Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹38.9 LAccepted-AOC 6 VISHNU SHREYA COMPLEX PLOT NO 87 87 A SECTOR 50 E OFF PALM BEACH ROAD SEAWOODS NERUL WEST NAVI MUMBAI 400706 | THANE | MAHARASHTRA | 400706 | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹45.5 L+₹6.7 L (17.1%)Rejected-Finance 184 SHIV NAGAR COLONY BHANPUR BHOPAL M P | L2 | Rejected-Finance Highest rate from L1 | |
| 3 | L3₹46.0 L+₹7.1 L (18.4%)Rejected-Finance | L3 | Rejected-Finance Highest rate from L2 |
Tender Value
₹38.3 L
EMD Value
₹76,670
Closing Date
17 Jan 2024, 4:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Superintending Archaeologist
Office of the Superintending Archaeologist, Archaeological Survey of India, Jhansi Circle, Rani Mahal, Jhansi, Uttar Pradesh 284002
As per tender details
2024_ASI_789004_1
5-3/24/2022-23-JHI-C
Open Tender
Civil Works
Works
90 days
Jhansi
Please refer Tender documents.
4 documents required · 4 mandatory
₹0
₹76,670
Yes
25 Jul 2024
5 Jan 2024
19 Jan 2024
5 Jan 2024
17 Jan 2024
5 Jan 2024
5 Jan 2024 - 12 Jan 2024
Amount
Execution of work
Provision for clearing of jungle uprooting rank vegetation, grass, brush wood, unwanted plants and trees and saplings of girth upto the 30 cm measured at a height of 1 m above ground level. Including levelling of ground and removal of rubbish and disposal of refused out of monument. Including all the labour, material and T&P. Required monument area neat and clean.
Provision for dismantling of old damage cracked out of plumb RR Stone masonry in lime or Cement mortar very carefully without damage of adjacent structure. Including stacking of useful material for reusing masonry work and disposal of refused out of monument by mechanical transport. Including all the labour and T&P. Required proper completion of work at the site.
Provision for earth work in excavation in depth 2.10 mtr in depth but exceeding 3.00 mtr in width as well as 10 sq.mt. on plan under foundation and floor base of soil mixed with mooram, kankar, bricks bats and stones etc. required to use of special type of T.& P. as pickaxe & subbles etc. including disposal of excavated soil for filling in foundation trenches and low level area by spreading, levelling and compacting. Including all the labour and T.& P. Required proper completion of work at the site.
Provision for dismantling of ruined/ damage flag stone flooring of thickness 5-7.5cm nominal size laid in lime or cement mortar. Including removal of ruined cracked, damage base concrete. Stacking of serviceable material as flag stone which may be about 80% for reuse in flooring work and stacking of refused with in 60 Mtr. for further disposal of the same out of monument by mechanical transport. Including all the labour and T&P. Required proper completion of work at the site.
Provision for C.R. stone masonry on super structure with lime mortar of ratio 1:6 cement and coarse sand by using proper hammer dressed stone locally available. Including all the labour, supply of material and T & P Required proper completion of work at the site.
Provision for dry Stone pitching work with C.R. Stone of different size pitching work to be laid after carefully ramming and watering of ground surface joints of C.R. Stone to be filled with fine sand/stone dust locally available. Including all labour, supply of material and T. & P. Required proper completion of work at the site.
Provision for laying of flag stone flooring with 50 mm thick (1.20x0.60m) flag stone matching with original colour and texture with mortar of ratio 1:6 cement and coarse sand over 20cm bed of mortar. joints of floor not more than 5 mm thick including pointing of joints of same mortar with mixing of color pigment to match with original structure. Including all labour, supply of material and T. & P. Required proper completion of work at the site.
Provision for laying of Vitrified floor tiles of size 60x60 cm laid on 10 mm thick bed of mortar of ratio 1:4 cement and c-sand of approved class brand as Kajariya/Somani of thickness 9 to 10 mm. including grouting of joints with neat white cement with mixing of desired color pigment as per matching with texture of tile. Including all the supply of material, labour and T&P required proper completion of the work at site.
Provision for laying of Wall tiles of mortar ratio 1:6 Cement and C-Sand of approved class brand as Kajaariya/Somani of thickness 9 to 10 mm. including all the supply of material, labour and T&P required proper completion of the work at site.
Provision for colour washing with oil bound distemper of superior quality by two coat after carefully removing of old layer of paint. before applying oil wall distemper walls finished with one coat of wall care putty and one priming coat. Including all the supply of material, labour and T&P required proper completion of the work at site.
Provision for Painting work on Iron & wood work in small area over previously painted surface by two coat of synthetic enamel paint. Including cleaning and washing of previously painted surface. Including all the labour and T. & P. Required proper completion of work at the site.
Provision for 15 mm nominal thickness cement plaster work with mortar of ratio 1:6 cement and c.sand. Including racking and washing of joints and surface. Including all the labour, supply of material and T. & P. Required proper completion of work at the site.
Provision for laying of 40mm thick ferrow plaster over roof terrace with mortar of ratio 1:4 cement and coarse sand with laying of chicken mash. Plaster work finished with 3-5mm thick floating coat of neet cement. Including all the labour and T. & P. Required proper completion of work at the site
Provision for first class Brick work with composite mortar of ratio 1:6 cement and coars sand including all the labour supply of material & T& P. Requires proper completion of work at the site.
Provision for laying of position machine batched and machine mixed/design mixed Reinforcement Cement Concrete of ratio 1:2:4 cement, c-sand and stone gritt (10 to 20 mm gauge in ratio 1:2) including pumping of concrete to site of laying. Including the cost of centring, shutting & finishing etc. including all the labor, supply of material and T&P required proper completion of the work at the site.
Provision for 15 mm nominal thickness cement plaster work with mortar of ratio 1:6 cement and c.sand. Plaster work finished with 3-5mm thick floating coat of neet cement. Including all the labour and T. & P. Required proper completion of work at the site.
Provision for cartage and disposal of refused (from dismantling, vegetation growth, malva, garbage etc.) from monument to outside of municipal limit. Including loading, unloading cartage, disposal etc. Including all the labour and T.&P. Required proper completion of work at the site.
Provision for removal dismantling of roofing of terracotta tiles (Khaprails) Including ridges, hips, valleys and gutters and stacking of refused within 50mt for further disposal of the same out of municipal limit. Including all the labour, material and T.& P. Required proper completion of work at the site.
Provision for laying of 0.8mm G.I. sheet over wooden skelton, Including refixing of damaged wooden battons which will be about 50%. Lying of brick tiles over GI Sheet with mortar of ratio 1:4 cement and C. Sand also be executed. Including all the supply of material, labour and T&P required proper completion of the work at site
Provision for in environment development as grassing of ground with doob grass and show plants by levelling and ramming of ground with mixing of compost with soil. Including all the labour, material and T&P.
Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long drywall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of drywall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete. (Item as per DSR Vol-1 2021, (12.45.4)
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, with labour and material all complete.
Provision for fixing M.S. Gate with two leaf with angle iron 60x60x10 mm, flat iron 10mm and fabricated as per designed by the department. Including all the supply of materials fabrication and fixing of the same. Required proper completion of work at the site. (details of structural member of 1 leaf of gate) MS angle 60x60x10mm Hoz. 1x3 Nosx1.3m , Cross angle 1x2 Nos x1.5mtr
Provision for erection of scaffolding with scaffolding pipe, challies and other required articles for proper execution of work and removal of the same after work. Including all the labour, supply of material and T & P Required proper completion of work at the site.
Provision for repairing of 32 mm thick panneled door, window and ventilator by replacing of damaged wood and fixtures. Wood should be used sall wood well-seasoned and repair of door as per original fixed. Including all the fixtures and fitting. Including all the labour and T. & P. Required proper completion of work at the site
M/S VIRENDRA KUMAR JAIN
DAMRULAL JAIN
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .