SPECIAL REPAIR TO BLDG No. T-4/1 4/2 4/3 4/4 4/5 4/6 and 4/7 AT RMS CHAIL UNDER GE JUTOGH

Amount

Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified.

Dismantling timber scantlings 40 sq. cm and over in section, in any position (Unframed work) complete all as specified.

Dismantling timber scantlings in any position in fillets, rails, posts, rafters , purlins, etc. under 40 sq. cm in section (Unframed work) complete all as specified.

Second class hard-wood, timber fixed and clean sawn, in scantlings complete all as specified.

Preparing surfaces of wood and wood based materials, new or old of any description and girth, not otherwise described and treated with creosote complete all as specified.

Plain fillets, square, rectangular or triangular in section, and secured with nails or brads, using second class hard-wood clean sawn in sectional area exc 13 sq.cm and not exc 25 sq.cm complete all as specified.

Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified

Pre- painted galvatume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified.

False ceiling grid made of anodised aluminium snap grid frame work size of grid 605 X 605 mm & hangers 6 mm dia. G.I. (upto 1200 mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60 mm long and expansion hold fasteners 12.5 mm dia. 40 mm long including non asbestos fibre cement building boards self designed 4 mm thick suitably placed and dismantling old ceiling complete all as specified.

Taking down chowkats or frames without taking off shutters from the frame not exc. 1.5 sq. each complete all as specified.

Taking down chowkats or frames without taking off shutters from the frame exc. 1.5 sq. m but n.exc.4 sqm each complete all as specified.

Taking down shutters of any description n exc 1 sq. m each complete all as specified.

Taking down shutters of any description exc 1 sq. m and not exc 2 sq. m each complete all as specified.

Second class hard wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified

35mm thick second class hard wood plain framed, panelled shutter (two panel) with lock rail and panel of 9mm B.W.P. commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS:1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified.

35 mm thick second class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in MES Schedule Part I, Section 8, clause 8.20 (a) supplied and fitted to chowkats complete all as specified.

35mm thick second class hardwood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, for securing glass, etc.; sizes of members of shutters as specified in MES Schedule Part I, Section 8, clause 8.20 (a); fitted to chowkats , windows, ventilators etc. are provided with stiles and rails as specified in MES Schedule Part I, Section 8 clause 8.20 (b) complete all as specified.

Galvanized mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanized wire staples complete all as specified.

Sheet glass 3.0 mm thick, ordinary quality and glazing with oil putty in square exc 0.5 sq m in each pane complete all as specified.

Cold rolled mild steel medium weight butt hinge 75 mm size complete all as specified.

Cold rolled mild steel medium weight butt hinge 100 mm size complete all as specified.

200 mm long mild steel barrel tower bolts, stove enamelled black, with bright bolt and fixed complete all as specified.

150 mm long mild steel barrel tower bolts, stove enamelled black, with bright bolt and fixed complete all as specified.

300 mm long mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified.

150 mm mild steel pressed handles, oval type, stove enamelled black complete all as specified.

125 mm mild steel pressed handles, oval type, stove enamelled black complete all as specified.

300 mm brass ordinary rat tail rod pattern springs including roller and roller plate complete all as specified.

Demolition of cement concrete (Unreinforced) of any description in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified.

75mm thick cement concrete 1:4:8 type D-2 (using 40mm graded stone aggregate) as in sub base of floor complete all as specified.

Taking down cement or cement lime plaster of any description on brick or stone walls etc including raking out joints hacking for key scrubbing down with water etc complete all as specified.

Rendering 15 mm thick in cement plaster 1:6 on fair faces of brick work or concrete/stone surface, surface finished even and smooth without using extra cement complete all as specified.

Rendering 15 mm thick in cement plaster 1:4 on rough faces of brick work or concrete surfaces/stone work, surface finished even and smooth without using extra cement complete all as specified.

Cement concrete 1:3:6 type C1 (using 20mm graded stone aggregate) as in, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified.

Demolition of brick masonry /stone masonry built in cement mortar including all quious, pillars arches etc complete all as specified.

Brick work, with sub class 'B' bricks straight or curvedd on plan exc 6 m means radius built in cement mortor (1: 6) complete all as specified.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified.

Glazed ceremic coloured tiles of size 300 mm x 450 mm x 7 mm thick as in dados, skirting, etc set jointed in neat cement slurry @ 3 Kg/Sqm and pointed in coloured cement to match the tiles over and including 15 mm thick rendering in CM 1 : 4 complete all as specified.

Non-Skid coloured ceramic tiles/Matt finish 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer in CM 1:6 complete all as specified.

Vitreous china wash basin, white, flat back, size 550 x 400 mm including cutting for and pinning in ends of brackets or erecting stand including brass chromium plated pillar tap 15 mm bore complete all as specified.

Dismantling 100 mm cast iron or reinforced concrete drain pipe, jointed in cement mortar and taking out of trenches / floor / wall complete all as specified.

Dismantling 75 mm cast iron or reinforced concrete drain pipes, jointed in cement mortar and taking out of trenches / floor / wall complete all as specified.

100 mm bore cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, fixed to wall complete all as specified.

75 mm bore cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, fixed to wall complete all as specified.

75 mm bore dia cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete 1:2:4 type B1 complete all as specified.

Bib taps fancy type cast copper alloy chromium plated screwed down screwed for iron pipe, 15 mm bore, fixed in repairs complete all as specified.

15mm bore stop valves cast copper alloy, chromium plated, screwed down high pre-ssure with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed in repairs complete all as specified.

15 mm size PVC connections 450 mm long with PTMT nuts complete all as specified.

Brass chromium plated tubular towel rail, 20 mm dia, D type, 60 cm long between flanges complete all as specified.

15mm bore `Medium grade` GI tubing with all fittings and fixed complete to walls and ceilings or laid in floors including taking up or down old tubes complete all as specified.

600mmX450 mm bevelled edge mirror of selcted quality glass, with edge designed mounted and fixed with PVC plugs and chromium plated brass Studs, fixed in repairs complete all as specified.

Preparation of new wall surfaces and applying two coats of distemper oil emulsion over and including 3 mm thick white cement based wall care putty complete all as specified.

Preparation of new wooden surfaces of any description not otherwise described over 10 Cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified.

Preparation of old painted wooden surface of any description, not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified.

Preparation of plastered or unplastered surfaces of walls and applying two coats of cement base paint of approved tint complete all as specified.

RCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified.

Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified.

Use and waste of formwork to soffits of susspended slabs such as roof slabs,kikchen slabs ,landings & similar work not exc 200 mm thick for fair finishes surface complete all as specified.

Brickwork with sub- class ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in cm 1:4 complete all as specified.

Coloured chequred cement concrete tiles (30 cm x 30 cm x 25 mm thick) in grey cement and with pigment in floors etc , set and jointed in neat cement slurry, over and including 20mm thick screed bed in cement mortar 1:4 complete all as specified.

Taking down carefully aluminium point wiring (light, socket or power) complete including fittings and fixtures such as switches, ceiling roses pendents, regulators, sockets etc for re use to be measured separetly including making good the disturbed portion/surface complete all as specified.

Point wiring with multistranded copper conductor cable, PVC insulated and unsheathed (FRLS) size 1.5 sqmm drawn in and including PVC casing and caping with fixing accessories with pressed steel concealed terminal boxes covered with 3 mm thick laminated sheet including continous earth wire of PVC insulated unsheathed multi stranded copper conductor cable size 1.5 Sqmm (FRLS) for earth wire connected to common earth dolly for the following complete all as specified:-

One light point controlled by one switch

One bell point controlled by one switch

All as per item No 61 above but for one 3/5 pin socket 5 Amp on same board.

All as per item No 61 above but for one 3/5 pin socket 5 Amp on independent board.

All as per item No 61 above but for 3 pin socket outlet 15 Amps independent with 4 sq mm including continuous earthing with multistandred copper conductor PVC insulated unsheathed size 4 Sq mm cable (FRLS) complete all as specified.

Switch piano flush type, 5 Amps, 230 Volt ,AC single pole one way complete all as specified.

Socket 3/ 5 pins, 6 Amp, 230 Volt ,AC single pole one way complete all as specified..

Socket 15 Amps flush type,3/ 5 Pin, 230 Volts , AC complete all as specified..

Switch 15 Amps flush type 230 Volts , AC complete all as specified.

Ding Dong electric door bell complete all as specified.

Bell push, 5 Amps, single pole one way complete all as specified..

Ceiling rose, surface backlite, 65 x 50mm, three terminals complete all as specified.

Batten holder PVC / Polycarbonate base / back suitable for LED lamp complete all as specified.

LED Bulbs 9 /10W B-22 Pin type complete all as specified.

LED tube light along with fixture, 20W(4 feet) wall mounted LED batten, extruded PVC, heat sink provided for efficient heat dissipation & integrated electronic driver, optics diffused, fixed in repair complete all as specified. Make : BAJAJ cat No:BCLSB 20 WH or its equivalent in jthe makes mentioned in Appendix 'B'.

LED building secuity light 25 watt made up of pressure die cast aluminium housing with mid power LED as lightining source and PC cover having top opening seperate driver compartment with IP 66 protection and impact resistance of IK07 including taking down existing fitting complete all as specified. Make : Bajaj cat No BCLST 25W LED I V2 or its equivalent in jthe makes mentioned in Appendix 'B'.

Submain wiring with two runs of 6 sq mm and one run of 4 sq mm earth Wire single core PVC insulated FRLS sheathed copper cable connecting to common earth dolly in and including heavy duty PVC casing caping and dismantling and taking down existing unserviceable wiring, all accessories complete all as specified. Note : Two runs of 6 sq mm cable and one run of 4 sq mm cable and one run of PVC casing and capping shall be measured as one unit.

VTPN 4 way double door prewired distribution board TPN-DPX including one No MCCB 125 Amps, 25 kA, 4 pole as incomer and 07 Nos MCB SP 40 Amp as outgoing double door type sheet metal enclosure 415V with 200 Amps rated standard copper busbar of suitable size plate and common neutral link appropriate Nos with blanking plate complete and including taking down existing VTPN DB's complete all as specified. Note : Unit rate quoted shall include the cost of MCCB and MCBs.

SPN sheet metal enclosure for distribution board (DB's) suitable for MCBs fitted with bus bar , neutral link ,earth bar and din rail 240 V, 50 Hz supply double door 12 way fixed in repair complete all as specified.

RCCBs for earth leakage protection 2 pole ,40 Amp rating, 30 mA capacity suitable for 240 Volts including taking down existing MCB/ RCCB complete all as specified.

MCB SPN 06 to 40 Amps 240V including all termnials, fitting etc.fixed in repair complete all as specified.

MCB SP 06 to 40 Amps 240V including all termnials, fitting etc fixed in repair complete all as specified.

Earthing complete with galvanised steel earth plate electrode 600 x 600 x 6.3 mm thick burried directly in gorund (earth pit not less than 2.25 Mtr below normal ground level),and top edge of earth plate not less than 1.5 mtr below normal ground level, connected to galvanised earth wire 4 mm dia with bolts, nuts & check nuts, and washers and galvanised iron protection pipe light grade of 15 mm dia and watering pipe medium grade of 20 mm dia and filled with alternate layers of charcoal and common salt, watering funnel with wire mesh, earth pit chamber and cover, CI frame, earth pit made of PCC 1:3:6 type C-2 complete all as shown in electrical plate No-3 of MES Schedule Part-I of 2009 connected to earthing test point all as specified and indicated including earth work excavation in any type of soil and testing on completion complete all as specified.

R. P. Suppliers and Construction Co.

Ajinkya Constructions

NIRMAL SINGH BHOGAL AND SON

Dharm Singh Contractor

A P ENTERPRISES

GULATI BUILDERS