PROVISION OF STORAGE SHELTER ADJACENT TO ENGINE TEST HOUSE ETH IN TECH AREA AT CVRDE AVADI

Amount

Schedule 'A' Part - I (BUILDINGS AND STRUCTURES) This Schedule (contains under mentioned Sl. item No. 1.01) is not prepriced by MES and the prepriced rate indicated in Col - 5 as `0.00 indicates this fact only.The tenderer is required to quote their rates in Column 6.

Lumpsum price worked out by the contractor for Construction of Shelter For Engine Test House accommodation complete all as shown on drawings and as per specification and all as specified and as directed.The quoted rate also includes for gantry girder with brackets and anchoring bolts for EOT crane all as shown on drawings and as per specification and all as specified and as directed.

Lump sum price worked out by the Contractor for “EXCAVATION, EARTHWORK, SITE CLEARANCE AND AREA DEVELOPMENT ” as listed in Schedule ‘A’ Part - II representing _______ % ______________ percent Above / Below the lump sum price of ₹1,89,422.23 inserted by the MES in Schedule ‘A’ Part - II

Lump sum price worked out by the Contractor for “ ROAD / PATH / HARD STANDING ” as listed in Schedule ‘A’ Part - III representing __________ % ____________ percent Above / Below the lump sum price of ₹ 4,49,763.41 inserted by the MES in Schedule ‘A’ Part - III

Lump sum price worked out by the Contractor for “ LIGHTENING PROTECTION ” as listed in Schedule ‘A’ Part - IV representing __________ % ____________ percent Above / Below the lump sum price of ₹ 85,458.10 inserted by the MES in Schedule ‘A’ Part - IV

Lump sum price worked out by the Contractor for "EXTERNAL ELECTRIC SUPPLY” as listed in Schedule ‘A’ Part - V representing _______ % __________________ percent Above / Below the lump sum price of ₹ 1,59,760.26 inserted by the MES in Schedule ‘A’ Part - V

Lump sum price worked out by the Contractor for "HIGH BAY FITTINGS AND AIR CIRCULATORS” as listed in Schedule ‘A’ Part - VI representing _______ % __________________ percent Above / Below the lump sum price of ₹3,97,522.14 inserted by the MES in Schedule ‘A’ Part - VI

Lump sum price worked out by the Contractor for "INTERNAL ELECTRIC SUPPLY” as listed in Schedule ‘A’ Part - VII representing _______ % __________________ percent Above / Below the lump sum price of ₹1,58,375.42 inserted by the MES in Schedule ‘A’ Part - VII

Schedule 'A' Part - VIII This Schedule is not prepriced by MES and the prepriced rate indicated in Col - 5 as ₹0.00 indicates this fact only. The tenderer is required to quote their rates in Column 6. This Schedule constitutes Sl. Item No. 9.00 to 15.00

Design Fabricating supply and erecting connecting and testing totally enclosed LT cubicle panel board 3 Phase 4 wire system Indoor type single door front opening type, separate compartment for each control gear, cable alley, provision of knock out type plates for various sizes of cables in and out , incoming and out going feeders duly marked on revited plates etc complete CPRI approved factory made fabricated out of 2.0 mm thick CRCA sheet dust and vermin proof IP-52 duly treated through 7 tank pre treatment process and painted with epoxy powder coated mat finish of GREY structural shade colour, built in industrial type locking arrangement , and pre wired with PVC insulated multi stranded copper conductor for controls and monitors, PVC sleeved aluminium strip for connecting MCCBs, Panel mounted on Angle iron frame of suitable size duly painted and embedded in PCC 1:3:6 45 CM below ground level and 15 Cm above ground level and consisting of following :-

Busbar Chamber: Electrically grade Bus bar aluminium of capacity 300 Amps including interconnection of all switch gears duly insulated with colour coded heat shrinkable sleeve and mounted on suitable size of 'F' class insulators made of non hygroscopic, non combustible, track resistant high strength FRP insulators for phases and neural set of 4 for RYB &N -01 set

Incoming (a) MCCB Four Pole 415 Volts 50 Hz 200 Amps 36 KA - 01 No (b) Multifunctional Meter to read V, A, Hz, Kwh, Kvah etc -01 No (c) Indicator LED Type for RYB set of 3 - 01 set Out Goings (a) MCCB Four Pole 415 Volts 50 Hz 125 Amps 16KA - 02 No (b) MCB Four Pole 415 Volts 50 Hz 40 Amps - 03 No (c) MCB SPN 230 Volts 50 Hz 40 Amps - 03 No (d) Provn of Spare compartment for fixing of MCCB of capacity up to 125 Amps - 01 No

Supply and Fix sheet metal enclosure powder coated double door in flush fixed in position suitable for MCCB DB TPN 4 way 415 Volts 50 Hz, for 125 Amps MCCB as incomer and 4 + 4 + 4 No's way to accommodate MCB TPN and testing all as directed. Note: MCCB 125 Amps and MCB's shall be measured and paid separately under relevant items of this schedule

Supply and fixing energy efficient highbay light fitting of 120 Watt including No of LEDs in fittings as per manufacturer's instructions for lighting of 120 watt, epoxy powder coated pressure die cast aluminium housing to act as heat sink for efficient dissipation of heat and toughened glass with IP 66 degree of protection, system luminous efficiency more than 100 lumens/watt individual LED's should have lenses for better throw across and along road, PF not less than 0.9 with voltage range 140 to 270 volt fitting should be provided with inbuilt 10 KV minimum surge protection, short circuit and over voltage protection facility for Driver and fitting accessories such as eye bolts, hooks, nuts and bolts including making electrical connection for cable connection complete all as specified and directed.

Supply and Fix energy efficient wall mounted type Air circulator fans operating on single phase 230 Volts, 50 Hz of size 750 mm sweep with double ball bearing, aerodynamically designed blades to ensure higher air delivery and minimum noise level, mesh guards with powder coating ensure corrosion resistance and thermally protected copper wound motor and a heavy duty gearbox etc including provision of necessary fixing arrangements and connected with suitable gauge copper conductor cable and testing complete all as specified and as directed.

Supply and fix , Earthing complete with galvanized steel earth plate electrode of size 60cm x 60cm x 6 mm thick buried directly in ground (earth pit nt less than 2.25 meter deep below the normal ground level) with top edge of plate not less than 1.5m below normal GL, connected to GI strip 32 mm x 6 mm thick earth lead connected by means of bolts, nuts, washers check nuts made out of galvanized iron or steel all as shown on electrical plate No.3 of SSR Part-I connected to continuous earth wire complete all as specified directed. NOTE : (i) The unit rate shall also include for earth work in hard/dense soil, PCC (1:3:6) type C1 chamber, RCC 1:2:4 type B1 cover 50mm thick reinforced with 8mm dia TMT bars @ 150mm C/C both ways, funnel with watering pipe 20mm medium grade, GI protection pipe light grade 15mm dia and wire mesh, Test point, charcoal dust/breeze etc all specified and directed.

Design, Supply, Install, Testing and Commissioning of Electrically operated over head travelling ( EOT)crane Double Girder of capacity 03 Ton load conforming to IS : 3177 (latest revision ) suitable for Class II duty having Span of lift -15 Mtrs (approx), Height of lift - 6 Mtrs, Bay length of lift - 33 Mtr (approx) suitable for operation on 415 V, 3 Phase, 4 wire , 50 HZ with necessary supporting steel structures with Hoist speed 4 Mtrs/min, Cross travel speed 14 Mtrs/min, Long travel speed 20 Mtrs/min. with micro drive through clutch and geared motor of suitable capacities with control panel, power and controlling cables, confirming to to relevent IS, controlled by pendant push buttons station and radio remote control switch of operation, with and including steel wire rope 8 mm dia, operation system hoist/Cross travel/ Long travel/ electrically operated with pendant DSL system of Shrouded bus bar type, with following specifications complete all as specified and directed.

(d) Electro hydraulic thruster brakes shall be provided with fail safe mechanism for each motion. Two brakes each rated for 1.5 times of motor rated torque shall be provided on all hoist motions and 1 each for LT and CT (e) Wheels ( Both for LT & CT): Wheels shall be double flanged straight tread turning and provided with rotating axel on 'L' type bearing housing support. The hardness of wheel shall be between 275 to 300 BHN. The long travel and cross travel wheels shall be C 55+Mn 75 meterial confirming to BS-970/IS:1570 (f) Wire rope 6 x 36 made of Fiber or Hemp core material of size 8mm dia having number of falls 4 confirmong to IS:2266 and tensile strength 1770 N/mm2. Rope drum will be fabricated type stress releived or seamless pipe duly machined and grooved to accomodate full length of rope in one layer. The drum should be mounted on antifriction ball / roller bearings. The circumferential weld joints shall be tested by 100% R-ray quality (g) Hook is made of EN 3A material type C' shank supported on anti friction thrust bearing and the sleeve pulleys shall be made out of malleable cast iron or fabricated confirming to IS:3815

(h) Gear box shall be totally enclosed type and oil bath lubricated. Gear box body shall be fabricated from MS plate/ cast iron as per IS 210. All gears shall be EN8 material finished teeth cut on accurate hobbing machine. Pinions shall be EN-19/24 meterial and heat - treated. All gears and pinions shall ground type so as to reduce noise levels to the minimum. Gear modules shall conform to IS: 3681 and ratings of gear shall be established as per IS: 4460. (j) Control panels indoor type, made of 2 mm thick CRCA sheet, coated with powder coated paint consiting V3F drive, MCCBs/MCBs, contactors, measuring meters, relays, connectors, busbars if required complete.Standard protection devices for overload and short circuit shall be provided. (k) Complete wiring with flexible PVC insulated multistranded 1100 v grade copper conductor unarmoured cable of suitable sizes confirming to IS 7098 (Part I) 1988. (l) End trucks shall be equipped with spring / rubber buffers and rail sweep for bridge travel. The rail sweep shall be such that it can brush away any object that may fall on the runway. The buffets shall be of substantial design and suitable for engaging the stops at the end of run way.

(m) S&F pendant push button station at an operating voltage of 110 V and IP 65 protection along with radio control remote (n) S&F 2 Nos.of 100 watts LED lamp & light fitting shall be provided under the bridge and 1 Nos. of 100 wattts shall be provided under CT Trolley (o) Hoist shall be provided with both rotary and counter weight type ( Over hoisting and over lowering) Shunt , adjustable type limit switches. Limit switch shall be provided for both CT& LT. Two way lever type for CT and LT in both direction. (p) PVC Flexible festoon type travelling cable system supported on MS trolley moving on C- Rail for cross travel. (q) DSL system with 100 Amps PVC shrouded bus bar type (r) Complete painting of crane with two coats of Enamel paint ( colour - Golden Yellow) after cleaning and one coat of red oxide primer painting , and writing the details of crane, like capacity, date of installation, load test details etc. (s) Full length platform shall be provided at the one end for maintenance purpose and two short length platforms shall be provided on the other side. (t) Hoist speed 4 Mtrs/min, Cross travel 14 Mtrs/min and Long travel 20 Mtrs/min alongwith micro speed of 10% of main speed to be achieved through VVVF drive for all three motions.

(u) Red indication lamp fitting aviation type for indicating crane movement - 01 No (v) Radio remote system with all accessories should be multi speed steps of operations (w) Pendent should be of Die cast Aluminium or Hard un breakable plastic having push buttons for each motion and it shall be hanged in the middle of bridge girder with chrome plated steel chain & duly covered with sleeves. Note for item No 01 (i) Supply and install of gantry rail is inclusive in the qouted rate .(ii) The rate quoted is inclusive of DSL GI shrouded busbar type of suitable capacity to operate in such a way that crane should work simulteneously if required. (iii) The contractor should take electric supply to the cranes from the incoming cable which will be provided. The rate quoted shall be inclusive of DBs, cables upto DSL of crane and connections cost. No extra payment shall be paid by the department. (iv) The original span length shall be taken at site and the design calculation, all technical drawings & specifications as per OEM shall be submitted and take approval from Acccepting Officer before fabrication of crane.NOTE: Construction of gantry girder with brackets and anchoring bolts for EOT crane all as shown on drawings and as per specification is included in lumpsum portion.

Supply and fix , Earthing complete with galvanized steel earth plate electrode of size 60cm x 60cm x 6 mm thick buried directly in ground (earth pit not less than 2.25 meter deep below the normal ground level) with top edge of plate not less than 1.5m below normal GL, connected to GI earth wire 4.0 mm dia as earth lead connected by means of bolts, nuts, washers check nuts made out of galvanized iron or steel all as shown on electrical plate No.3 of SSR Part-I connected to continuous earth wire complete all as specified directed. NOTE-1 : The unit rate shall also include for earth work in hard/dense soil, PCC (1:3:6) type C1 chamber, RCC 1:2:4 type B1 cover 50mm thick reinforced with 8mm dia TMT bars @ 150mm C/C both ways, funnel with watering pipe 20mm medium grade, GI protection pipe light grade 40mm dia and wire mesh, Test point, charcoal dust/breeze etc all specified and directed. Note -2 : Earthing lead and GI protection pipe beyond 7.5 Mtr will be measured and paid separately under relevant item of schedule.

DANUSH INTERIORS AND CONTRACTORS (BID ID -3056163)