PROVISION OF DEFICIENT PARKING SHED NEAR DPM OFFICE AND OTHER SANCTIONED WORKS UNDER AGE B/R-I AND CERTAIN REVENUE AND MINOR WORKS UNDER AGE E/M OF GE HADDO, PORT BLAIR

Amount

Excavating over areas, n exc 1.50 m deep and getting out in hard/dense soil complete all as specified and directed

Excavating over area exc 1.5 m wide and n exc 3.0 m in depth and getting out in hard/dense soil as in foundation complete all as specified and directed

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shear beam, shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in hard/dense soil complete all as specified and directed

Demolition of precast cement concrete block masonary of any description complete all as specified and directed

Demolition of cement concrete (Un-reinforced) in ground floor and pavings not exc 15cm thick (above or below GL) complete all as specified and directed

Removing building materials etc (other than spoil payable under items 03028 to 03031 in section 3 Earth work) to a distance not exc 200m in low laying MOD area or under, beyond the lead included in the rates, including loading, unloading and stacking at the destination complete all as specified and directed

M&L for precast cement concrete block masonary with solid blocks using PCC 1:3:6, type C1(using 20mm graded stone aggregate) exc 10cm in width, set in CM 1:4 all as specified and directed by engineer in charge

Return filling in Surplus soil, back filling of retaining wall including spreading, levelling, watering and well ramming in layers n.exc. 25cm all as specified.

Removing excavated soil exc 50 m but n.exc 200 m and depositing where directed at level n.exc 1.5 m above the starting point complete all as specified and directed

PCC 1:4:8 type D2 using 40 mm graded crushed stone aggregate as in filling, foundation and mass concrete complete all as specified and directed

M&L for Design mix RCC M-30 (using 20mm graded stone aggregate) in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concretecomplete all as specified and directed

M&L for Design mix RCC M-30 (using 20mm graded stone aggregate) in Walls, retaining walls,basement walls, ballast walls and the like; anythickness; above top of footings; including attached pilasters and buttresses complete all as specified and directed

M&L for use and waste form work to sides of concrete foundations, footings, rafts, and raft beams sides and soffit of foundations and plinth beam, shear key and similar work for flat rough finished surface all as specified

M&L for use and waste form work to faces of walls retaining walls, abutments, parapets, drain walls and like for flat rough finishesd surface all as specified

M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed

M&L for use and waste of timbering as planking and strutting for excavation exc 1.5m but not exc 3.0m in trench in soil including wales, struts, open poling boards etc as may be necessary and fixing and removal complete all as specified

M&L for mild steel TMT bars 6mm to 8mm dia and cut to length, bent to shape required, including cranking and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed

M&L for 15mm thick plaster in CM 1:4 on fair face of brick walls or concrete surface including mixing of liquid water proofing compound @ 200ml per 50 Kg cement bag, finished the surface even and smooth without using extra cement complete all as specified. (Note: Water proofing compound shall be measured and paid separately)

Supply only liquid water proofing compound. [Make : Fosroc/ Dr Fixit / Cicco]

M&L for preparing newly plastered wall surface and applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/10 Sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 Sqm complete all as specified and directed

Supply only graded coarse aggregate of nominal size 40mm complete all as specified and directed

S&F PVC (SWR) pipe 110mm bore, single socketed, in any length with rubber ring joints and jointed with approved adhesive laid in trenches or in floors complete all as specified and directed

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm in hard/dense soil complete all as specified and directed

Removal of surplus soil to a distance n. exc. 50m and deposited where directed at a level n. exc. 1.5 m above the starting point complete all as specified and directed

M&L for cement concrete type B1, 1:2:4 (20mm aggregate) in foundations, filling and mass concrete complete all as specified and directed

M& L for precast cement concrete block masonry with solid blocks using PCC 1:3:6, type C1(using 20mm graded stone aggregate), exc. 10cm in width, set in CM 1:6 all as specified

M&L Rendering 10mm thick on fair faces of brick work or concrete surfaces finished with even and smooth without using extra cement in CM 1:6 complete all as specified and directed

M&L for preparation of new plastered surfaces of walls & applying two coats of oil emulsion distemper over a coat of primer complete all as specified and directed

S & F of 150 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed

S & F Rolled sections as in main and cross beams, hip and jack rafters; purlins, pole where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates using structural steel of Fe-410W (Gde E-250 quality A) complete all as specified and directed

M & L for roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to Fe-410-W(Gde-E-250) quality-A complete all as specified.

S&F mild steel Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment complete all as specified and directed

Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws in semi circular/ curved shape all as specified and directed.

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

M & L for preparing of new of previously untreated steel surface of any description, not otherwise described, over 10 cm width or girth applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed.

M&L plain anodised aluminium flat section not less than 0.68 Kg per RM as in wind tie fixed with aluminium self tapping screws complete all as specifed

Material and labour for point wiring for one light point or one fan point controlled by one switch with using 1.5 Sqmm (nominal area) stranded copper conductor, single core, PVC insulated & unsheathed cable, 1100 volts grade in and including concealed / surface as possible PVC conduits (Medium grade) of size not less than 20 mm dia incl proper colour coding Phase -red/yellow/blue, neutral- black and earth green all as directed with sunken type pressed steel terminal box and junction boxes 1.6mm thick of suitable size, duly painted with one coat of red oxide primer and two coats of black bituminous paint for mounting fittings and wiring to be terminated in pressed steel sunken boxes with and including all accessories for modular fittings like cover plate with frame and using 1.5 Sqmm (nominal area) stranded copper conductor single core conductor, PVC insulated & unsheathed cable as in earth wire connected to common earth dolly complete for one light/fan point all as specified and directed. Make: Gloster/Havells/Anchor/ Polycab/Finolex

Description same as per Srl item No 39 above but One light/fan point controlled by one switch 5 Amps one way.

All as per item No 39 above but for two light point controlled by one switch 5 Amps one way.

Description same as per Srl item No 39 above but, point wiring for 5 pin switch socket outlet , 6 Amps on independent board

Description same as per Srl item No 39 above but, point wiring for 5 pin switch socket outlet , 6 Amps on same board

M&L for Point wiring complete with 4.0 Sqmm (nominal area) single core, PVC insulated unsheathed, FRLS cable, 1100 volts grade, multistranded copper conductor (with colour coding of Red/Blue/Yellow for phase and Black for neutral), drawn through and including PVC casing and caping not less than 25mm width with all fittings, surface on walls/ceilings etc., including provision of PVC insulated 4.0 Sqmm FRLS cable with copper conductor green in colour for earth continuity and connected to common earth dolly and sunk pressed steel terminal boxes with plastic laminated sheet cover of 3mm thick on top for housing the switches, socket outlet etc, all as specified and as directed for ONE 16A SOCKET OUTLET point controlled by one, one way 16 Amps switch on independent board.

Supply & fixing for switch modular type, 6 Amps 1 module, 230 volts AC circuit complete all as specified and directed. Make : Roma (Anchor)/ Legrand/ Simens /Havells.

Supply & fixing for switch modular type, 16 Amps 1 module, 230 volts AC circuit complete all as specified and directed. Make : Roma (Anchor)/ Legrand/ Simens/ Havells.

S & F for socket outlet modular type 1 way 6 Amps, 3 pin, flush type 230 volts AC circuit complete all as specified and directed. Make : Roma (Anchor)/Legrand/Simens/Havells

S & F Socket outlet 2 in 1 modular type, 3 pin, 5 and 15, flush type, universal all as directed. Make: Anchor /Cona/ Legrand.

S & F stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc. as reqd complete all as specified. Make:Roma (Anchor) /Legrand/ Simens/ Havells

S & F and testing LED recessed mounted 2' x 2' LED luminarie IRIS Slim Panel with high transmitive diffuser of cap 40 watt, size 2 x 2 Ft with longer life and less maintenance including all accessories and fixing arrangements for fixing the light fitting complete all as specified and directed. Make: Luker model no-LPS40 or equivalent to CG/ Havells/ Philips

S & F FUOCO track LED light 12 watt, (WH/WW/NW) on channel of suitable size of required length as directed. Make:- LUKAR model No-LSPT12 (60 degree) or equivalent to Havells/ Philips.

Supply and fixing of Decorative ultra slim linear LED lighting fixture of 15 Watt recess mounted 220V , 50Hz with extruded Polycarbonate, Aluminium heat Sink ,environmental friendly energy efficient fitting recess mounted round/square in shape (Warm white/white colour as per requirement of site complete) of light as required at site) complete all as specified and directed. Make - Philips Cat Part No : Dura Slim or equivalent make in CG//Havels

S & F BLDC 5 star rated ceiling fan metallic body ISI marked 1200 mm sweep, 220V Ac, 50 Hz complete with all accessories. Make: CG Model No : ENERGION Riviera with out remote 32 watt or equvalent make of Havells/Orient, Usha /Bajaj.

Supply & fixing Wall mounting fan 400 mm sweeep incl all fixing arrangement complete all as specified and directed Make:CG Model No : FHWPCPTWHY16 or equivalent to Eva/Havells/Usha/ Orient

S & F Sub main wiring with PVC insulated cable 2 single core 4 sq mm 1100 V grade with stranded copper conductor cable using proper colour coding Phase Red/Yellow/Blue, Neutral- black and earth- green in and incl rigid PVC conduit concealed in wall (ISI marked) incl all specials like joint elbow, Tee ,junction , bend etc and provision of PVC insulated copper conductor single core 4.0 sq mm for earth continuity all as directed. Make: Gloster/ Havells/ Anchor/ Polycab/ Finolex.

S & F SPN DB sheet metal enclosure double door suitable (IP-43) Protection 8 Way with 200 Amp rated standard bus bar of suitable size plate and common neutral link all enclosed in standard steel sheet flush mounting type factory fabricated complete. Make : Indo Asian/ Havells /L&T

Supply & fixing MCB SPN 40 Amps (`C’ series) having current rating 10 KA complete all as specified and directed Make : Indo Asian /Havells /L&T

Supplying & fixing MCB single pole, 6 to 32 Amps (`C’ series) having current rating 10 KA complete all as specified and directed. Make : Indo Asian/Havells/L&T

Earthing complete with galvanised earth plate electrode 60 cm x 60cmx 6.15 mm thick, buried directly in ground vertically (earth pit not less than 2.25 m deep below ground level) with top edge of the earth plate not less than 1.5m below ground level , connected to GI earth wire 4 MM Dia as earthling lead by means bolts and nuts check nuts and washers of galvanized iron and connected to main switch board including watering arrangement with PCC chamber , MS funnel with wire mesh,. CI cover with frame etc including necessary excavation in any type of strata , returning, filling removal of soil outside MD land ,filling of charcoal and salt complete all as shown in electrical plate No. 3 of MES Sch Part I , connected to Earthing test point all as specified and directed on testing on completion.

Supply, install, test & commissioning of Split type air conditioner, 2.0 TR capacity, BEE 5-Star rating, having cord less remote control unit, wall mounted inverter type with built-in ioniser and plasma filter for better air quality, copper condenser, electric driven, single phase, 240 volts, 50 Hz, AC supply including transporting to site, fixing of indoor and outdoor units with necessary wall mounting brackets, necessary copper piping connections, cutting, bending, brazing, proper insulation on copper pipe and all other pipes, PVC drain pipe upto ground level, installation complete with all accessories including connecting electrically between indoor and outdoor units with suitable size of PVC insulated multistranded copper conductor of size 4 sqmm, complete all as specified and as directed. MAKE : Blue star of model IC524 DNU/ Hitachi/Daikin NOTE:1. Extra all connected pipes shall be paid seperately. 2. The drain out water pipe connection should be connected up to ground level

Supply and fix Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 V to 250 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity 5 KVA complete all as specified and directed.

S & F Sub main wiring with PVC insulated cable 2 single core 4 sq mm 1100 V grade with stranded copper conductor in and incl rigid PVC Casing and capping (ISI marked) incl all specials and provision of PVC insulated copper conductor single core 4.0 sq mm for earth continuity all as directed.

S & F the following items of Split AC complete all as specified and as directed by Engineer-in-charge.

5/8" copper pipe

3/8" copper pipe

5/8" Insulation hose

3/8" Insulation hose

2.5 Sqmm 3 core flexible cable

1" CPVC hard drain Pipe

S & F of Starter switch of capacity 25 amps, working on 240 volts AC supply, suitable for air conditioner. Make : (Crabtree: Cat Part No.ACTO252504 or equivalent in Anchor/ Standard

Supply and fix water cooler electric driven (single phase), having approx storage capacity of 80 litre and nominal cooling capacity of 40 Litres per hour including necessary fixing arrangement along with connected plumbing materials complete all as specified. MAKE : Voltas Model No : FSS4080 or equivalent in Bluestar / Usha.

Supplying and laying of CPVC pipe of size 20mm,SDR 11 & Plain CPVC SDR 11 including all fittings such as Tees/bends/sokets/ unions/ ball valves on walls/ceiling or laying in floors complete all as specified.

Supply and fix refrigerator, electric driven (single phase), capacity 308 Litres.BEE 5 star rated complete all as specified and as directed. Make : LG GL-S322RPZX

M&L for Point wiring two single core 2.5 sqmm size PVC insulated, unsheathed FRLS multistranded copper conductor cable and one single core 2.5 sqmm size green colour PVC insulated FRLS multistranded copper conductor cable as earth continuity conductor, 1100 volt grade (with proper colour coding Red/Blue/yellow for phase, black for neutral and green for earth) complete drawn through and including PVC casing and caping not less than 25mm width with all fittings, surface on wall/roof /floor including including sunk pressed steel terminal boxes with 3mm thick plastic laminated sheet top cover for mounting switches/ sockets/ regulators etc. complete as specified for one 15 amps socket point controlled by one 15ams switch :- Make of wire : Polycab/Gloster/Anchor/Havells/ Finolex/Anchor and Make of PVC Casing & caping : Modi/Precision/Supreme/Finolex /Polycab

S&F Switch piano, flush type, single pole one way 15 amps all as directed. Make: Anchor/Cona/Legrand

S&F Socket outlet 2 in 1, 3 pin, 5 and 15 amp flush type all as directed. Make: Anchor/Cona/Legrand.

Supply and fix Water heater Energy Efficient BEE 5 star, rated storage type of 25 Ltrs capacity with rated 2 KW, vertical electric complete including flexible type for hot and cold water, dead weight pressure release valve, Anchor fastner-4 Nos of suitable size all as directed by Engr In Charge. Make- Havells (model No GHWAFATWB025) or equivalent to make of CG / Usha.

V KARTHICK

LOOK UP ENTERPRISES

M/s K Moorthi

CHANDER SEKER ENTERPRISE

M/S VISHAL CONSTRUCTION

M/s Ramesh Lal

DISHA ENTERPRISES

Bismi Builders & Enterprises