Providing 4 nos. IP based outdoor CCTV cameras, 5 nos. telephone units, 3 nos. Air conditioning units, supply and laying of power cables, shifting of High mast and DG set at Toll Plaza and Administrative Block at new MPA Gate No.9

Amount

PART-I: Providing 4 nos. IP based outdoor CCTV cameras

Supply, Installation, testing and commissioning of IP based bullet 4MP outdoor type Camera as per technical specification at Scope of Work.

Supply

Installation, testing and commissioning

Supply, Installation, testing and commissioning of Network Video Recorder of minimum 8 Channel along with 4TB Hard disk for recording and storage as per technical specification at Scope of Work.

Supply

Installation, testing and commissioning

Supply, Installation, Testing and commissioning of 32” Display monitor as per technical specification at Scope of Work

Supply

Installation, testing and commissioning

Supply, installation , Testing & Commissioning of 8 Port 10/100/1000 Giga port switch as per technical specification at Scope of Work

Supply

Installation, testing and commissioning

Supply, Installation, testing and commissioning of Wireless Transmitters and Receivers (AP) with complete accessories, antennas, Power supply units, fitting arrangements, etc as per technical specifications at Scope of Work

Supply

Installation, testing and commissioning

Supply, Installation, testing and commissioning of 6 meter lattice Tower with Self climbing ladder as per technical specification at Scope of Work

Supply

Erection and commissioning

Supply, Installation, Testing & Commissioning of 1 KVA online UPS as per technical specification at Scope of Work

Supply

Installation, testing and commissioning

Supply of CAT 6 Indoor Cable as per Technical specification at Scope of Work

Supply and Laying of Suitable size casing capping for CAT-6 cable, power cable as per technical specification

Supply

Laying along the wall/ceiling etc

Supply and Installation of Rack

Supply

Installation

Accessories like screw, clamp, bends, PVC power cable, Switch Socket, RJ45 etc.

Configuration of all equipment, supervision and documentation

PART-II : Providing TELEPHONE Lines as per Scope of Work

Supply, Installation testing, commissioning and handing over of Telephones.

Supply

Installation, testing and commissioning

Supply, laying, commissioning and handing over of 100 pair telephone cable including supply and laying of bricks along the length of cable.

Supply

Laying in existing trench by opening the RCC covers and closing back

Laying in Road/Ramp crossing (Excavation & pipes will be provided by Port)

Laying in the existing trench and backfilling the trench.

Laying by clamping along the existing wall.

Supply, laying, commissioning and handing over of 50 pair telephone cable including supply and laying of bricks along the length of cable.

Supply

Laying in existing trench and back filling the trench.

Supply, Installation, testing, commissioning and handing over of 24 Port extension card for remote shelf.

Supply

Installation, Testing and Commissioning

Supply Installation, testing, commissioning and handing over of outdoor PVC Junction Boxes

Supply

Installation

Supply Installation, testing, commissioning and handing over of 100 pair Crones as per standard design.

Supply

Installation

Supply Installation, testing, commissioning and handing over of 50 pair Crones as per standard design.

Supply

Installation

Supply, laying, testing, commissioning and handing over of 5 pair telephone cable.

Supply

Installation

Supply and Laying of Suitable size casing capping for laying 5 pair cable

Supply

Laying along the wall / ceiling etc.

Supply of single line Rosette Boxes

Accessories like screw, clamp, bends, PVC power cable, Switch Socket, RJ45 etc.

PART-III: Providing Air-Conditioners as per Scope of Work

Supply, installation, testing and commissioning of 1.5 TR Split invertor air-conditioner 5 star rated, single phase. including all accessories, voltage stabilizer and as per Scope & technical specification.

Supply

Installation, testing and commissioning

PART-IV : Providing Power Cable as per Scope of Work

Excavation of trench in hard soil 1.0 meter deep and 0.6 meter width in hard soil and Back filling of trench.

Supply of 4 corex120 sq.mm LT, 1.1 KV grade aluminium XLPE armoured cable.

Supply of 4 corex35 sq.mm LT, 1.1 KV grade aluminium XLPE armoured cable.

Laying of LT cable of size 4 core x 120 sq.mm

In RCC trench

In excavated trench

Through GI pipes at road crossing

Clamping on wall with GI sadles

Laying 2 runs of LT cable of size 4 core x 35sq.mm in trench provide by the Port.

Providing GI pipe earthing as per scope of work

End Termination of LT 4 core x 120 sq.mm cables by providing suitable glands and lug.

End Termination of LT 4 core x 35 sq.mm cables by providing suitable glands and lug.

PART-V : Shifting of High Masts as per Scope of Work

Design and casting of suitable foundation for the High mast confirming to SBC results. The foundation Height of the High mast shall be 500mm above the existing nearby ground level

Design & construction of Protection Guard/Fencing surrounding the high mast with suitable size MS channel and MS angles as per the Technical specifications

Installation and commissioning of the existing high mast control panel by terminating the required cables such as Incomer, lighting and motor. Work also including supply and fixing of required materials such as glands lugs etc. complete in all respect.

Providing RCC/Stone masonry foundation complete in all respect including plastering for the High Mast control Panel and the dimension .The gap between the pillars is 350 mm for cable connection to the control panel. The foundation starts 300mm below the ground after making 100mm stone soling and height of the foundation 750mm above the ground level and curing etc. and the panel should be stand on the well grouted Stainless steel bolts. The work shall be complete in all respect.

Fixing of 16 no LED flood light luminaries Fittings , junction box with complete wiring work on existing high mast lantern carriage (Fittings and Junction boxes will be provided by the Port)

Erection, testing and commissioning of 30 mtrs high mast complete in all respect with the help of suitable equipment’s

Supply of 5 core 4 sq mm copper trailing cable . The cable shall be EPR insulated and PCP sheathed to get flexibility and endurance with Rodent proof coating

PART-VI : Shifting & Re-Installing of DG Sets

Dismantling ,Shifting\ transportation and re-installation of Diesel Generator (DG) set along with chimney and other accessories including Civil \electrical related works from existing place (shed at near gate no. 9) to location near T3 shed and successful recommissioning of DG set as per the Scope of work.