SPECIAL REPAIR TO BOYS AND GIRLS TOILETS AT KV NO. 2 AT AF STN ADAMPUR

Amount

PCC type E-2 (1:5:10), using 40 mm graded stone aggregates as in filling & mass concrete, sub base, complete all as specified.

Brick work using bricks as specified in PS-II clause 5.1, straight or curved on plan exceeding 6.00 metre mean radius built in cement mortar (1:6), complete all as specified.

Factory made solid PVC Door frame of size 50mm x 47mm made out of 5mm plain PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening, complete all as specified.

Factory made solid PVC moulded door shutter, 28-30 mm thick (stiles), with 2, 4, or 6 raised panel design with 2 mm thick Moulded PVC Sheet on the front face & 2 mm thick prelam PVC sheet on back face, as shown on page 181 of MES Schedule Part-II, complete all as specified.

Stainless steel 100mm long butt hinges with stainless steel screws, complete all as specified. MAKE :PRAYAG CAT NO. HG-2412 or equivalent make mentioned in Appndix 'B'

Stainless steel, barrel tower bolt, 150 mm long, with stainless steel screws, complete all as specified. MAKE :PRAYAG CAT NO. TBS-2150 or equivalent make mentioned in Appndix 'B'

Stainless steel, handle, 150 mm long, curve shapewith stainless steel screws, complete all as specified. MAKE :PRAYAG CAT NO. DHC-2150 or equivalent make mentioned in Appndix 'B'

Water proofing treatment to floor & vertical surfaces of sunken portion complete comprising the following: - (a) Remove all loose particles along with existing water proofing treatment (any no. of layers) with wire brushes & cleaning the surfaces with water after demolition of floor & lime concrete etc. to the entire satisfaction of EIC. (b) Brushing cement slurry with 1.2 kg of cement per square metre duly blended with & including water proofing compound. (c) 15 mm thick (Average thickness) plaster in cement mortar (1:3) mixed with WP compound on sunken surface including walls. The corner of sunken portion shall be rounded in concave shape and adequate slope shall be made during plastering to accommodate sump pipe and curing the sunken portion with water minimum for 48 Hrs by ponding. (d) Applying 150 micron LDPE sheet laid over a coat of Industrial bitument 85/25 @ 1.20 kg/Sq.m on floor & sides of sunken slab & sealing all joints to the entire satisfaction of Engineer-in-Charge.

Granite jet black shade, 15-18 mm thick, machine cut, machine polished, bedded and jointed with grey cement slurry & pointed with grout of matching shade including necessary cutting over & including 10 mm thick (average thickness) cement mortar (1:4), complete all as specified.

Rounding of / moulding to edges (half round) of stone of any description including rubbing and polishing (Granite finish), complete all as specified.

First quality, glazed ceramic, straight cut/joint free, 6-7 mm thick colored tiles, area of each tile exceeding 0.17 sq.m but not exceeding 0.19 Sq.m, on vertical surfaces such as dado etc over & including 10 mm thick cement mortar (1:4) screed, set and jointed with grey cement slurry and pointed in grout of matching shade of tiles, complete, all as specified.

First quality, non-skid ceramic, straight cut/joint free, 7-8 mm thick colored tiles, area of each tile exceeding 0.11 sq.m but not exceeding 0.18 Sq.m, in floors etc. over & including 15 mm thick cement mortar (1:4) screed, set and jointed with grey cement slurry & pointed with grout of matching shade, complete, all as specified.

Factory made PCC type A-1 chequered tiles, ISI marked (IS:13801), with grey cement & no pigment, 22-25 mm thick, of size 250 mm x 250 mm, in floors, over & including 15 mm thick cement mortar (1:4) screed, set and jointed with grey cement slurry, complete, all as specified.

Rendering 15 mm thick on fair faces of brick work or concrete surfaces, finished even and fair (without using extra cement) on walls in cement mortar (1:6), complete all as specified.

Prepration of plastered wall surfaces complete all as specified and applying the following: - (a) Applying wall care putty, in two coats & smoothening the surfaces with sand papers/ mechanized sanding etc., (preparatory to paint as directed). (b) Two coats of interior acrylic distemper over and including a coat of acrylic emulsion primer.

Steel tubes ‘medium grade’, galvanized with all fittings and fixed to walls and ceilings or laid in floors, including taking up or down existing unserviceable steel tubing and connections, complete all as specified of size: -

15 mm bore

20 mm bore

25 mm bore

Steel tubes ‘medium grade’, galvanized 40 mm bore, cut to pieces and fixed as spout in sunken portion, complete all as specified.

Bib tap, cast copper alloy, chromium plated fancy type, long body with wall flange, quarter turn type, screwed end for iron pipe or for union and fixed, suitable for 15 mm bore pipe, IN REPAIR, complete all as specified.

2-way bib cock, cast copper alloy, chromium plated, with wall flange, quarter turn type, screwed end for iron pipe or for union and fixed, suitable for 15 mm bore pipe, IN REPAIR, complete all as specified.

Angular stop valve/cock, cast copper alloy, chromium plated, with wall flange, quarter turn type, screwed end for iron pipe or for union and fixed, suitable for 15 mm bore pipe, IN REPAIR, complete all as specified.

Centre hole basin mixture pillar mounted tap of 15mm bore dia, cast copper alloy chromium plated, screwed down, high pressure, with long screwed shanks for iron pipe, fixed IN REPAIR, complete. MAKE: PRAYAG Cat No. 6650 or equivalent make mentioned in Appndix 'B'.

Stainless steel round slotted grating with frame, 125 mm size and fixed in position with cement joints, IN REPAIR complete all as specified.

Soap dispenser holder with soap container, complete. MAKE: PRAYAG Cat No. BA-83 or equivalent make mentioned in Appndix 'B'.

Towel rail, stainless steel, glossy finish, 600 mm size and fixed to wall with SS screws & PVC plugs, complete. MAKE: PRAYAG Cat No. BA-10S or equivalent make mentioned in Appndix 'B'.

Grab Bar, cast copper alloy, chromium plated 225 mm size and fixed in position INREPLACEMENT complete.

Toilet paper holder, cast copper alloy, chromium plated, glossy finish and fixed in position, IN REPAIR, complete. MAKE: PRAYAG Cat No. BA-18 or equivalent make mentioned in Appndix 'B'.

Vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm, white, with integral foot rests (excluding flushing cistern and flush pipe), IN REPAIR, complete all as specified.

Vitreous China wash down water closet pan (pedestal pattern), white, including fixing acessories, IN REPAIR, complete all as specified.

PVC water closet seat and white cover with & including mild steel chromium plated hinging device & rag bolts, IN REPAIR, complete all as specified.

Jet spray (L-bend type) stainless steel body with 1.5 metre length braided tube, IN REPAIR complete.

Health faucet CP brass body with wall hook and 1 metre SS tube complete.

PVC flushing cistern 6 litre capacity, syphonic action type, any shade, dual flush, ISI marked with flush pipe and all fixing acessories, IN REPAIR, complete. MAKE: PRAYAG Cat No. 508 or equivalent make mentioned in Appndix 'B'

Vitreous China counter type wash basin, white, size 500 x 400 x 130 mm, with & including cast copper alloy, half or full threaded chromium plated waste coupling suitable for & including 32 mm size PVC waste/discharge pipe, IN REPAIR, complete.

Fancy type 5-6 mm thick looking glass fixed over not less than 6 mm thick PVC ply and approved shade PVC beading not less than 15 mm wide alround with and including all fixing acessories, includiing taking down existing looking glasses (600 x 450 mm size) complete.

PVC connections 15 mm size of length 600 mm with PTMT nuts, IN REPAIR, complete all as specified.

Vitreous China Urinal Pot, half stall type, white of size 345X320X560, with & including cast copper alloy, chromium plated waste coupling half or full threaded suitable for & including 32 mm size PVC waste/discharge pipe, flush cock (lever type) 25 mm size, IN REPAIR, complete. MAKE OF URINAL:PRAYAG CAT NO. 4998 or equivalent make mentioned in Appndix 'B'

High pressure laminate urinal partition not less than 18-19 mm thick of size 450/350 x 900 mm, with and including all fixing acessories, complete.

uPVC pipes, of size 75 mm bore, type-B, ISI marked (IS:13592) single socketed in any length with rubber ring joints, fixed under floors / wall as SWR pipes, IN REPAIR, complete all as specified.

Cast iron soil, waste and vent pipes, spun type, ISI marked (IS:3989), in any length with or without ears, with cement joints, fixed to walls with and including mild steel clamps, or laid under floors, IN REPAIR, complete all as specified, of size: -

75 mm bore pipe

100 mm bore pipe

Cast iron bends (any radius), diminishing pieces or tapers (largrer bore measured) with oval acess door, ISI marked, complete all as specified, suitable for CI soil waste spun pipes, IN REPAIR, of size: -

75 mm bore pipe

100 mm bore pipe

Cast iron branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches with oval access door, ISI marked, complete all as specified, suitable for CI soil waste spun pipes, IN REPAIR, of size: -

75 mm bore pipe

100 mm bore pipe

Cast iron 'P' or 'S' trap, ISI marked, suitable for 100 mm bore CI spun pipes IN REPAIR, complete all as specified.

Cast iron floor trap, 75 mm bore, including jointing to waste pipe set in cement concrete type B-1(1:2:4) of size 200 mm x 200 mm x 250 mm, IN REPAIR, complete all as specified.

Taking down chowkhats or frame not exceeding 1.5 Sq. m each with shutter(s) (without taking off shutters from the frame), complete all as specified.

Taking down chowkhats or frame exceeding 1.5 Sq. m but not exceeding 4 Sq. m each with shutter(s) (without taking off shutters from the frame), complete all as specified.

Taking down shutters of any description exceeding 1.00 sqm but not exceeding 2.00 sqm each and refixing in the same opening after easing adjusting and minor repair complete all as specified.

Taking down cement or cement lime plaster, any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc, complete, all as specified.

Dismantling floor, hearth or wall tiling including cement mortar bedding on brick walls including racking out joints hacking for key and scrubbing removing rubbish from premises, complete all as specified.

Demolition of concrete of any description and in any position not otherwise specifically provided for complete all as specified.

Dismantling of Brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stone-work and precast concrete articles complete all as specified.

PRATHAM TRADERS

N S ENGINEERS

M/S GURBACHAN SINGH