Renovation of existing classrooms and headmaster room for MPPS Rajeev Nagar

Amount

PART-A CIVIL WORKS

Disposal of moorum/building rubbish/ malba/ similar unserviceable, dismantled or waste material by mechanical transport including loading, transporting, unloading to approved municipal dumping ground for lead upto 10 km for all lifts, complete as per directions of Engineer-in-charge.

Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge.All kinds of soil

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil.

Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides,ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m :All kinds of soil, Pipes, cables etc, not exceeding 80 mm dia.

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.

Extra for every additional lift of 1.5 m or part thereof in excavation / banking excavated or stacked materials All kinds of soil

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size).

Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth.

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size).

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size).

Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors,Sumps/water tank cover slabs, roofs, landings, balconies and access platform

Centering and shuttering including strutting, propping etc. and removal of form for Edges of slabs and breaks in floors and walls Under 20 cm wide

Brick work with common burnt clay modular bricks of class designation 7.5 in walls of water tank,sump, foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand)

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 5.0 in superstructure above plinth level up to floor V level. Cement mortar 1:4 (1 cement :4 coarse sand)

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners Second class sal wood

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :

Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. Complete 100 mm

Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily.Glazed Vitrified tiles Matt/Antiskid finish of size,Size of Tile 600 x 600 mm.

Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.

Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.

Providing 12mm thick cement plaster 1:3 (1 cement: 3 fine sand) finished with a floating coat of neat cement including providing and mixing water proofing material in cement mortar, rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge..

Providing neat cement punning of required thickness over cement plaster to brick masonry walls of the sump including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.

Providing and applying two or more coats of synthetic enamel painting along with a base coat of of approved brand and manufacture to give an even shade on new work of wood or steel est complete.

Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete

Providing and applying two or or more coats of wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour.

Finishing walls with Acrylic Smooth exterior paint of required shade : Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface

Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls with necessary scaffolding etc complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge. With cement mortar 1:4 (1 cement : 4 fine sand)

Providing & fixing White vitreous china water closet squatting pan (Indian type) along with “S” or “P” trap including dismantling of old WC seat and “S” or “P” trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material i/c malba, all complete as per the direction of Engineer-in charge. Long pattern W.C Pan of size 580x440 mm

Dismantling W.C. Pan/urinal/washbasin of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-in- Charge.

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. Nominal concrete (i/c equivalent design mix)

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In cement mortar

Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead as directed by Engineer-in-charge: Of area 3 sq. metres and below

Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead as directed by Engineer-in-charge: Of area beyond 3 sq. metres

Dismantling existing Vitrified / Ceramic tile work in floors/roofs/skirtings/wall dadoings laid in cement mortar of any proportion and of any thickness including stacking material within 50 metres lead.

Providing and laying 60mm thick factory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved s;ze, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge.

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : One urinal basin with 5 litre white P.V.C. automatic flushing cistern

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors :100 mm inlet and 75 mm outlet Hubless centrifugally cast (spun) iron epoxy coated inside & outside as per IS:15905

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 20 mm nominal outer dia Pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 25 mm nominal outer dia Pipes

Providing and fixing circular high density polyethylene water storage loft tank with cover, conforming to ISI : 12701, colour of opaque white or as approved by Engineer in-charge. The rate includes making necessary holes for inlet, outlet & over flow pipes. The base support and other fittings & fixtures for tank are deemed to be included in the quoted rate

Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 :15 mm nominal bore

Providing and fixing PTMT stop cock of approved quality and colour.15 mm nominal bore, 86 mm long, weighing not less than 88 gms

Providing and fixing PTMT extension nipple for water tank pipe, fittings of approved quality and colour.15 mm nominal bore, weighing not less than 32 gms

Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design: 100x100 mm size P type; With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design. With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 4.0 mm thickness (weight not less than 10 kg/ sqm)

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately)30 mm thick

Providing and fixing factory made single extruded WPC (wood polymer composite) solid door/window/Ceosetory windows & other Frames/Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. (M.S hold fast/lugs or SS dash fasteners shall be paid for separately). Frame size 45 x 70 mm

Providing Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete at all levels. Thermo-Mechanically Treated bars of grade Fe-500D or more ( Basic price of Reinforcement Steel is Rs 65.00 per Kg)

Structural steel work riveted, bolted or welded in built up sections, trusses and frame work, including cutting, hoisting, fixing in position with necessary wooden/steel scaffolding including providing applying two or more coats of synthetic enamel painting over a coat of approved steel primer all complete.(Note: The Basic rate of Structural Steel is considered as Rs 70.00 Per Kgs)

Suppying and fabricating top cover for water tanks, sumps etc with MS sheets, structural steel plates, angles,rods etc with a provision of locking arrangement including providing and applying two or more coats of syn thetic necessary primer and painting works.

Providing and fixing 35 mm thick flush doors conforming IS: 2202 (part-1) core of solid wood, construction with frame of pine wood with density of 700 kg/m3 with 5 ply construction with 1mm HPL sheet (laminate) on both sides and laminate pre pressed from factory, conforming to IS 2046 with BWP grade adhesive treatment with phenol formaldehyde resin as per IS 848 norms ensures superior quality and performance of the doors with uniform thickness without any undulations, wraping or bending, emission free as per E1 standard and eco-friendly fixed to the door frames with 4 Nos.of 125mm long SS hinges etc., complete. (Note: The shutters shall be provided with vision pannel as per drawing. In case of double leaved shutters rebating shall be made without any extra cost)

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For fixed portion Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron)

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For fixed portion Powder coated aluminium (minimum thickness of powder coating 50 micron)

Providing and fixing approved quality and make S.S. mosquito mesh of 304 grade in aluminium doors, windows, ventilators etc.with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and as per the directions of Engineer-in-charge .

Providing and fixing Aluminium Sliding window concealed lock for shutters, Star / DEN or approved equivalent make by making necessary cutting / recessing etc., complete

Providing and fixing 75mm PVC SWR grade pipes and specials of make FINOLEX, SUPREME, PRINCE for waste and vent pipes etc complete including necessary accessories, bends. Tees, adhesives, clamps etc as per manufacturers specification.

Providing and fixing 110mm PVC SWR grade pipes and specials of make FINOLEX, SUPREME, PRINCE for waste and vent pipes etc complete including necessary accessories, bends. Tees, adhesives, clamps etc as per manufacturers specification.

PART-B DIGGING OF BOREWELL

Prospecting of water table in the ground by Hydrologist/water diviner for drilling borewells to give maximum yield. Contractor shall identify 2 points and suggest 1 point which for maximum water yield.

Drilling of borewell of 165mm (6 1/2") dia. In any kind of soil/rock to any depth as required or as specified including alignment, transportation, welding of casing pipe joints and labour charges and drilling from 0 to 250 feet depth etc.,

Drilling of borewell of 165mm (6 1/2") dia. In any kind of soil/rock to any depth as required or as specified including alignment, transportation, welding of casing pipe joints and labour charges and drilling from 251 to 350 feet depth etc.,

Drilling of borewell of 165mm (6 1/2") dia. In any kind of soil/rock to any depth as required or as specified including alignment, transportation, welding of casing pipe joints and labour charges and drilling from 351 to 450 feet depth etc.,

Drilling of borewell of 165mm (6 1/2") dia. In any kind of soil/rock to any depth as required or as specified including alignment, transportation, welding of casing pipe joints and labour charges and drilling from 451 to 550 feet depth etc.,

Drilling of borewell of 165mm (6 1/2") dia. In any kind of soil/rock to any depth as required or as specified including alignment, transportation, welding of casing pipe joints and labour charges and drilling from 551 to 650 feet depth etc.,

Drilling of borewell of 165mm (6 1/2") dia. In any kind of soil/rock to any depth as required or as specified including alignment, transportation, welding of casing pipe joints and labour charges and drilling from 651 to 750 feet depth etc.,

Drilling of borewell of 165mm (6 1/2") dia. In any kind of soil/rock to any depth as required or as specified including alignment, transportation, welding of casing pipe joints and labour charges and drilling from 751 to 850 feet depth etc.,

Drilling of borewell of 165mm (6 1/2") dia. In any kind of soil/rock to any depth as required or as specified including alignment, transportation, welding of casing pipe joints and labour charges and drilling from 851 to 950 feet depth etc.,

Providing and fixing of 175mm outer diameter M.S ERW casing pipe suitable for 6 1/2" dia borewell and a minimum thickness of 3mm, including welding of joints & Collers inserting the pipe into borewell all as specified or as required.

Providing and fixing PVC casing of 250mm dia pipe of 4kg/sq. cm class at ground level to prevent earth erosion all as required.

Supplying and fixing of MS Cap suitable for Casing pipe 175mm Dia.

PART-C FURNITURE WORKS

Supplying of Student desk made out MS tubular frame with 50mmx25mmx16guage CRCA pipe for verticals and Horizontals of writing desk and vertical for seating as indicated in the drawing. The frame shall be fabricated with 25mmx25mmx16guage for horizontal and tie members and Back Rest of the table. Necessary stiffener shall be provided at all junctions of the vertical and horizontal of the frame, and shall be thoroughly welded. The entire frame work shall be black powder coated and the frame shall be provided with leg. The top of the desk shall be 19mm tk. Block board BWP grade of approved ISI make with top side postform laminate of 0.6mm tk. of approved ISI make, shade and design on top surface only. The bottom surface shall be post laminated 0.5mm tk. for moisture protection. Two lengthier edges shall be postformed and two exposed sides with teakwood beading of minimum 4mm tk. with melamine polish.The top of the Seat shall be 25mm tk. Block board BWP grade of approved ISI make with top side postform laminate of 0.6mm tk. of approved ISI make, shade and design on top surface only. The bottom surface shall be post laminated 0.5mm tk. for moisture protection. Two lengthier edges shall be postformed and two exposed sides with teakwood beading of minimum 4mm tk. with melamine polish.The intermediate shelf including vertical front and back rest of the table shall be provided with 12mm tk. Plywood of approved ISI make with one side postform laminate 0.6mm tk. and other side 0.5mm tk. laminate for moisture protection and durability. Two lengthier edges postformed and other two exposed edges with teak wood beading 4mm tk. with melamine polish.The intermediate shelf supporting CRCA tube 25mmx25mm should have radius bend towards student sitting position, not to have injury to their knee as a matter of safety standard of fabrication of School furniture.The dimension of the table shall be as per drawing and rate quoted shall include all stiffener and additional tie members which are not seen in the drawing and as per instructions are engineer incharge.

Supplying and fixing Tables of size 1200 mm Length x 600mm Width x750mm Height for Teachers.The top,leg and sides of the table shall be made out of approved quality and shade pre-laminated MDF boards provided with 0.7 mm thick, Post formed lamination on top & 0.5 mm thick balancing lamination at the bottom.Table Top shall be with 25 mm thick MDF board both side post forming on length side and shall be provided with 0.7mm thick pre-lamination on either side.All exposed edges shall be provided with 2mm thick PVC edge banding of approved quality and make.(Shades:Beech /Teak / Oak / Grey)

Supplying and fixing Table Medium of size 1350 mm (L) x 750 mm (B) x 750 mm (H).The Table Medium shall be made out of high quality material for durability and quality. The table top shall be of 25mm thick, MDF board provided with 0.7 mm thick, Post formed lamination on top & 0.5 mm thick balancing lamination at the bottom, with two sides post formed edges and the other two sides edge banded with 2mm thick, matching colour PVC edge-band. The table legs are made out of 25mm thick, MDF Board with both sides 0.7 mm decorative laminate and 2mm thick, edge banding. Panel legs are to be provided with nylon rectangular shoes. Modesty panel made up of 18 mm thick MDF Board, with both side 0.7 thick decorative laminations. All the exposed edges are PVC edge-banded for moisture and durability. High quality hardware to be used. The Table Medium should have one (1) 3 drawer mobile unit size 450 mm (Width) 450 mm (Depth) x 600 mm (height-combined) on the right side.

Supplying medium back chairs of standard make. Seat bottom ( W=480mm and H=480mm ) shall be made out of 12mm thick BWR Plywood of approved make, hot pressed with moulded polyurethane foam of 50mm min thickness ,having a density of 45 to 50 kg/cum minimum, fabric of approved make with necessary staples etc Seat back should be made of 12mm thick ply of BWR grade hot pressed with moulded PU foam of 50mm minimum thickness having a density of min 35-40kg/cum,with fabric of approved made with ABS back cover with minimum 1.5mm thick. The plywood shall be provided with necessary fasteners to fix the connecting arm size 500 mm ht and 450 mm width.Connecting arm to be provided between seat back and shall be made out of bright flat of 75mm width and 8mm thick covered with flexible cover made out of good quality plastic.The sychromechanism shall be with one locking position made out of 3mm MS sheet with necessary fasteners and swing arrangement locking and lifting lever to adjust the height and providing MS arms to fix with handle made out of MS flat 8mm thick on both sides with necessary fasteners.Arm rest shall be of polyurethane as per manufacturer’s specifications, shape and size.All metal components are to be powder coated with 50 microns minimum thickness.Gas lift Shall be of class 4 category of MS powder coated with PVC adjustable cover .Wheel base shall be made out of 2mm thick sheet powder coated and bent to shape and making provision for fixing 5 numbers of ABS castors as per manufacturers specifications.Total height of the chair shall be 960mm.

Supplying and fixing sliding door units of size 570 mm wide and 1200 mm height having two horizontal shelves & of varying length as required & made out of 18 mm thick MDF board for all exterior & interior, horizontal/vertical panels. The exposed surfaces shall be provided with 0.55 mm (min) thick post lamination & internal surfaces with 0.5 mm thick balancing lamination. Each sliding door unit shall be of 900 mm width (appx.) having two sliding shutters of width 450 mm each (appx.) & shutters shall be made out of 18 mm thick laminated MDF board having approved make sliding arrangement of Ebco/Hetich. The structure of the sliding door unit shall be assembled using Mini fix fastners (Male screws with lock) arrangement and Ebco/Hetich make handles and locking facilities. The front side top panel of sliding door unit shall have post formed edges and other three sides shall have PVC lipping as required. (Note: Rate to be quoted shall be for the complete finished work including all materials & labour. Area of sliding door unit as seen in elevation shall be measured for payment). (Conventional fixing arrangement shall not be used and only standard fasteners of Mini fix of make Ebco /Hettich shall be used).

BEREIAN COMMUNICATIONS AND COMPONENTS

V VENKATESH

KASHISH CONSTRUCTIONS