm each complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutter from the frames) exc. 1.5 sqm but n exc 4.00 each complete all as specified and directed.

Taking down shutters of any description n. exc. 1 Sqm each complete all as specified and directed.

Taking down shutters of any description exc. 1 Sqm but n exc 2.00 sqm each complete all as specified and directed.

M&L 2nd class hard wood plain straight solid chowkats and frames wrought, framed, rounded, chamfered put together with glue pinned joints and making good the surfaces complete all as specified and directed.

S & F in repairs 2nd class hardwood exc 13 & n exc 25 sqcm plain fillets square, rectangular or triangular in section, clean sawn, secured with nails or brads complete all as specified and directed.

S & F Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required; hooks (stay), heavy, for large gates; hook and pintle hinges; large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts of size 25x3 mm MS flat; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe 410-0 or Fe 310-0

M&L for cement concrete 1:2:4 type BI using 20mm graded stone aggregate as in bed block for hold fasts and coping incl necessary form work weathering slighly rounded or chamfered angles and treating and making good the disturbed portion complete all as specified and directed.

S & F Window guard bars, plain, let in and fixed independently in wodden frames, L or T section section supports for shelves etc. and similar articles conforming to Fe 290-0 or Gde E-165 including making hole on wooden frame to insert guard bars complete all as specified and directed.

M&L 2nd class hard wood plain framed factory made panel shutter 35 mm thick (two or three panels) with lock rail and panel of 12mm veneered particle board with commercial veneering on both faces, the size of rail & style as per IS 1003 (Part-I) Kiln seasoned and chemically pressure treated.

S & F 35 mm thick IInd class hard wood factory made glazed and skelton shutters sizes of members as specified in SSR(Part-I) clause 8.20(a), open rebated and prepared to receive glass or gauge, divided into squares, edges of framing plain, chamfered or rounded, fitted with cut and miterd beads or rebated sash bars for securing glass or gauge etc. complete all as specified and directed.

S & F 30 mm thick 2nd class hard wood factory made glazed and skeleton shutter divided into square, with plain chamfered or rounded metred and rebital sash bar any number and framing moulded windows, ventilators, etc. provided with stiles and rails as specified in SSR Part I, Section 8 clause 8.20 (b) fitted to chowkats complete all as specified and directed.

S & F factory made flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, thickness 35 mm, etc complete all as specified and directed.

S & F for Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc. complete, drilled for fixing of steel sheeting or other covering doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing, Fe 410-W (Gde-E-250) quality-A, etc complete all as specified and directed.

S & F Mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws,clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required, Thickness of sheet 1.60 mm, etc complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for.

S & F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, frame complete with glazing bars, dovetailed or welded, etc complete all as specified and directed.

M & L for steel window with side hung shutters including projecting type hinges with steel handle and peg stay complete with out glazing bars dovtailed or welded complete all as specified and directed.

S & F MS Butt hinges medium weight cold rolled of size 100mm complete all as specified and directed.

S & F in repairs mild steel 200 mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified ( short type, fighter jet aeroplane shape type)

S & F MS Butt hinges medium weight cold rolled of size 75mm complete all as directed.

S & F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of apreture 1.00 mm & fixed with stainless steel wire, staples all as specified and directed.

M & L preparation of surfaces of wood based material any description over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M & L preparation of new steel surfaces any description over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M & L for 18 mm thick plywood, grade BWR, type BB, fixed with screws to timber frame work for cub board, kitchen cub board and shelves and other uses etc completed all as specified and directed.

S & F Continuous (piano) hinges, mild steel, bright finish or electro galvanised,width of flaps (when open) 30 mm etc complete all as specified and directed.

S & F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube in opening as per manufacturer instruction complete all as specified and directed.

S & F factory made solid PVC Panel Door shutter 30mm thick (style) consisting of Frame made out of M.S Tube for top & Bottom rails. MS Frame shall be covered with heat moulded, Plain colour PVC ’C’ channel having a PVC Sheets strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for Top rail, lock rail bottom rail on either side and as gap insert for top rail and bottom rail, paneling of plain colour 5mm thick PVC sheet to be fitted in the MS Frame, welded/ sealed to stiles and rail with suitable PVC sheet beading, and joined together with solvent cement as per manufacture instruction complete all as specified and directed.

S & F 100 MM Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21.

S & F 150 mm aluminium anodised barrel tower bolts of extruded section complete all as specified and directed.

S & F Aluminium anodised, barrel tower bolts of extruded section length of bolt 200 mm etc complete all as specified and directed.

S & F 150 mm long extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

S & F Extruded aluminium alloy handles, fabricated type, anodised, Size of handle in 100 mm, etc complete all as specified and directed.

S & F 250 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections or cast-aluminium alloy complete all as specified and directed.

S & F for Aluminium alloy, anodised,sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, length of bolt 300 mm complete all as specified and directed.

S & F for Aluminium wire type I, Gate and shutter, hooks and eyes 150 mm complete all as specified and directed.

S & F in repair MS 25 mm dia Drapery curtain rods powder coated decorative type complete all as specified and directed.

S & F in repair MS fancy powder coated brackets for 25 mm dia drapery curtain rods complete all as specified and directed.

S & F 3mm thick sheet glass ordinary quality and glazing with wooden beads or oil putty in square not exc. 0.50 Sqm in each pane complete all as specified and directed.

S & F 3mm thick figured glass, pin head type andd glazing with wooden beads or oil putty in square not exc. 0.50 Sqm in each pane complete all as specified and directed.

S & F powder coated (minimum thickness of powder coating 50 micron) aluminium anodised frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing, etc complete all as specified and directed.

S & F powder coated (minimum thickness of powder coating 50 micron) aluminium anodised door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws, etc complete all as specified and directed.

S & F for powder coated (minimum thickness of powder coating 50 micron) aluminium anodised window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws,three track etc complete, as specified and directed.

S&F 5.5 mm thick glass fixed in aluminium door/window/ventilator with aluminium beading complete all as specified and directed.

M&L 12 mm thick pre-laminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed to aluminium frame with aluminium beading complete all as specified and directed.

S&F aluminium Door closer hydraulically regulated designation No 3 universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg complete all as specified and directed.

S&F Brass mortice lock 4 levers, vertical type size 100 mm complete all as specified and directed.

S&F 140 mm size floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring complete all as specified and directed.

Demolition of brick work or stone masonary, built in cement mortar complete all as specified and directed..

M&L brick work with old size fly ash bricks straight or curved on plan exc 6 mtr mean radius built in CM 1:6 complete all as specified and directed.

M & L half Brick wall with old size fly ash bricks straight or curved on plan any radius built in cement mortar 1:4 complete all as specified and directed.

Taking down cement plaster on brick wall/stone wall, ceilings etc, racking out joints, hacking for key & scrubbing with water complete all as specified and directed.

M&L rendering 15mm thick in CM 1:6 on fair faces of brick walls, surfaces finished even & smooth without using extra cement complete all as specified and directed.

M&L rendering 15mm thick in CM 1:4 on fair faces of brick surfaces of walls finished the surfaces even & smooth without using extra cement.

M&L 5 mm thick rendering in CM 1:3 on surface of ceilings finished even and smooth w/o using extra cement complete all as specified and directed.

M&L for preparing newly plastered surfaces and applying two coats of white wash on walls complete all as specified and directed.

M&L for preparing newly plastered surfaces and applying two coats of colour wash on walls complete all as specified and directed.

M&L for preparing newly plastered surfaces and applying two coats of white wash on ceiling complete all as specified and directed.

M&L for preparing newly plastered surfaces and applying two coats of OBD over a coat of primer on walls complete all as specified and directed.

S&F in repair stainless steel wire cloth 0.36 mm nominal dia of wire & average width of aperture 1.40mm and fixed with wooden beading, and tinned tack or galvanised wire staples or necessary nut & bolt etc complete all as specified and directed.

M/S V PRATAP REDDY

STANDARD AGENCIES

m/s s indra reddy constructions

M/S Veerabhadra Constructions

M/s D.Krishna Varma

Sri Lakshmi Enterprises

MRK CONSTRUCTIONS

NAVANAND ENTERPRISES