PROVN OF CHAIN LINK FENCING TO BIFURCATE DOMESTIC AREA AND TECH AREA AT NEW LOCATION OF AF STN SONEGAON

Amount

Excavation in post holes (or similar holes) each not exceeding 0.5 cum and getting out, removing soil to a distance not exceeding 50 m and making good surface in soft/loose soil complete all as specified and directed.

Excavation in trenches, not exceeding 1.5 m wide and not exceeding 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. not exceeding 10 sqm on plan and not exceeding 1.5 m in depth and getting out soft soil complete all as specified and directed.

S&F mild steel works as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc. flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting welding and similar work conforming to Fe-290 Gde E-165 etc complete all as specified and directed.

M & L for cement concrete type C-2, 1:3:6 (using 40mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed.

M&L for Moorum/red bajri filling in floors or pavings, laid in layers not exceeding 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed.

Removing excavated soils exceeding 1.5km but not exceeding. 5.0 km and depositing where directed at a level not exceeding1.5 m above the starting point complete all as specified and directed.

Fixing only chain link fencing including line wires of any dia, any mesh size and type to any types of starndards, rails, straining bolts etc including provision of binding wire complete all as specified & directed. Notes : Chain link fencing, nut bolts,shall be measured separtely under supply only rate

Supply only MS Galvanised chain link fencing any size or type approved mesh size etc complete all as specified and directed.

Supply only mild steel screw bolts 5 to 10 mm dia (machine made) with hezagonal or square at one end and screwed the other ends and fitted with washers and one hezagonal or squre nut exceeding 5 cm but not exceeding 10 cm long complete all as specified and directed.

Supply only 12mm dia mild steel round bars confirming to Fe-290(grade E-165) in required length for chain link fencing complete all as specified and directed.

M&L for preparation of new steel and iron surfaces of any description, not exceeding 10 cm in width or girth , not otherwise described and painting with two coats of synthetic enamel paint over a coat of red oxide zinc primer complete all as specified and directed.

M&L for preparation of new steel and iron surfaces of any description, over 10 cm in width or girth , not otherwise described and painting with two coats of synthetic enamel paint over a coat of red oxide zinc primer complete all as specified and directed.

S&F Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as complete all as specified and directed.

M & L for brickwork with fly ash bricks, straight or curved on plan exceeding 6m mean radius built in CM (1:4) complete all as specified and directed.

M&L for 10mm thick rendering CM 1:4 on fair faces of brick work finished even and smooth without using extra cement all as specified and directed.

M&L for 15mm thick rendering CM 1:6 on other then fair faces of brick work finished even and smooth without using extra cement all as specified and directed.

M&L for preparation new plastered surfaces of walls and applying two coats of cement base paint complete all as specified and directed.

M&L for PCC (1:2:4) type B-1, using 20mm crushed stone agregate as in coping benching etc complete all as specified and directed.

M&L mild steel framed work of ornamental and intricate design such as in door and gates, framed & hung as gate, including pintel hinges, stops, hand made sliding bolts etc with end of bars shoulded and rivetted or forged into spikes, framed gaured bar, complete all as specified and directed.

M&L for 100 mm dia high density polythene pipes (HDPE) of pressure rating 6 Kgf/Cm sq laid in or inserted in brick wall for weep holes complete all as specified and directed.

M/s S. S. MUNDE

M/s M.G. Hargunani

M/s Shrangi Rishi Construction