Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹31.9 L
EMD Value
₹80,000
Closing Date
4 Jan 2024, 9:30 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Rural Development and Panchayat Raj Department
H HARISH KUMAR
Construction of 02 Class rooms at 1st floor and one separate toilet and ramp for specially abled students for Dommasandra Government Pre Graduate college (SCP) Anekal Taluk, Anirbandhitha Z.P. Grants 2023-24
RDPR/2023-24/BD/WORK_INDENT2865
RDPR/2023-24/BD/WORK_INDENT2865
Open
Buildings
Two Tender Document System(Two Cover)
RDPR Division Office Bengaluru Urban
3 documents required · 3 mandatory
Work Done Certificate 50% of similar nature of work last five years period. 2018-19 to 2022-23
PWD Registration certificate Class III and above
Annual turnover Certificate - CA with UDIN No. last five years period. 2018-19 to 2022-23
NOT APPLICABLE
NOT APPLICABLE
NOT APPLICABLE
NOT APPLICABLE
NOT APPLICABLE
NOT APPLICABLE
NOT APPLICABLE
NOT APPLICABLE
NOT APPLICABLE
₹800
₹80,000
28 Dec 2023
28 Dec 2023
5 Jan 2024
4 Jan 2024
Construction of 02 Class rooms at 1st floor and one separate toilet and ramp for specially abled students for Dommasandra Government Pre Graduate college (SCP) Anekal Taluk, Anirbandhitha Z.P. Grants 2023-24
Dismantling expanded metal or I.R.C. fabrics with necessary battens and beading including stacking the serviceable material to the appropriate disposal area as per direction. with all lead, lift, load...
Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-in-...
Disposal of building rubbish / malba / similar unserviceable, dismantledor waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as ap...
Earth work in surface excavation by mechanical means for lowering & levelling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and t...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, basement excavation, to...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
Providing Coursed rubble masonry (second sort) with hard stone in
foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand).with all lead, lift, loading, unloading, labour, fuel, hire cha...
Providing Size Stone masonry with hard stone in foundation & plinth with
Cement mortar 1:6 (1 cement : 6 coarse sand).with all lead, lift, loading, unloading, labour, fuel, hire charges of machinerie...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...
Providing and laying in Cement Concrete for all Basement & surface levelworks, return walls, retaining walls, sunken floors etc. The granite/trap/ basalt crushed graded coarse aggregates and fine aggr...
Providing and laying in position Cement Concrete for all Super structures of building, Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap...
Providing and laying in position Cement Concrete for all Super structures of building, Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap...
Providing and laying in position Cement Concrete for all Super structures of building, Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap...
Filling available excavated earth (excluding rock) in trenches, plinth,sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ra...
Providing and constructing load bearing wall with Solid Concrete blocks of size 400x150x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
Providing & fixing factory made PVC Door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet metered cut at corners & jointed 2 No.s of 150 mmlong bracket...
Providing & fixing 30mm thick factory made rigid foam Panelled Door Shutters made from M.S. tube of 19 gauge thickness, size 19x19mm for stiles and 15x15mm for top & bottom rails, covered with heat mo...
Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side /top /centre hung, with beading and all members such as F7D, F4B, K11 B and K12 B etc. complete of standa...
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openi...
Providing 12 mm cement plaster with cement mortar 1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of m...
Providing 12 mm cement plaster with Cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement to brick masonry including rounding off corners wherever required smooth re...
Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corne...
Providing 15 mm cement plaster on rough side of single or half brickwall finished with a floating coat of neat cement of mix 1:3 (1 cement: 3 fine sand) including rounding off corners wherever require...
Providing, laying & fixing cement base, precast, pre polished cement concrete, designer tiles 25mm thick conforming to IS 1237 heavy duty tiles for flooring, treads of steps and landing, laid on a bed...
Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed t...
Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle gr...
Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel et...
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per sp...
Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and including water thinnable priming coat with cement primer after th...
Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface :Water thinnable cement primer to give an even shade after thoroughly brooming the surface to remov...
Finishing walls with water proofing cement paint of required shade :New work (Two coats applied at 4.84 kg/10 Sqmtr) to give an even shade after thoroughly brooming the surface to remove all dirt, dus...
Dismantling weather proof course and removing and conveying the debris to a distance to the appropriate disposal area. with all lead, lift, loading, unloading, labour, fuel, hire charges of machinerie...
Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as a...
Supplying, fitting and placing TMT FE 550/550D Steel Reinforcement complete including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping / welding joi...
Providing and laying in position cement concrete for all Super structures of building, Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ tra...
Providing and laying in position cement concrete for all Super structures of building, Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ tra...
Providing and laying in position cement concrete for all Super structures of building, Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ tra...
Providing and laying in position cement concrete for all Super structures of building, Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ tra...
Providing and constructing load bearing wall with Solid Concrete blocks of size 400x150x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side c...
Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding hold fast in cement concrete 1:3:6 of 20mm and down size gran...
Fixing of window frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size gra...
Providing and fixing in position fully panelled Matti/Nandi wood shutters for doors with, stiles and rails of 30mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per dr...
Providing and fixing in position windows half paneled shutters at bottom and half glazed at top for window shutters with Honne wood stiles and rails of 30mm. thick, 75mm wide in two halves with panels...
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openi...
Providing 12 mm cement plaster with cement mortar 1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of m...
Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corne...
Providing 15 mm cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement on the rough side of single or half brick wall including rounding off corne...
Providing and laying Vitrified tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08% and conforming to I.S. 15622, of approved make, in all colours & shade, over 12 mm ...
Providing and laying Vitrified tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and s...
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per sp...
Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and including water thinnable priming coat with cement primer after th...
Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface: Water thinnable cement primer to give an even shade after thoroughly brooming the surface to remov...
Finishing walls with water proofing cement paint of required shade :New work (Two coats applied @ 4.84 kg/10 smtr) to give an even shade after thoroughly brooming the surface to remove all dirt, dust,...
Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thoroughly cleaning oil, grease, d...
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and fo...
Earth work excavation for pipeline trenches in all kinds of soils by mechanical means above 600 mm (Depth upto 1.50m not exceeding 1.5m in width ) trench width as per drawing and technical specificati...
Providing and installing at site of work P.V.C. pipes including cost of pipes and specials and labour, including lowering into trenches, laying true to line, level and perfect linking at joints leak p...
Providing, Laying and Fixing of GI pipes conforming to IS 1239:1990 with latest amendments complete with GI fittings (excluding the cost of fittings) with cuts and threads wherever necessary, includin...
Constructing brick masonry chamber of internal dimension 450x450mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plaster...
Providing and fixing MS inspection door of size 60 cms x 60 cms, including MS frame made of 50x50x6mm angle, shutters made of 3mm thick MS sheets, with hinges, locking arrangements at top etc. includi...
Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. ...
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar
taps, 32 mm C.P. brass waste of standard pattern, including painting of
fittings and brackets, cutting and making good the...
Providing and fixing Pillar Cock made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete Class:.with all lead, lift, loading, unloading, labour, fuel, hire ...
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complet...
Providing and fixing PVC (S.W.R) Nahani Trap 10cms x 10cms with all fitting arrangements & all necessary accessories complete. with all lead, lift, loading, unloading, labour, fuel, hire charges of ma...
Providing and fixing M.S. fan clamp type I or II of 16 mm dia M.S. bar, bent to shape with hooked ends in R.C.C. slabs or beams during laying, including painting the exposed portion of loop, all as pe...
Providing and fixing circular/ Hexagonal cast iron or M.S. sheet box for ceiling fan clamp, of internal dia 140 mm, 73 mm height, top lid of 1.5 mm thick M.S. sheet with its top surface hacked for pro...
Supplying heavy gauge PVC conduit tpipe......mm dia..........mm thick confirming to IS2509 with suitable size bends, metal / PVC Junction boxes, adhesive paste etc., and running before concreting the ...
Supplying heavy gauge PVC conduit tpipe......mm dia..........mm thick confirming to IS2509 with suitable size bends, metal / PVC Junction boxes, adhesive paste etc., and running before concreting the ...
Supplying heavy gauge PVC conduit tpipe.mm dia.mm thick confirming to IS2509 with suitable size bends, metal / PVC Junction boxes, adhesive paste etc., and running before concreting the slab. The cond...
Supplying heavy gauge PVC Conduit Pipe....dia .......mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hook sand c...
Supplying heavy gauge PVC Conduit Pipe.dia .mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hook sand cement pla...
Supplying heavy gauge PVC Conduit Pipe....dia .......mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hook sand c...
Supplying and flush mounting teak wooden box with out front plank, made of not less than12mm thick wood, after due groove cutting, finishing with necessary cement plastering complete.(300 x 300 x 76 m...
Supplying and flush mounting teak wooden box with out front plank, made of not less than12mm thick wood, after due groove cutting, finishing with necessary cement plastering complete.(300 x 228 x 76 m...
Supplying and wiring adopting loop system in existing pvc conduit/ casing capping using 2x1.5 sqmm (phase&neutral) & 1x1.0 sqmm (earthwire) frls multi strand pvc insulated copper wire (confirming to i...
Supplying and wiring adopting loop system in existing pvc conduit/ casing capping using 2x1.5 sqmm (phase&neutral) & 1x1.0 sqmm (earthwire) frls multi strand pvc insulated copper wire (confirming to i...
Supplying and wiring adopting loop system in existing pvc conduit/ casing capping using 2x1.5 sqmm (phase&neutral) & 1x1.0 sqmm (earthwire) frls multi strand pvc insulated copper wire (confirming to i...
Supplying and wiring adopting loop system in existing pvc conduit/ casing capping using 2x1.5 sqmm (phase&neutral) & 1x1.0 sqmm (earthwire) frls multi strand pvc insulated copper wire (confirming to i...
Supplying capacitor type ceiling fan complete with downrod blades, shackle, canopies etc, for operatio non 230V, 50 cycles. Single phase AC supply conforming to ISS - 374-1979 and with double ball bea...
Fixing a ceiling / wall mounting fan of all capacities and all types, with necessary clamps and 'S' hook made out of 15mm dia MS rod, with 5A. ceiling rose of approved quality with necessary length of...
Wiring for lighting / power circuit using one of FRLS PVC insulated 1100V grade, multi strand copper wire with low conduct or resistance single core in open or concealed system of wiring with specifie...
Wiring for lighting / power circuit using one of FRLS PVC insulated 1100V grade, multi strand copper wire with low conduct or resistance single core in open or concealed system of wiring with specifie...
Wiring for lighting / power circuit using one of FRLS PVC insulated 1100V grade, multi strand copper wire with low conduct or resistance single core in open or concealed system of wiring with specifie...
Wiring for lighting / power circuit using one of FRLS PVC insulated 1100V grade, multi strand copper wire with low conduct or resistance single core in open or concealed system of wiring with specifie...
Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates.The box should be firmly flush mounted after due groove cutting in Brick / Stone/ C.C wall...
Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates.The box should be firmly flush mounted after due groove cutting in Brick / Stone/ C.C wall...
Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates.The box should be firmly flush mounted after due groove cutting in Brick / Stone/ C.C wall...
Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick / Stone/ C.C wal...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...
Supplying and fixing superior quality modular switch mounting poly carbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing ...
Supply of round/square recess/surface mounted rolling type
LED Down light with . W GU 10 LED Lamp Rib Fabricated
from diecast aluminium with white powder coated prewired to
mains connector & has swive...
Supplying and fixing regular MCB distribution boards on wall wood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase /3...
Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON / OFF, energy cross-3 with Short circuit breaking ca...
Earthing: Providing and fixing and wiring earth electrode for grounding circuits IC cutouts and other equipments on the meter board in the pit. The pits should be filled up with equal proportion of sa...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
KW-2 2865.doc
Tender Document • 2.56 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .