WBPWD/AE-NRSESD/NIQ-36/2024-25

Amount

Dismentling of old & damage wiring, tube light with fittings etc.

Supplying and fixing double door Horizontal TPN MCB Distribution board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment [D-10, 14] Incoming - 415V,63A, FPMCB Isolator (1-nos) [ D-5,6 ] (1-nos) Outgoing - 10KA, (C-characteristics) 6-32A, SPMCB (18-nos) [ D-6,7 ]

6 way [Legrand/ L&T]

Supplying and fixing double-door SPN MCB Distribution Board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment. [ D-9,13 ] Incoming - 230V,40A, DPMCB Isolator (1-nos) [D-5,6] Outgoing - 10KA, (C-characteristics) 6-32A, SPMCB (10-nos) [D-6,7]

2+10 way [Legrand/ L&T]

Supply and laying (on existing cable trey binding with suitable GI wire) of 1.1 KV grade 4 core 240 sq mm Al. armoured PVC/XLPE cable (Make-RR cable/Havells/polycab/KEI) as mentioned below as per choise of EIC.

Supplying and fixing 4 core 240 sq mm cable compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below[ F-4,7 ]

Distribution wiring in 1.1 KV grade 2x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) partly in 20mm size PVC rigid conduit 'FR' (Precision make) [for ceiling portion only] and in 19mm bore, 3mm thick polythene pipe [for horizontal & vertical run embedded in wall], with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, to light/fan/call bell points with Piano Key type switch fixed on MS CRC sheet metal (16 SWG) switch board on wall complete with 2 no. “Ph & N” copper bar incl. bakelite/ Perspex top cover 3 mm thick and incl. 175x100x65mm inspection box, making earthing attachment, painting the MS box and mending good the damages to original finish [only PVC Rigid Conduit on ceiling and remaining portion concealed]

a) On board [E-15,(a)]

b) Average ru 6 mtr E-15/ 5.(b)

c) Average ru 8 mtr E-15/ 5.(c)

d) Average ru 9 mtr E-15/ 5.(d)

Supply and Fixing 1.1 KV single core stranded 'FRLS' PVC insulated & unsheathed single core stranded copper wire(RR Cable/Finolex/ /Polycab/KEI) as approved by EIC) of the following sizes in 20mm/25mm/32mm the PVC Rigid Conduit 'FR' [Make-Precision] on wall, ceilling with saddle and other accessories as required and mending good damages to building works.

(a) 3x1.5 sqmm ECC [ E-9,1(b) & E-16,7(a) ]

(b) 2x2.5 sqmm+1x 1.5 sqmm ECC [ E-9,1(s) & E-16,7(a) ]

( c)2x6 sqmm+1x 4 sqmm ECC) [ E-9,1(y) & E-16,7(a) ]

( d) 4 x 16 sqmm + 2 x 10 sqmm ECC [ E-9,1(g1) & E-16,7(b) ]

Finishing of the PVC insulated wire ends by socketting with pin/ ring type copper sockets and insulated tapes etc., including supplying sockets, tapes. [ F-5,9 ]

(a) 2x2.5 sqmm+1x 1.5 sqmm ECC [ F-5,9(i)]

(c) 2x6 sqmm+1x 4 sqmm ECC) [ F-5,9(iii&ii)]

(d ) 4 x 16 sqmm + 2 x 10 sqmm ECC [ F-5,9(v&iv)]

Supply & Fixing of single LED Tube light fitting [Make - Philips cat no. TMC 501 P 1x T-LED / Crompton cat no. IGP131 LT8-16 / Wipro, cat no.WIO921208 /complete with 18/20 Watt LED tube lamps [Make - Philips Master LED tube model no.18W 865 T8 I 2100lm / Crompton cat no. LTT8-20 / Wipro cat no.- LL13-181-65SE ] with with 25 cm bellow the ceiling with 2 No. 20 mm dia EI conduit (14 SWG) supports fixed with “L” type MS clamp whose one side fixed on ceiling with sutable size 4 nos. and by 2x24/0.20 mm (1.5sqmm.) flexible copper wire of 1.10 mt. length.

Supplying & Delivery of Surface mounted 2'X2' square shaped LED light fittings of 36 Watt having minimum lumen output 110 lumen/Watt with IP65 protection. (Make -Philips-SM366C LED32-6500 PSU OD WH / Crompton cat no- LCTLSNE-36-FO-CDL

Supply & Fixing 240 V, 2nos, 6A plug socket with separate 2nos, 6 A Piano key type switch (Make:- Anchor) on sheet metal switch board embedded in wall incl. S & F 175x100x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required.

Supply & Fixing 240 V, 20A, plug socket with separate 20 A Piano key type switch (Make:- Anchor) on sheet metal switch board embedded in wall incl. S & F 150x100x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required. [E-6, 22]

Supply & Fixing 240 V, 6 A Piano key type Plug socket (Make:- Anchor) on sheet metal switch board incl. S & F 100x100x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/ perspex cover and making necessary connections as required. [E-4,11(a)] & [E-5,15(a)]

Supply & Delivery of AC 250V,18'' Inch(450mm) dia,1370 RPM doubal ball bearing full metal body wall bracket fan. [Make: EPC/Colour-Brown]as directed by EIC.

Supplying & Delivery of 250 volts, 50Hz, 12'' sweep 1420 R.P.M. heavy duty exhaust fan complete with all accessories after making hole on wall and mending good damages as per practicable incl.(Make-EPC) as to Gs.

Rate should be quoted incl. of all taxes and cess.

Defect Liability period : 1 year

STANDARD BUILDERS (BID ID -5536693)

Messrs HI- Q - ENTERPRISE (BID ID -5518671)