Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹45.9 LAccepted-AOC WARD NO 1 CALICUT PORT BLAIR SOUTH ANDAMAN 744105 | SOUTH ANDAMANS | ANDAMAN AND NICOBAR ISLANDS | 744105 | L1 | Accepted-AOC Lowest | |
| 2 | L2₹46.9 L+₹25,825 (0.55%)Rejected-Finance | L2 | Rejected-Finance Not Lowest | |
| 3 | L3₹48.1 L+₹1.5 L (3.22%)Rejected-Finance | L3 | Rejected-Finance Not Lowest | |
| 4 | L4₹49.4 L+₹2.8 L (5.92%)Rejected-Finance | L4 | Rejected-Finance Not Lowest | |
| 5 | L5₹51.7 L+₹5.0 L (10.8%)Rejected-Finance | L5 | Rejected-Finance Not Lowest |
Tender Value
₹47.6 L
EMD Value
₹95,200
Closing Date
27 Jan 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer Haddo
GARRISON ENGINEER HADDO Military Engineer Services Haddo Post Port Blair Andaman and Nicobar 744102
PROVISION OF MEDITATION / YOGA CENTRE AT INS JARAWA AND REPAIR / REPLACEMENT TO RUSTED WATER PIPE LINES AT TRV UNDER GE HADDO, PORT BLAIR
2023_MES_573731_1
8715/GE/H/PB
Open Tender
Civil Works
Item Rate
180 days
GE Haddo Port Blair
Class D and Category a(i) and a(ii)
9 documents required · 9 mandatory
₹500
GE Haddo
₹95,200
Yes
2 Mar 2023
7 Jan 2023
30 Jan 2023
7 Jan 2023
27 Jan 2023
21 Jan 2023
9 Jan 2023 - 16 Jan 2023
Amount
Excavation in post holes (or similar holes) each n.exc 0.5 Cum getting out, returning, filling in and well ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm each as in hard / dense soil complete all as specified and as directed.
Excavation in trenches not exceeding 1.5 mtr wide and not exceeding 1.5 m in depth, for foundation of poles, stays, struts or for laying cables/pipes etc., not exceeding 10 Sqm on plan and not exceeding 1.5m in depth and getting out in hard/dense soil complete all as specified and as directed.
Excavation in trenches not exceeding 1.5m wide and exceeding 1.5m deep and not exceeding 3m deep for foundation of poles, stays and struts and getting out in hard/dense soil complete all as specified and directed.
M&L PCC (1:4:8) type D2 using 40mm graded stone aggregate as in foundation filling and mass concrete complete all as specified & directed by Engineer-in-Charge.
Returning filling in incl spreading, levelling, watering and well ramming in layers n. exc. 25 m in soil complete all as specified and directed.
Removal excavated soil to a distance n. exc. 50m and deposited where directed at a level n. exc. 1.5 m above the starting point complete all as specified and directed.
M&L PCC (1:2:4) type B1 using 20mm graded stone aggregate as in foundation filling and mass concrete complete all as specified & directed by Engineer-in-Charge.
M&L for pre-cast cement concrete block masonry and for supporting pillars of pipeline with solid blocks made up of (1:3:6) type C1 (using 20mm graded stone aggregate), masonry exceeding 10cm in width and setting in cement mortar (1:6) complete all as specified and directed.
M&L for rendering 15mm thick in two coats 5mm thick in CM (1:4) mixed with integral water proofing compound @ 3% by weight of cement over 10mm thick in CM (1:6) on fair faces of brick work or concrete, surfaces finished fair and even complete all as specified and as directed. NOTE: The rate of Water proofing compound shall be deemed to be included in quoted rate.
M & L Rendering 10mm thick on fair faces of brick work or concrete surfaces finished with even and smooth without using extra cement in CM 1:6 complete all as specified and directed.
M&L for preparation of newly plastered surfaces of walls and applying two coats of distemper oil emulsion over a coat of primer complete all as specified and as directed.
M&L for preparation of newly plastered surfaces and applying two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified and as directed
M&L for sand (river sand) filling under floors or in foundations spreading and levelling in layers not exceeding 25cm thick including watering and consolidation complete all as specified and as directed.
S&F of UPVC/fibre false ceiling of panel (not less than 1mm thickness) sizes of 340mm x 2700mm / 300mm x 2500mm, durable and resistant to moisture, water and borer-fungus-termite attack. Panel to be installed with GI sections of sutable guage & size according to site conditions. Panels fixed using with suitable trims for edge profiles and for connecting profiles. Panels must be maintenance free, rust proof and are 100% Water proof complete all as specified and sample kept in the office of the Engr-in-Charge. Make : Prominance or equivalent as approved by GE. Note : (1) GI grid work of false ceiling will be measured and paid separately. (2) Colour and pattern of false ceiling boards to be approved by GE.
S&F frame work of seamless ceiling comprising of GI perimeter channel of 0.55mm thick with two unequal flange of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm c/c intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm c/c with GI cleats and steel expansion fasteners with and incl ceiling section (not exc 1.2m length) of 0.55mm thick having jurled web of 50mm an flange of 26mm each with lips of 10.5mm fixed to the intermediate channel with connecting across the intermediate channel at 457mm c/c incl hangers 6mm dia GI adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40x3mm size 60mm long and expansion hold fastners 12.5mm dia 40mm long complete all as specified and directed.
S&F for 110mm dia PVC (SWR) single socketed pipes in any length complete with rubber ring joints fixed to wall etc using synthetic rubber adhesive cement solvent complete all as specified.
Demolition of cement concrete (un reinforced) in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) complete all as specified and as directed.
M&L for hardcore using broken stone or boulders of gauge not exceeding 63 mm, deposited, spread and levelled in layers not exceeding 15cm thick, watered and rammed to a true surface complete all as specified and directed.
M & L for 100mm thick PCC (1:4:8) type D-2 (using 40 mm graded stone aggregate) as in sub base complete all as specified and directed.
M&L for 25mm thick cement concrete type (1:2:4) type B1 (using 20mm graded stone aggregate) as in sub base complete all as specified and as directed.
M&L for heavy duty Non skid tiles of size 300 X 300 X 10.8mm thick, or high dimension (except thickness) of any colour any design Durastone, weather proof impact ressistant, abrasion resistant exterior tiles, as in floors etc, set and jointed in neat cement slurry over and pointed in white or coloured cement to match, over and including 15mm thick screed bed in CM (1:4) complete all as specified and as directed.
M&L for rolled section as in main and cross beam, hip and jack rafter,purline where connected to common rafters and running rails and guides for sliding doors fixed witg angle cleats or other connecting plates of grade Fe-410 (grde E-165) complete all as specified and as directed.
S&F for Roof trusses (framed), trussed, purlins, and fastening and heavy brackets framing (beam, tee, angle, channel or flats section) including distance pieces, cleat etc conforming to Fe-410 (Gde-E250) quality - A complete all as specified and as directed.
M&L for mild steel plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment Fe-410-W (Gde-E-250) Quality 'A' complete all as specified and as directed.
Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required : hooks (stay), heavy, for large gates; hook and pintle hinges : large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate wahsers and similar small articles conforming to Fe-290 Gde-E-165
S&F for pre painted Galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering / cladding to wall fixed with self tapping screws complete all as specified and directed.
S&F for pre painted Galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering, ridge, eves gutters etc fixed with self tapping screws complete all as specified and directed.
M & L for preparing of new of previously untreated steel surface of any description, not otherwise described, over 10 cm width or girth applyig two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed.
S&F for aluminium wind tie of any size fixed with self tapping screws of size 50/75mm with integral EPDM washer in roof covering complete all as specified and as directed.
Supply & fixed to wall, laid in trenches, laid under floor, wall ceiling GI tubing medium grade ISI marked complete with all fittings, accessories all as directed of following sizes :
100mm dia
80mm dia
50mm dia
40mm dia
25mm dia
S&F gunmetal/brass gate valve, conforming to IS-778, ISI marked, with iron wheel head screwed at both ends for iron pipes or ferrule and fixing including necessary fittings like,flang, unions, check nuts, etc and any addition / alteration required for fixing, as fixed in repairs complete all as specified and as directed by the Engineer-in-charge of the following diameters:
50mm dia
40mm dia
25mm dia
Material,labour and laying of ductile iron pipe socket spigot centrifugally cast (spun) including suitable specials class A K-9, in any length, laid in trenches/floors or on supporting pillar of size 100 mm dia as per IS-8239/2000 and with inside cement mortar lining and out side with blue in colour complete all as specified and as directed. Note : cost includes suitable GI nuts and bolts
Supply and fix sluice valve, class PN-1.6 flanged and drilled at both ends confirming to IS:14846 with ISI mak, having stainless steel spindle and gun metal rings including wheel for operation all as specified including all joints with rubber gasket and jointing materials, bolts, nuts, washers etc with the following sizes complete all as specified and as directed. Note : cost includes suitable GI nuts and bolts
150 mm bore
100 mm bore
80 mm bore
Supply and fixing 150mm dia CI double out let air valve as per IS:14845 for fixing up in CI/DI water supply mains complete all as specified and as directed.Note : cost includes suitable GI nuts and bolts complete all as specified and directed.
Material and labour for construction of Brick Masonary valve chamber of size 1000x1000x1000mm (internal dimensions) with PCC 1:4:8 foundation 100mm thick, brick work using PCC block masonary 200 thick wall built in CM 1:6,PCC 1:3:6 coping 50mm thick, plastering 15mm thick in CM 1:6 to all internal wall including floor,and exeternal wall upto 150mm below ground level, including excavtion earth work in hard/dense soil, MS sheet cover 4mm thick with locking arrangement with ISA 50x50x6 mm frame embedded in PCC and painting to MS cover with two coats of synthetic enamel paint over one coat of red oxide primer etc complete all as specified and directed
Taking down the existing pipe GI pipe line upto 100mm at TRV area complete all as specified and as directed
M & L for cutting CI/DI/GI pipe of size upto 100mm and reducing to required length before laying as per site requirement all as specified and directed
Taking up old unserviceable water storage tank and S&F rotational moulded polyethylene water storage tank tripple layer, ISI marked, (Cylindrical vertical with closed top) with GI medium grade pipe for inlet, outlet, over flow, checknuts for inlet and outlet, hoisted and fixed in position including 25 mm PTMT Ball vlave all as specified of following sizes of.
1000 Ltr capacity
500 Ltr capacity
750 Ltr capacity
M&L for mild steel framed work such as gates, grills, gratings, etc., ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe-410 WGde E-250 complete and made out of suitable size MS angle iron/BMB/Flat iron, clamps, buts, bolt etc fixed by welding cutting is required as per Fe-410, including taking down of old wrought iron or mild steel structures of any size and one coat of red oxide with two coats synthetic enamell paint complete all as specified and as directed.
Supply and fixing brass/gun metal foot valve conforming to IS 4038, supplied and installed complete of size 100 mm dia complete all as specified and as directed.
Supply & fixing of Non Return valve with flanged and bypass arrangement and drilled ends, cast iron body confirming to relevant IS including jointing material such as stanless steel nut, bolts and washers, rubber/fiber gasket etc complete of size 100mm bore complete all as specified and as directed.
Supply and Laying in cable trenches, walls, structure LT UG cable XLPE insulated screened PVC sheated bedded galvanised strip armoured electric cable heavy duty 1100 volts fire retardant low smoke grade with standard aluminium conductor of size 3.5core x 50 sq.mm complete all as specified and directed.
Material and labour for Run lead joints (good quality) as per SSR Part-I suitable for 100mm bore complete all as specified and as directed.
Material and labour for rubber gasket (Tyton joints) for 100mm bore DI pipe complete all as specified and as directed.
Material and labour for Run lead joints (good quality) as per SSR Part-I suitable for 150mm bore complete all as specified and as directed.
Material and Labour for CI/DI fittings size upto 150mm bore such as, bends,tapers,tee,pieces(single and double branch) any type/angle/radius and straight connecting pieces but all ends flanged/spigot and socketed type upto 400mm dia bore complete including nuts,bolts and washers complete all as specified and as directed.
M & Labour for cutting the existing bitumen road at a width of 0.6 to 1 meter in width,1 to 1.3 meter in depth and after laying the water pipe the disturbed soil is should be return and refilling it and well ramming the surface and make the disturbed surface with 150mm thick PCC(1:2:4) type B1 mass concrete (using 20mm graded stone aggregate) complete all as specified and as directed
Taking up upto 100mm dia GI pipe from existing line and relaying the same at site as per requirement including changing of GI fittings such as tees,bends,socket,union,elbow,reducers,nipples etc complete as specified and as directed by Engr-In-Charge
M&L for Point wiring complete with 1.5 Sqmm (nominal area) single core, PVC insulated unsheathed, FRLS cable, 1100 volts grade, multistranded copper conductor (with colour coding of Red/Blue/Yellow for phase and Black for neutral), drawn through and including rigid non metallic PVC casing and capping of suitable size (not less than 25mm) and accessories fixed on walls/ceilings etc., including provision of PVC insulated 1.5 Sqmm FRLS cable with copper conductor green in colour for earth continuity and connected to common earth dolly and sunk in modular type pressed steel terminal boxes of suitable modules made out of 1.6mm thick MS sheet duly painted with two coats of anti-corrosive paint all over and modular cover plates with frames on top for suitable modules on top for housing switches, sockets etc., all as specified and as directed.
ONE LIGHT/FAN point controlled by one, one way 6 Amps switch.
TWO LIGHT/FAN point controlled by one, one way 6 Amps switch.
ONE 6A SOCKET OUTLET point controlled by one, one way 6 Amps switch on independent board.
ONE 6A SOCKET OUTLET point controlled by one, one way 6 Amps switch on same board with other switches.
M&L for Point wiring complete with 4 Sqmm (nominal area) single core, PVC insulated unsheathed, FRLS cable, 1100 volts grade, multistranded copper conductor (with colour coding of Red/Blue/Yellow for phase and Black for neutral), drawn through and including rigid non metallic PVC casing and capping of suitable size (not less than 25mm) and accessories fixed on walls/ceilings etc., including provision of PVC insulated 4 Sqmm FRLS cable with copper conductor green in colour for earth continuity and connected to common earth dolly and sunk in modular type pressed steel terminal boxes of suitable modules made out of 1.6mm thick MS sheet duly painted with two coats of anti-corrosive paint all over and modular cover plates with frames on top for suitable modules on top for housing switches, sockets etc., all as specified and as directed for ONE 16A SOCKET OUTLET point controlled by one, one way 16 Amps modular switch on independent board.
S&F modular switch, one way, one module, single pole, 6 Amps complete all as specified and as directed. Make : Roma(Anchor) / Legrand / Seimens / Havells
S&F modular switch, one way, one module, single pole, 16 Amps complete all as specified and as directed. Make : Roma(Anchor) / Legrand / Seimens / Havells
S&F modular socket outlet, multipurpose, 3 pin, 16 Amps, flush type controlled by one switch 230 volts AC circuit complete all as specified and as directed. Make : Roma(Anchor) / Legrand / Seimens / Havells
S&F modular socket outlet, multipurpose, 3 pin, 6 Amps, flush type controlled by one switch 230 volts AC circuit complete all as specified and as directed. Make : Roma(Anchor) / Legrand / Seimens / Havells
S&F AC starter switch of capacity 25 Amps working on 240 Volts, AC supply suitable for split type airconditioner complete all as specified and as directed. MAKE: CRAB TREE Cat part No. ACAO252504 or equivalent in ANCHOR/HAVELLS/L&T
S&F for ceiling rose, three terminal, 65x20mm size, PVC/Polycarbonate, insulated body, 6A, 240 volts complete all as specified and as directed.
Taking down ceiling fan of 1200mm sweep deposit to MES Store yard under AGE E/M Haddo and S&F new ceiling fan of 1200mm sweep, 220V, 50Hz AC supply, metallic body 5 star rated including providing of twin core copper wire 23/0.0076 from ceiling fan to ceiling rose complete all as specified and as directed. Make : CG (Model No : Glanna, ISI marked) or equivalent make of Havells/ Bajaj / Usha
S&F stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc. as reqd complete all as specified. Make:Roma (Anchor)/Legrand/Simens/Havells
S&F of LED tube light fittings with 20 watts (Warm White/ White Colour as per requirement of site complete) light source in integral module with polycarbonate / Acrylic diffuser more than 85% efficiency of light with LED lamp efficacy as 110 Lum/W THD < 15% with operating voltage range 150-300V, 50Hz with driver efficiency > 85%, surge voltage withstand 2.5KV, Power factor > 0.9, energy efficient fitting surface mounted including connecting up with two/three core cable complete all as specified and directed. Make : Luker/ Havells/ Philips/ Crompton Note : Quoted rate is inclusive of any other misc materials required for fixing new fittings.
S&F decorative ultra slim linear LED light fixture of 18 Watts capacity, recess mounted, 220 Volts, 50 Hz AC supply, extruded aluminium heat sink, environmental friendly energy efficient light fitting, surface mounted round in shape(Warm white/white colour as per requirement of site) complete all as specified and as directed. MAKE: Philips Cat Part No : Dura Slim or equivalent in CG/HAVELLS
S&F new GI brackets of GI pipe light grade of size 25mm dia including nuts, bolts and washers for building security light complete all as specified and directed.
S&F 25 watts LED building security light fittings IR 65 luminaire. Pressure die cast aluminium housing powder coated graphite grey and toughened glass of IP 65 including necessary fixing arrangements as per site requirements complete all as specified and directed. Make : C & S Model No. LTESSE25WLED/ Philips Model No. BRP020LEDHP/CW240V25/ CG Cat No - LSTS-25-CDL/ Havells/ Luker Cat Part No : LOHY210 WH
M&L for Sub main wiring complete with two runs (1P+1N) of 4.0 Sqmm single core, PVC insulated unsheathed, FRLS cable, 1100 volts grade, multistranded copper conductor (with colour coding of Red/Blue/Yellow for phase and Black for neutral) and one run of 4.0 Sqmm single core, PVC insulated unsheathed, FRLS cable, 1100 volts grade, multistranded copper conductor as earth wire green in colour including lugs, drawn through and including 32mm wide rigid non-metallic PVC casing and capping and its accessories (OR) 25mm dia PVC conduit and conduit accessories fixed on surface of wall/ceiling/roof/ floor complete all as specified and as directed. NOTE: Two runs of 4.0 Sqm copper conductor, One run of 4.0 Sqmm copper conductor as earth wire and one run of PVC casing and capping / PVC conduit shall be measured as one unit length.
S&F MCCB DB sheet steel enclosure, VTPN, 4-way, double door, 415 Volts with 200 Amps rated bus bar, IP-43 protection suitable for incoming MCCB 160/200 Amps and outgoing MCB TP/SP, enclosed in standard steel sheet flush mounting type, factory fabricated complete all as specified and as directed. MAKE: L&T/ LEGRAND/ SIEMENS/ INDO ASIAN/ HAVELLS
S&F MCCB, 4 pole, 160 Amps, 25KA rupturing capacity, 415 Volts with thermal and magnetic release complete all as specified and as directed. Make : Havells/ L&T/ Indo Asian/ Legrand
S&F MCB, SP, "C" series, 240 volts, 6-32 Amps, 10 KA rupturing capacity complete all as specified and as directed. Make : Havells/L&T/Indo Asian/Legrand/Schneider
M&L for earthing complete with GI earth plate electrode of size 600mmx600mmx6.15mm thick buried directly in ground (earth pit not less than 2.25m deep below the normal ground level) with top edge of the earth plate not less than 1.5m below normal ground level connected to 4mm dia GI earth wire as earth lead connected by means of bolts, nuts, washers and check nuts made out of galvanised iron or steel all as shown on electrical plate No. 3 of SSR Part-I connected to common earth dolly including testing on completion complete all as specified and directed. NOTES: (1) The unit rate shall also include for earth work in any type of soil, PCC (1:3:6) type C1 chamber, pre-cast RCC (1:2:4) type B-1 using 20mm graded stone aggregate cover 50mm thick reinforced with TMT bars 8mm dia @ 100mm c/c both ways, funnel with watering pipe 20mm dia medium grade, GI protection pipe light grade 40mm dia and wire mesh complete in addition to item No. 1(a) to (e) of preamble (notes) under sub-heading earthing, specified on Sl. Page Nos. 422 & 423 of SSR Part-II. (2) Earthing lead and GI protection pipe beyond 7.5m will be measured and paid separately.
M&L for LT XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) with aluminium conductor, 1100 volts grade, cross sectional area 4 core, 16 Sqmm laid in trenches/floors/ducts or fixed on poles/walls with suitable clamps/saddles or drawn through pipes etc., including connecting up with suitable size of lugs, glands and jointing material and including taking down old u/s cable complete all as specified and as directed. Note: (i) Necessary test results like continuity test, megger tests shall be submitted to Engg-in-Charge before the cable is laid. (ii)Excavation earth work will be measured and paid separately
M&L for HDPE DWC (Double wall corrugated) pipe of size 40mm (Outer diameter) x 32mm (Inner diameter) along with connected accessories like couplers, bends, end caps etc., laid in trenches/floors/ducts or fixed on poles/walls for as in protection of LT/ HT cable complete all as specified and as directed. Make : REX POLYEXTRUSION LTD/ Tirupati plastomatics Pvt Ltd
RAJESH ENTERPRISE
V D JADEJA
Govinda Swamy Construction
Bismi Builders & Enterprises
M/s K Moorthi
SKV Engineering
CHANDER SEKER ENTERPRISE
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .