Construction of Compound wall and other additional renovation works for the PWD Division Office in Karwar Taluka Uttara Kannada District

Construction of Compound wall and other additional renovation works for the PWD Division Office in Karwar Taluka Uttara Kannada District (Sub Estimate-I, Compound Wall)

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates ...

Providing Coursed rubble masonry (first sort) with hard stone in foundation

and plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) ---- DTS

Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting Each deposited layer by ramming after watering with a lea...

Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffoldin...

Granular Sub-Base - By Mix in Place Method - Construction of Granular Sub-Base of required grading as per design spreading in uniform layers with motor grader on prepared sur...

Providing and laying 60mm thick factory made cement concrete paver block of approved shape and colour of M -30 grade made of C&D waste by block making machine with vibratory compaction laid in...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite...

Mechanical Means -

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, stru...

Providing and constructing load bearing wall with Solid Concrete blocks of size 400x150x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 con...

Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural ...

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate sections and other sections of ...

Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doo...

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawing...

Providing and fixing carbon steel galvanised ( minimum coating 5 micron) dash fastener of 10 mm dia double threaded 6.8 grade (yield strength 480 N/mm2), counter sunk head, comprising ...

Finishing walls with water proofing cement paint of required shade :New work (Two coats applied @ 4.84 kg/10 m²) to give an even shade after thoroughly brooming the surface to remove all dirt, dus...

Precast Compound wall: Providing and fixing factory made M20 Grade Cement Precast Boundary Compound wall of size 2100mm (L) x 300 mm (B) x 50mm (D) with Panel Weight approximately 77kg and panels rein...

Providing and fixing storage unit of 0.75m width made out of 19mm thick commercial ply vertical support finished in approved 1.5mm laminate with 12mm thick ply packing internally finished with enamel ...

Construction of Compound wall and other additional renovation works for the PWD Division Office in Karwar Taluka Uttara Kannada District

Providing and fixing Single seater Recliner with cushion of size 3(L)x2.5(W)X2.75(H) ft made of Polyurethane or High performance upholstery fabric with seats fitted ...

Teak Wood Horse Shoe Table : Of size overall Length 20'. L-16' x Width 2' or 2.5'x Height 2.5' =2 Nos. & 4' one "U" shape Table, such that when three table joined together and make one Horse shoe tabl...

Teak Wood Table : Of size 5'x3'. Leg size 2.5"x2.5". Table frame to be 4"x1.25" thick pattis. Foot rest to be provided with 2"x1.5"=2 Nos. Table top to be laminated with 1mm

thick laminate with teak e...

Teak Wood Revolving Chair : Chair upper construction seasoned teak wood with melomon polish, Stain less steel 5 caster wheel legs, Hydraulic height adjustment. The Chair shall be neatly finished and p...

Teak Wood Raton Bottom Chair : (Seat with cushion & back with teakwood Patti) leg size 2"x1.5" with front and back legs of size 37"x2"x1.5".Handle of size 2"x1.5". Chair side bars 3"x1.1/4" pattis. Se...

Computer Chair : Stainless steel base ABS seat and back cushion with arm Hydraulic Height adjustment. ---- DTS

Peacock Chair : (Standard company) Seat, and Back half cushion with Cloth or Rexin. ---- DTS

Teak Wood Nagin Teapoy : Of size 3'x2'. Made out of Teak Wood leg size 3"x3" with carving. Top glass frame of size 3"x1.1/4" & 2"x 1.5" with 8mm tinted glass. Bottom magzine shelf required with 1.5'x3...

Teak Wood Typist & Computer Table (Size 4'X2') : Size: 121.92 L x 60.9cm B x 76.2cm H, Legs 4.44cm x 4.44 cm 6 nos. Side cross bars 10.16 x 2.54 cm Bottom portion 5.08 x 2.54 cm with 3 drawers or one ...

Supplying .TR split Air conditioners suitable for operation on A/C supply single phase 50 Hz 230 V with hermetically sealed compressor with air cooled condenser, motor capacitor and start run capacito...

Supplying,installing,testingandcommissioningofDieselGeneratorsetwithfollowingspecifications.Powerratingasperstandardreferenceconditionasper-BS5514/ISO3046/ ISO8528&IS1002/ISO 3046 Generator set specif...

Supplying,erecting,testing&commissioningofOFF-LINEUPS system suitableforoperationon230V,50Hz,A/Csupply,withallaccessories complete and Excluding batteries and wiring complete. 5 kVA OFF LINE UPS ---- ...

Supplying,installation,testing&commissioningof12V.AHbatteriesinpolypropylenecontainerforD.G.sets.Lowmaintenancebatteries, plate type. 150 AH capacity ---- DTS