DAY TO DAY B/R MAINTENANCE SERVICES AND INTERNAL WATER SUPPLY AT AREA I UNDER AGE B/R WEST COLABA, MUMBAI

Amount

Carrying out maintenance of plumbing complaints by engaging One plumber (skilled) with T & P for general day to day all plumbing complaints (from 0900 hours to 1700 hours), for day to day repairs to WHB & WC with connections and fittings like as leaking bib taps, pillar taps, mixers, stop cocks by tightening and providing washer, repair to float valves, repairs to internal assembly low level cistern by adjustments, etc, repairs to internal leakage and brokage of GI and PVC pipelines as required at site to cater the satisfaction of user as assigned, with and including all minor spare parts, material & labour complete all as specified and directed. Note :- (a) Rate inclusive of complaints upto 13th floor of the building and removing rubbish upto a distance of 250 m outside the periphery of the area. (b) One Plumber and one helper/mazdoor shall be detailed daily for area of AGE B/R (West) Colaba for the purpose of rendering all plumbing complaints through out the contract period. In case of failure to deploy man power for any reason whatsoever may be, necessary penalty will be levied as specified in respective PS Clause. (c) In case of urgent complaint shall be rectified within three hours from the time of intimation. (d) The rates quoted shall be deemed for attending day to day complaint and make functional the entire complaints on a daily basis at area of AGE B/R (West) Colaba. Note :- Contractor has to attended daily complaint for particular day otherwise penality fo Rs 1000/- per day will be leived on contractor.

Carrying out maintenance of Carpenter complaints under area of AGE B/R (West) by engaging one carpenter (skilled) with T & P for general day to day carpenter complaints (from 0900 hours to 1700 hours), such as door/window easing, refixing of old aluminium mongery, hinges, tower bolt, handles, curtain rod, wiremesh etc in situ. with and including all minor spare parts, material & labour complete all as specified and directed. Note :- (a) Rate inclusive of complaints upto 13th floor of the building and removing rubbish upto a distance of 250 m outside the periphery of the area. Note :- (a) Rate inclusive of complaints upto 13th floor of the building and removing rubbish upto a distance of 250 mtrs outside the periphery of the area. (b) One carpenter and one helpler/mazdoor shall be detailed daily for AGE B/R West area for the purpose of rendering the Carpenter complaints through out the contract period. In case of failure to deploy man power for any reason whatsoever may be, necessary penalty will be levied as specified in respective PS Clause. (c) In case of urgent complaint shall be rectified within three hours from the time of intimation. (d) The rates quoted shall be deemed for attending day to day complaint and make functional the entire Carpenter complaints on a daily basis at AGE B/R West area. Note :- Contractor has to attended daily complaint for particular day otherwise penality fo Rs 1000/- per day will be leived on contractor.

S&F in repairs 4mm thick panel of any type, pattern and shape Aluminium Composite Panel (ACP), aluminium thickness of 0.5mm, Front side finish of aluminum roll coated with Plain / coloured / wooden texture PE / PVDF, Core material of Non-toxic polyethylene, Macromolecular lamination film, Rear side of Aluminum coated with primer and including frame work using of Fasteners, including concealed screws, nuts, bolts and other items required for connecting aluminium to aluminium / steel / wooden / ply board, Blind rivets all fixing anchors, brackets and similar attachments used in the erections, shall be of aluminium, non-magnetic stainless steel, zinc coated steel, for fixing in both internal / external wall cladding complete weather proofing sealant of a polyurethane elastic joint / structural silicone sealant / pre-formed gaskets to the Horizontal & Vertical Joints in the Aluminium cladding / facade as per manufacturer's instructions all as specified and directed. Note : 1. The unit rate quoted is deemed to be inclusive of all necessary fixing acceserries mentioned in the description of work and scaffolding works at any height for installation. 2. For payment purpose panels areas will be measured on one side only.

S&F in repairs of SS 304 Grade metal letters of height 200mm with PU paint to match the logo colours, mirror polish finish, anti rust and including necesssary arrangements to fixing in walls, using scaffolding at any height all as specified and directed.

S&F in repairs 9 feet pulley operated cloth drying system, aluminium anodised 20mm dia pipes, chanel assembly, locking system to hide rope knot, ropes 4 mm dia HDPE double core & fitting material all as specified and directed.

S&F in repairs 6 feet pulley operated cloth drying system, aluminium anodised 20mm dia pipes, chanel assembly, locking system to hide rope knot, ropes 4 mm dia HDPE double core & fitting material all as specified and directed.

S&F in repairs for door bottom sealing strip guard/door gap file/door strip any colour fixed all as specified (minimum wt. 90gms) all as specified and directed.

M&L in repairs brick work with sub class 'B' bricks straight or curved on plan exc 6 m mean radius built in CM (1:6) all as specified and directed.

M&L in repairs Non Skid coloured ceramic tiles 7 to 8 mm thick (Square / Rectangular) area of each tile exc 0.06 sqm but not exc 0.11sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shades of the tilles all as specified and directed.

M&L in repairs coloured glazed digital ceramic wall tiles 300x450x7mm / 300mm x 600mm x 7mm thick in vertical surfaces such as skirting and dados set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of tiles all as specified and directed.

M&L in repairs coloured double charged polished glazed vitrified tiles 10 mm thick (Square / Rectangular) area of each tile exc 0.36 sqm but not exc 0.42 sqm in floors, set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of tiles all as specified and directed.

M&L in repairs coloured double charged polished glazed vitrified tiles 10 mm thick (Square / Rectangular) polished area of each tile not exc 0.36 sqm but not exc 0.42 sqm in vertical surfaces such as skirtings and dados set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of tiles all as specified and directed.

M&L 15mm thick screed bed or bedding layer in cement mortar (1:6) for laying floor finishes like tiles all as specified and directed.

Demolition of cement Concrete of any description and in any position not otherwise specifically provided for all as specified and directed.

M&L rendering 10 mm thick in CM (1:4) on fair faces of brick work all as specified and directed.

M&L for PCC 1:2:4, type B1 (using 20 mm graded crushed stone aggregate) as in foundation of poles, filling and mass concrete all as specified and directed .

M&L 50 mm thick PCC 1:2:4 type B1 (using 12.5 mm graded crushed stone aggregates) as in floor finished surfaces of cement concrete even and smooth using extra cement all as specified and directed.

Demolition of stone slab and tiles of any description or thickness in floors, aprons, dados etc laid, bedded and pointed in any mortar and removal of rubbish off the site all as specified & directed.

M&L for granite (of any colour) 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixure of pigment to match the shade of granite stone including grinding and polishing as in kitchen platform, counter for wash basin, flooring and all other similar works including 15mm thick screed bed in CM 1:6 all as specified and directed.

M&L for granite (of any colour) 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixure of pigment to match the shade of granite stone including grinding and polishing as in skirting, steps, risers, wall dado and similar works and all other similar works including 15mm thick screed bed in CM 1:4 all as specified and directed.

S&F in repairs 20 mm thick, machine cut, Kota stone slab, as in floors, steps, landing etc. set and jointed in neat cement slurry and pointed in coloured cement to match the shade of slab, including cutting, grit polishing followed by wax with and including 20mm thick screed bed in CM 1:4 all as specified and directed.

All as per item No 20 above but as in skirting/ riser/ dado etc with and including 10 mm thick backing coat in CM 1:3 all as specified and directed.

M&L heavy duty durable parking tiles any shape and size and colour in floors etc. with and including 50 mm thick in CM (1:6) bedding set and jointed in neat cement slurry and pointed in coloured cement to match the shade of the tiles as specified and directed.

Taking down and refixing of old 15 mm dia steel tubing including fittings in positon walls, ceiling and floor etc. complete all as specified and directed

S&F in repairs GI tubing 15mm bore medium grade with all fittings IS 1239 (PART 1) : 2004 and fixed complete to wall and ceiling or laid in floors all as specified and directed.

Taking down and refixing of old 20 mm dia steel tubing with fittings including cleaning in positon walls, ceiling and floor etc all as specified and directed

S&F in repairs GI tubing 20 mm bore medium grade with all fittings IS 1239 (PART 1) : 2004 and fixed complete to wall and ceiling or laid in floors all as specified and directed.

Supplying and laying of CPVC pipes 20 mm SDR 11 & Plain CPVC SDR 11 with all fittings laid in wall, floor, trenches and celling including taking down all as specified and directed

Supplying and laying of CPVC pipes 16 mm SDR 11 & Plain CPVC SDR 11 with all fittings laid in wall, floor, trenches and celling with taking down all as specified and directed

Cutting chases, pinning in and making good to facing on brick walls where required and pointing in cement mortar (1:3) to ends for concealed water tubing and making good, cutting n, exc. 10cm girth all as specified and directed.

S&F in repairs Vitreous China wash down water closet pan (Pedestal pattern) white, including trap and connection to drain and flushing pipe (excluding flushing cistern) including seat cover with flat bottom and mild steel chromium plated or aluminium hinging devices for pedstal pan all as specified and directed.

S&F in repairs vitreous China wash basin of any colour, flat back of any size including cutting for pinning in ends of brackets all as specified and directed.

S&F in repairs counter sunk wash basin oval shape 550x460mm fixed with waste coupling & waste pipe & accessories of any size all as specified and directed.

S&F in repairs 10 litre capacity PVC low level flushing cistern with all accessories complete fixed with WC including syphone pipe, PVC flushing pipe of any size all as specified and directed.

S&F in repairs Two piece EWC water closet CAMPBELL Two Piece EWC 655 X 370 x 770 mm including Cistern, Soft Close Seat Cover and Twin Flush Fittings complete fixed with waste coupling and waste pipe of any size all as specified and directed.

S&F as in repairs 15 mm bore fancy type angular valve cast copper alloy screwed down, high pressure, with crutch or butter fly handle, screwed both ends for iron pipe or for unions all as specified and directed.

S&F as in repairs 15 mm bore fancy type concealed stop cock (regular body) cast copper alloy screwed down, high pressure, with crutch or butter fly handle, screwed both ends for iron pipe or for unions all as specified and directed.

S&F as in repairs PVC connection 15mm size PTMT nuts of length 450 mm all as specified and directed.

S&F as in repairs Stainless steel waste coupling for wash basin/ urinal/kitchen sink all as specified & directed .

S&F in repair waste pipe for wash basin/ urinal/kitchen sink all as specified & directed .

S&F as in repair 15 mm bore fancy type bib taps long body cast copper alloy chromium plated, screwed down, screwed for iron pipe or for brass ferrule all as specified and directed.

S&F in repairs 15 mm bore, fancy type, wall mixer, brass chromium plated with 115 mm long bend pipe for connection to overhead shower (with bush and piston Divertor fittings) with aerator all as specified and directed.

S&F in repairs brass chromium plated, fancy type, 15 mm bore basin mixture or sink (central hole or wall mounted) with 'U' shaped round casted spout with 3" long pipe connection with aerator all as specified and directed.

S&F in repairs 15 mm bore, brass chromium plated, fancy type health faucet with SS connection pipe 1 metre long all as specified and directed.

S&F in repairs fancy type CP Towel Rail 61 cm long all as specified and directed.

S&F in repairs CP Towel Ring all as specified and directed.

S&F in repairs CP soap dish all as specified and directed.

S&F in repairs CP toilet paper holder all as specified and directed.

S&F in repairs Premium CP Towel rack for bathroom /towel stand /hanger/bathroom (24 in-chrome) all as specified and directed.

M&L in repairs for 15 mm bore fancy type Sink brass mixer with flexible neck dual flow hot/cold facility chrome tap cast copper alloy 15mm bore with fancy chromium plated screwed down, screwed for iron pipe or for brass ferrule all as specified and directed.

M&L in repairs for 15 mm bore fancy type CP Sink flexible sink tap dual flow chrome tap cast copper alloy 15mm bore with fancy chromium plated screwed down, screwed for iron pipe or for brass ferrule all as specified and directed.

S&F in repairs 15 mm bore fancy type sink cock (wall mounted) with 150mm (6") long swivel spout, wall flange and provision for WP connection, cast copper alloy 15mm bore with fancy chromium plated screwed down, screwed for iron pipe or for brass ferrule all as specified and directed.

S&F in repairs 8mm thick glass shelf having size of 56 cms x 13 cms with chromium plated L-bracket with min of 8 cm long below WHB mirror all as specified and directed.

S&F in repairs 15 mm bore overhead shower single flow (ABS body chrome plated with grey face plate) with rubit cleaning system including shower arm 240 mm long (light weight) round shape with wall flange all as specified & directed.

S&F as in repairs grating round 100mm size of PTMT (minimum 25 gms) all as specified and directed.

S&F as in repair SS grating round 100mm size all as specified and directed.

S&F in repairs 15 mm bore pillar taps cast copper alloy, with capstan heads, chromium plated, screwed down, fancy type, high pressure, swan neck with or without lettered 'HOT or COLD' with long screwed sunk and fly nuts all as specified and directed.

S&F in repairs water closet seat cover any coloured pattern with flat bottom and mild steel chromium plated or aluminium hinging devices all as specified and directed.

S&F in repairs Kitchen sink with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes including bedding in cement morter to dwarft wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm, bowl size 410 mm x 330mm x 160mm (or nearest size as per Cat Part specified).

S&F in repairs Kitchen sink without drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes including bedding in cement morter to dwarft wall or including fixing cantilever brackets and connecting union to pipe overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm (or nearest size as per Cat Part specified).

S&F in repairs PVC cabinet mirror of size 300 x 450 mm all as specified and directed.

M&L in repairs 75 mm dia PVC (SWR) floor trap with grating including jointing with solvent cement all as specified and directed.

S&F in repairs of vitreous China squatting pan, ' Orissa patteren, size 580 x 440 mm white, with integral footrests (excluding flushing cisteren and flush pipe) all as specified and directed.

S&F in repairs 15 mm bore gun metal gate valve cast copper alloy, screwed down high pressure with wheel head, screwed both ends with crutch or butterfly handle for iron pipes all as specified and directed.

S&F in repairs 20 mm dia gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe all as specified and directed

S&F in repairs Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe all as specified and directed.

M&L for Ready mix plaster for internal rendering 15 mm thick in two coats of 10 mm base coat and 5 mm finishing coat on brick wall or concrete surfaces including taking down off old cement plaster and cement mortar including use of scaffolding and removing debris outside MD land all as specified and as directed.

M&L for preparation of new plastered surfaces and applying two coats of oil bound distemper over a coat of alkali resistant priming paint over 2mm thick (average) birla war care wall putty all as specified and directed.

M&L for 5 mm thick plaster in CM (1:3) on ceiling surfaces and finished the surfaces even and smooth without using extra cement including use of scaffolding and removing debris outside MD land & including taing down all as specified and directed.

M&L for preparation of newly plastered ceiling surfaces and applied three coats of white wash all as specified & directed.

S&F in repairs 2.00 mm thick PVC sheet laminated plain coloured, marbled mosaic or mottled finish of any colour laid with approved rubber based adhesive in floors after preperation of floor surface all as specified and directed.

Taking down chowkats or frame with shutter (without taking off shutter from the frame) area exc 1.5 sqm but n exc 4 Sqm each all as specified and directed.

Taking down chowkats or frame with shutter (without taking off shutter from frame) area n exc 1.5 sqm each all as specified and directed.

Taking down shutters of any description area n exc. 1.00 sqm each all as specified and directed.

Taking down shutters of any description area exc. 1.00 sqm but n.exc. 2.00 sqm each all as specified and directed.

Taking down shutters of any description area exc. 2.00 sqm each all as specified and directed.

Taking down Chowkhats or frames area exc 1.50 sqm but n exc 4.00 sqm each all as specified and directed..

S&F in repairs powder coated (50 micron) aluminium frame/shutters for partition, doors, windows, ventilators etc. including joining cleat for fixing, PVC rollers, locking arrangement, rubber beading, rubber gasket, glazing, screws, handles, hinges, tower bolts all as specified and directed. Note :- (i) The rate quoted shall be inclusive of the cost of neoprene beading, glazing pin. screws and powder coated fittings such as hinges, handles, locking arrangement etc as required, which shall not be measured for arriving the weight. (ii) Item shall be paid as per weight of aluminium section. (iii) The rate shall also be inclusive of complete packing with silicon gel around contacting surfaces of aluminium work, and including matching the existing surface area.

S&F factory made 35 mm thick 2nd class hard wood plain framed panelled shutters (any panel) with lock rail and panel of 9mm thick B.W.P commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS :1003(Part-I) kiln seasoned and chemically pressure treated all as specified and directed.

S&F 2nd class hard wood 35mm thick Glazed and skelton shutters, open rebated and prepared to receive glass, gauge, etc. (without sash bars) edges of framing plain, chamfered or rounded, fittted with cut and mitred beads for securing gauge, etc. sizes of member of shutter as specified SSR part-I Section 8 clause 8.24 (a) and fitted to chowkhats all as specified and directed.

S&F 2nd Class hard wood Glazed and skelton shutter 30mm thick open rebated and prepared to receive glass, gauge, etc. with sash bars divided into square with plain chamfered or rounded mitred and rebated sash bars any member as in windows ventilator stilles and rails provided as per SSR part -I Sector 8 clause 8.24 (b) all as specified and directed.

S&F 2nd class hard wood plain, solid, straight chowkhat and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joint all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames glazed with putty or fixed with beads including any height of building and scaffolding all as specified & directed .

S&F 3mm thick glass sheet ordinary quality and glazing with oil putty fixed with beads n.exc 0.5 SQM in EACH pane including any height of building and scaffolding all as specified & directed.

M&L for 5.50 mm thick sheet glass, ordinary quality and glazing with oil putty or with wooden beading in squares n exc 0.50 sqm in each pane all as specified and directed.

M&L for 5.50 mm thick figured glass, pin head type and glazing with oil putty or with wooden beading in squares n exc 0.50 sqm in each pane all as specified and directed.

S&F 40 mm thick flush shutters, solid core construction, with block board core and ply wood face panels, both faces is covered with decorative face veneer with clipping/frame to match on both side all as specified and directed.

M&L two coats of french polishing on wooden surfaces of any description width or girth including cleaning and prepairing the surfaces including a coat of wood filler on old surfaces all as specified and directed.

M&L for preparation of new wood or wood based surfaces, of any description, not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer all as specified and directed.

M&L in repairs for 18/19 mm thick Pre-laminated Plywood, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, including 1st class teak wood lipping over cut surfaces, fixed with nails to timber work as in kitchen cup board shutters, shelves and all other similar works all as specified and directed.

S&F stainless steel pressed handles, oval type, designer of 150 mm size for doors all as specified and directed.

S&F extruded aluminium alloy handles 150 mm, fabricated type, anodized all as specified and directed.

S&F extruded aluminium alloy barrel tower bolts, st, with bright bolt and fixed of size 200 mm for doors all as specified and directed.

S&F aluminium anodised, barrel tower bolts of extruded section and fixed of 150 mm size all as specified and directed..

S&F butt hinges of size 100 mm, medium weight, stainless steel min 3 mm thick for doors of design all as directed by Engr-in-Charge

All as per item No 95 above but of size 75 mm L-type all as specified and directed

S&F aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed of 300 mm size all as specified and directed.

S&F designer stainless steel drawer handles, projection drop (50mm to 65mm) on screwed plate all as specified and directed.

S&F in repairs Hasp and staple safety type stainless steel with steel hinge pin including bolt to hinge plate of 100mm size and fixed with screws all as specified and directed.

S&F in repairs 150 mm long aluminum, anodised, barrel tower bolt of extruded section all as specified and directed.

S&F in repairs for 75 mm long aluminum, anodised, barrel tower bolt of extruded section all as specified and directed.

S&F in repairs 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy all as specified and directed.

Taking down any size of door, window repairs & refixing in same opening all as specified & directed Note- Iron mongry will be paid separetly

S&F in repairs 100 mm size butt hinges, medium weight, cold rolled mild steel all as specified and directed.

S&F in repairs 75 mm size butt hinges, medium weight, cold rolled mild steel all as specified and directed.

S&F in repairs mild steel 300 mm, ordinary rat tail rod patteren springs, including roller and roller plate all as specified and directed.

S&F in repairs 150 mm size extruded aluminium alloy handles, fabricated type anodised pattern/design as approved all as specified and directed.

S&F in repairs 75 mm size extruded aluminium alloy handles, fabricated type anodised of pattern/ design as approved all as specified and directed.

S&F in repair brass 7 levers mortice night latch, size 100 mm including safety chain all as specified and directed.

S&F in repairs brass hat and coat hooks, solid body, 175 mm to 250mm all as specified and directed.

S&F in repairs aluminium plate type II gate and shutter, hooks and eyes 200 mm size all as specified and directed.

S&F in repairs 40 mm dia, cupboard knobs fixed with nut, screws and washer of brass, polished all as specified and directed.

S&F in repairs 150 mm size floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor all as specified and directed.

S&F in repairs aluminium (extruded section body) door closer hydraulically regulated designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg all as specified and directed.

S&F in repairs stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples over wooden beading all as specified and directed.

S&F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples over wooden beading all as specified and directed.

S&F in repairs Aluminium woven wire mesh sheet cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples and wooden beading all as specified and directed. Note :- Rate inclusive of fixing wire cloth in wooden as well as in aluminium frame .

S&F in repairs 25mm dia stainless steel decorative type curtain rods chromium plated anodised aluminium all as specified and directed.

S&F in repairs 20 mm dia aluminium anodised powder coated curtain rods and all other connected works all as specified and directed.

S&F in repairs curtain brackets, 25mm dia, decorative/ fancy type, made of brass all as specified and directed

M&L in repairs for 25 mm thick block board, interior grade with pre-lminated decorative face veneer on both faces fixed with nails to timber work as in kitchen cup, shelves, board shutters and all other similar works including 1st class teak wood lipping over cut surfaces all as specified and directed.

M&L Anodized Aluminium grill with and including suitable aluminium anodized 25 to 30 micron E/H section frame, 1.5mm thick as required with aluminium riveted/ screwed attachment all as specified and directed.

S&F in repairs 12mm thick, toughened glass for door shutters, partitions in bathroom or other places, shelves, table top and in similar work with and including fitting and fixtures such as glass handles ss studs, fittings for door pivots all as specified and directed .

S&F SS 202 Stain finish Handle D type, 25mm dia 600mm long for glass shutter all as specified and directed

S&F bottom/top patch fitting for pivot all as specified and directed

S&F bottom lock patch fitting all as specified and directed

Dismantling boarding, any description, fixed in any position with nails all as specified and directed.

M&L 6mm thick ply wood, grade BWR, type BB fixed with screws to timber frame work for cupboards all as specified and directed.

S&F in repairs for 300mm, helical door spring rod pattern springs including roller and roller plate complete heavy duty and fixed all as per manufacturer's instruction all as specified and directed.

S&F in repairs for double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed all as per manufacturer's instruction all as specified and directed.

S&F in repairs Roller blinds horizontal and vertical type made out of standard fabric, thickness 2mm of approved texture with necessary accessories etc. (sample as approved by GE) all as specified and directed.

S&F in repairs bib taps 15mm bore standard of PTMT any colour high pressure screwed for iron pipe and fixed all as specified (minimum wt. 90gms) all as specified and directed.

M&L for epoxy grout to fill the wide joints of tiles and pointed in matching colour of epoxy grout ( MYK LATICRETE SP 100 or equivalent) floor and wall finishes all as specified and as directed by Engineer-in-charge.

M&L for Stainless Steel grade 306 decorative designer railings, staircase, covers, sitting place, shed etc. (design and pattern as approved) made out of SS pipes mirror or wire brush finish, SS flats (plane or chequered) & SS plates cutting to desired shape,1D Finish with and including required cutting, notching organ welding, riding and drilling counter sunk holes, as required and bending to required shape by mechanical means in factory as per site requirement without forming wrinkles and butting and buffing / polishing fixing with necessary nut bolts and fixtures and filling the holes with mircro concrete all as directed by Engineer-in-Charge.

SRI SAIRAM COUNSTRUCTION

NATH CONSTRUCTION

HINDUSTAN BUILDERS

Sachin santosh dalvi

SHIV ENTERPRISE

SAHI SAGAR ENTERPRISES

N.S.ENTERPRISES

SHRI SAI ENTERPRISES

Bidder Name

HINDUSTAN BUILDERS

Frends Enterprises

SRI SAIRAM COUNSTRUCTION

NATH CONSTRUCTION

SHRI SAI ENTERPRISES

Sachin santosh dalvi

SAHI SAGAR ENTERPRISES

SHIV ENTERPRISE

N.S.ENTERPRISES